arXiv Science⌕ Search

arXiv subjects

Xingpeng Li

Publications and source records attributed to Xingpeng Li.

At least 37 records · Page 2Linked to original sources

Optimal Assembly of Repurposed Lithium-Ion Battery Packs under Cell Heterogeneity and Screening Uncertainty

The growing supply of retired electric vehicle batteries presents an opportunity for second-life stationary energy storage, but assembling heterogeneous retired cells into reliable packs is challenging due to substantial variation in capacity, DC internal resistance (DCIR), and self-discharge. This paper proposes a robust optimization framework for cell-to-pack assembly of second-life batteries. A topology-screening stage first identifies minimum-cell series-parallel configurations satisfying inverter and energy requirements, reducing the dimensionality of the subsequent assignment problem. For each candidate topology, a mixed-integer linear program selects cells and assigns them along the series string, enforcing power, voltage, and energy requirements as hard constraints while minimizing a normalized, weighted sum of DCIR spread, capacity spread, and self-discharge imbalance. Additionally, measurement uncertainty in capacity and DCIR is modeled as bounded intervals to guarantee feasibility under worst-case parameter deviations. The framework is evaluated on four heterogeneous inventories for a 10 kW/10 kWh stationary backup application. The proposed method satisfies all feasibility requirements in every case, while single-metric sorting heuristics each fail on at least one inventory. Relative to the best single-metric baseline by objective value, it reduces the normalized mismatch objective by 76-87%, demonstrating that jointly optimizing cell matching with application-level feasibility requirements improves heterogeneous second-life pack assembly under screening uncertainty.

eess.SY↗

Diagnosis-Driven Co-planning of Network Reinforcement and BESS for Distribution Grid with High Penetration of Electric Vehicles

While the rapid proliferation of electric vehicles (EVs) accelerates net-zero goals, uncoordinated charging activities impose severe operational challenges on distribution grids, including exacerbated peak loads, thermal overloading, and voltage violations. To overcome the computational intractability of jointly optimizing grid infrastructure reinforcements and Battery Energy Storage System (BESS) installations, this paper proposes a novel three-stage Diagnosis-Driven Co-Planning (DDCP) framework. The methodology integrates a Violation Detection and Quantification (VDQ) model to systematically identify system breaches, and a Violation Mitigation-Based Planning (VMBP) model for optimal BESS allocation. Specifically, Stage I of the DDCP framework diagnoses critical bottleneck lines that render standalone BESS solutions infeasible; Stage II executes targeted physical upgrades exclusively on these bottlenecks; and Stage III finalizes the optimal BESS deployment on the updated network topology. Furthermore, this study quantifies the EV hosting capacity thresholds before and after BESS integration across varying EV adoption rates and base voltages. Finally, a comprehensive comparative analysis evaluates four mitigation approaches: the VDQ-driven cable upgrade (VCU) model, the VMBP model, system-wide voltage uprating, and the proposed DDCP framework. The results demonstrate that the DDCP framework not only resolves the complex joint-optimization hurdle but also achieves superior techno-economic performance in addressing high-EV-penetration challenges.

eess.SY↗

Optimal Microgrid Sizing of Offshore Renewable Energy Sources for Offshore Platforms and Coastal Communities

The global energy landscape is undergoing a transformative shift towards renewable energy and advanced storage solutions, driven by the urgent need for sustainable and resilient power systems. Isolated offshore communities, such as islands and offshore platforms, which traditionally rely on mainland grids or diesel generators, stand to gain significantly from renewable energy integration. Promising offshore renewable technologies include wind turbines, wave and tidal energy converters, and floating photovoltaic systems, paired with a storage solution like battery energy storage systems. This paper introduces a renewable energy microgrid optimizer (REMO), a tool designed to identify the optimal sizes of renewable generation and storage resources for offshore microgrids. A key challenge in such models is accurately accounting for battery degradation costs. To address this, the REMO model integrates a deep neural network-based battery degradation (DNN-BD) module, which factors in variables like ambient temperature, charge/discharge rates, state of charge, depth of discharge and battery health. Simulations on six test regions demonstrate that the REMO-DNN-BD approach minimizes lifetime energy costs while maintaining high reliability and sustainability, making it a viable design solution for offshore microgrid systems.

eess.SY↗

WAKE-NET: A 3D-Wake-Aware Economic Turbine Layout and Cabling Optimization Framework for Multi-Capacity Multi-Hub-Height Wind Farms Serving Grid-Scale and Industrial Power Systems

The global transition towards renewable energy has accelerated the deployment of utility-scale wind farms, increasing the need for accurate performance and economic assessments. Although wind energy offers substantial potential for carbon emission reduction, investment decisions are highly sensitive to predicted annual energy production and economic profitability. Conventionally wind farm analyses often estimate turbine power output based solely on incoming wind conditions, neglecting wake interactions between turbines. These wake effects can significantly reduce downstream turbine performance, leading to overestimation of energy yield and financial returns. This study proposes WAKE-NET, a 3D wake-aware optimization framework that integrates turbine layout optimization, turbine capacity selection, cable routing, and hub height diversification within a unified profit-driven formulation. Unlike traditional approaches that assume a uniform hub height and turbine capacities or ignore wake dynamics, the proposed framework accounts for wake-induced power losses during optimization. A benchmark wake-ignorant model is also evaluated to quantify the impact of neglecting wake interactions. Results indicate that the wake-ignorant optimization can significantly overestimate annual profits, while the use of multiple hub heights and capacities reduce wake overlap and improve spatial utilization. Overall, the findings demonstrate that wake-aware optimization coupled with hub height and capacity diversification provides more reliable energy yield prediction and economic assessment, offering valuable guidance for large-scale wind farm planning and investment.

eess.SY↗

Violation-Informed Spatio-Temporal Adaptive Targeting Framework for EV-Driven Distribution System Expansion Planning

The rapid adoption of electric vehicles (EVs) can cause severe voltage drops and line current overloads in distribution networks, creating an urgent need for scalable expansion planning methods. This paper proposes a computationally efficient violation-informed spatio-temporal adaptive targeting (STAT) framework for EV-driven distribution system expansion planning. The framework first identifies potential voltage and current violations through a violation analysis model, and then mitigates them through a joint optimal expansion planning model that co-optimizes investment decisions for line reconductoring, shunt capacitors, and battery energy storage systems. To reduce computational burden, the proposed STAT-temporal criticality assessment (STAT-TCA) method extracts primitive stress events from annual operating data, derives an initial set of candidate planning horizons from signature-consistent segments, and selects a final transferable critical horizon set through cross-horizon validation based on optimization feasibility and cost. Meanwhile, the proposed STAT-adaptive spatial targeting (STAT-AST) method constructs device-specific spatial features for BESS and SC siting to retain compact yet high-impact candidate bus sets. Case studies on 33-bus and 240-bus distribution systems demonstrate that the proposed STAT framework can substantially reduce the temporal and spatial planning dimensions while preserving planning fidelity. Full-year validation further confirms that the resulting investment plans can eliminate EV-induced voltage and thermal violations while maintaining feasible BESS operations.

eess.SY↗

Learning-Assisted Day-Ahead Energy Scheduling for Frequency-Secure Inverter-Dominated Grids with Grid-Forming Battery Energy Storage Systems

As grid-forming (GFM) battery energy storage systems (BESS) are increasingly deployed to enhance power system inertial response and frequency stability, incorporating their frequency support capabilities into day-ahead energy scheduling (DAES) is essential for achieving both frequency security and operational efficiency. However, accurately determining frequency metrics in grids with coexisting GFM inverters and synchronous generators requires electromagnetic transient (EMT) simulations, which are computationally prohibitive for direct embedding in grid operational optimization models. To bridge the gap between modeling accuracy and computational efficiency, a learning-assisted DAES (LA-DAES) framework is proposed in this work. By leveraging a surrogate model to represent the frequency support dynamics of GFM BESS, the proposed framework ensures frequency security with a reasonable solve time. Comparative results demonstrate that, relative to analytical frequency-constrained DAES, the proposed LA-DAES framework more accurately captures grid frequency metrics and improves the utilization of GFM BESS.

eess.SY↗

Hosting Capacity Assessment and Enhancement for Edge Data Centers in Active Distribution Networks

With the increasing demand for edge computing and AI-driven workloads, integrating small and medium-sized edge data centers into distribution networks has become increasingly important. This paper investigates the hosting capacity of distribution networks for data center integration and identifies the key physical mechanisms that limit the maximum allowable data center load. The baseline analysis shows that data center hosting capacity varies significantly across candidate buses due to network topology and electrical distance. Three dominant limiting mechanisms are identified: current-constrained locations, voltage-constrained locations, and mixed-constrained locations where both current loading and voltage deviation jointly affect hosting capacity. To increase the hosting capacity, this study evaluates multiple flexible resources, including battery energy storage systems (BESS), dispatchable distributed generators (DDG), and static synchronous compensators (STATCOM). Numerical results demonstrate that these resources provide complementary benefits through active power support, sustained local generation, and reactive power compensation, effectively expanding data center hosting capacity in distribution systems.

eess.SY↗

Data Center Spatio-Temporal Load Flexibility in Security-Constrained Unit Commitment for Enhanced Grid Efficiency and Reliability

Data center electricity consumption reached 4.4% of U.S. total in 2023 and is projected to grow to 6.7--12% by 2028, imposing increasing stress on transmission networks while representing a largely untapped source of controllable demand-side flexibility. This paper proposes a modular security-constrained unit commitment (SCUC) framework that coordinates flexible data center workloads with system-level scheduling to reduce renewable curtailment, alleviate congestion, and lower operating costs. Three mixed-integer linear programming (MILP) models are formulated: the Data Center Spatial model (DC-S), enabling instantaneous workload redistribution across geographically distributed sites; the Data Center Temporal model (DC-T), permitting each site to shift its deferrable load across time while preserving the daily energy balance; and the Data Center Spatio-Temporal model (DC-ST), jointly activating both mechanisms and spanning the largest feasible operating region. Case studies on a modified IEEE 24-bus reliability test system show that DC-ST eliminates all base-case and post-contingency transmission violations at a flexibility ratio of 40%, and reduces renewable curtailment by up to 84.4% at 30% relative to the inflexible baseline. Sensitivity analysis further reveals that moderate flexibility levels of 20%--30% already capture most of the achievable benefits, supporting practical deployment with limited operational burden on data center operators.

eess.SY↗

Optimal Loss Reduction in Distribution Networks Using Conservation Voltage Reduction and Network Topology Reconfiguration

Conservation voltage reduction (CVR) and network topology reconfiguration (NTR) are widely employed to improve distribution system performance; however, existing approaches largely treat them independently, overlooking their coupled impact on load demand, voltage profiles, and power flow distribution, thereby limiting their overall effectiveness. This paper proposes a coordinated optimization framework for day-ahead operational planning of distribution networks, integrating CVR and NTR to enhance overall network efficiency and reduce active power losses in radial distribution networks. The problem is formulated as a mixed-integer conic programming model incorporating AC power flow constraints, voltage-dependent load representation, and radiality constraints. CVR is implemented to achieve load reduction through coordinated voltage control, while NTR redistributes line loading via optimal switching of controllable branches. The proposed framework is validated on the IEEE 33 and 123-bus distribution systems under varying load conditions. Results demonstrate that the coordinated approach consistently outperforms independent strategies, achieving up to 20.6% reduction in active power losses while maintaining voltage compliance and improving branch loading uniformity. These findings confirm that coordinated optimization provides an effective and scalable solution for enhancing efficiency in modern distribution networks.

eess.SY↗

Grid Operational Benefit Analysis of Data Center Spatial Flexibility: Congestion Relief, Renewable Energy Curtailment Reduction, and Cost Saving

Data centers are facilities housing computing infrastructure for processing and storing digital information. The rapid expansion of artificial intelligence is driving unprecedented growth in data center capacity, with global electricity demand from data centers projected to double by 2026. This growth creates substantial challenges for power transmission networks, as large concentrated loads can cause congestion and threaten grid reliability. Meanwhile, the intermittent nature of solar and wind generation requires flexible resources to maintain grid reliability and minimize curtailment. This paper assesses whether data center spatial flexibility-the ability to migrate computational workloads geographically-can serve as a grid resource to address these challenges. An optimal power flow model is developed to co-optimize generation dispatch, security reserves, and flexible data center loads. Case studies on a modified IEEE 73-bus system show that inflexible data center placement can lead to severe transmission violations, with line overloads reaching 30.1%. Enabling spatial flexibility mitigates these violations in the studied scenarios and restores system feasibility. This flexibility also reduces solar curtailment by up to 61.0% by strategically reallocating load to solar-rich areas. The results suggest that spatial flexibility offers a viable approach to defer transmission upgrades and enhance renewable utilization.

eess.SY↗

Inertia-Constrained Generation Scheduling: Sample Selection, Learning-Embedded Optimization Modeling, and Computational Enhancement

Day-ahead generation scheduling is typically conducted by solv-ing security-constrained unit commitment (SCUC) problem. However, with fast-growing of inverter-based resources, grid inertia has been dramatically reduced, compromising the dy-namic stability system. Traditional SCUC (T-SCUC), without any inertia requirements, may no longer be effective for renewa-bles-dominated grids. To address this, we propose the active linearized sparse neural network-embedded SCUC (ALSNN-SCUC) model, utilizing machine learning (ML) to incorporate system dynamic performance. A multi-output deep neural net-work (DNN) model is trained offline on strategically-selected data samples to accurately predict frequency stability metrics: locational RoCoF and frequency nadir. Structured sparsity and active ReLU linearization are implemented to prune redundant DNN neurons, significantly reducing its size while ensuring pre-diction accuracy even at high sparsity levels. By embedding this ML-based frequency stability predictor into SCUC as con-straints, the proposed ALSNN-SCUC model minimizes its com-putational complexity while ensuring frequency stability follow-ing G-1 contingency. Case studies show that the proposed ALSNN-SCUC can enforce pre-specified frequency requirements without being overly conservative, outperforming five bench-mark models including T-SCUC, two physics-based SCUC, and two ML-based SCUC. The proposed sparsification and active linearization strategies can reduce the DNN-SCUC computing time by over 95% for both IEEE 24-bus and 118-bus systems, demonstrating the effectiveness and scalability of the proposed ALSNN-SCUC model.

eess.SY↗

Machine Learning-assisted Dynamics-Constrained Day-Ahead Energy Scheduling

TThe rapid expansion of inverter-based resources, such as wind and solar power plants, will significantly diminish the presence of conventional synchronous generators in fu-ture power grids with rich renewable energy sources. This transition introduces in-creased complexity and reduces dynamic stability in system operation and control, with low inertia being a widely recognized challenge. However, the literature has not thoroughly explored grid dynamic performance associated with energy scheduling so-lutions that traditionally only consider grid steady-state constraints. This paper will bridge the gap by enforcing grid dynamic constraints when conducting optimal energy scheduling; particularly, this paper explores locational post-contingency rate of change of frequency (RoCoF) requirements to accommodate substantial inertia reductions. This paper introduces a machine learning-assisted RoCoF-constrained unit commit-ment (ML-RCUC) model designed to ensure RoCoF stability after the most severe generator outage while maintaining operational efficiency. A graph-informed NN (GINN)-based RoCoF predictor is first trained on a high-fidelity simulation dataset to track the highest locational RoCoF, which is then reformulated as mixed-integer linear programming constraints that are integrated into the unit commitment model. Case studies, by solving the optimization problem ML-RCUC and validating its solutions with time-domain simulations, demonstrate that the proposed method can ensure loca-tional RoCoF stability with minimum conservativeness.

eess.SY↗

Optimal Power Scheduling for High Renewables-Integrated Energy Systems with Battery Storage

In high renewables-integrated power systems, irrespective to their sizes, energy storage is commonly included and utilized to mitigate fluctuations from both the load and renewable power generation, ensuring system reliability, among which battery energy storage system (BESS) are experiencing fast-growth in recent years. The BESS systems, predominantly employing lithi-um-ion batteries, have been extensively deployed. The degrada-tion of these batteries significantly affects system efficiency. Deep neural networks can accurately quantify the battery degrada-tion; however, the model complexity hinders their applications in energy scheduling for various power systems at different scales. To address this issue, this paper presents a novel approach, in-troducing a linearized sparse neural network-based battery deg-radation model (SNNBD), specifically tailored to quantify battery degradation based on the scheduled BESS operational profiles. This approach achieves accurate degradation prediction while substantially reducing the complexity associated with a dense neural network model. The computational burden of day-ahead energy scheduling when integrating battery degradation can thus be substantially alleviated. Case studies, conducted on both small-scale microgrids and large-scale bulk power grids, demonstrated the efficiency and suitability of the proposed optimal energy scheduling model that can effectively address battery degrada-tion concerns while optimizing day-ahead energy scheduling op-erations.

eess.SY↗

Frequency-Dynamics-Aware Economic Dispatch with Optimal Grid-Forming Inverter Allocation and Reserved Power Headroom

The high penetration of inverter-based resources (IBRs) reduces system inertia, leading to frequency stability concerns, especially during synchronous generator (SG) outages. To maintain frequency dynamics within secure limits while ensuring economic efficiency, frequency-constrained optimal power flow (FCOPF) is employed. However, existing studies either neglect the frequency support capability and allocation of grid-forming (GFM) IBRs or suffer from limited accuracy in representing frequency dynamics due to model simplifications. To address this issue, this paper proposes a deep learning (DL)-based FCOPF (DL-FCOPF) framework. A DL model is first developed as a predictor to accurately estimate frequency-related metrics: the required reserved headroom and allocation of GFM IBRs, the rate of change of frequency and frequency nadir. After being trained with data obtained from electromagnetic transient simulations, the DL model is reformulated and incorporated into FCOPF. Case studies conducted on two test systems demonstrate the effectiveness of the proposed approach. Compared with the traditional OPF and linear FCOPF benchmarks, the DL-FCOPF can optimally coordinate SGs and IBRs with minimum cost, achieving desired frequency response, within an acceptable computing time. Further-more, sensitivity analyses are conducted to identify the most suit-able structure and linearization approach of the DL-based frequency predictor.

eess.SY↗

Data-Driven EV Charging Load Profile Estimation and Typical EV Daily Load Dataset Generation

Widespread electric vehicle (EV) adoption introduces new challenges for distribution grids due to large, localized load increases, stochastic charging behavior, and limited data availability. This paper proposes two data-driven methods to estimate residential EV charging profiles using real-world customer meter data from CenterPoint Energy serving the Houston area. The first approach applies a least-squares estimation to extract average charging rates by comparing aggregated EV and non-EV meter data, enabling a statistical method for starting and ending charge times. The second method isolates EV load from meter profiles and applies a kernel density estimation (KDE) to develop a probabilistic charging model. Both methods produce a distinct "u-shaped" daily charging profile, with most charging occurring overnight. The validated profiles offer a scalable tool for utilities to better anticipate EV-driven demand increases and support proactive grid planning.

eess.SY↗

ADMM Penalty Parameter Evaluation for Networked Microgrid Energy Management

The alternating direction method of multipliers (ADMM) is a powerful algorithm for solving decentralized optimization problems including networked microgrid energy management (NetMEM). However, its performance is highly sensitive to the selection of its penalty parameter \r{ho}, which can lead to slow convergence, suboptimal solutions, or even algorithm divergence. This paper evaluates and compares three district ADMM formulations to solve the NetMEM problem, which explore different methods to determine appropriate stopping points, aiming to yield high-quality solutions. Furthermore, an adaptive penalty heuristic is also incorporated into each method to analyze its potential impact on ADMM performance. Different case studies on networks of varying sizes demonstrate that an objective-based ADMM approach, denominated as OB-ADMM, is significantly more robust to the choice of \r{ho}, consistently yielding solutions closer to the centralized optimal benchmark by preventing premature algorithm stopping.

eess.SY↗

A Scenario-based Stochastic Model of using BESS-based Virtual Transmission Lines in Day-Ahead Unit Commitment

The rapid increase in renewable energy sources (RES) implementation in the power system creates more severe network congestion, which may reduce grid operation efficiency and cause renewable curtailment. Deterministic optimization for the unit commitment shows that battery energy storage system (BESS)-based Virtual Transmission Line (VTL), as an alternative to physical transmission lines, can offer a quick solution for congestion relief, reduced operational costs, and lowered renewable curtailment. This paper aims to evaluate the benefits of VTL when considering Renewable Energy Sources uncertainty. Particularly, this work proposes a scenario-based stochastic security-constrained unit commitment model considering VTL, referred to as SSCUC-VTL. It incorporates the forecast error of RES into the commitment decision for systems with VTL. The performance of applying the VTL strategy is compared to that of adding a new physical transmission line and a standalone BESS. A case study has been conducted on an enhanced IEEE 24-bus test system. The simulation results demonstrate that VTL provides 23% more operational cost reduction than the physical transmission line, and up to 67% more congestion relief than the standalone BESS in a power system with solar and wind generation.

eess.SY↗

Grid-Edge Energy-Flexible Technologies: A Comparative Analysis Across Generators, Loads, and Energy Storage Systems

This review analysis presents a comprehensive exploration of energy flexibility in modern power systems. It examines the roles and mechanisms of flexible technologies across three main categories: generators, energy storage systems (ESS), and loads. Energy flexibility is defined as the ability to dynamically adjust supply and/or demand in response to grid conditions to maintain balance and stability. This is of particular importance to facilitate the integration of the growing variable renewable energy sources (RES) into modern power grids. Additionally, traditional supply-side mechanisms to maintain balance and stability are complemented by advancements in demand-side management and demand response strategies, which enable loads to adjust consumption patterns and schedules in response to grid requirements. ESS are also explored to further enhance flexibility by absorbing excess generation and/or supplying large load increases that are not able to be met by the less flexible resources. This paper also explores specific flexibility technologies, examining their characteristics, control strategies, advantages, and limitations. Energy flexibility services are also categorized into intermittency mitigation, peak shaving, and energy reserve provisioning. Each service is supported by case studies and examples demonstrating how different resources respond to varying conditions. Ultimately, the findings and reviews of the various flexible resources in this paper provide a roadmap for optimizing energy flexibility across diverse resource types, paving the way for a more sustainable and resilient energy future.

eess.SY↗