arXiv subjects

Shohei Chiashi

Publications and source records attributed to Shohei Chiashi.

11 recordsLinked to original sources

arXiv2026

Janus-induced atomic reconstruction amplifies twist-angle modulation of interlayer thermal transport in moir\'e bilayers

In two-dimensional moir\'e bilayers, atomic reconstruction, the spontaneous structural relaxation toward energy-minimizing stacking registries in the near-commensurate regime, can strongly modify local stacking and interlayer coupling, providing a possibility to significantly control phonon-mediated properties. Here we show that the twist-angle dependence of interlayer thermal conductance can be modified by introducing Janus-induced mirror-symmetry breaking into bilayer MoS2. The intrinsic out-of-plane dipole in MoSSe/MoS2 bilayers leads to frictionless interface, and reduces the lattice deformation energy, thereby promoting atomic-reconstruction into locally distorted aperiodic moir\'e patterns. These features weaken interlayer coupling and suppress phonon transmission across the interface, leading to an anomalously strong twist-angle dependence of thermal conductance, with a pronounced minimum at small twist angles and a reduction rate nearly one order of magnitude larger than that of twisted bilayer MoS2. Our results demonstrate that interlayer thermal transport is modified by atomic reconstruction, highlighting Janus-induced mirror-symmetry breaking as an effective way to promoting phonon engineering in two-dimensional moir\'e structures.

cond-mat.mes-hall↗

arXiv2026

Structures of iron and cobalt bimetallic clusters for optimized chemical vapor deposition growth of single-walled carbon nanotubes

We investigate iron-cobalt (Fe-Co) alloys as a representative high-performance catalyst system for SWCNT growth in a systematic manner by combining chemical vapor deposition (CVD) experiments with chirality-resolved spectroscopic analysis, as well as molecular dynamics (MD) simulations based on density functional theory-derived machine learning force fields while varying the Fe-Co ratio. Using zeolite-based SWCNTs prepared by alcohol CVD, absorption and photoluminescence spectroscopy, together with two-dimensional excitation-emission fitting was employed to quantify chirality-specific growth efficiency. Two distinct growth regimes were identified. At a relatively low temperature of 600 C, pure Co exhibits the highest catalytic activity, promoting efficient growth of small-diameter (0.7-0.9 nm) SWCNTs. In contrast, at 850 C, the Fe0.75Co0.25 alloy shows a pronounced enhancement in growth efficiency compared with pure Fe, pure Co, and other Fe-Co compositions, also yielding larger diameter tubes (0.9-1.1nm). Similar growth behavior was observed on SiO2 substrates, enabling detailed transmission electron microscopy analysis of catalyst nanoparticles. Electron microscopy and energy-dispersive X-ray spectroscopy reveal that high SWCNT yields correlate with the formation of small, uniform Fe-Co nanoparticles with Co-enriched surfaces, in excellent agreement with MD simulations. Lastly, MD results are summarized in a composition-diameter phase diagram that rationalizes the experimentally observed growth trends. The exceptional performance of the Fe0.75Co0.25 catalyst at high temperature is attributed to the stabilization of small and uniform catalyst clusters, providing mechanistic insight into the synergistic roles of alloy composition and temperature in SWCNT growth.

cond-mat.mtrl-sci↗

arXiv2025

Analysis of Fe and Co binary catalysts in chemical vapor deposition growth of single-walled carbon nanotubes

Metal catalysts play a pivotal role in the growth of single-walled carbon nanotubes (SWCNTs), with binary metallic catalysts emerging as an efficient SWCNT synthesis strategy. Among these, iron (Fe), cobalt (Co), and their alloys are particularly effective. However, prior studies have predominantly employed Fe--Co alloy catalysts with fixed atomic ratios as well as unchanged chemical vapor deposition (CVD) conditions, leaving the influence of variable Fe--Co compositions and CVD growth parameters on SWCNT synthesis poorly understood. This study focuses on the role of Fe--Co catalyst ratios, with the aim of elucidating the distinct contributions of Fe and Co atoms in the growth of SWCNTs. By systematically exploring a wide range of Fe--Co ratios and growth conditions, we identified Fe$_{0.75}$Co$_{0.25}$ as a highly efficient binary catalyst at 850~$^\circ$C, primarily forming catalyst clusters with diameters of 2.5--6~nm and yielding SWCNTs with diameters ranging from 0.9--1.1~nm. On the other hand, Fe$_{0}$Co$_{1}$ exhibited higher catalytic activity at 600~$^\circ$C, generating smaller catalyst clusters of 1.5--5~nm and producing SWCNTs with reduced diameters of about 0.6--0.9~nm. Transmission electron microscope (TEM) and energy dispersive X-ray spectroscopy (EDS) analyses reveal that high SWCNT yields correlate with the formation of uniformly sized Fe--Co catalyst particles with surface-segregated Co that optimizes carbon solubility. Molecular dynamics (MD) simulations further corroborate these findings, demonstrating that the structure and melting behavior of Fe$_x$Co$_{1-x}$ clusters depend on cluster size and composition.

cond-mat.mtrl-sci↗

arXiv2024

Low-Temperature Synthesis of Weakly Confined Carbyne inside Single-Walled Carbon Nanotubes

Carbyne, a one-dimensional (1D) carbon allotrope with alternating triple and single bonds, has the highest known mechanical strength but is unstable to bending, limiting synthesis to short linear chains. Encapsulation within carbon nanotubes (CNTs) stabilizes carbyne, forming confined carbyne (CC), thus enabling further research concerning attractive 1D physics and materials properties of carbyne. While CC has been synthesized in multi-walled CNTs (MWCNTs) using the arc-discharge method and in double-walled CNTs (DWCNTs) via high-temperature high-vacuum (HTHV) method, synthesis in single-walled CNTs (SWCNTs) has been challenging due to their fragility under such conditions. In this work, we report a low-temperature method to synthesize CC inside SWCNTs (CC@SWCNT). By annealing SWCNTs containing ammonium deoxycholate (ADC) at 400{\deg}C, ADC is converted into CC without damaging the SWCNTs. Raman spectroscopy revealed a strong CC phonon (CC-mode) peak at 1860-1870 cm^-1, much stronger than the SWCNT G-band peak, confirming a high fraction of CC in the resulting material. The Raman mapping result showed the uniformity of the CC-mode signal across the entire film sample, proving the high efficiency of this method in synthesizing CC in every SWCNT of appropriate size. Notably, the CC-mode peaks of CC@SWCNT (above 1860 cm^-1) are higher than those reported in previous CC@CNT samples (mostly less than 1856 cm^-1). This is attributed to larger SWCNT diameters (over 0.95 nm) used in this study, compared to the typical 0.6-0.8 nm range. Larger diameters result in reduced confinement, allowing carbyne to closely resemble free-standing carbyne while remaining stabilized. This low-temperature synthesis of long-chain, nearly free-standing carbyne within large-diameter SWCNTs offers new opportunities for exploring 1D physics and the unique properties of carbyne for potential applications.

physics.chem-ph↗

arXiv2024

Statistical modeling of equilibrium phase transition in confined fluids

The phase transition of confined fluids in mesoporous materials deviates from that of bulk fluids due to the interactions with the surrounding heterogeneous structure. For example, adsorbed fluids in metal-organic-frameworks (MOFs) have atypical phase characteristics such as capillary condensation and higher-order phase transitions due to a strong heterogeneous field. Considering a many-body problem in the presence of a nonuniform external field, we model the host-guest and guest-guest interactions in MOFs. To solve the three-dimensional Ising model, we use the mean-field theory to approximate the guest-guest interactions and Mayer's f-functions to describe the host-guest interactions in a unit cell. Later, using Hill's theory of nanothermodynamics, we define differential thermodynamic functions to understand the distribution of intensive properties and integral thermodynamic functions to explain the phase transition in confined fluids. The investigation reveals a distinct behavior where fluids confined in larger pores undergo a discontinuous (first-order) phase transition, whereas those confined in smaller pores experience a continuous (higher-order) phase transition. Furthermore, the results indicate that the free-energy barrier for phase transitions is lower in confined fluids than in bulk fluids giving rise to a lower condensation pressure relative to the bulk saturation pressure. Finally, the integral thermodynamic functions are succinctly presented in the form of a phase diagram, marking an initial step toward a more practical approach for understanding the phase behavior of confined fluids.

cond-mat.soft↗

arXiv2022

Trion confinement in monolayer MoSe2 by carbon nanotube local gating

We have successfully confined trions into a one-dimensional restricted space of a MoSe2 device with CNT gate electrodes. The dry transfer process, including deterministic dry transfer of aligned CNTs, has led to an hBN-encapsulated MoSe2 device with CNT back gate electrodes. In contrast to a location without CNT gate electrodes, applying voltage via CNT gate electrodes significantly alters PL spectra at a location with CNT gate electrodes. PL imaging has revealed that image contrast from trions is linear along the CNT electrode underneath, consistent with 1D confinement of trions in response to the CNT local gating. The confinement width obtained from the PL image is 5.5 x 10^2 nm, consistent with nanoscale 1D confined trions with the diffraction limit broadening. This work has demonstrated electrical control of excitonic states at the nanoscale, leading to novel optoelectronic properties and exciton devices in the future.

cond-mat.mes-hall↗

arXiv2021

One-dimensional van der Waals Heterostructures: Growth Mechanism and Handedness Correlation Revealed by Non-destructive TEM

In this work, we perform a follow-up and comprehensive study on the structural details and formation mechanism of chemical vapor deposition (CVD) synthesized one-dimensional (1D) van der Waals heterostructures. Edge structures, nucleation sites, crystal epitaxial relationships are clearly revealed using transmission electron microscopy (TEM). This is achieved by the direct synthesis of heteronanotubes on a CVD-compatible Si/SiO2 TEM grid, which enabled a transfer-free and non-destructive access to many intrinsic structural details. In particular, we have distinguished different shaped boron nitride nanotube (BNNT) edges, which are confirmed, by electron diffraction at the same location, to be strictly associated with its own chiral angle and polarity. We also demonstrate the importance of surface cleanness and isolation for the formation of perfect 1D heterostructures. Furthermore, we elucidate the handedness correlation between SWCNT template and BNNT crystals. This work not only provides an in-depth understanding of this new 1D heterostructure material group, but also, in a more general perspective, serves as an interesting investigation on crystal growth on highly curved (radius of a couple of nm) atomic substrates.

cond-mat.mtrl-sci↗

arXiv2020

Photoluminescence from Single-Walled MoS$_2$ Nanotubes Coaxially Grown on Boron Nitride Nanotubes

Single- and multi-walled molybdenum disulfide (MoS$_2$) nanotubes have been coaxially grown on small diameter boron nitride nanotubes (BNNTs) which were synthesized from heteronanotubes by removing single-walled carbon nanotubes (SWCNTs), and systematically investigated by optical spectroscopy. The strong photoluminescence (PL) from single-walled MoS$_2$ nanotubes supported by core BNNTs is observed in this work, which evidences a direct band gap structure for single-walled MoS$_2$ nanotubes with around 6 - 7 nm in diameter. The observation is consistent with our DFT results that the single-walled MoS$_2$ nanotube changes from an indirect-gap to a direct-gap semiconductor when the diameter of a nanotube is more than around 5 nm. On the other hand, when there are SWCNTs inside the heteronanotubes of BNNTs and MoS$_2$ nanotubes, the PL signal is considerably quenched. The charge transfer and energy transfer between SWCNTs and single-walled MoS$_2$ nanotubes were examined through characterizations by PL, XPS, and Raman spectroscopy. Unlike the single-walled MoS$_2$ nanotubes, multi-walled MoS$_2$ nanotubes do not emit light. Single- and multi-walled MoS$_2$ nanotubes exhibit different Raman features in both resonant and non-resonant Raman spectra. The method of assembling heteronanotubes using BNNTs as templates provides an efficient approach for exploring the electronic and optical properties of other transition metal dichalcogenide nanotubes.

cond-mat.mtrl-sci↗

arXiv2020

One-dimensional van der Waals heterojunction diode

The synthesis of one-dimensional van der Waals heterostructures was realized recently, which opens up new possibilities for prospective applications in electronics and optoelectronics. The even reduced dimension will enable novel properties and further miniaturization beyond the capabilities of its two-dimensional counterparts have revealed. The natural doping results in p-type electrical characteristics for semiconducting single-walled carbon nanotubes, while n-type for molybdenum disulfide with conventional noble metal contacts. Therefore, we demonstrate here a one-dimensional heterostructure nanotube of 11-nm-wide, with the coaxial assembly of semiconducting single-walled carbon nanotube, insulating boron nitride nanotube, and semiconducting molybdenum disulfide nanotube which induces a radial semiconductor-insulator-semiconductor heterojunction. When opposite potential polarity was applied on semiconducting single-walled carbon nanotube and molybdenum disulfide nanotube, respectively, the rectifying effect was materialized.

cond-mat.mes-hall↗

arXiv2020

Indirect-to-direct band gap crossover of single walled MoS$_2$ nanotubes

Using density functional theory, the electronic structures of single walled molybdenum disulfide nanotubes (MoS$_2$ NTs) were investigated as a function of diameter. Our calculations show that the electronic structure near the band gap is sensitive to the NT diameter: armchair MoS$_2$ NTs act as indirect gap semiconductors for diameters up to approximately 5.0 nm, while armchair MoS$_2$ NTs with larger diameters act as direct gap semiconductors with band edges located in the vicinity of $k = 2\pi/3$. This finding implies that MoS$_2$ NTs with large diameters should exhibit similar photoluminescence to 2D monolayer MoS$_2$ sheets. This indirect-to-direct band gap crossover is ascribed to the upward shift of the valence band peak at the $\Gamma$ point in small diameter NTs, which is caused by the tensile strain resulting from their tubular structures.

cond-mat.mtrl-sci↗

arXiv2018

One-dimensional van der Waals heterostructures

Property by design is one appealing idea in material synthesis but hard to achieve in practice. A recent successful example is the demonstration of van der Waals (vdW) heterostructures,1-3 in which atomic layers are stacked on each other and different ingredients can be combined beyond symmetry and lattice matching. This concept, usually described as a nanoscale Lego blocks, allows to build sophisticated structures layer by layer. However, this concept has been so far limited in two dimensional (2D) materials. Here we show a class of new material where different layers are coaxially (instead of planarly) stacked. As the structure is in one dimensional (1D) form, we name it "1D vdW heterostructures". We demonstrate a 5 nm diameter nanotube consisting of three different materials: an inner conductive carbon nanotube (CNT), a middle insulating hexagonal boron nitride nanotube (BNNT) and an outside semiconducting MoS2 nanotube. As the technique is highly applicable to other materials in the current 2D libraries,4-6 we anticipate our strategy to be a starting point for discovering a class of new semiconducting nanotube materials. A plethora of function-designable 1D heterostructures will appear after the combination of CNTs, BNNTs and semiconducting nanotubes.

cond-mat.mtrl-sci↗