arXiv subjects

Tommaso Melodia

Publications and source records attributed to Tommaso Melodia.

At least 109 records · Page 6Linked to original sources

arXiv2023

NeutRAN: An Open RAN Neutral Host Architecture for Zero-Touch RAN and Spectrum Sharing

Obtaining access to exclusive spectrum, cell sites, Radio Access Network (RAN) equipment, and edge infrastructure imposes major capital expenses to mobile network operators. A neutral host infrastructure, by which a third-party company provides RAN services to mobile operators through network virtualization and slicing techniques, is seen as a promising solution to decrease these costs. Currently, however, neutral host providers lack automated and virtualized pipelines for onboarding new tenants and to provide elastic and on-demand allocation of resources matching operators' requirements. To address this gap, this paper presents NeutRAN, a zero-touch framework based on the O-RAN architecture to support applications on neutral hosts and automatic operator onboarding. NeutRAN builds upon two key components: (i) an optimization engine to guarantee coverage and to meet quality of service requirements while accounting for the limited amount of shared spectrum and RAN nodes, and (ii) a fully virtualized and automated infrastructure that converts the output of the optimization engine into deployable micro-services to be executed at RAN nodes and cell sites. NeutRAN was prototyped on an OpenShift cluster and on a programmable testbed with 4 base stations and 10 users from 3 different tenants. We evaluate its benefits, comparing it to a traditional license-based RAN where each tenant has dedicated physical and spectrum resources. We show that NeutRAN can deploy a fully operational neutral host-based cellular network in around 10 seconds. Experimental results show that it increases the cumulative network throughput by 2.18x and the per-user average throughput by 1.73x in networks with shared spectrum blocks of 30 MHz. NeutRAN provides a 1.77x cumulative throughput gain even when it can only operate on a shared spectrum block of 10 MHz (one third of the spectrum used in license-based RANs).

cs.NI↗

arXiv2023

Modeling Interference for the Coexistence of 6G Networks and Passive Sensing Systems

Future wireless networks and sensing systems will benefit from access to large chunks of spectrum above 100 GHz, to achieve terabit-per-second data rates in 6th Generation (6G) cellular systems and improve accuracy and reach of Earth exploration and sensing and radio astronomy applications. These are extremely sensitive to interference from artificial signals, thus the spectrum above 100 GHz features several bands which are protected from active transmissions under current spectrum regulations. To provide more agile access to the spectrum for both services, active and passive users will have to coexist without harming passive sensing operations. In this paper, we provide the first, fundamental analysis of Radio Frequency Interference (RFI) that large-scale terrestrial deployments introduce in different satellite sensing systems now orbiting the Earth. We develop a geometry-based analysis and extend it into a data-driven model which accounts for realistic propagation, building obstruction, ground reflection, for network topology with up to $10^5$ nodes in more than $85$ km$^2$. We show that the presence of harmful RFI depends on several factors, including network load, density and topology, satellite orientation, and building density. The results and methodology provide the foundation for the development of coexistence solutions and spectrum policy towards 6G.

eess.SP↗

arXiv2023

Coexistence and Spectrum Sharing Above 100 GHz

[...] This paper explores how spectrum policy and spectrum technologies can evolve to enable sharing among different stakeholders in the above 100 GHz spectrum, without introducing harmful interference or disrupting either security applications or fundamental science exploration. This portion of the spectrum presents new opportunities to design spectrum sharing schemes, based on novel antenna designs, directional ultra-high-rate communications, and active/passive user coordination. The paper provides a tutorial on current regulations above 100 GHz, and highlights how sharing is central to allowing each stakeholder to make the most out of this spectrum. It then defines - through detailed simulations based on standard International Telecommunications Union (ITU) channel and antenna models - scenarios in which active users may introduce harmful interference to passive sensing. Based on this evaluation, it reviews a number of promising techniques that can enable active/passive sharing above 100 GHz. The critical review and tutorial on policy and technologies of this paper have the potential to kickstart future research and regulations that promote safe coexistence between active and passive users above 100 GHz, further benefiting the development of digital technologies and scientific exploration.

cs.NI↗

arXiv2023

ns-O-RAN: Simulating O-RAN 5G Systems in ns-3

O-RAN is radically shifting how cellular networks are designed, deployed and optimized through network programmability, disaggregation, and virtualization. Specifically, RAN Intelligent Controllers (RICs) can orchestrate and optimize the Radio Access Network (RAN) operations, allowing fine-grained control over the network. RICs provide new approaches and solutions for classical use cases such as on-demand traffic steering, anomaly detection, and Quality of Service (QoS) management, with an optimization that can target single User Equipments (UEs), slices, cells, or entire base stations. While this comes with the potential to enable intelligent, programmable RANs, there are still significant challenges to be faced, primarily related to data collection at scale, development and testing of custom control logic for the RICs, and availability of Open RAN simulation and experimental tools for the research and development communities. To address this, we introduce ns-O-RAN, a software integration between a real-world near-real-time RIC and an ns-3 simulated RAN which provides a platform for researchers and telco operators to build, test and integrate xApps. ns-O-RAN extends a popular Open RAN experimental framework (OpenRAN Gym) with simulation capabilities that enable the generation of realistic datasets without the need for experimental infrastructure. We implement it as a new open-source ns-3 module that uses the E2 interface to connect different simulated 5G base stations with the RIC, enabling the exchange of E2 messages and RAN KPMs to be consumed by standard xApps. Furthermore, we test ns-O-RAN with the OSC and OpenRAN Gym RICs, simplifying the onboarding from a test environment to production with real telecom hardware controlled without major reconfigurations required. ns-O-RAN is open source and publicly available, together with quick-start tutorials and documentation.

cs.NI↗

arXiv2023

Toward Open Integrated Access and Backhaul with O-RAN

Millimeter wave (mmWave) communications has been recently standardized for use in the fifth generation (5G) of cellular networks, fulfilling the promise of multi-gigabit mobile throughput of current and future mobile radio network generations. In this context, the network densification required to overcome the difficult mmWave propagation will result in increased deployment costs. Integrated Access and Backhaul (IAB) has been proposed as an effective mean of reducing densification costs by deploying a wireless mesh network of base stations, where backhaul and access transmissions share the same radio technology. However, IAB requires sophisticated control mechanisms to operate efficiently and address the increased complexity. The Open Radio Access Network (RAN) paradigm represents the ideal enabler of RAN intelligent control, but its current specifications are not compatible with IAB. In this work, we discuss the challenges of integrating IAB into the Open RAN ecosystem, detailing the required architectural extensions that will enable dynamic control of 5G IAB networks. We implement the proposed integrated architecture into the first publicly-available Open-RAN-enabled experimental framework, which allows prototyping and testing Open-RAN-based solutions over end-to-end 5G IAB networks. Finally, we validate the framework with both ideal and realistic deployment scenarios exploiting the large-scale testing capabilities of publicly available experimental platforms

cs.NI↗

arXiv2023

SignCRF: Scalable Channel-agnostic Data-driven Radio Authentication System

Radio Frequency Fingerprinting through Deep Learning (RFFDL) is a data-driven IoT authentication technique that leverages the unique hardware-level manufacturing imperfections associated with a particular device to recognize (fingerprint) the device based on variations introduced in the transmitted waveform. The proposed SignCRF is a scalable, channel-agnostic, data-driven radio authentication platform with unmatched precision in fingerprinting wireless devices based on their unique manufacturing impairments and independent of the dynamic channel irregularities caused by mobility. SignCRF consists of (i) a baseline classifier finely trained to authenticate devices with high accuracy and at scale; (ii) an environment translator carefully designed and trained to remove the dynamic channel impact from RF signals while maintaining the radio's specific signature; (iii) a Max-Rule module that selects the highest precision authentication technique between the baseline classifier and the environment translator per radio. We design, train, and validate the performance of SignCRF for multiple technologies in dynamic environments and at scale (100 LoRa and 20 WiFi devices). We demonstrate that SignCRF significantly improves the RFFDL performance by achieving as high as 5x and 8x improvement in correct authentication of WiFi and LoRa devices when compared to the state-of-the-art, respectively.

cs.CR↗

arXiv2023

Narrowband Interference Detection via Deep Learning

Due to the increased usage of spectrum caused by the exponential growth of wireless devices, detecting and avoiding interference has become an increasingly relevant problem to ensure uninterrupted wireless communications. In this paper, we focus our interest on detecting narrowband interference caused by signals that despite occupying a small portion of the spectrum only can cause significant harm to wireless systems, for example, in the case of interference with pilots and other signals that are used to equalize the effect of the channel or attain synchronization. Due to the small sizes of these signals, detection can be difficult due to their low energy footprint, while greatly impacting (or denying completely in some cases) network communications. We present a novel narrowband interference detection solution that utilizes convolutional neural networks (CNNs) to detect and locate these signals with high accuracy. To demonstrate the effectiveness of our solution, we have built a prototype that has been tested and validated on a real-world over-the-air large-scale wireless testbed. Our experimental results show that our solution is capable of detecting narrowband jamming attacks with an accuracy of up to 99%. Moreover, it is also able to detect multiple attacks affecting several frequencies at the same time even in the case of previously unseen attack patterns. Not only can our solution achieve a detection accuracy between 92% and 99%, but it does so by only adding an inference latency of 0.093ms.

cs.NI↗

arXiv2023

ESWORD: Implementation of Wireless Jamming Attacks in a Real-World Emulated Network

Wireless jamming attacks have plagued wireless communication systems and will continue to do so going forward with technological advances. These attacks fall under the category of Electronic Warfare (EW), a continuously growing area in both attack and defense of the electromagnetic spectrum, with one subcategory being electronic attacks. Jamming attacks fall under this specific subcategory of EW as they comprise adversarial signals that attempt to disrupt, deny, degrade, destroy, or deceive legitimate signals in the electromagnetic spectrum. While jamming is not going away, recent research advances have started to get the upper hand against these attacks by leveraging new methods and techniques, such as machine learning. However, testing such jamming solutions on a wide and realistic scale is a daunting task due to strict regulations on spectrum emissions. In this paper, we introduce eSWORD, the first large-scale framework that allows users to safely conduct real-time and controlled jamming experiments with hardware-in-the-loop. This is done by integrating eSWORD into the Colosseum wireless network emulator that enables large-scale experiments with up to 50 software-defined radio nodes. We compare the performance of eSWORD with that of real-world jamming systems by using an over-the-air wireless testbed (ensuring safe measures were taken when conducting experiments). Our experimental results demonstrate that eSWORD follows similar patterns in throughput, signal-to-noise ratio, and link status to real-world jamming experiments, testifying to the high accuracy of the emulated eSWORD setup.

cs.NI↗

arXiv2022

OpenRAN Gym: AI/ML Development, Data Collection, and Testing for O-RAN on PAWR Platforms

Open Radio Access Network (RAN) architectures will enable interoperability, openness and programmable data-driven control in next generation cellular networks. However, developing and testing efficient solutions that generalize across heterogeneous cellular deployments and scales, and that optimize network performance in such diverse environments is a complex task that is still largely unexplored. In this paper we present OpenRAN Gym, a unified, open, and O-RAN-compliant experimental toolbox for data collection, design, prototyping and testing of end-to-end data-driven control solutions for next generation Open RAN systems. OpenRAN Gym extends and combines into a unique solution several software frameworks for data collection of RAN statistics and RAN control, and a lightweight O-RAN near-real-time RAN Intelligent Controller (RIC) tailored to run on experimental wireless platforms. We first provide an overview of the various architectural components of OpenRAN Gym and describe how it is used to collect data and design, train and test artificial intelligence and machine learning O-RAN-compliant applications (xApps) at scale. We then describe in detail how to test the developed xApps on softwarized RANs and provide an example of two xApps developed with OpenRAN Gym that are used to control a network with 7 base stations and 42 users deployed on the Colosseum testbed. Finally, we show how solutions developed with OpenRAN Gym on Colosseum can be exported to real-world, heterogeneous wireless platforms, such as the Arena testbed and the POWDER and COSMOS platforms of the PAWR program. OpenRAN Gym and its software components are open-source and publicly-available to the research community. By guiding the readers through running experiments with OpenRAN Gym, we aim at providing a key reference for researchers and practitioners working on experimental Open RAN systems.

cs.NI↗

arXiv2022

Programmable and Customized Intelligence for Traffic Steering in 5G Networks Using Open RAN Architectures

5G and beyond mobile networks will support heterogeneous use cases at an unprecedented scale, thus demanding automated control and optimization of network functionalities customized to the needs of individual users. Such fine-grained control of the Radio Access Network (RAN) is not possible with the current cellular architecture. To fill this gap, the Open RAN paradigm and its specification introduce an open architecture with abstractions that enable closed-loop control and provide data-driven, and intelligent optimization of the RAN at the user level. This is obtained through custom RAN control applications (i.e., xApps) deployed on near-real-time RAN Intelligent Controller (near-RT RIC) at the edge of the network. Despite these premises, as of today the research community lacks a sandbox to build data-driven xApps, and create large-scale datasets for effective AI training. In this paper, we address this by introducing ns-O-RAN, a software framework that integrates a real-world, production-grade near-RT RIC with a 3GPP-based simulated environment on ns-3, enabling the development of xApps and automated large-scale data collection and testing of Deep Reinforcement Learning-driven control policies for the optimization at the user-level. In addition, we propose the first user-specific O-RAN Traffic Steering (TS) intelligent handover framework. It uses Random Ensemble Mixture, combined with a state-of-the-art Convolutional Neural Network architecture, to optimally assign a serving base station to each user in the network. Our TS xApp, trained with more than 40 million data points collected by ns-O-RAN, runs on the near-RT RIC and controls its base stations. We evaluate the performance on a large-scale deployment, showing that the xApp-based handover improves throughput and spectral efficiency by an average of 50% over traditional handover heuristics, with less mobility overhead.

cs.NI↗

arXiv2022

Intelligent Closed-loop RAN Control with xApps in OpenRAN Gym

Softwarization, programmable network control and the use of all-encompassing controllers acting at different timescales are heralded as the key drivers for the evolution to next-generation cellular networks. These technologies have fostered newly designed intelligent data-driven solutions for managing large sets of diverse cellular functionalities, basically impossible to implement in traditionally closed cellular architectures. Despite the evident interest of industry on Artificial Intelligence (AI) and Machine Learning (ML) solutions for closed-loop control of the Radio Access Network (RAN), and several research works in the field, their design is far from mainstream, and it is still a sophisticated and often overlooked operation. In this paper, we discuss how to design AI/ML solutions for the intelligent closed-loop control of the Open RAN, providing guidelines and insights based on exemplary solutions with high-performance record. We then show how to embed these solutions into xApps instantiated on the O-RAN near-real-time RAN Intelligent Controller (RIC) through OpenRAN Gym, the first publicly available toolbox for data-driven O-RAN experimentation at scale. We showcase a use case of an xApp developed with OpenRAN Gym and tested on a cellular network with 7 base stations and 42 users deployed on the Colosseum wireless network emulator. Our demonstration shows the high degree of flexibility of the OpenRAN Gym-based xApp development environment, which is independent of deployment scenarios and traffic demand.

cs.NI↗

arXiv2022

Terahertz Communications Can Work in Rain and Snow: Impact of Adverse Weather Conditions on Channels at 140 GHz

Next-generation wireless networks will leverage the spectrum above 100 GHz to enable ultra-high data rate communications over multi-GHz-wide bandwidths. The propagation environment at such high frequencies, however, introduces challenges throughout the whole protocol stack design, from physical layer signal processing to application design. Therefore, it is fundamental to develop a holistic understanding of the channel propagation and fading characteristics over realistic deployment scenarios and ultra-wide bands. In this paper, we conduct an extensive measurement campaign to evaluate the impact of weather conditions on a wireless link in the 130-150 GHz band through a channel sounding campaign with clear weather, rain, and snow in a typical urban backhaul scenario. We present a novel channel sounder design that captures signals with -82 dBm sensitivity and 20 GHz of bandwidth. We analyze link budget, capacity, as well as channel parameters such as the delay spread and the K-factor. Our experimental results indicate that in the considered context the adverse weather does not interrupt the link, but introduces some additional constraints (e.g., high delay spread and increase in path loss in snow conditions) that need to be accounted for in the design of reliable Sixth Generation (6G) communication links above 100 GHz.

eess.SP↗

arXiv2022

CaST: A Toolchain for Creating and Characterizing Realistic Wireless Network Emulation Scenarios

Large-scale wireless testbeds are being increasingly used in developing and evaluating new solutions for next generation wireless networks. Among others, high-fidelity FPGA-based emulation platforms have unique capabilities for faithfully modeling real-world wireless environments in real-time and at scale, while guaranteeing repeatability. However, the reliability of the solutions tested on emulation platforms heavily depends on the precision of the emulation process, which is often overlooked. To address this unmet need in wireless network emulator-based experiments, in this paper we present CaST, a Channel emulation generator and Sounder Toolchain for creating and characterizing realistic wireless network scenarios with high accuracy. CaST consists of (i) a framework for creating mobile wireless scenarios from ray-tracing models for FPGA-based emulation platforms, and (ii) a containerized Software Defined Radio-based channel sounder to precisely characterize the emulated channels. We demonstrate the use of CaST by designing, deploying and validating multi-path mobile scenarios on Colosseum, the world's largest wireless network emulator. Results show that CaST achieves <= 20 ns accuracy in sounding Channel Impulse Response tap delays, and 0.5 dB accuracy in measuring tap gains.

cs.NI↗

arXiv2022

dApps: Distributed Applications for Real-time Inference and Control in O-RAN

The Open Radio Access Network (Open RAN)-which is being standardized, among others, by the O-RAN Alliance-is bringing a radical transformation to the cellular ecosystem through the notions of disaggregation and RAN Intelligent Controllers (RICs). The latter enable closed-loop control through custom logic applications, namely xApps and rApps, supporting control decisions at different timescales. However, the current O-RAN specifications lack of a practical approach to execute real-time control loops operating at timescales below 10ms. In this paper, we propose the notion of dApps, distributed applications that complement existing xApps/rApps by allowing operators to implement fine-grained data-driven management and control in real-time at the Central Units (CUs)/Distributed Units (DUs). dApps receive real-time data from the RAN, as well as enrichment information from the near-real-time RIC, and execute inference and control of lower-layer functionalities, thus enabling use cases with stricter timing requirements than those considered by the RICs, such as beam management and user scheduling. We propose feasible ways to integrate dApps in the O-RAN architecture by leveraging and extending interfaces and components already present therein. Finally, we discuss challenges specific to dApps, and provide preliminary results that show the benefits of executing network intelligence through dApps.

cs.NI↗

arXiv2022

Understanding O-RAN: Architecture, Interfaces, Algorithms, Security, and Research Challenges

The Open Radio Access Network (RAN) and its embodiment through the O-RAN Alliance specifications are poised to revolutionize the telecom ecosystem. O-RAN promotes virtualized RANs where disaggregated components are connected via open interfaces and optimized by intelligent controllers. The result is a new paradigm for the RAN design, deployment, and operations: O-RAN networks can be built with multi-vendor, interoperable components, and can be programmatically optimized through a centralized abstraction layer and data-driven closed-loop control. Therefore, understanding O-RAN, its architecture, its interfaces, and workflows is key for researchers and practitioners in the wireless community. In this article, we present the first detailed tutorial on O-RAN. We also discuss the main research challenges and review early research results. We provide a deep dive of the O-RAN specifications, describing its architecture, design principles, and the O-RAN interfaces. We then describe how the O-RAN RAN Intelligent Controllers (RICs) can be used to effectively control and manage 3GPP-defined RANs. Based on this, we discuss innovations and challenges of O-RAN networks, including the Artificial Intelligence (AI) and Machine Learning (ML) workflows that the architecture and interfaces enable, security and standardization issues. Finally, we review experimental research platforms that can be used to design and test O-RAN networks, along with recent research results, and we outline future directions for O-RAN development.

cs.NI↗

arXiv2022

Autonomous Driving From the Sky: Design and End-to-End Performance Evaluation

For autonomous vehicles to operate without human intervention, information sharing from local sensors plays a fundamental role. This can be challenging to handle with bandwidth-constrained communication systems, which calls for the adoption of new wireless technologies, like in the mmwave bands, to solve capacity issues. Another approach is to exploit uav, able to provide human users and their cars with an aerial bird's-eye view of the scene otherwise unavailable, thus offering broader and more centralized observations. In this article we combine both aspects and design a novel framework in which uav, operating at mmwave, broadcast sensory information to the ground as a means to extend the (local) perception range of vehicles. To do so, we conduct a full-stack end-to-end simulation campaign with ns-3 considering real UAV data from the Stanford Drone Dataset, and study four scenarios representing different uav-to-ground communication strategies. Our results focus on the trade-off between centralized data processing in the sky vs. distributed local processing on the ground, with considerations related to the throughput, latency and reliability of the communication process.

cs.NI↗

arXiv2022

Neural Network-based OFDM Receiver for Resource Constrained IoT Devices

Orthogonal Frequency Division Multiplexing (OFDM)-based waveforms are used for communication links in many current and emerging Internet of Things (IoT) applications, including the latest WiFi standards. For such OFDM-based transceivers, many core physical layer functions related to channel estimation, demapping, and decoding are implemented for specific choices of channel types and modulation schemes, among others. To decouple hard-wired choices from the receiver chain and thereby enhance the flexibility of IoT deployment in many novel scenarios without changing the underlying hardware, we explore a novel, modular Machine Learning (ML)-based receiver chain design. Here, ML blocks replace the individual processing blocks of an OFDM receiver, and we specifically describe this swapping for the legacy channel estimation, symbol demapping, and decoding blocks with Neural Networks (NNs). A unique aspect of this modular design is providing flexible allocation of processing functions to the legacy or ML blocks, allowing them to interchangeably coexist. Furthermore, we study the implementation cost-benefits of the proposed NNs in resource-constrained IoT devices through pruning and quantization, as well as emulation of these compressed NNs within Field Programmable Gate Arrays (FPGAs). Our evaluations demonstrate that the proposed modular NN-based receiver improves bit error rate of the traditional non-ML receiver by averagely 61% and 10% for the simulated and over-the-air datasets, respectively. We further show complexity-performance tradeoffs by presenting computational complexity comparisons between the traditional algorithms and the proposed compressed NNs.

eess.SP↗

arXiv2022

Deep neural network goes lighter: A case study of deep compression techniques on automatic RF modulation recognition for Beyond 5G networks

Automatic RF modulation recognition is a primary signal intelligence (SIGINT) technique that serves as a physical layer authentication enabler and automated signal processing scheme for the beyond 5G and military networks. Most existing works rely on adopting deep neural network architectures to enable RF modulation recognition. The application of deep compression for the wireless domain, especially automatic RF modulation classification, is still in its infancy. Lightweight neural networks are key to sustain edge computation capability on resource-constrained platforms. In this letter, we provide an in-depth view of the state-of-the-art deep compression and acceleration techniques with an emphasis on edge deployment for beyond 5G networks. Finally, we present an extensive analysis of the representative acceleration approaches as a case study on automatic radar modulation classification and evaluate them in terms of the computational metrics.

cs.LG↗