arXiv Science⌕ Search

arXiv subjects

Xingpeng Li

Publications and source records attributed to Xingpeng Li.

At least 55 records · Page 3Linked to original sources

Approximating CCCV charging using SOC-dependent tapered charging power constraints in long-term microgrid planning

Traditional long-term microgrid planning models assume constant power charging for battery energy storage systems (BESS), overlooking efficiency losses that occur toward the end of charge due to rising internal resistance. While this issue can be mitigated at the cell level using constant current-constant voltage (CCCV) charging, it is impractical at the pack level in large-scale systems. However, battery management systems and inverter controls can emulate this effect by tapering charging power at high state-of-charge (SOC) levels, trading off charging speed for improved efficiency and reduced thermal stress. Ignoring this behavior in planning models can lead to undersized batteries and potential reliability issues. This paper proposes a tractable and scalable approach to approximate CCCV behavior using SOC-dependent tapered charging power (TCP) constraints. A MATLAB-based proof of concept demonstrates the energy delivery and efficiency benefits of tapering. The method is integrated into a long-term planning framework and evaluated under a synthetic load and solar profile. Results show tapering significantly affects BESS sizing, cost, and reliability under dynamic operating conditions that demand fast charging. These findings highlight tapering as a critical modeling factor for accurately capturing BESS performance in long-term microgrid planning.

eess.SY↗

A Black Start Strategy for Hydrogen-integrated Renewable Grids with Energy Storage Systems

With the increasing integration of renewable energy, the reliability and resilience of modern power systems are of vital significance. However, large-scale blackouts caused by natural disasters or equipment failures remain a significant threat, necessitating effective restoration strategies. This study proposes novel black start models for modern power systems that integrate fuel cells and battery storage, recognizing their distinct characteristics and contributions to grid resilience. These models specifically address the restoration of electrical grids, including the energization paths and time of the transmission network, while accounting for the unique power output traits of fuel cells and the energy storage capacity of batteries as black start resources. Black start simulations, comparing the generator startup sequence (GSUS) with fuel cell versus battery systems, are performed on the IEEE 39-bus system. We conduct sensitivity analyses on fuel cell capacity, battery storage capacity, initial state of charge (SOC), and resource locations to identify optimal scenarios for black start operations.

eess.SY↗

A Synthetic Texas Power System with Time-Series Weather-Dependent Spatiotemporal Profiles

We developed a synthetic Texas 123-bus backbone transmission system (TX-123BT) with spatio-temporally correlated grid profiles of solar power, wind power, dynamic line ratings and loads at one-hour resolution for five continuous years, which demonstrates unique advantages compared to conventional test cases that offer single static system profile snapshots. Three weather-dependent models are used to create the hourly wind power productions, solar power productions, and dynamic line ratings respectively. The actual historical weather information is also provided along with this dataset, which is suitable for machine learning models. Security-constrained unit commitment is conducted on TX-123BT daily grid profiles and numerical results are compared with the actual Texas system for validation. The created hourly DLR profiles can cut operating cost from USD 8.09 M to USD 7.95 M (-1.7 %), raises renewable dispatch by 1.3 %, and lowers average LMPs from USD 18.66 to USD 17.98 /MWh (-3.6 %). Two hydrogen options -- a 200 MW dual hub and a 500 MW hydrogen-energy transmission and conversion system -- reduce high-load Q3 daily costs by 13.9 % and 14.1 %, respectively. Sensitivity tests show that suppressing the high-resolution weather-driven profiles can push system cost up by as much as 15 %, demonstrating the economic weight of temporal detail.

eess.SY↗

Constraints and Variables Reduction for Optimal Power Flow Using Hierarchical Graph Neural Networks with Virtual Node-Splitting

Power system networks are often modeled as homogeneous graphs, which limits the ability of graph neural network (GNN) to capture individual generator features at the same nodes. By introducing the proposed virtual node-splitting strategy, generator-level attributes like costs, limits, and ramp rates can be fully captured by GNN models, improving GNN's learning capacity and prediction accuracy. Optimal power flow (OPF) problem is used for real-time grid operations. Limited timeframe motivates studies to create size-reduced OPF (ROPF) models to relieve the computational complexity. In this paper, with virtual node-splitting, a novel two-stage adaptive hierarchical GNN is developed to (i) predict critical lines that would be congested, and then (ii) predict base generators that would operate at the maximum capacity. This will substantially reduce the constraints and variables needed for OPF, creating the proposed ROPFLG model with reduced monitor lines and reduced generator-specific variables and constraints. Two ROPF models, ROPFL and ROPFG, with just reduced lines or generators respectively, are also implemented as additional benchmark models. Case studies show that the proposed ROPFLG consistently outperforms the benchmark full OPF (FOPF) and the other two ROPF methods, achieving significant computational time savings while reliably finding optimal solutions.

eess.SY↗

Linearization of ReLU Activation Function for Neural Network-Embedded Optimization: Optimal Day-Ahead Energy Scheduling

Recently, neural networks have been widely applied in the power system area. They can be used for better predicting input information and modeling system performance with increased accuracy. In some applications such as battery degradation neural network-based microgrid day-ahead energy scheduling, the input features of the trained learning model are variables to be solved in optimization models that enforce limits on the output of the same learning model. This will create a neural network-embedded optimization problem; the use of nonlinear activation functions in the neural network will make such problems extremely hard to solve if not unsolvable. To address this emerging challenge, this paper investigated different methods for linearizing the nonlinear activation functions with a particular focus on the widely used rectified linear unit (ReLU) function. Four linearization methods tailored for the ReLU activation function are developed, analyzed and compared in this paper. Each method employs a set of linear constraints to replace the ReLU function, effectively linearizing the optimization problem, which can overcome the computational challenges associated with the nonlinearity of the neural network model. These proposed linearization methods provide valuable tools for effectively solving optimization problems that integrate neural network models with ReLU activation functions

cs.LG↗

A Deep Neural Network-based Frequency Predictor for Frequency-Constrained Optimal Power Flow

Rate of change of frequency (RoCoF) and frequency nadir should be considered in real-time frequency-constrained optimal power flow (FCOPF) to ensure frequency stability of the modern power systems. Since calculating the frequency response is complex, deep neural network (DNN) could be adopted to capture the nonlinearities and estimate those two metrics accurately. Therefore, in this paper, a DNN-based frequency predictor is developed with the training data obtained from time-domain simulations using PSCAD/EMTDC. Subsequently, it is reformulated using a set of mixed-integer linear programming formulations and then embedded into the FCOPF framework as constraints to ensure grid frequency stability, creating the proposed DNN-FCOPF model. Two benchmark models, a traditional OPF without any frequency constraints and a linear system-wide RoCoF-constrained FCOPF, are also implemented to gauge the proposed DNN-FCOPF. Finally, the solutions obtained with these three models are compared and evaluated with time-domain simulations using PSCAD under various load profiles, demonstrating the effectiveness of the proposed DNN-FCOPF.

eess.SY↗

Analysis of Learning-based Offshore Wind Power Prediction Models with Various Feature Combinations

Accurate wind speed prediction is crucial for designing and selecting sites for offshore wind farms. This paper investigates the effectiveness of various machine learning models in predicting offshore wind power for a site near the Gulf of Mexico by analyzing meteorological data. After collecting and preprocessing meteorological data, nine different input feature combinations were designed to assess their impact on wind power predictions at multiple heights. The results show that using wind speed as the output feature improves prediction accuracy by approximately 10% compared to using wind power as the output. In addition, the improvement of multi-feature input compared with single-feature input is not obvious mainly due to the poor correlation among key features and limited generalization ability of models. These findings underscore the importance of selecting appropriate output features and highlight considerations for using machine learning in wind power forecasting, offering insights that could guide future wind power prediction models and conversion techniques.

eess.SP↗

Enhancing Optimal Microgrid Planning with Adaptive BESS Degradation Costs and PV Asset Management: An Iterative Post-Optimization Correction Framework

The transition to renewable energy has positioned photovoltaic (PV) systems and battery energy storage systems (BESS) as essential assets in microgrids, particularly for remote installations. However, traditional planning models often neglect dynamic degradation costs or rely on complex or non-linear approaches, limiting their scalability and practical applicability. This paper introduces a microgrid planning model that integrates adaptive degradation cost modeling to enable accurate, efficient, and scalable long-term resource allocation. The proposed model employs the iterative post-optimization correction (IPOC) framework, solving a sequence of mixed-integer linear programming problems. Each iteration refines BESS degradation costs based on observed depth-of-discharge profiles and incorporates PV degradation costs to ensure realistic asset performance assessments. Sensitivity analysis of PV and BESS capital costs further underscores the model's robustness under varying economic conditions, with the IPOC framework achieving up to ~1% additional cost savings for the given test system compared to static approaches. The results demonstrate that by iteratively adjusting degradation penalties based on actual usage, the methodology optimizes BESS performance, ensures precise resource allocation, resolves issues of under- or overutilization, enhances system reliability, and facilitates scalable, sustainable microgrid planning.

eess.SY↗

Evaluation of Battery Energy Storage System to Provide Virtual Transmission Service

An immediate need in the transmission system is to find alternative solutions that improve system operation and defer the need for new transmission lines. This study comprehensively evaluates the performance and economic benefits of short-term operation of using battery energy storage systems (BESS) as virtual transmission (VT) to promote power transfer across distant regions. Specifically, this work implements various day-ahead energy scheduling models to analyze the impact of VT on system operation cost, network congestion, model computational time, and market performance. The performance of VT is compared with three alternative network congestion mitigation methods, including building new high-voltage physical transmission lines, cost-driven battery energy storage systems, and network reconfiguration, as well as combinations of two of the aforementioned methods. The benchmark dayahead scheduling model is a traditional security-constrained unit commitment model without system upgrades or other network congestion mitigation. Numerical simulations conducted on the IEEE 24-bus system demonstrate that VT provides a 14% operational cost reduction and 34% congested line relief compared to the base case. Compared to other examined schemes, VT is the only one comparable to physical transmission lines that can provide satisfying congestion relief and operation cost reduction without significantly sacrificing computing time and load payment.

eess.SY↗

Comparative Analysis of Machine Learning Models for Short-Term Distribution System Load Forecasting

Accurate electrical load forecasting is crucial for optimizing power system operations, planning, and management. As power systems become increasingly complex, traditional forecasting methods may fail to capture the intricate patterns and dependencies within load data. Machine learning (ML) techniques have emerged as powerful alternatives, offering superior prediction accuracy and the ability to model non-linear and complex temporal relationships. This study presents a comprehensive comparison of prominent ML models: feedforward neural networks, recurrent neural networks, long short-term memory networks, gated recurrent units, and the attention temporal graph convolutional network; for short-term load forecasting of the Energy Corridor distribution system in Houston, Texas. Using a 24-hour look-back window, we train the models on datasets spanning one and five years, to predict the load demand for the next hour and assess performance. Our findings aim to identify the most effective ML approach for accurate load forecasting, contributing to improved grid reliability and system optimization.

eess.SY↗

Assessing the Impact of Electric Vehicle Charging on Residential Distribution Grids

To achieve net-zero carbon emissions, electrification in the transportation sector plays an important role. Significant increase of electric vehicles (EV) has been observed nationally and globally. While the transition to EVs presents substantial environmental benefits, it would lead to several challenges to the power grid due to EV charging activities. Growing EVs greatly increase peak loads on residential grids, particularly during evening charging periods. This surge can result in operational challenges, including greater voltage drops, increased power losses, and potential overloading violations, compromising grid reliability and efficiency. This study focuses on determining ampacity violations, and analyzing line loading levels in a 240-bus distribution system with 1120 customers, located in the Midwest U.S. By simulating a range of charging scenarios and evaluating EV chargers with varying power capacities under different distribution system voltage levels, this research aims to identify lines at risk of ampacity violations for various EV charging penetration rates up to 100%. The findings will provide valuable insights for utilities and grid operators, informing strategies for voltage level adjustments and necessary infrastructure reinforcements to effectively accommodate the growing energy demands associated with widespread EV adoption.

eess.SY↗

Hierarchical Deep Learning Model for Degradation Prediction per Look-Ahead Scheduled Battery Usage Profile

Batteries can effectively improve the security of energy systems and mitigate climate change by facilitating wind and solar power. The installed capacity of battery energy storage system (BESS), mainly the lithium ion batteries are increasing significantly in recent years. However, the battery degradation cannot be accurately quantified and integrated into energy management system with existing heuristic battery degradation models. This paper proposed a hierarchical deep learning based battery degradation quantification (HDL-BDQ) model to quantify the battery degradation given scheduled BESS daily operations. Particularly, two sequential and cohesive deep neural networks are proposed to accurately estimate the degree of degradation using inputs of battery operational profiles and it can significantly outperform existing fixed or linear rate based degradation models as well as single-stage deep neural models. Training results show the high accuracy of the proposed system. Moreover, a learning and optimization decoupled algorithm is implemented to strategically take advantage of the proposed HDL-BDQ model in optimization-based look-ahead scheduling (LAS) problems. Case studies demonstrate the effectiveness of the proposed HDL-BDQ model in LAS of a microgrid testbed.

eess.SY↗

Graph Neural Network-Accelerated Network-Reconfigured Optimal Power Flow

Optimal power flow (OPF) has been used for real-time grid operations. Prior efforts demonstrated that utilizing flexibility from dynamic topologies will improve grid efficiency. However, this will convert the linear OPF into a mixed-integer linear programming network-reconfigured OPF (NR-OPF) problem, substantially increasing the computing time. Thus, a machine learning (ML)-based approach, particularly utilizing graph neural network (GNN), is proposed to accelerate the solution process. The GNN model is trained offline to predict the best topology before entering the optimization stage. In addition, this paper proposes an offline pre-ML filter layer to reduce GNN model size and training time while improving its accuracy. A fast online post-ML selection layer is also proposed to analyze GNN predictions and then select a subset of predicted NR solutions with high confidence. Case studies have demonstrated superior performance of the proposed GNN-accelerated NR-OPF method augmented with the proposed pre-ML and post-ML layers.

eess.SY↗

Metamorphic Testing of Image Captioning Systems via Image-Level Reduction

The Image Captioning (IC) technique is widely used to describe images in natural language. Recently, some IC system testing methods have been proposed. However, these methods still rely on pre-annotated information and hence cannot really alleviate the oracle problem in testing. Besides, their method artificially manipulates objects, which may generate unreal images as test cases and thus lead to less meaningful testing results. Thirdly, existing methods have various requirements on the eligibility of source test cases, and hence cannot fully utilize the given images to perform testing. To tackle these issues, in this paper, we propose REIC to perform metamorphic testing for IC systems with some image-level reduction transformations like image cropping and stretching. Instead of relying on the pre-annotated information, REIC uses a localization method to align objects in the caption with corresponding objects in the image, and checks whether each object is correctly described or deleted in the caption after transformation. With the image-level reduction transformations, REIC does not artificially manipulate any objects and hence can avoid generating unreal follow-up images. Besides, it eliminates the requirement on the eligibility of source test cases in the metamorphic transformation process, as well as decreases the ambiguity and boosts the diversity among the follow-up test cases, which consequently enables testing to be performed on any test image and reveals more distinct valid violations. We employ REIC to test five popular IC systems. The results demonstrate that REIC can sufficiently leverage the provided test images to generate follow-up cases of good reality, and effectively detect a great number of distinct violations, without the need for any pre-annotated information.

cs.SE↗

Transmission Expansion Planning for Renewable-energy-dominated Power Grids Considering Climate Impact

As renewable energy is becoming the major resource in future grids, the weather and climate can have a higher impact on grid reliability. Transmission expansion planning (TEP) has the potential to reinforce a transmission network that is suitable for climate-impacted grids. In this paper, we propose a systematic TEP procedure for climate-impacted renewable energy-enriched grids. Particularly, this work developed an improved model for TEP considering climate impact (TEP-CI) and evaluated the system reliability with the obtained transmission investment plan. Firstly, we created climate-impacted spatio-temporal future grid data to facilitate the TEP-CI study, which includes the future climate-dependent renewable production as well as the dynamic rating profiles of the Texas 123-bus backbone transmission system (TX-123BT). Secondly, we proposed the TEP-CI which considers the variation in renewable production and dynamic line rating, and obtained the investment plan for future TX-123BT. Thirdly, we presented a customized security-constrained unit commitment (SCUC) specifically for climate-impacted grids. The future grid reliability under various investment scenarios is analyzed based on the daily operation conditions from SCUC simulations. The whole procedure presented in this paper enables numerical studies on grid planning considering climate impacts. It can also serve as a benchmark for other TEP-CI research and performance evaluation.

eess.SY↗

LSTM-Based Net Load Forecasting for Wind and Solar Power-Equipped Microgrids

The rising integration of variable renewable energy sources (RES), like solar and wind power, introduces considerable uncertainty in grid operations and energy management. Effective forecasting models are essential for grid operators to anticipate the net load - the difference between consumer electrical demand and renewable power generation. This paper proposes a deep learning (DL) model based on long short-term memory (LSTM) networks for net load forecasting in renewable-based microgrids, considering both solar and wind power. The model's architecture is detailed, and its performance is evaluated using a residential microgrid test case based on a typical meteorological year (TMY) dataset. The results demonstrate the effectiveness of the proposed LSTM-based DL model in predicting the net load, showcasing its potential for enhancing energy management in renewable-based microgrids.

eess.SY↗

Solar Power Generation Profile Estimation for Lunar Surface Solar PV Systems

As NASA prepares to carry out its Artemis lunar missions, the design and planning of robust power systems tailored to the lunar environment become necessary and urgent. Solar photovoltaic (PV) systems are among the most suitable power generators for lunar applications given the abundant solar irradiance the lunar surface receives as a result of the lack of an atmosphere. However, the vastly different environmental conditions of the moon compared to those on Earth call for special reconsiderations to the traditional PV power output models used for terrestrial applications. The substantially wider range of temperatures on the moon combined with the absence of atmosphere implies the PV will operate at very different thermal conditions. Therefore, this paper proposes a PV power output model that determines PV cell temperature on the lunar surface based on lunar ambient temperature as well as solar irradiance, while also capturing these special lunar conditions. The model is based on thermal exchange via the three main heat transfer paths: heat radiation, absorption, and convection. Moreover, four different array configurations are presented and compared to determine the most suitable choice based on energy generation and complexity for different locations around the moon.

physics.space-ph↗

N-1 Reduced Optimal Power Flow Using Augmented Hierarchical Graph Neural Network

Optimal power flow (OPF) is used to perform generation redispatch in power system real-time operations. N-1 OPF can ensure safe grid operations under diverse contingency scenarios. For large and intricate power networks with numerous variables and constraints, achieving an optimal solution for real-time N-1 OPF necessitates substantial computational resources. To mitigate this challenge, machine learning (ML) is introduced as an additional tool for predicting congested or heavily loaded lines dynamically. In this paper, an advanced ML model known as the augmented hierarchical graph neural network (AHGNN) was proposed to predict critical congested lines and create N-1 reduced OPF (N-1 ROPF). The proposed AHGNN-enabled N-1 ROPF can result in a remarkable reduction in computing time while retaining the solution quality. Several variations of GNN-based ML models are also implemented as benchmark to demonstrate effectiveness of the proposed AHGNN approach. Case studies prove the proposed AHGNN and the associated N-1 ROPF are highly effective in reducing computation time while preserving solution quality, highlighting the promising potential of ML, particularly GNN in enhancing power system operations.

eess.SY↗