arXiv subjects

Xiaolin Wang

Publications and source records attributed to Xiaolin Wang.

At least 55 records · Page 3Linked to original sources

arXiv2025

Quantifying urban and landfill methane emissions in the United States using TROPOMI satellite data

Urban areas are major sources of methane due to population needs for landfills, natural gas distribution, wastewater treatment, and residential combustion. Here we apply an inversion of TROPOMI satellite observations of atmospheric methane to quantify and attribute annual methane emissions at 12x12 km2 resolution for 12 major US urban areas in 2022. The US Environmental Protection Agency Greenhouse Gas Inventory (EPA GHGI) is used as prior estimate. Our results indicate that the GHGI underestimates methane emissions by 80% on average for the 12 urban areas, with 22%-290% underestimations in most urban areas, except Los Angeles and Cincinnati where emissions are overestimated by 32%-37%. This is corroborated by independent surface-based observations in the Northeast Corridor and Los Angeles. Landfills are the principal cause of urban emission underestimates, with downstream gas activities contributing to a lesser extent than previously found. Examination of individual landfills other than in Los Angeles shows that emissions reported by facilities with gas collection and control systems to the Greenhouse Gas Reporting Program (GHGRP) and used in the GHGI are too low by a factor of 4 when using the prevailing recovery-first reporting method. This is because GHGRP-estimated gas collection efficiencies (average 70%, range 40-87%) are much higher than inferred from our work (average 38%, range 5-90%). Los Angeles landfills have much higher collection efficiencies (average 78% in GHGRP; 85% in our work) than elsewhere in the US, suggesting that operational practices there could help inform methane mitigation in other urban areas.

physics.ao-ph↗

arXiv2025

Detection-Friendly Nonuniformity Correction: A Union Framework for Infrared UAVTarget Detection

Infrared unmanned aerial vehicle (UAV) images captured using thermal detectors are often affected by temperature dependent low-frequency nonuniformity, which significantly reduces the contrast of the images. Detecting UAV targets under nonuniform conditions is crucial in UAV surveillance applications. Existing methods typically treat infrared nonuniformity correction (NUC) as a preprocessing step for detection, which leads to suboptimal performance. Balancing the two tasks while enhancing detection beneficial information remains challenging. In this paper, we present a detection-friendly union framework, termed UniCD, that simultaneously addresses both infrared NUC and UAV target detection tasks in an end-to-end manner. We first model NUC as a small number of parameter estimation problem jointly driven by priors and data to generate detection-conducive images. Then, we incorporate a new auxiliary loss with target mask supervision into the backbone of the infrared UAV target detection network to strengthen target features while suppressing the background. To better balance correction and detection, we introduce a detection-guided self-supervised loss to reduce feature discrepancies between the two tasks, thereby enhancing detection robustness to varying nonuniformity levels. Additionally, we construct a new benchmark composed of 50,000 infrared images in various nonuniformity types, multi-scale UAV targets and rich backgrounds with target annotations, called IRBFD. Extensive experiments on IRBFD demonstrate that our UniCD is a robust union framework for NUC and UAV target detection while achieving real-time processing capabilities. Dataset can be available at https://github.com/IVPLaboratory/UniCD.

cs.CV↗

arXiv2025

Turán problems for suspension of a balanced tree

The Turán number $\ex(n,H)$ is the maximum number of edges that an $n$-vertex $H$-free graph can have. The suspension $\widehat{H}$ is obtained from $H$ by adding a new vertex which is adjacent to all vertices of $H$ and a tree is balanced if the sizes of its two color classes differ at most $1$. In this paper, we obtain a sharp bound of $\ex(n,\widehat{T})$ when $n\ge 4(4k)^6$ based on the Erdős-Sós conjecture. We also show the bound is sharp for infinitely many $n$ and characterize all extremal graphs. In particular, if $T$ satisfies some conditions such as $T$ contains a matching covering all vertices in one color class, then the bound is sharp for all $n$. This is a new class of graphs whose decomposition family does not contain a linear forest but we still can determine its Turán number.

math.CO↗

arXiv2025

Memory Offloading for Large Language Model Inference with Latency SLO Guarantees

Offloading large language models (LLMs) state to host memory during inference promises to reduce operational costs by supporting larger models, longer inputs, and larger batch sizes. However, the design of existing memory offloading mechanisms does not take latency service-level objectives (SLOs) into consideration. As a result, they either lead to frequent SLO violations or underutilize host memory, thereby incurring economic loss and thus defeating the purpose of memory offloading. This paper presents Select-N, a latency-SLO-aware memory offloading system for LLM serving. A key challenge in designing Select-N is to reconcile the tension between meeting SLOs and maximizing host memory usage. Select-N overcomes it by exploiting a unique characteristic of modern LLMs: during serving, the computation time of each decoder layer is deterministic. Leveraging this, Select-N introduces offloading interval, an internal tunable knob that captures the tradeoff between SLOs and host memory usage, thereby reducing the aforementioned challenge to pick an optimal offloading interval. With that, Select-N proposes a two-stage approach to automatically pick the offloading interval. The first stage is offline that generates the range of optimal offloading interval, while the second stage adjusts offloading interval at the granularity of inference iteration based on runtime hardware status. Our evaluation shows that Select-N consistently meets SLOs and improves the serving throughput over existing mechanisms by 1.85X due to maximizing the use of host memory.

cs.DC↗

arXiv2024

Three-Parameter Approximations of Sums of Locally Dependent Random Variables via Stein's Method

Let $\{X_{i}, i\in J\}$ be a family of locally dependent non-negative integer-valued random variables with finite expectations and variances. We consider the sum $W=\sum_{i\in J}X_i$ and use Stein's method to establish general upper error bounds for the total variation distance $d_{TV}(W, M)$, where $M$ represents a three-parameter random variable. As a direct consequence, we obtain a discretized normal approximation for $W$. As applications, we study in detail four well-known examples, which are counting vertices of all edges point inward, birthday problem, counting monochromatic edges in uniformly colored graphs, and triangles in the Erdős-Rényi random graph. Through delicate analysis and computations, we obtain sharper upper error bounds than existing results.

math.PR↗

arXiv2024

A Novel Extensible Simulation Framework for CXL-Enabled Systems

Compute Express Link (CXL) serves as a rising industry standard, delivering high-speed cache-coherent links to a variety of devices, including host CPUs, computational accelerators, and memory devices. It is designed to promote system scalability, enable peer-to-peer exchanges, and accelerate data transmissions. To achieve these objectives, the most recent CXL protocol has brought forth several innovative features, such as port-focused routing, device-handled coherence, and PCIe 6.0 compatibility. However, due to the limited availability of hardware prototypes and simulators compatible with CXL, earlier CXL research has largely depended on emulating CXL devices using remote NUMA nodes. Unfortunately, these NUMA-based emulators have difficulties in accurately representing the new features due to fundamental differences in hardware and protocols. Moreover, the absence of support for non-tree topology and PCIe links makes it complex to merely adapt existing simulators for CXL simulation. To overcome these problems, we introduce ESF, a simulation framework specifically designed for CXL systems. ESF has been developed to accurately reflect the unique features of the latest CXL protocol from the ground up. It uses a specialized interconnect layer to facilitate connections within a wide range of system topologies and also includes key components to carry out specific functions required by these features. By utilizing ESF, we thoroughly investigate various aspects of CXL systems, including system topology, device-handled coherence, and the effects of PCIe characteristics, leading to important findings that can guide the creation of high-performance CXL systems. The ESF source codes are fully open-source and can be accessed at https://anonymous.4open.science/r/ESF-1CE3.

cs.AR↗

arXiv2024

Coexistence of superconductivity and sliding polar metal state in HgPSe3

The simultaneous presence of polarity and metallicity in a material signifies an exotic polar metal state, but such materials are extremely rare, especially in bulk form, due to mutually exclusive nature of the fundamental defining properties. Here, we report experimental findings that HgPSe3 is a robust bulk polar metal at room temperature with a chiral structure stabilized by pressure and, remarkably, this polar metal hosts superconductivity with critical temperature Tc up to 11 K. Theoretical analysis reveals a two-step interlayer sliding-then-compressing mechanism for coexistence of polarity and metallicity in HgPSe3. This work unveils a new paradigm for creating the bulk polar metal state and simultaneous presence of coexisting quantum orders, raising the prospect of discovering novel emergent physics using pressure as a tuning knob.

cond-mat.supr-con↗

arXiv2024

Improved bound on the number of edges of diameter-$k$-critical graphs

A graph is diameter-$k$-critical if its diameter equals $k$ and the deletion of any edge increases its diameter. The Murty-Simon Conjecture states that for any diameter-2-critical graph $G$ of order $n$, $e(G) \leq \lfloor \frac{n^2}{4}\rfloor$, with equality if and only if $G \cong K_{\lfloor \frac{n}{2}\rfloor,\lceil \frac{n}{2}\rceil}$. Füredi (JGT,1992) proved that this conjecture is true for sufficiently large $n$. Over two decades later, Loh and Ma (JCT-B, 2016) proved that $e(G) \leq \frac{n^2}{6}+o(n^2)$ for diameter-3-critical graphs $G$, and $e(G) \leq \frac{3n^2}{k}$ for diameter-$k$-critical graphs $G$ with $k \geq 4$. In this paper, we improve the bound for diameter-$k$-critical graphs to $ \frac{n^2}{2k}+o(n^2)$.

math.CO↗

arXiv2024

InstInfer: In-Storage Attention Offloading for Cost-Effective Long-Context LLM Inference

The widespread of Large Language Models (LLMs) marks a significant milestone in generative AI. Nevertheless, the increasing context length and batch size in offline LLM inference escalate the memory requirement of the key-value (KV) cache, which imposes a huge burden on the GPU VRAM, especially for resource-constraint scenarios (e.g., edge computing and personal devices). Several cost-effective solutions leverage host memory or SSDs to reduce storage costs for offline inference scenarios and improve the throughput. Nevertheless, they suffer from significant performance penalties imposed by intensive KV cache accesses due to limited PCIe bandwidth. To address these issues, we propose InstInfer, a novel LLM inference system that offloads the most performance-critical computation (i.e., attention in decoding phase) and data (i.e., KV cache) parts to Computational Storage Drives (CSDs), which minimize the enormous KV transfer overheads. InstInfer designs a dedicated flash-aware in-storage attention engine with KV cache management mechanisms to exploit the high internal bandwidths of CSDs instead of being limited by the PCIe bandwidth. The optimized P2P transmission between GPU and CSDs further reduces data migration overheads. Experimental results demonstrate that for a 13B model using an NVIDIA A6000 GPU, InstInfer improves throughput for long-sequence inference by up to 11.1$\times$, compared to existing SSD-based solutions such as FlexGen.

cs.AR↗

arXiv2024

Satellite monitoring of annual US landfill methane emissions and trends

We use satellite observations of atmospheric methane from the TROPOMI instrument to estimate total annual methane emissions for 2019-2023 from four large Southeast US landfills with gas collection and control systems. The emissions are on average 6$\times$ higher than the values reported by the landfills to the US Greenhouse Gas Reporting Program (GHGRP) which are used by the US Environmental Protection Agency (EPA) for its national Greenhouse Gas Inventory (GHGI). We find increasing emissions over the 2019-2023 period whereas the GHGRP reports a decrease. The GHGRP requires gas-collecting landfills to estimate their annual emissions either with a recovery-first model (estimating emissions as a function of methane recovered) or a generation-first model (estimating emissions from a first-order-decay applied to waste-in-place). All four landfills choose to use the recovery-first model, which yields emissions that are one-quarter of those from the generation-first model and decreasing over 2019-2023, in contrast with the TROPOMI observations. Our TROPOMI estimates for two of the landfills agree with the generation-first model, with increasing emissions over 2019-2023 due to increasing waste-in-place or decreasing methane recovery, and are still higher than the generation-first model for the other two landfills. Further examination of the GHGRP emissions from all reporting landfills in the US shows that the 19% decrease in landfill emissions reported by the GHGI over 2005-2022 reflects an increasing preference for the recovery-first model by the reporting landfills, rather than an actual emission decrease. The generation-first model would imply an increase in landfill emissions over 2013-2022, and this is more consistent with atmospheric observations.

physics.ao-ph↗

arXiv2024

Massive Dirac Fermions and Strong Shubnikov-de Haas Oscillations in Topological Insulator Sm,Fe:Bi2Se3 Single Crystals

Topological insulators (TIs) are emergent materials with unique band structure, which allow the study of quantum effect in solids, as well as contribute to high performance quantum devices. To achieve the better performance of TI, here we present a co-doping strategy using synergistic rare-earth Sm and transition-metal Fe dopants in Bi2Se3 single crystals, which combine the advantages of both transition metal doped TI (high ferromagnetic ordering temperature and observed QAHE), and rare-earth doped TI (large magnetic moments and significant spin orbit coupling). In the as-grown single crystals, clear evidences of ferromagnetic ordering were observed. The angle resolve photoemission spectroscopy indicate the ferromagnetism opens a 44 meV band gap at surface Dirac point. Moreover, the carrier mobility at 3 K is ~ 7400 cm2/Vs, and we thus observed an ultra-strong Shubnikov-de Haas oscillation in the longitudinal resistivity, as well as the Hall steps in transverse resistivity below 14 T. Our transport and angular resolved photoemission spectroscopy results suggest that the rare-earth and transition metal co-doping in Bi2Se3 system is a promising avenue implement the quantum anomalous Hall effect, as well as harnessing the massive Dirac fermion in electrical devices.

cond-mat.mtrl-sci↗

arXiv2024

Possible Excitonic Insulating Phase in Quantum-Confined Sb Nanoflakes

In the 1960s, it was proposed that in small indirect band-gap materials, excitons can spontaneously form because the density of carriers is too low to screen the attractive Coulomb interaction between electrons and holes. The result is a novel strongly interacting insulating phase known as an excitonic insulator. Here we employ scanning tunnelling microscopy (STM) and spectroscopy (STS) to show that the enhanced Coulomb interaction in quantum-confined elemental Sb nanoflakes drives the system to the excitonic insulator state. The unique feature of the excitonic insulator, a charge density wave (CDW) without periodic lattice distortion, is directly observed. Furthermore, STS shows a gap induced by the CDW near the Fermi surface. Our observations suggest that the Sb(110) nanoflake is an excitonic insulator.

cond-mat.mtrl-sci↗

arXiv2024

Characterization of Large Language Model Development in the Datacenter

Large Language Models (LLMs) have presented impressive performance across several transformative tasks. However, it is non-trivial to efficiently utilize large-scale cluster resources to develop LLMs, often riddled with numerous challenges such as frequent hardware failures, intricate parallelization strategies, and imbalanced resource utilization. In this paper, we present an in-depth characterization study of a six-month LLM development workload trace collected from our GPU datacenter Acme. Specifically, we investigate discrepancies between LLMs and prior task-specific Deep Learning (DL) workloads, explore resource utilization patterns, and identify the impact of various job failures. Our analysis summarizes hurdles we encountered and uncovers potential opportunities to optimize systems tailored for LLMs. Furthermore, we introduce our system efforts: (1) fault-tolerant pretraining, which enhances fault tolerance through LLM-involved failure diagnosis and automatic recovery. (2) decoupled scheduling for evaluation, which achieves timely performance feedback via trial decomposition and scheduling optimization.

cs.DC↗

arXiv2023

Approximation of Sums of Locally Dependent Random Variables via Perturbation of Stein Operator

Let $(X_{i}, i\in J)$ be a family of locally dependent nonnegative integer-valued random variables, and consider the sum $W=\sum\nolimits_{i\in J}X_i$. We first establish a general error upper bound for $d_{TV}(W, M)$ using Stein's method, where the target variable $M$ is either the mixture of Poisson distribution and binomial or negative binomial distribution. As applications, we attain $O(|J|^{-1})$ error bounds for ($k_{1},k_{2}$)-runs and $k$-runs under some special cases. Our results are significant improvements of the existing results in literature, say $O(|J|^{-0.5})$ in Peköz [Bernoulli, 19 (2013)] and $O(1)$ in Upadhye, et al. [Bernoulli, 23 (2017)].

math.PR↗

arXiv2023

Spin-Orbital Coupling in All-Inorganic Metal-Halide Perovskites: the Hidden Force that Matters

Highlighted with improved long-term thermal and environmental stability, all-inorganic metal halide perovskites exhibit tunable physical properties, cost-effective synthesis, and satisfactory optoelectronic performance, attracting increasing research interests worldwide. However, a less explored feature of these materials is their strong spin-orbit coupling (SOC), which is the hidden force influencing not only band structure but also properties including magnetoresistance, spin lifetime and singlet-triplet splitting. This review provides an overview of the fundamental aspects and the latest progress of the SOC and debate regarding Rashba effects in all-inorganic metal halide perovskites, providing critical insights into the physical phenomena and potential applications. Meanwhile, crystal structures and photophysics of all-inorganic perovskite are discussed in the context of SOC, along with the related experimental and characterization techniques. Furthermore, a recent understanding of the band topology in the all-inorganic halide perovskites is introduced to push the boundary even further for the novel applications of all-inorganic halide perovskites. Finally, an outlook is given on the potential directions of breakthroughs via leveraging the SOC in halide perovskites.

cond-mat.mtrl-sci↗

arXiv2023

Automated Learning for Deformable Medical Image Registration by Jointly Optimizing Network Architectures and Objective Functions

Deformable image registration plays a critical role in various tasks of medical image analysis. A successful registration algorithm, either derived from conventional energy optimization or deep networks requires tremendous efforts from computer experts to well design registration energy or to carefully tune network architectures for the specific type of medical data. To tackle the aforementioned problems, this paper proposes an automated learning registration algorithm (AutoReg) that cooperatively optimizes both architectures and their corresponding training objectives, enabling non-computer experts, e.g., medical/clinical users, to conveniently find off-the-shelf registration algorithms for diverse scenarios. Specifically, we establish a triple-level framework to deduce registration network architectures and objectives with an auto-searching mechanism and cooperating optimization. We conduct image registration experiments on multi-site volume datasets and various registration tasks. Extensive results demonstrate that our AutoReg may automatically learn an optimal deep registration network for given volumes and achieve state-of-the-art performance, also significantly improving computation efficiency than the mainstream UNet architectures (from 0.558 to 0.270 seconds for a 3D image pair on the same configuration).

cs.CV↗

arXiv2023

Topological Insulator VxBi1.08-xSn0.02Sb0.9Te2S as a Promising n-type Thermoelectric Material

As one of the most important n-type thermoelectric (TE) materials, Bi2Te3 has been studied for decades, with efforts to enhance the thermoelectric performance based on element doping, band engineering, etc. In this study, we report a novel bulk-insulating topological material system as a replacement for n-type Bi2Te3 materials: V doped Bi1.08Sn0.02Sb0.9Te2S (V:BSSTS) . The V:BSSTS is a bulk insulator with robust metallic topological surface states. Furthermore, the bulk band gap can be tuned by the doping level of V, which is verified by magnetotransport measurements. Large linear magnetoresistance is observed in all samples. Excellent thermoelectric performance is obtained in the V:BSSTS samples, e.g., the highest figure of merit ZT of ~ 0.8 is achieved in the 2% V doped sample (denoted as V0.02) at 550 K. The high thermoelectric performance of V:BSSTS can be attributed to two synergistic effects: (1) the low conductive secondary phases Sb2S3, and V2S3 are believed to be important scattering centers for phonons, leading to lower lattice thermal conductivity; and (2) the electrical conductivity is increased due to the high-mobility topological surface states at the boundaries. In addition, by replacing one third of costly tellurium with abundant, low-cost, and less-toxic sulfur element, the newly produced BSSTS material is inexpensive but still has comparable TE performance to the traditional Bi2Te3-based materials, which offers a cheaper plan for the electronics and thermoelectric industries. Our results demonstrate that topological materials with unique band structures can provide a new platform in the search for new high performance TE materials.

cond-mat.mtrl-sci↗

arXiv2023

Colossal magnetoresistance in Ti lightly-doped Cr2Se3 single crystals with layered structure

Stoichiometric Cr2Se3 single crystals are particular layer-structured antiferromagnets which possess noncolinear spin configuration, weak ferromagnetic moments, moderate magnetoresistance (MR ~ 14.3%), and bad metallic conductivity below the antiferromagnetic phase transition temperature. Here, we report an interesting >16000% colossal magnetoresistance (CMR) effect in Ti (1.5 atomic percent) lightly-doped Cr2Se3 single crystals. Such a CMR is approximately 1143 times larger than that of the stoichiometric Cr2Se3 crystals and is rarely observed in layered antiferromagnets and is attributed to the frustrated spin configuration. Moreover, the Ti doping not only dramatically changes the electronic conductivity of the Cr2Se3 crystal from a bad metal to a semiconductor with a gap of ~ 15 meV, but also induces a change of the magnetic anisotropy of the Cr2Se3 crystal from strong out-of-plane to weak in plane. Further, magnetotransport measurements reveal that the low-field MR scales with the square of the reduced magnetization, which is a signature of CMR materials. The layered Ti:Cr2Se3 with CMR effect could be used as 2D heterostructure building blocks to provide colossal negative MR in spintronic devices.

cond-mat.mtrl-sci↗