arXiv subjects

Tommaso Melodia

Publications and source records attributed to Tommaso Melodia.

At least 145 records · Page 8Linked to original sources

arXiv2020

An Experimental mmWave Channel Model for UAV-to-UAV Communications

Unmanned Aerial Vehicle (UAV) networks can provide a resilient communication infrastructure to enhance terrestrial networks in case of traffic spikes or disaster scenarios. However, to be able to do so, they need to be based on high-bandwidth wireless technologies for both radio access and backhaul. With this respect, the millimeter wave (mmWave) spectrum represents an enticing solution, since it provides large chunks of untapped spectrum that can enable ultra-high data-rates for aerial platforms. Aerial mmWave channels, however, experience characteristics that are significantly different from terrestrial deployments in the same frequency bands. As of today, mmWave aerial channels have not been extensively studied and modeled. Specifically, the combination of UAV micro-mobility (because of imprecisions in the control loop, and external factors including wind) and the highly directional mmWave transmissions require ad hoc models to accurately capture the performance of UAV deployments. To fill this gap, we propose an empirical propagation loss model for UAV-to-UAV communications at 60 GHz, based on an extensive aerial measurement campaign conducted with the Facebook Terragraph channel sounders. We compare it with 3GPP channel models and make the measurement dataset publicly available.

cs.NI↗

arXiv2020

SwarmControl: An Automated Distributed Control Framework for Self-Optimizing Drone Networks

Networks of Unmanned Aerial Vehicles (UAVs), composed of hundreds, possibly thousands of highly mobile and wirelessly connected flying drones will play a vital role in future Internet of Things (IoT) and 5G networks. However, how to control UAV networks in an automated and scalable fashion in distributed, interference-prone, and potentially adversarial environments is still an open research problem. This article introduces SwarmControl, a new software-defined control framework for UAV wireless networks based on distributed optimization principles. In essence, SwarmControl provides the Network Operator (NO) with a unified centralized abstraction of the networking and flight control functionalities. High-level control directives are then automatically decomposed and converted into distributed network control actions that are executed through programmable software-radio protocol stacks. SwarmControl (i) constructs a network control problem representation of the directives of the NO; (ii) decomposes it into a set of distributed sub-problems; and (iii) automatically generates numerical solution algorithms to be executed at individual UAVs. We present a prototype of an SDR-based, fully reconfigurable UAV network platform that implements the proposed control framework, based on which we assess the effectiveness and flexibility of SwarmControl with extensive flight experiments. Results indicate that the SwarmControl framework enables swift reconfiguration of the network control functionalities, and it can achieve an average throughput gain of 159% compared to the state-of-the-art solutions.

cs.NI↗

arXiv2020

DeepFIR: Addressing the Wireless Channel Action in Physical-Layer Deep Learning

Deep learning can be used to classify waveform characteristics (e.g., modulation) with accuracy levels that are hardly attainable with traditional techniques. Recent research has demonstrated that one of the most crucial challenges in wireless deep learning is to counteract the channel action, which may significantly alter the waveform features. The problem is further exacerbated by the fact that deep learning algorithms are hardly re-trainable in real time due to their sheer size. This paper proposes DeepFIR, a framework to counteract the channel action in wireless deep learning algorithms without retraining the underlying deep learning model. The key intuition is that through the application of a carefully-optimized digital finite input response filter (FIR) at the transmitter's side, we can apply tiny modifications to the waveform to strengthen its features according to the current channel conditions. We mathematically formulate the Waveform Optimization Problem (WOP) as the problem of finding the optimum FIR to be used on a waveform to improve the classifier's accuracy. We also propose a data-driven methodology to train the FIRs directly with dataset inputs. We extensively evaluate DeepFIR on a experimental testbed of 20 software-defined radios, as well as on two datasets made up by 500 ADS-B devices and by 500 WiFi devices and a 24-class modulation dataset. Experimental results show that our approach (i) increases the accuracy of the radio fingerprinting models by about 35%, 50% and 58%; (ii) decreases an adversary's accuracy by about 54% when trying to imitate other device's fingerprints by using their filters; (iii) achieves 27% improvement over the state of the art on a 100-device dataset; (iv) increases by 2x the accuracy of the modulation dataset.

cs.NI↗

arXiv2020

PolymoRF: Polymorphic Wireless Receivers Through Physical-Layer Deep Learning

Today's wireless technologies are largely based on inflexible designs, which makes them inefficient and prone to a variety of wireless attacks. To address this key issue, wireless receivers will need to (i) infer on-the-fly the physical-layer parameters currently used by transmitters; and if needed, (ii) change their hardware and software structures to demodulate the incoming waveform. In this paper, we introduce PolymoRF, a deep learning-based polymorphic receiver able to reconfigure itself in real time based on the inferred waveform parameters. Our key technical innovations are (i) a novel embedded deep learning architecture, called RFNet, which enables the solution of key waveform inference problems; (ii) a generalized hardware/software architecture that integrates RFNet with radio components and signal processing. We prototype PolymoRF on a custom software-defined radio platform, and show through extensive over-the-air experiments that (i) RFNet achieves similar accuracy to that of state-of-the-art yet with 52x and 8x latency and hardware reduction; (ii) PolymoRF achieves throughput within 87% of a perfect-knowledge Oracle system, thus demonstrating for the first time that polymorphic receivers are feasible and effective.

cs.NI↗

arXiv2020

Hacking the Waveform: Generalized Wireless Adversarial Deep Learning

This paper advances the state of the art by proposing the first comprehensive analysis and experimental evaluation of adversarial learning attacks to wireless deep learning systems. We postulate a series of adversarial attacks, and formulate a Generalized Wireless Adversarial Machine Learning Problem (GWAP) where we analyze the combined effect of the wireless channel and the adversarial waveform on the efficacy of the attacks. We propose a new neural network architecture called FIRNet, which can be trained to "hack" a classifier based only on its output. We extensively evaluate the performance on (i) a 1,000-device radio fingerprinting dataset, and (ii) a 24-class modulation dataset. Results obtained with several channel conditions show that our algorithms can decrease the classifier accuracy up to 3x. We also experimentally evaluate FIRNet on a radio testbed, and show that our data-driven blackbox approach can confuse the classifier up to 97% while keeping the waveform distortion to a minimum.

cs.NI↗

arXiv2020

Sl-EDGE: Network Slicing at the Edge

Network slicing of multi-access edge computing (MEC) resources is expected to be a pivotal technology to the success of 5G networks and beyond. The key challenge that sets MEC slicing apart from traditional resource allocation problems is that edge nodes depend on tightly-intertwined and strictly-constrained networking, computation and storage resources. Therefore, instantiating MEC slices without incurring in resource over-provisioning is hardly addressable with existing slicing algorithms. The main innovation of this paper is Sl-EDGE, a unified MEC slicing framework that allows network operators to instantiate heterogeneous slice services (e.g., video streaming, caching, 5G network access) on edge devices. We first describe the architecture and operations of Sl-EDGE, and then show that the problem of optimally instantiating joint network-MEC slices is NP-hard. Thus, we propose near-optimal algorithms that leverage key similarities among edge nodes and resource virtualization to instantiate heterogeneous slices 7.5x faster and within 0.25 of the optimum. We first assess the performance of our algorithms through extensive numerical analysis, and show that Sl-EDGE instantiates slices 6x more efficiently then state-of-the-art MEC slicing algorithms. Furthermore, experimental results on a 24-radio testbed with 9 smartphones demonstrate that Sl-EDGE provides at once highly-efficient slicing of joint LTE connectivity, video streaming over WiFi, and ffmpeg video transcoding.

cs.NI↗

arXiv2020

CoBeam: Beamforming-based Spectrum Sharing With Zero Cross-Technology Signaling for 5G Wireless Networks

This article studies an essential yet challenging problem in 5G wireless networks: \emph{Is it possible to enable spectrally-efficient spectrum sharing for heterogeneous wireless networks with different, possibly incompatible, spectrum access technologies on the same spectrum bands; without modifying the protocol stacks of existing wireless networks?} To answer this question, this article explores the system challenges that need to be addressed to enable a new spectrum sharing paradigm based on beamforming, which we refer to as {\em CoBeam}. In CoBeam, a secondary wireless network is allowed to access a spectrum band based on {\em cognitive beamforming} without mutual temporal exclusion, i.e., without interrupting the ongoing transmissions of coexisting wireless networks on the same bands; and without cross-technology communication. We first describe the main components of CoBeam, including \emph{programmable physical layer driver}, \emph{cognitive sensing engine}, and \emph{beamforming engine}, and then we showcase the potential of the CoBeam framework by designing a practical coexistence scheme between Wi-Fi and LTE on unlicensed bands. We present a prototype of the resulting coexisting Wi-Fi/U-LTE network built on off-the-shelf software radios based on which we evaluate the performance of CoBeam through an extensive experimental campaign. Performance evaluation results indicate that CoBeam can achieve on average $169\%$ throughput gain while requiring \emph{no} signaling exchange between the coexisting wireless networks.

cs.NI↗

arXiv2019

Machine Learning for Wireless Communications in the Internet of Things: A Comprehensive Survey

The Internet of Things (IoT) is expected to require more effective and efficient wireless communications than ever before. For this reason, techniques such as spectrum sharing, dynamic spectrum access, extraction of signal intelligence and optimized routing will soon become essential components of the IoT wireless communication paradigm. Given that the majority of the IoT will be composed of tiny, mobile, and energy-constrained devices, traditional techniques based on a priori network optimization may not be suitable, since (i) an accurate model of the environment may not be readily available in practical scenarios; (ii) the computational requirements of traditional optimization techniques may prove unbearable for IoT devices. To address the above challenges, much research has been devoted to exploring the use of machine learning to address problems in the IoT wireless communications domain. This work provides a comprehensive survey of the state of the art in the application of machine learning techniques to address key problems in IoT wireless communications with an emphasis on its ad hoc networking aspect. First, we present extensive background notions of machine learning techniques. Then, by adopting a bottom-up approach, we examine existing work on machine learning for the IoT at the physical, data-link and network layer of the protocol stack. Thereafter, we discuss directions taken by the community towards hardware implementation to ensure the feasibility of these techniques. Additionally, before concluding, we also provide a brief discussion of the application of machine learning in IoT beyond wireless communication. Finally, each of these discussions is accompanied by a detailed analysis of the related open problems and challenges.

cs.NI↗

arXiv2019

Toward Operator-to-Waveform 5G Radio Access Network Slicing

Radio access network (RAN) slicing realizes a vision where physical network resources that belong to a specific infrastructure provider can be shared among multiple mobile network operators (MNOs). Existing work in this area has addressed RAN slicing at different levels of network abstractions, but has often neglected the multitude of tightly intertwined inter-level operations involved in real-world slicing systems. For this reason, this article discusses a novel framework for operator-to-waveform 5G RAN slicing. In the proposed framework, slicing operations are treated holistically, including MNO's selection of base stations (BSs) and maximum number of users, down to the waveform-level scheduling of resource blocks. Experimental results show that the proposed framework provides up to 150% improvement in terms of number of resource blocks that can be used to enable 5G transmission technologies that require coordination and synchronization among BSs.

cs.NI↗

arXiv2019

Hiding Data in Plain Sight: Undetectable Wireless Communications Through Pseudo-Noise Asymmetric Shift Keying

Undetectable wireless transmissions are fundamental to avoid eavesdroppers. To address this issue, wireless steganography hides covert information inside primary information by slightly modifying the transmitted waveform such that primary information will still be decodable, while covert information will be seen as noise by agnostic receivers. Since the addition of covert information inevitably decreases the SNR of the primary transmission, key challenges in wireless steganography are: i) to assess the impact of the covert channel on the primary channel as a function of different channel conditions; and ii) to make sure that the covert channel is undetectable. Existing approaches are protocol-specific, also we notice that existing wireless technologies rely on phase-keying modulations that in most cases do not use the channel up to its Shannon capacity. Therefore, the residual capacity can be leveraged to implement a wireless system based on a pseudo-noise asymmetric shift keying (PN-ASK) modulation, where covert symbols are mapped by shifting the amplitude of primary symbols. This way, covert information will be undetectable, since a receiver expecting phase-modulated symbols will see their shift in amplitude as an effect of channel/path loss degradation. We first investigate the SER of PN-ASK as a function of the channel; then, we find the optimal PN-ASK parameters that optimize primary and covert throughput under different channel condition. We evaluate the throughput performance and undetectability of PN-ASK through extensive simulations and on an experimental testbed based on USRP N210 software-defined radios. We show that PN-ASK improves the throughput by more than 8x with respect to prior art. Finally, we demonstrate through experiments that PN-ASK is able to transmit covert data on top of IEEE 802.11g frames, which are correctly decoded by an off-the-shelf laptop WiFi.

cs.CR↗

arXiv2019

Jam Sessions: Analysis and Experimental Evaluation of Advanced Jamming Attacks in MIMO Networks

In advanced jamming, the adversary intentionally concentrates the available energy budget on specific critical components (e.g., pilot symbols, acknowledgement packets, etc.) to (i) increase the jamming effectiveness, as more targets can be jammed with the same energy budget; and (ii) decrease the likelihood of being detected, as the channel is jammed for a shorter period of time. One of the fundamental challenges in designing defense mechanisms against an advanced jammer is understanding which jamming strategies yields the lowest throughput, for a given channel condition and a given amount of energy. To the best of our knowledge, this problem still remains unsolved. To fill this gap, in this paper we conduct a comparative analysis of several most viable advanced jamming schemes in the widely-used MIMO networks. We first mathematically model a number of advanced jamming schemes at the signal processing level, so that a quantitative relationship between the jamming energy and the jamming effect is established. Based on the model, theorems are derived on the optimal advanced jamming scheme for an arbitrary channel condition. The theoretical findings are validated through extensive simulations and experiments on a 5-radio 2x2 MIMO testbed. Our results show that the theorems are able to predict jamming efficiency with high accuracy. Moreover, we show that the theorems can be incorporated to state-of-art reinforcement learning based jamming algorithms and boost the action exploration phase so that a faster convergence is achieved.

cs.NI↗

arXiv2019

DeepRadioID: Real-Time Channel-Resilient Optimization of Deep Learning-based Radio Fingerprinting Algorithms

Radio fingerprinting provides a reliable and energy-efficient IoT authentication strategy. By mapping inputs onto a very large feature space, deep learning algorithms can be trained to fingerprint large populations of devices operating under any wireless standard. One of the most crucial challenges in radio fingerprinting is to counteract the action of the wireless channel, which decreases fingerprinting accuracy significantly by disrupting hardware impairments. On the other hand, due to their sheer size, deep learning algorithms are hardly re-trainable in real-time. Another aspect that is yet to be investigated is whether an adversary can successfully impersonate another device fingerprint. To address these key issues, this paper proposes DeepRadioID, a system to optimize the accuracy of deep-learning-based radio fingerprinting algorithms without retraining the underlying deep learning model. We extensively evaluate DeepRadioID on a experimental testbed of 20 nominally-identical software-defined radios, as well as on two datasets made up by 500 ADS-B devices and by 500 WiFi devices provided by the DARPA RFMLS program. Experimental results show that DeepRadioID (i) increases fingerprinting accuracy by about 35%, 50% and 58% on the three scenarios considered; (ii) decreases an adversary's accuracy by about 54% when trying to imitate other device fingerprints by using their filters; (iii) achieves 27% improvement over the state of the art on a 100-device dataset.

cs.NI↗

arXiv2019

VL-ROUTE: A Cross-Layer Routing Protocol for Visible Light Ad Hoc Network

Visible Light Ad Hoc Networks (LANETs) is being perceived as an emerging technology to complement Radio Frequency (RF) based ad hoc networks to reduce congestion in the overloaded RF spectrum. LANET is intended to support scenarios requiring dense deployment and high data rates. In Visible Light Communication (VLC), most of the attention has been centered around physical layer with emphasis on point-to-point communication. In this work, we focus on designing a routing protocol specifically to overcome the unique challenges like blockage and deafness that render routes in LANETs highly unstable. Therefore, we propose a cross-layer optimized routing protocol (VL-ROUTE) that interacts closely with the Medium Access Control (MAC) layer to maximize the throughput of the network by taking into account the reliability of routes. To accomplish this in a distributed manner, we carefully formulate a Route Reliability Score (RRS) that can be computed by each node in the network using just the information gathered from its immediate neighbors. Each node computes an RRS for every known sink in the network. RRS of a given node can be considered as an estimate of the probability of reaching a given sink via that node. The RSS value is then integrated to the utility based three-way handshake process used by the MAC protocol (VL-MAC) to mitigate the effects of deafness, blockage, hidden node, and maximize the probability of establishing full-duplex links. All these factors contribute towards maximizing the network throughput. Extensive simulation of VL-ROUTE shows 124% improvement in network throughput over a network that uses Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) along with shortest path routing. Additionally, VL-ROUTE also showed up to 21% improvement in throughput over the network that uses VL-MAC along with a geographic routing.

cs.NI↗

arXiv2019

Blockchain for the Internet of Things: Present and Future

One of the key challenges to the IoT's success is how to secure and anonymize billions of IoT transactions and devices per day, an issue that still lingers despite significant research efforts over the last few years. On the other hand, technologies based on blockchain algorithms are disrupting today's cryptocurrency markets and showing tremendous potential, since they provide a distributed transaction ledger that cannot be tampered with or controlled by a single entity. Although the blockchain may present itself as a cure-all for the IoT's security and privacy challenges, significant research efforts still need to be put forth to adapt the computation-intensive blockchain algorithms to the stringent energy and processing constraints of today's IoT devices. In this paper, we provide an overview of existing literature on the topic of blockchain for IoT, and present a roadmap of research challenges that will need to be addressed to enable the usage of blockchain technologies in the IoT.

cs.CR↗

arXiv2019

Big Data Goes Small: Real-Time Spectrum-Driven Embedded Wireless Networking Through Deep Learning in the RF Loop

The explosion of 5G networks and the Internet of Things will result in an exceptionally crowded RF environment, where techniques such as spectrum sharing and dynamic spectrum access will become essential components of the wireless communication process. In this vision, wireless devices must be able to (i) learn to autonomously extract knowledge from the spectrum on-the-fly; and (ii) react in real time to the inferred spectrum knowledge by appropriately changing communication parameters, including frequency band, symbol modulation, coding rate, among others. Traditional CPU-based machine learning suffers from high latency, and requires application-specific and computationally-intensive feature extraction/selection algorithms. In this paper, we present RFLearn, the first system enabling spectrum knowledge extraction from unprocessed I/Q samples by deep learning directly in the RF loop. RFLearn provides (i) a complete hardware/software architecture where the CPU, radio transceiver and learning/actuation circuits are tightly connected for maximum performance; and (ii) a learning circuit design framework where the latency vs. hardware resource consumption trade-off can explored. We implement and evaluate the performance of RFLearn on custom software-defined radio built on a system-on-chip (SoC) ZYNQ-7000 device mounting AD9361 radio transceivers and VERT2450 antennas. We showcase the capabilities of RFLearn by applying it to solving the fundamental problems of modulation and OFDM parameter recognition. Experimental results reveal that RFLearn decreases latency and power by about 17x and 15x with respect to a software-based solution, with a comparatively low hardware resource consumption.

cs.NI↗

arXiv2019

The Slice Is Served: Enforcing Radio Access Network Slicing in Virtualized 5G Systems

The notions of softwarization and virtualization of the radio access network (RAN) of next-generation (5G) wireless systems are ushering in a vision where applications and services are physically decoupled from devices and network infrastructure. This crucial aspect will ultimately enable the dynamic deployment of heterogeneous services by different network operators over the same physical infrastructure. RAN slicing is a form of 5G virtualization that allows network infrastructure owners to dynamically "slice" and "serve" their network resources (i.e., spectrum, power, antennas, among others) to different mobile virtual network operators (MVNOs), according to their current needs. Once the slicing policy (i.e., the percentage of resources assigned to each MVNO) has been computed, a major challenge is how to allocate spectrum resources to MVNOs in such a way that (i) the slicing policy defined by the network owner is enforced; and (ii) the interference among different MVNOs is minimized. In this article, we mathematically formalize the RAN slicing enforcement problem (RSEP) and demonstrate its NP-hardness. For this reason, we design three approximation algorithms that render the solution scalable as the RSEP increases in size. We extensively evaluate their performance through simulations and experiments on a testbed made up of 8 software-defined radio peripherals. Experimental results reveal that not only do our algorithms enforce the slicing policies, but can also double the total network throughput when intra-MVNO power control policies are used in conjunction.

cs.NI↗

arXiv2018

Securing the Internet of Things in the Age of Machine Learning and Software-defined Networking

The Internet of Things (IoT) realizes a vision where billions of interconnected devices are deployed just about everywhere, from inside our bodies to the most remote areas of the globe. As the IoT will soon pervade every aspect of our lives and will be accessible from anywhere, addressing critical IoT security threats is now more important than ever. Traditional approaches where security is applied as an afterthought and as a "patch" against known attacks are insufficient. Indeed, next-generation IoT challenges will require a new secure-by-design vision, where threats are addressed proactively and IoT devices learn to dynamically adapt to different threats. To this end, machine learning and software-defined networking will be key to provide both reconfigurability and intelligence to the IoT devices. In this paper, we first provide a taxonomy and survey the state of the art in IoT security research, and offer a roadmap of concrete research challenges related to the application of machine learning and software-defined networking to address existing and next-generation IoT security threats.

cs.CR↗

arXiv2018

Low-Complexity Distributed Radio Access Network Slicing: Algorithms and Experimental Results

Radio access network (RAN) slicing is an effective methodology to dynamically allocate networking resources in 5G networks. One of the main challenges of RAN slicing is that it is provably an NP-Hard problem. For this reason, we design near-optimal low-complexity distributed RAN slicing algorithms. First, we model the slicing problem as a congestion game, and demonstrate that such game admits a unique Nash equilibrium (NE). Then, we evaluate the Price of Anarchy (PoA) of the NE, i.e., the efficiency of the NE as compared to the social optimum, and demonstrate that the PoA is upper-bounded by 3/2. Next, we propose two fully-distributed algorithms that provably converge to the unique NE without revealing privacy-sensitive parameters from the slice tenants. Moreover, we introduce an adaptive pricing mechanism of the wireless resources to improve the network owner's profit. We evaluate the performance of our algorithms through simulations and an experimental testbed deployed on the Amazon EC2 cloud, both based on a real-world dataset of base stations from the OpenCellID project. Results conclude that our algorithms converge to the NE rapidly and achieve near-optimal performance, while our pricing mechanism effectively improves the profit of the network owner.

cs.NI↗