arXiv subjects

Jack Kramer

Publications and source records attributed to Jack Kramer.

At least 19 recordsLinked to original sources

arXiv2026

Emergence of millimeter-wave resonances in self-assembled ferroelectric metamaterials

Resonators are a key component in modern communications and computing. As demand and technological advances push component requirements into the terahertz regime, there is significant research devoted to the search for resonances at these frequencies. While uniform solid-state materials usually do not intrinsically feature resonances in this frequency range, self-assembled periodic arrays of ferroelectric nanodomains may provide an engineering route to design millimeter-wave properties. Here, we utilize prototypical dielectric-ferroelectric SrTiO3/PbTiO3 superlattices to robustly design periodic ferroelectric nano-scale domains. Phase field simulations predict an emergent domain breathing mode in complex polar textures and state-of-the-art millimeter-wave characterization shows evidence for such emergent resonances up to hundreds of GHz. Complex polar textures in these superlattices lead to emergent piezoelectric properties that also result in millimeter-wave resonances, which are predicted by second principles methods and confirmed by direct measurement. The principles investigated in this work suggest a new modality for ferroelectrics in the design of millimeter-wave electronics.

cond-mat.mtrl-sci↗

arXiv2026

Nonlinear Characterization of Thin-Film LiNbO3 Acoustic Filters

Compact, high-performance components in millimeter-wave (mmWave) communication systems demand new acoustic filter technology at increasingly higher frequencies. Among various promising mmWave platforms, first-order antisymmetric (A1) mode laterally excited bulk acoustic resonators (XBARs) in thin-film lithium niobate (LiNbO3) have perhaps the most impressive linear performance. Despite these advances, there are few reports of nonlinear characterization of LiNbO3 filters at mmWaves. Here, we address this gap by developing a new nonlinear methodology for high-frequency filters. The result is a methodology for performing power-dependent S-parameters and third-order intermodulation (IMD3) measurements. To test our methodology, we fabricated filters on transferred single-crystal LiNbO3 films on sapphire (Al2O3) and silicon (Si) substrates with amorphous silicon (aSi) sacrificial layer. At 21.8 GHz, the filters on Al2O3 demonstrated an insertion loss of 1.48 dB, a 3 dB fractional bandwidth (FBW) of 17.7%, and in-band third-order input intercept points (IIP3) of 50.8 dBm. At 21.6 GHz, the filters on silicon demonstrated an insertion loss of 2.47 dB, a 3 dB FBW of 18.6%, and in-band IIP3 of 46.5 dBm. The nonlinear results conclusively show that thermal stability and passband distortion improved on the Al2O3 substrate, confirming that substrate selection plays a pivotal role in mitigating nonlinearity in acoustic front-end modules.

eess.SP↗

arXiv2026

Uncooled low-noise thin-film optomechanical resonator for thermal sensing on lithium niobate

Optomechanical transduction harnesses the interaction between optical fields and mechanical motion to achieve sensitive measurement of weak mechanical quantities with inherently low noise. Lithium niobate combines low optical loss, strong piezoelectricity, high intrinsic fQ_m factor, and low thermal conductivity, making it promising for exploring optomechanical platforms targeting thermal sensing applications. Here, we developed an integrated optomechanical platform on thin-film lithium niobate with precisely engineered optical, mechanical, and thermal fields within a compact 40 {\mu}m by 40 {\mu}m footprint. The platform integrates suspended microring resonators with ultrathin central membranes, reducing mechanical stiffness and effective mass while maintaining a high optical factor Q_o of 1e6 and mechanical quality factor Q_m of 1117, which increases to 5.1e4 after oscillation. The design suppresses thermal dissipation into the silicon substrate and enhances thermal sensitivity, achieving a temperature coefficient of frequency of -124 ppm/K and a noise-equivalent power of 6.2 nW/sqrt(Hz) at 10 kHz at room temperature. This compact and scalable platform opens up new opportunities for high-sensitivity thermal sensing, supports heterogeneous integration with infrared absorbers for uncooled infrared detection, and enables fully integrated, all-optical on-chip readout, paving the way toward large-format, low-noise infrared sensing arrays.

physics.optics↗

arXiv2025

Phononic Combs in Lithium Niobate Acoustic Resonators

Frequency combs consist of a spectrum of evenly spaced spectral lines. Optical frequency combs enable technologies ranging from timing, LiDAR, and ultra-stable signal sources. Microwave frequency combs are analogous to optical frequency combs, but often leverage electronic nonlinearity for comb generation. Generating microwave frequency combs using piezoelectric mechanical resonators would enable this behavior in a more compact form factor, thanks to the shorter acoustic wavelengths. In this work, we demonstrate a microwave frequency comb leveraging thermal nonlinearity in high quality factor ($Q$) overmoded acoustic resonators in thin film lithium niobate. By providing input power at 257 MHz, which is the sum frequency of two acoustic modes at 86 MHz and 171 MHz, we generate parametric down conversion and comb generation. We explore the nonlinear mixing regimes and the associated conditions for comb generation. Comb spacing is observed to vary significantly with drive frequency and power, and its general behavior is found to rely heavily on initial conditions. This demonstration showcases the potential for further improvement in compact and efficient microwave frequency combs, leveraging nonlinear acoustic resonators.

physics.app-ph↗

arXiv2025

An 11.7-GHz ScAlN FBAR Filter: Case Study on Scaling Limits and Challenges

This paper reports an 11.7 GHz compact 50 ohm ladder filter based on single layer Scandium Aluminum Nitride (ScAlN) film bulk acoustic resonators (FBARs) with platinum (Pt) electrodes, and uses it as a quantitative case study of the limits encountered when directly scaling to higher frequencies. The measured filter achieves a 3 dB fractional bandwidth (FBW) of 4.0% and an out of band rejection greater than 23.1 dB, with a minimum insertion loss (IL) of 6.8 dB. We analyze the origin of this performance through a quantitative framework: (1) a loss decomposition study, (2) frequency shift sensitivity that explains the discrepancy between simulated and measured center frequency, (3) FBW sensitivity to series shunt separation and port impedance, and (4) stress limited aperture that constrains device size. The results establish a realistic, fabricable baseline for directly scaled single layer ScAlN FBAR filters and outline materials, electrode, and stress management directions toward lower loss mmWave acoustic filters.

physics.app-ph↗

arXiv2025

Periodically Poled Piezoelectric Lithium Niobate Resonator for Piezoelectric Power Conversion

As the demand for compact and efficient power conversion systems increases, piezoelectric power converters have gained attention for their ability to replace bulky magnetic inductors with acoustic resonators, enabling higher power density and improved efficiency. Achieving optimal converter performance requires resonators with high quality factor ($Q$), strong electromechanical coupling ($k^2$), high power handling capability, and a spurious-free response. Lithium niobate (LN) has emerged as a promising material in this context due to its high figure of merit (FoM = $Q \cdot k^2$). While previous studies on single-layer LN resonators have demonstrated high FoM values, they typically operate at relatively low resonance frequencies ($f_s$). Recently, periodically poled piezoelectric film (P3F) structures, formed by stacking piezoelectric layers with alternating crystal orientations, have shown the potential to both scale up the operating frequency and enhance the FoM compared to single-layer counterparts in piezoelectric power conversion. This work presents the first P3F thickness-extensional (TE) LN resonator for power conversion, operating at 19.23 MHz, with a large \textit{$k^2$} of 29\% and a high \textit{Q} of 3187, achieving a state-of-the-art (\textit{ $f_s \cdot Q$}) product among piezoelectric power resonators. A high-power testing procedure is performed to systematically study the nonlinear behavior and power handling of P3F LN for power applications. With further optimization, P3F TE resonators have the potential to open up a new design space for high-power and high-frequency power conversion.

physics.app-ph↗

arXiv2025

50 GHz Piezoelectric Acoustic Filter

This paper presents significant frequency scaling of acoustic filter technology to 50 GHz. This achievement is enabled by the P3F LiNbO3 multilayer stack, in which piezoelectric thin-films of alternating orientations are transferred in sequence, thereby allowing efficient exploitation of high-order modes with high quality factor (Q) and coupling coefficient (k2) in a thicker piezoelectric stack. The demonstrated filter is comprised of twelfth-order symmetric (S12) mode lateral-field-excited bulk acoustic wave resonators (XBARs), built on a 4-layer periodically poled piezoelectric (P3F) 128 Y-cut lithium niobate (LiNbO3) stack. The filter exhibits 3.3 dB insertion loss (IL) and a fractional bandwidth (FBW) of 2.9%. The miniature design, with a footprint of 0.36 mm2, makes it promising for future wireless front-end applications. These results represent the highest frequency acoustic filters reported to date, setting a new benchmark in piezoelectric filter technology. Upon further development, the platform could enable filters further into the FR2 range, essential for next-generation communication systems.

eess.SP↗

arXiv2025

19.3 GHz Acoustic Filter with High Close-in Rejection in Tri-layer Thin-Film Lithium Niobate

Acoustic filters are preferred front-end solutions at sub-6 GHz due to their superior frequency selectivity compared to electromagnetic (EM) counterparts. With the ongoing development of 5G and the evolution toward 6G, there is a growing need to extend acoustic filter technologies into frequency range 3 (FR3), which spans 7 to 24 GHz to accommodate emerging high-frequency bands. However, scaling acoustic filters beyond 10 GHz presents significant challenges, as conventional platforms suffer from increased insertion loss (IL) and degraded out-of-band (OoB) rejection at higher frequencies. Recent innovations have led to the emergence of periodically poled piezoelectric lithium niobate (P3F LN) laterally excited bulk acoustic resonators (XBARs), offering low-loss and high electromechanical coupling performance above 10 GHz. This work presents the first tri-layer P3F LN filter operating at 19.3 GHz, achieving a low IL of 2.2 dB, a 3-dB fractional bandwidth (FBW) of 8.5%, and an impressive 49 dB close in rejection. These results demonstrate strong potential for integration into FR3 diplexers.

eess.SP↗

arXiv2025

Practical Demonstrations of FR3-Band Thin-Film Lithium Niobate Acoustic Filter Design

This article presents an approach to control the operating frequency and fractional bandwidth (FBW) of miniature acoustic filters in thin-film lithium niobate (TFLN). More specifically, we used first-order antisymmetric (A1) mode lateral-field-excited bulk acoustic wave resonators (XBARs) to achieve efficient operation at 20.5 GHz. Our technique leverages the thickness-dependent resonant frequency of A1 XBARs, combined with the in-plane anisotropic properties of 128$^\circ$ Y-cut TFLN, to customize filter characteristics. The implemented three-element ladder filter prototype achieves an insertion loss (IL) of only 1.79 dB and a controlled 3-dB FBW of 8.58% at 20.5 GHz, with an out-of-band (OoB) rejection greater than 14.9 dB across the entire FR3 band, while featuring a compact footprint of 0.90 $\times$ 0.74 mm2. Moreover, an eight-element filter prototype shows an IL of 3.80 dB, an FBW of 6.12% at 22.0 GHz, and a high OoB rejection of 22.97 dB, demonstrating the potential for expanding to higher-order filters. As frequency allocation requirements become more stringent in future FR3 bands, our technique showcases promising capability in enabling compact and monolithic filter banks toward next-generation acoustic filters for 6G and beyond.

eess.SP↗

arXiv2025

Thin-film scandium aluminum nitride bulk acoustic resonator with high Q of 208 and K2 of 9.5% at 12.5 GHz

This work describes sputtered scandium aluminum nitride (ScAlN) thin-film bulk acoustic resonators (FBAR) at 12.5 GHz with high electromechanical coupling (k2) of 9.5% and quality factor (Q) of 208, resulting in a figure of merit (FoM, Qk2) of 19.8. ScAlN resonators employ a stack of 90 nm thick 20% Sc doping ScAlN piezoelectric film on the floating bottom 38 nm thick platinum (Pt) electrode to achieve low losses and high coupling toward centimeter wave (cmWave) frequency band operation. Three fabricated and FBARs are reported, show promising prospects of ScAlN-Pt stack towards cmWave front-end filters.

physics.app-ph↗

arXiv2025

High-Q Millimeter-Wave Acoustic Resonators in Thin-Film Lithium Niobate Using Higher-Order Antisymmetric Modes

This letter presents miniature millimeter wave (mmWave, above 30 GHz) acoustic resonators based on a single-layer thin-film lithium niobate (LN) platform. More specifically, we present high performance third-order antisymmetric (A3) mode laterally excited bulk acoustic resonators (XBAR). Compared to prior demonstrations, the proposed platform features a compact footprint due to a smaller lateral wavelength and aperture. We showcase an A3 mode device operating at 39.8 GHz with a high extracted electromechanical coupling (k^2) of 4%, a high 3-dB series resonance quality factor (Q_s) of 97, and a high 3-dB anti-resonance quality factor (Q_p) of 342, leading to a figure of merit (FoM=k^2*Q_p) of 13.7 with a footprint of 32x44 micron^2. To demonstrate frequency scalability, the piezoelectric film thickness is varied while keeping the device layout. As a result, we present a multitude of high-performance devices covering a wide frequency range of 30-50 GHz, validating the proposed XBAR design at mmWave.

physics.app-ph↗

arXiv2025

Ku-Band AlScn-On-Diamond SAW Resonators with Phase Velocity above 8600 m/s

In this work, an Aluminum Scandium Nitride (AlScN) on Diamond Sezawa-mode surface acoustic wave (SAW) platform for RF filtering at Ku-band (12-18 GHz) is demonstrated. Thanks to the high acoustic velocity and low-loss diamond substrate, the prototype resonator at 12.9 GHz achieves a high phase velocity ($v_p$) of 8671 m/s, a maximum Bode-$Q$ of 408, and coupling coefficient ($k_{\mathrm{eff}}^2$) of 2.1%, outperforming high-velocity substrates such as SiC and sapphire by more than 20% in velocity. Resonators spanning 8-18 GHz are presented. The platform's high power handling above 12.5 dBm is also experimentally validated.

eess.SP↗

arXiv2025

Acoustic resonators above 100 GHz

Piezoelectric resonators are a common building block for signal processing because of their miniature size, low insertion loss, and high quality factor. As consumer electronics push to millimeter waves frequencies, designers must increase the operating frequency of the resonator. The current state-of-the-art approach to increase the operating frequency is to decrease the thickness of the piezoelectric film to shorten the acoustic wavelength or to use higher order modes. Unfortunately, maintaining high crystal quality typically requires thicker piezoelectric layers. Thinner layers suffer from higher defect densities and increased surface damping, which degrade the electromechanical coupling and quality factor. While acoustic high order modes can also increase operating frequency, the electromechanical coupling rapidly decreases with increasing mode number. Here, we overcome these limitations by utilizing a piezoelectric stack of three layers of lithium niobate with alternating crystallographic orientations to preferentially support higher order modes and thereby enhance the electromechanical coupling without degrading the quality factor. Our approach improves the figure of merit of millimeter-wave acoustic resonators by roughly an order of magnitude greater compared to state-of-the-art piezoelectric resonators above 60 GHz. This concept of alternating crystallographic orientations facilitates a new path to develop millimeter wave resonators with high figures of merit, low insertion loss, and miniature footprints, enabling new applications in millimeter wave signal processing and computing.

physics.app-ph↗

arXiv2024

Low-Loss Higher-Order Cross-Sectional Lam\'e Mode SAW Devices in 10-20 GHz Range

This paper presents surface acoustic wave (SAW) acoustic delay lines (ADL) for studying propagation loss mechanisms in Lithium Niobate (LN). Devices were fabricated by depositing 50 nm aluminum patterns on 600 nm X-Cut LN on amorphous silicon on silicon carbide, where longitudinally dominant SAW was targeted. Upon fabrication, higher-order thickness-based cross-sectional Lam\'e modes and Rayleigh modes were studied for their Q factors using acoustic delay lines. Utilizing bi-directional electrodes, ADL with lateral lambda values ranging from 0.4 um to 0.6 um were measured. Higher order Lame modes were found to have consistently higher Q factors than their Rayleigh mode counterpart, on the order of 1000-3000, showing high-frequency SAW devices as still viable candidates for frequency scaling without a substantial increase in loss.

physics.app-ph↗

arXiv2024

18 GHz Solidly Mounted Resonator in Scandium Aluminum Nitride on SiO2/Ta2O5 Bragg Reflector

This work reports an acoustic solidly mounted resonator (SMR) at 18.64 GHz, among the highest operating frequencies reported. The device is built in scandium aluminum nitride (ScAlN) on top of silicon dioxide (SiO2) and tantalum pentoxide (Ta2O5) Bragg reflectors on silicon (Si) wafer. The stack is analyzed with X-ray reflectivity (XRR) and high-resolution X-ray diffraction (HRXRD). The resonator shows a coupling coefficient (k2) of 2.0%, high series quality factor (Qs) of 156, shunt quality factor (Qp) of 142, and maximum Bode quality factor (Qmax) of 210. The third-order harmonics at 59.64 GHz is also observed with k2 around 0.6% and Q around 40. Upon further development, the reported acoustic resonator platform can enable various front-end signal-processing functions, e.g., filters and oscillators, at future frequency range 3 (FR3) bands.

physics.app-ph↗

arXiv2024

Acoustic and Electromagnetic Co-Modeling of Piezoelectric Devices at Millimeter Wave

This work reports the procedure for modeling piezoelectric acoustic resonators and filters at millimeter wave (mmWave). Different from conventional methods for lower frequency piezoelectric devices, we include both acoustic and electromagnetic (EM) effects, e.g., self-inductance, in both the circuit-level fitting and finite element analysis, toward higher accuracy at higher frequencies. To validate the method, thin-film lithium niobate (LiNbO3) first-order antisymmetric (A1) mode devices are used as the testbed, achieving great agreement for both the standalone resonators and a fifth-order ladder filter. Upon further development, the reported acoustic and EM co-modeling could guide the future design of compact piezoelectric devices at mmWave and beyond.

physics.app-ph↗

arXiv2024

Ultra-Wideband Tapered Transducers in Thin-Film Lithium Niobate on Silicon Carbide

Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard limit using typical transducer designs. In this work, we present an ultra-wideband transducer design utilizing a tapered electrode configuration to overcome this limitation. The design is realized on a lithium niobate (LN) on silicon carbide platform, utilizing a combination of first and higher order shear-horizontal modes to generate the ultra-wideband response. The implementation shows a fractional bandwidth (FBW) of 55% at 2.23 GHz with an associated insertion loss (IL) of 26 dB for the measured 50 ohm case. Upon improved impedance matching, this performance could be improved to 79% FBW and an IL of 16.5 dB. Upon further development, this ultra-wideband design could be reasonably scaled towards improved FBW and IL trade off to enable improved usability for cases where bandwidth should be prioritized.

physics.app-ph↗

arXiv2024

2 to 16 GHz Fundamental Symmetric Mode Acoustic Resonators in Piezoelectric Thin-Film Lithium Niobate

As 5G connectivity proliferates, signal processing applications at 6G centimeter bands have gained attention for urban wireless capacity expansion. At sub-5 GHz, acoustic resonators operating in the fundamental symmetric (S0) Lamb mode hold significant promise if frequency scaled to the 6G centimeter bands. Concurrently, the lateral wavelength dependency and the traveling wave nature of S0 mode enable monolithic multi-frequency fabrication, transversal filters, correlators, and other compact signal processing components. In this work, we present thin-film lithium niobate (LN) S0 resonators scaled up to 16 GHz. Specifically, we study the characteristics of the S0 mode as the wavelength is minimized and showcase a device at 14.9 GHz with a Bode Q maximum of 391, a k2 of 6%, and a figure of merit (FoM) of 23.33, surpassing the state-of-the-art (SoA) in its frequency range.

physics.app-ph↗