arXiv subjects

Tommaso Melodia

Publications and source records attributed to Tommaso Melodia.

At least 127 records · Page 7Linked to original sources

arXiv2022

OpenRAN Gym: An Open Toolbox for Data Collection and Experimentation with AI in O-RAN

Open Radio Access Network (RAN) architectures will enable interoperability, openness, and programmatic data-driven control in next generation cellular networks. However, developing scalable and efficient data-driven algorithms that can generalize across diverse deployments and optimize RAN performance is a complex feat, largely unaddressed as of today. Specifically, the ability to design efficient data-driven algorithms for network control and inference requires at a minimum (i) access to large, rich, and heterogeneous datasets; (ii) testing at scale in controlled but realistic environments, and (iii) software pipelines to automate data collection and experimentation. To facilitate these tasks, in this paper we propose OpenRAN Gym, a practical, open, experimental toolbox that provides end-to-end design, data collection, and testing workflows for intelligent control in next generation Open RAN systems. OpenRAN Gym builds on software frameworks for the collection of large datasets and RAN control, and on a lightweight O-RAN environment for experimental wireless platforms. We first provide an overview of OpenRAN Gym and then describe how it can be used to collect data, to design and train artificial intelligence and machine learning-based O-RAN applications (xApps), and to test xApps on a softwarized RAN. Then, we provide an example of two xApps designed with OpenRAN Gym and used to control a large-scale network with 7 base stations and 42 users deployed on the Colosseum testbed. OpenRAN Gym and its software components are open source and publicly-available to the research community.

cs.NI↗

arXiv2022

ChARM: NextG Spectrum Sharing Through Data-Driven Real-Time O-RAN Dynamic Control

Today's radio access networks (RANs) are monolithic entities which often operate statically on a given set of parameters for the entirety of their operations. To implement realistic and effective spectrum sharing policies, RANs will need to seamlessly and intelligently change their operational parameters. In stark contrast with existing paradigms, the new O-RAN architectures for 5G-and-beyond networks (NextG) separate the logic that controls the RAN from its hardware substrate, allowing unprecedented real-time fine-grained control of RAN components. In this context, we propose the Channel-Aware Reactive Mechanism (ChARM), a data-driven O-RAN-compliant framework that allows (i) sensing the spectrum to infer the presence of interference and (ii) reacting in real time by switching the distributed unit (DU) and radio unit (RU) operational parameters according to a specified spectrum access policy. ChARM is based on neural networks operating directly on unprocessed I/Q waveforms to determine the current spectrum context. ChARM does not require any modification to the existing 3GPP standards. It is designed to operate within the O-RAN specifications, and can be used in conjunction with other spectrum sharing mechanisms (e.g., LTE-U, LTE-LAA or MulteFire). We demonstrate the performance of ChARM in the context of spectrum sharing among LTE and Wi-Fi in unlicensed bands, where a controller operating over a RAN Intelligent Controller (RIC) senses the spectrum and switches cell frequency to avoid Wi-Fi. We develop a prototype of ChARM using srsRAN, and leverage the Colosseum channel emulator to collect a large-scale waveform dataset to train our neural networks with. Experimental results show that ChARM achieves accuracy of up to 96% on Colosseum and 85% on an over-the-air testbed, demonstrating the capacity of ChARM to exploit the considered spectrum channels.

cs.NI↗

arXiv2022

OrchestRAN: Network Automation through Orchestrated Intelligence in the Open RAN

The next generation of cellular networks will be characterized by softwarized, open, and disaggregated architectures exposing analytics and control knobs to enable network intelligence. How to realize this vision, however, is largely an open problem. In this paper, we take a decisive step forward by presenting and prototyping OrchestRAN, a novel orchestration framework that embraces and builds upon the Open RAN paradigm to provide a practical solution to these challenges. OrchestRAN has been designed to execute in the non-real-time RAN Intelligent Controller (RIC) and allows Network Operators (NOs) to specify high-level control/inference objectives (i.e., adapt scheduling, and forecast capacity in near-real-time for a set of base stations in Downtown New York). OrchestRAN automatically computes the optimal set of data-driven algorithms and their execution location to achieve intents specified by the NOs while meeting the desired timing requirements. We show that the problem of orchestrating intelligence in Open RAN is NP-hard, and design low-complexity solutions to support real-world applications. We prototype OrchestRAN and test it at scale on Colosseum. Our experimental results on a network with 7 base stations and 42 users demonstrate that OrchestRAN is able to instantiate data-driven services on demand with minimal control overhead and latency.

cs.NI↗

arXiv2022

ColO-RAN: Developing Machine Learning-based xApps for Open RAN Closed-loop Control on Programmable Experimental Platforms

In spite of the new opportunities brought about by the Open RAN, advances in ML-based network automation have been slow, mainly because of the unavailability of large-scale datasets and experimental testing infrastructure. This slows down the development and widespread adoption of Deep Reinforcement Learning (DRL) agents on real networks, delaying progress in intelligent and autonomous RAN control. In this paper, we address these challenges by proposing practical solutions and software pipelines for the design, training, testing, and experimental evaluation of DRL-based closed-loop control in the Open RAN. We introduce ColO-RAN, the first publicly-available large-scale O-RAN testing framework with software-defined radios-in-the-loop. Building on the scale and computational capabilities of the Colosseum wireless network emulator, ColO-RAN enables ML research at scale using O-RAN components, programmable base stations, and a "wireless data factory". Specifically, we design and develop three exemplary xApps for DRL-based control of RAN slicing, scheduling and online model training, and evaluate their performance on a cellular network with 7 softwarized base stations and 42 users. Finally, we showcase the portability of ColO-RAN to different platforms by deploying it on Arena, an indoor programmable testbed. Extensive results from our first-of-its-kind large-scale evaluation highlight the benefits and challenges of DRL-based adaptive control. They also provide insights on the development of wireless DRL pipelines, from data analysis to the design of DRL agents, and on the tradeoffs associated to training on a live RAN. ColO-RAN and the collected large-scale dataset will be made publicly available to the research community.

cs.NI↗

arXiv2021

Colosseum: Large-Scale Wireless Experimentation Through Hardware-in-the-Loop Network Emulation

Colosseum is an open-access and publicly-available large-scale wireless testbed for experimental research via virtualized and softwarized waveforms and protocol stacks on a fully programmable, "white-box" platform. Through 256 state-of-the-art software-defined radios and a massive channel emulator core, Colosseum can model virtually any scenario, enabling the design, development and testing of solutions at scale in a variety of deployments and channel conditions. These Colosseum radio-frequency scenarios are reproduced through high-fidelity FPGA-based emulation with finite-impulse response filters. Filters model the taps of desired wireless channels and apply them to the signals generated by the radio nodes, faithfully mimicking the conditions of real-world wireless environments. In this paper, we introduce Colosseum as a testbed that is for the first time open to the research community. We describe the architecture of Colosseum and its experimentation and emulation capabilities. We then demonstrate the effectiveness of Colosseum for experimental research at scale through exemplary use cases including prevailing wireless technologies (e.g., cellular and Wi-Fi) in spectrum sharing and unmanned aerial vehicle scenarios. A roadmap for Colosseum future updates concludes the paper.

cs.NI↗

arXiv2021

Streaming from the Air: Enabling Drone-sourced Video Streaming Applications on 5G Open-RAN Architectures

Enabling high data-rate uplink cellular connectivity for drones is a challenging problem, since a flying drone has a higher likelihood of having line-of-sight propagation to base stations that terrestrial UEs normally do not have line-of-sight to. This may result in uplink inter-cell interference and uplink performance degradation for the neighboring ground UEs when drones transmit at high data-rates (e.g., video streaming). We address this problem from a cellular operator's standpoint to support drone-sourced video streaming of a point of interest. We propose a low-complexity, closed-loop control system for Open-RAN architectures that jointly optimizes the drone's location in space and its transmission directionality to support video streaming and minimize its uplink interference impact on the network. We prototype and experimentally evaluate the proposed control system on a dedicated outdoor multi-cell RAN testbed, which is the first measurement campaign of its kind. Furthermore, we perform a large-scale simulation assessment of the proposed control system using the actual cell deployment topologies and cell load profiles of a major US cellular carrier. The proposed Open-RAN control scheme achieves an average 19% network capacity gain over traditional BS-constrained control solutions and satisfies the application data-rate requirements of the drone (e.g., to stream an HD video).

cs.NI↗

arXiv2021

What is A Wireless UAV? A Design Blueprint for 6G Flying Wireless Nodes

Wireless Unmanned Aerial Vehicles (UAVs) were introduced in the world of 4th generation networks (4G) as cellular users, and have attracted the interest of the wireless community ever since. In~5G, UAVs operate also as flying Base Stations providing service to ground users. They can also implement independent off-the-grid UAV networks. In~6G networks, wireless UAVs will connect ground users to in-orbit wireless infrastructure. As the design and prototyping of wireless UAVs are on the rise, the time is ripe for introducing a more precise definition of what is a wireless UAV. In doing so, we revise the major design challenges in the prototyping of wireless UAVs for future 6G spectrum research. We then introduce a new wireless UAV prototype that addresses these challenges. The design of our wireless UAV prototype will be made public and freely available to other researchers.

cs.NI↗

arXiv2021

Redefining Wireless Communication for 6G: Signal Processing Meets Deep Learning with Deep Unfolding

The year 2019 witnessed the rollout of the 5G standard, which promises to offer significant data rate improvement over 4G. While 5G is still in its infancy, there has been an increased shift in the research community for communication technologies beyond 5G. The recent emergence of machine learning approaches for enhancing wireless communications and empowering them with much-desired intelligence holds immense potential for redefining wireless communication for 6G. The evolving communication systems will be bottlenecked in terms of latency, throughput, and reliability by the underlying signal processing at the physical layer. In this position paper, we motivate the need to redesign iterative signal processing algorithms by leveraging deep unfolding techniques to fulfill the physical layer requirements for 6G networks. To this end, we begin by presenting the service requirements and the key challenges posed by the envisioned 6G communication architecture. We outline the deficiencies of the traditional algorithmic principles and data-hungry deep learning (DL) approaches in the context of 6G networks. Specifically, deep unfolded signal processing is presented by sketching the interplay between domain knowledge and DL. The deep unfolded approaches reviewed in this article are positioned explicitly in the context of the requirements imposed by the next generation of cellular networks. Finally, this article motivates open research challenges to truly realize hardware-efficient edge intelligence for future 6G networks.

cs.NI↗

arXiv2021

Intelligence and Learning in O-RAN for Data-driven NextG Cellular Networks

Next Generation (NextG) cellular networks will be natively cloud-based and built upon programmable, virtualized, and disaggregated architectures. The separation of control functions from the hardware fabric and the introduction of standardized control interfaces will enable the definition of custom closed-control loops, which will ultimately enable embedded intelligence and real-time analytics, thus effectively realizing the vision of autonomous and self-optimizing networks. This article explores the disaggregated network architecture proposed by the O-RAN Alliance as a key enabler of NextG networks. Within this architectural context, we discuss the potential, the challenges, and the limitations of data-driven optimization approaches to network control over different timescales. We also present the first large-scale integration of O-RAN-compliant software components with an open-source full-stack softwarized cellular network. Experiments conducted on Colosseum, the world's largest wireless network emulator, demonstrate closed-loop integration of real-time analytics and control through deep reinforcement learning agents. We also show the feasibility of Radio Access Network (RAN) control through xApps running on the near real-time RAN Intelligent Controller, to optimize the scheduling policies of co-existing network slices, leveraging the O-RAN open interfaces to collect data at the edge of the network.

cs.NI↗

arXiv2021

DeepBeam: Deep Waveform Learning for Coordination-Free Beam Management in mmWave Networks

Highly directional millimeter wave (mmWave) radios need to perform beam management to establish and maintain reliable links. To do so, existing solutions mostly rely on explicit coordination between the transmitter (TX) and the receiver (RX), which significantly reduces the airtime available for communication and further complicates the network protocol design. This paper advances the state of the art by presenting DeepBeam, a framework for beam management that does not require pilot sequences from the TX, nor any beam sweeping or synchronization from the RX. This is achieved by inferring (i) the Angle of Arrival (AoA) of the beam and (ii) the actual beam being used by the transmitter through waveform-level deep learning on ongoing transmissions between the TX to other receivers. In this way, the RX can associate Signal-to-Noise-Ratio (SNR) levels to beams without explicit coordination with the TX. This is possible because different beam patterns introduce different impairments to the waveform, which can be subsequently learned by a convolutional neural network (CNN). We conduct an extensive experimental data collection campaign where we collect more than 4 TB of mmWave waveforms with (i) 4 phased array antennas at 60.48 GHz, (ii) 2 codebooks containing 24 one-dimensional beams and 12 two-dimensional beams; (iii) 3 receiver gains; (iv) 3 different AoAs; (v) multiple TX and RX locations. Moreover, we collect waveform data with two custom-designed mmWave software-defined radios with fully-digital beamforming architectures at 58 GHz. Results show that DeepBeam (i) achieves accuracy of up to 96%, 84% and 77% with a 5-beam, 12-beam and 24-beam codebook, respectively; (ii) reduces latency by up to 7x with respect to the 5G NR initial beam sweep in a default configuration and with a 12-beam codebook. The waveform dataset and the full DeepBeam code repository are publicly available.

cs.NI↗

arXiv2021

Can You Fix My Neural Network? Real-Time Adaptive Waveform Synthesis for Resilient Wireless Signal Classification

Thanks to its capability of classifying complex phenomena without explicit modeling, deep learning (DL) has been demonstrated to be a key enabler of Wireless Signal Classification (WSC). Although DL can achieve a very high accuracy under certain conditions, recent research has unveiled that the wireless channel can disrupt the features learned by the DL model during training, thus drastically reducing the classification performance in real-world live settings. Since retraining classifiers is cumbersome after deployment, existing work has leveraged the usage of carefully-tailored Finite Impulse Response (FIR) filters that, when applied at the transmitter's side, can restore the features that are lost because of the the channel actions, i.e., waveform synthesis. However, these approaches compute FIRs using offline optimization strategies, which limits their efficacy in highly-dynamic channel settings. In this paper, we improve the state of the art by proposing Chares, a Deep Reinforcement Learning (DRL)-based framework for channel-resilient adaptive waveform synthesis. Chares adapts to new and unseen channel conditions by optimally computing through DRL the FIRs in real-time. Chares is a DRL agent whose architecture is-based upon the Twin Delayed Deep Deterministic Policy Gradients (TD3), which requires minimal feedback from the receiver and explores a continuous action space. Chares has been extensively evaluated on two well-known datasets. We have also evaluated the real-time latency of Chares with an implementation on field-programmable gate array (FPGA). Results show that Chares increases the accuracy up to 4.1x when no waveform synthesis is performed, by 1.9x with respect to existing work, and can compute new actions within 41us.

cs.NI↗

arXiv2021

WNOS: Enabling Principled Software-Defined Wireless Networking

This article investigates the basic design principles for a new Wireless Network Operating System (WNOS), a radically different approach to software-defined networking (SDN) for infrastructure-less wireless networks. Departing from well-understood approaches inspired by OpenFlow, WNOS provides the network designer with an abstraction hiding (i) the lower-level details of the wireless protocol stack and (ii) the distributed nature of the network operations. Based on this abstract representation, the WNOS takes network control programs written on a centralized, high-level view of the network and automatically generates distributed cross-layer control programs based on distributed optimization theory that are executed by each individual node on an abstract representation of the radio hardware. We first discuss the main architectural principles of WNOS. Then, we discuss a new approach to automatically generate solution algorithms for each of the resulting subproblems in an automated fashion. Finally, we illustrate a prototype implementation of WNOS on software-defined radio devices and test its effectiveness by considering specific cross-layer control problems. Experimental results indicate that, based on the automatically generated distributed control programs, WNOS achieves 18%, 56% and 80.4% utility gain in networks with low, medium and high levels of interference; maybe more importantly, we illustrate how the global network behavior can be controlled by modifying a few lines of code on a centralized abstraction.

cs.NI↗

arXiv2021

CellOS: Zero-touch Softwarized Open Cellular Networks

Current cellular networks rely on closed and inflexible infrastructure tightly controlled by a handful of vendors. Their configuration requires vendor support and lengthy manual operations, which prevent Telco Operators (TOs) from unlocking the full network potential and from performing fine grained performance optimization, especially on a per-user basis. To address these key issues, this paper introduces CellOS, a fully automated optimization and management framework for cellular networks that requires negligible intervention ("zero-touch"). CellOS leverages softwarization and automatic optimization principles to bridge Software-Defined Networking (SDN) and cross-layer optimization. Unlike state-of-the-art SDN-inspired solutions for cellular networking, CellOS: (i) Hides low-level network details through a general virtual network abstraction; (ii) allows TOs to define high-level control objectives to dictate the desired network behavior without requiring knowledge of optimization techniques, and (iii) automatically generates and executes distributed control programs for simultaneous optimization of heterogeneous control objectives on multiple network slices. CellOS has been implemented and evaluated on an indoor testbed with two different LTE-compliant implementations: OpenAirInterface and srsLTE. We further demonstrated CellOS capabilities on the long-range outdoor POWDER-RENEW PAWR 5G platform. Results from scenarios with multiple base stations and users show that CellOS is platform-independent and self-adapts to diverse network deployments. Our investigation shows that CellOS outperforms existing solutions on key metrics, including throughput (up to 86% improvement), energy efficiency (up to 84%) and fairness (up to 29%).

cs.NI↗

arXiv2021

Open, Programmable, and Virtualized 5G Networks: State-of-the-Art and the Road Ahead

Fifth generation (5G) cellular networks will serve a wide variety of heterogeneous use cases, including mobile broadband users, ultra-low latency services and massively dense connectivity scenarios. The resulting diverse communication requirements will demand networking with unprecedented flexibility, not currently provided by the monolithic black-box approach of 4G cellular networks. The research community and an increasing number of standardization bodies and industry coalitions have recognized softwarization, virtualization, and disaggregation of networking functionalities as the key enablers of the needed shift to flexibility. Particularly, software-defined cellular networks are heralded as the prime technology to satisfy the new application-driven traffic requirements and to support the highly time-varying topology and interference dynamics, because of their openness through well-defined interfaces, and programmability, for swift and responsive network optimization. Leading the technological innovation in this direction, several 5G software-based projects and alliances have embraced the open source approach, making new libraries and frameworks available to the wireless community. This race to open source softwarization, however, has led to a deluge of solutions whose interoperability and interactions are often unclear. This article provides the first cohesive and exhaustive compendium of recent open source software and frameworks for 5G cellular networks, with a full stack and end-to-end perspective. We detail their capabilities and functionalities focusing on how their constituting elements fit the 5G ecosystem, and unravel the interactions among the surveyed solutions. Finally, we review hardware and testbeds on which these frameworks can run, and discuss the limitations of the state-of-the-art, as well as feasible directions toward fully open source, programmable 5G networks.

cs.NI↗

arXiv2021

SteaLTE: Private 5G Cellular Connectivity as a Service with Full-stack Wireless Steganography

Fifth-generation (5G) systems will extensively employ radio access network (RAN) softwarization. This key innovation enables the instantiation of "virtual cellular networks" running on different slices of the shared physical infrastructure. In this paper, we propose the concept of Private Cellular Connectivity as a Service (PCCaaS), where infrastructure providers deploy covert network slices known only to a subset of users. We then present SteaLTE as the first realization of a PCCaaS-enabling system for cellular networks. At its core, SteaLTE utilizes wireless steganography to disguise data as noise to adversarial receivers. Differently from previous work, however, it takes a full-stack approach to steganography, contributing an LTE-compliant steganographic protocol stack for PCCaaS-based communications, and packet schedulers and operations to embed covert data streams on top of traditional cellular traffic (primary traffic). SteaLTE balances undetectability and performance by mimicking channel impairments so that covert data waveforms are almost indistinguishable from noise. We evaluate the performance of SteaLTE on an indoor LTE-compliant testbed under different traffic profiles, distance and mobility patterns. We further test it on the outdoor PAWR POWDER platform over long-range cellular links. Results show that in most experiments SteaLTE imposes little loss of primary traffic throughput in presence of covert data transmissions (< 6%), making it suitable for undetectable PCCaaS networking.

cs.NI↗

arXiv2021

What is a Blockchain? A Definition to Clarify the Role of the Blockchain in the Internet of Things

The use of the term blockchain is documented for disparate projects, from cryptocurrencies to applications for the Internet of Things (IoT), and many more. The concept of blockchain appears therefore blurred, as it is hard to believe that the same technology can empower applications that have extremely different requirements and exhibit dissimilar performance and security. This position paper elaborates on the theory of distributed systems to advance a clear definition of blockchain that allows us to clarify its role in the IoT. This definition inextricably binds together three elements that, as a whole, provide the blockchain with those unique features that distinguish it from other distributed ledger technologies: immutability, transparency and anonimity. We note however that immutability comes at the expense of remarkable resource consumption, transparency demands no confidentiality and anonymity prevents user identification and registration. This is in stark contrast to the requirements of most IoT applications that are made up of resource constrained devices, whose data need to be kept confidential and users to be clearly known. Building on the proposed definition, we derive new guidelines for selecting the proper distributed ledger technology depending on application requirements and trust models, identifying common pitfalls leading to improper applications of the blockchain. We finally indicate a feasible role of the blockchain for the IoT: myriads of local, IoT transactions can be aggregated off-chain and then be successfully recorded on an external blockchain as a means of public accountability when required.

cs.CR↗

arXiv2021

Toward End-to-End, Full-Stack 6G Terahertz Networks

Recent evolutions in semiconductors have brought the terahertz band in the spotlight as an enabler for terabit-per-second communications in 6G networks. Most of the research so far, however, has focused on understanding the physics of terahertz devices, circuitry and propagation, and on studying physical layer solutions. However, integrating this technology in complex mobile networks requires a proper design of the full communication stack, to address link- and system-level challenges related to network setup, management, coordination, energy efficiency, and end-to-end connectivity. This paper provides an overview of the issues that need to be overcome to introduce the terahertz spectrum in mobile networks, from a MAC, network and transport layer perspective, with considerations on the performance of end-to-end data flows on terahertz connections.

cs.NI↗

arXiv2020

Deep Learning at the Physical Layer: System Challenges and Applications to 5G and Beyond

The unprecedented requirements of the Internet of Things (IoT) have made fine-grained optimization of spectrum resources an urgent necessity. Thus, designing techniques able to extract knowledge from the spectrum in real time and select the optimal spectrum access strategy accordingly has become more important than ever. Moreover, 5G and beyond (5GB) networks will require complex management schemes to deal with problems such as adaptive beam management and rate selection. Although deep learning (DL) has been successful in modeling complex phenomena, commercially-available wireless devices are still very far from actually adopting learning-based techniques to optimize their spectrum usage. In this paper, we first discuss the need for real-time DL at the physical layer, and then summarize the current state of the art and existing limitations. We conclude the paper by discussing an agenda of research challenges and how DL can be applied to address crucial problems in 5GB networks.

cs.NI↗