arXiv subjects

Eva Monroy

Publications and source records attributed to Eva Monroy.

At least 19 recordsLinked to original sources

arXiv2026

Roadmap on UV-C photodetectors: materials, applications and industry perspectives

UV-C photodetectors are poised to play an increasingly important role in future photonic technologies, driven by the rapid emergence of UV-C light sources and new wide bandgap semiconductors. These advances are enabling new levels of spectral selectivity, radiation hardness, sensitivity, and device integration, while opening opportunities across a broad range of applications. This roadmap provides a comprehensive overview of the current landscape of UV-C photodetection, spanning established and emerging material platforms (Ga2O3, AlGaN, BN, diamond, MgZnO, 2-dimensional materials, metal halide perovskites, micro-electromechanical systems), and their applications in metrology, astronomy, communications, environmental monitoring, fire detection, missile warning, gas sensing, and medical diagnostics. By identifying opportunities, bottlenecks, and future directions, this roadmap aims to support both newcomers and established researchers, with the aim of accelerating the translation of UV-C photodetectors into impactful technologies.

physics.app-ph↗

arXiv2026

Growth and Morphology of InN Nanowires on Si<111> and Si<100> at Back-End-Of-Line Compatible Temperatures

InN nanowires were grown on Si<111> and Si<100> substrates by plasma-assisted molecular beam epitaxy using a thin AlN buffer layer at temperatures compatible with the thermal budget limitation imposed by Back-End-Of-Line processing. Reflection high-energy electron diffraction reveals different nucleation behaviors on the two substrate orientations, with higher structural disorder in the case of Si<100>. However, vertically aligned nanowires with hexagonal cross section and N polarity are obtained on both substrates. A statistical analysis of nanowire morphology as a function of growth temperature indicates similar trends in diameter, density, and length on Si<111> and Si<100>, which are explained by adatom kinetics during growth. Nanowires on Si<100> exhibit improved uniformity and reduced tapering, attributed to the different nanowire nucleation due to microstructural properties of the AlN buffer layer. The results demonstrate the feasibility of growing high-quality InN nanowires on Si<100>, supporting their potential for monolithic integration of nanowire-based photodetectors on silicon.

cond-mat.mtrl-sci↗

arXiv2025

Impact of electron beam propagation on high-resolution quantitative chemical analysis of 1 nm-wide GaN/AlGaN quantum wells

Recent advancements in high-resolution spectroscopy analyses within the scanning transmission electron microscope (STEM) have paved the way for measuring the concentration of chemical species in crystalline materials at the atomic scale. However, several artifacts complicate the direct interpretation of experimental data. For instance, in the case of energy dispersive x-ray (EDX) spectroscopy, the linear dependency of local x-ray emission on composition is disrupted by channeling effects and cross-talk during electron beam propagation. To address these challenges, it becomes necessary to adopt an approach that combines experimental data with inelastic scattering simulations. This method aims to account for the effects of electron beam propagation on x-ray emission, essentially determining the quantity and the spatial origin of the collected signal. In this publication, we propose to assess the precision and sensitivity limits of this approach in a practical case study involving a focused ion beam (FIB)-prepared III-N multilayers device. The device features nominally pure ~1.5-nm wide GaN quantum wells surrounded by AlGaN barriers containing a low concentration of aluminum (~5 at. %). By employing atomic-scale EDX acquisitions based on the averaging of more than several thousand frames, calibrated $\zeta$-factors combined with a multi-layer x-ray absorption correction model for quantification, and by comparing the x-ray radiation obtained from the quantum well with a reference 10-nm thick structure, we demonstrate that the quantitative impact of beam propagation on chemical composition can be precisely accounted for, resulting in a composition sensitivity at the atomic scale as low as +-0.25 at.%. Finally, practical aspects to achieve this high precision level are discussed, particularly in terms of inelastic multislice simulation, uncertainty determination, and sample quality.

cond-mat.mtrl-sci↗

arXiv2024

Polarization spontaneous and piezo: fundamentals and their implementation in ab initio calculations

Fundamental properties of spontaneous and piezo polarization are reformulated and critically reviewed. It was demonstrated that Landau definition of polarization as a dipole density could be used to the infinite systems. The difference between the bulk polarization and surface polarity are distinguished thus creating clear identification of both components. The local model of spontaneous polarization was created and used to calculate spontaneous polarization as the electric dipole density. It was shown that the proposed local model correctly predicts c-axis spontaneous polarization values of the nitride wurtzite semiconductors. It was also shown that the proposed model predicts zero polarization in the plane perpendicular to the c-axis, in accordance with symmetry requirements. In addition, the model results are in accordance with polarization equal to zero for zinc blende lattice. These data confirm the basic correctness of the proposed model. The spontaneous polarization values obtained for all wurtzite III nitrides (BN, AlN, GaN and InN) are in basic agreement with the earlier calculations using Berry phase and slab models of Bernardini et al. {Bernardini et al. Phys Rev B 56 (2001) R10024 & 63 (2001) 193201} but not with Dreyer et al. {Dreyer et al. Phys. Rev X 6 (2016) 021038}. Wurtzite nitride superlattices ab initio calculations were performed to derive polarization-induced fields in the coherently strained lattices showing good agreement with the polarization values. The strained superlattice data were used to determine the piezoelectric parameters of wurtzite nitrides obtaining the values that were in basic agreement with the earlier data. Zinc blende superlattices were also modeled using ab initio calculations showing results that are in agreement with the absence of polarization of all nitrides in zinc blende symmetry.

cond-mat.mtrl-sci↗

arXiv2023

Coulomb contribution to Shockley-Read-Hall (SRH) recombination

Defect-mediated nonradiative recombination, known as Shockley-Read-Hall (SRH) recombination is reformulated. The introduced model considers Coulomb attraction between charged deep defect and the approaching free carrier, showing that this effect may cause considerable increase of the carrier velocity approaching the recombination center. The effect considerably increases the carrier capture rates. It is demonstrated that in the typical semiconductor device or semiconductor medium, the SRH recombination cannot be neglected at low temperatures. The SRH is more effective in the case of low doped semiconductors. Effective screening by mobile carrier density could reduce the effect, leading to SRH rate increase.

cond-mat.mtrl-sci↗

arXiv2023

Effect of extended defects on AlGaN QDs for electron-pumped UV-emitters

We study the origin of bimodal emission in AlGaN/AlN QD superlattices displaying high internal quantum efficiency (around 50%) in the 230-300 nm spectral range. The secondary emission at longer wavelengths is linked to the presence of cone-like defects starting at the first AlN buffer/superlattice interface and propagating vertically. These defects are associated with a dislocation that produces strong shear strain, which favors the formation of 30{\deg} faceted pits. The cone-like structures present Ga enrichment at the boundary facets and larger QDs within the defect. The bimodality is attributed to the differing dot size/composition within the defects and at the defect boundaries, which is confirmed by the correlation of microscopy results and Schr\"odinger-Poisson calculations.

physics.app-ph↗

arXiv2023

AlGaN/AlN Stranski-Krastanov quantum dots for highly efficient electron beam pumped emitters: The role of miniaturization and composition to attain far UV-C emission

Conventional ultraviolet (UV) lamps for disinfection emit radiation in the 255-270 nm range, which poses a high risk of causing cancer and cataracts. To address these concerns, solid-state far UV-C sources emitting below 240 nm are gaining attention as a safe and sustainable disinfection solution for occupied spaces. Here, we delve into the extension of the AlxGa1-xN/AlN quantum dot (QD) technology towards the far UV-C range, which presents various challenges associated with the reduction of the lattice mismatch and band offset when Al is incorporated in the QDs. We explore the structural and optical impact of increasing the Al content through the increase of the Al flux and eventual correction of the Ga flux to maintain a constant metal/N ratio. We also examine the impact of extreme miniaturization of the QDs, achieved through a reduction of their growth time, on the spectral behavior and internal quantum efficiency (IQE). The high Al content results in QDs with a reduced aspect ratio (height/diameter) and thicker wetting layer when compared to the GaN/AlN system. Self-assembled QDs grown with a metal/N ratio ranging from 0.5 to 0.8 show an IQE around 50%, independent of the Al content (up to 65%) or emission wavelength (300-230 nm). However, samples emitting at wavelengths below 270 nm exhibit a bimodal luminescence associated with inhomogeneous in-plane emission attributed to fluctuations of the QD shape associated with extended defects. Reducing the QD size exacerbates the bimodality without reducing the emission wavelength. The power efficiencies under electron beam pumping range from 0.4% to 1%, with clear potential for improvement through surface treatments that enhance light extraction efficiency.

physics.app-ph↗

arXiv2022

Assessment of active dopants and p-n junction abruptness using in-situ biased 4D-STEM

A key issue in the development of high-performance semiconductor devices is the ability to properly measure active dopants at the nanometer scale. 4D scanning transmission electron microscopy and off-axis electron holography have opened up the possibility of studying the electrostatic properties of a p-n junction with nm-scale spatial resolution. The complete description of a p-n junction must take into account the precise evolution of the concentration of dopants around the junction, since the sharpness of the dopant transition directly influences the built-in potential and the maximum electric field. Here, a contacted silicon p-n junction is studied through in-situ biased 4D-STEM. Measurements of electric field, built-in voltage, depletion region width and charge density in the space charge region are combined with analytical equations as well as finite-element simulations in order to evaluate the quality of the junction interface. The nominally-symmetric, highly doped ($N_A = N_D = 9\space x \space10^{18} cm^{-3}$) junction presents an electric field and built-in voltage much lower than expected for an abrupt junction. These experimental results are consistent with electron holography data. All measured junction parameters are compatible with the presence of an intermediate region with a graded profile of the dopants at the p-n interface. This hypothesis is also consistent with the evolution of the electric field with bias. These results demonstrate that in-situ biased 4D-STEM enables a better understanding of the electrical properties of semiconductor p-n junctions with nm-scale resolution.

physics.app-ph↗

arXiv2022

Reduction of the lasing threshold in optically pumped AlGaN/GaN lasers with two-step etched facets

We report a two-step process to obtain smooth and vertical {10-10} m-plane facets in AlGaN/GaN separate confinement heterostructures designed to fabricate UV lasers emitting at 355 nm. The process consists in a dry etching by RIE-ICP combined with a crystallographic-selective wet etching process using a KOH-based solution. The anisotropy in the wet etching rates between the different crystallographic planes of the AlGaN structure, allows the fabrication of flat and parallel facets without a degradation of the multilayered ensemble. The optical performance of the lasers display a major improved when using the two-step process for the definition of the cavity, in comparison to cavities fabricated by mechanical cleaving, with the lasing threshold under optical pumping being reduced to almost half.

physics.optics↗

arXiv2021

Decorrelation of internal quantum efficiency and lasing threshold in AlGaN-based separate confinement heterostructures for UV emission

In this paper, we study the internal quantum efficiency and lasing threshold of AlGaN/GaN separate confinement heterostructures designed for ultraviolet laser emission. We discuss the effect of carrier localization and carrier diffusion on the optical performance. The implementation of graded index separate confinement heterostructures results in an improved carrier collection at the multi-quantum well, which facilitates population inversion and reduces the lasing threshold. However, this improvement is not correlated with the internal quantum efficiency of the spontaneous emission. We show that carrier localization at alloy inhomogeneities results in an enhancement of the radiative efficiency but does not reduce the laser threshold, more sensitive to the carrier injection efficiency.

physics.app-ph↗

arXiv2021

Optical net gain measurement on Al$_{0.07}$Ga$_{0.93}$N/GaN multi-quantum well

We present net gain measurements at room temperature in Al$_{0.07}$Ga$_{0.93}$N/GaN 10-period multi-quantum well emitting at 367 nm, using the variable stripe length method. Measurements were conducted at two different positions on the sample, where the net gain threshold was attained at 218 kW/cm$^{2}$ and 403 kW/cm$^{2}$. At the position with higher threshold, we observed an anomalous amplification of the photoluminescence intensity that occurs for long stripe lengths (superior to 400 $\mu$m) and high pumping power (superior to 550 kW/cm$^{2}$), leading to an overestimation of the gain value. We attribute such a phenomenon to the feedback provided by the reflection from cracks, which were created during the epitaxial growth due to the strong lattice mismatch between different layers. The highest gain value without anomalous amplification was 131 cm$^{-1}$, obtained at the maximum pumping power density of the experimental setup (743 kW/cm$^{2}$). Using the intrinsic efficiency limit of the cathodoluminescence process, we estimate a lower limit for electron beam pumped laser threshold at room temperature of 390 kW/cm$^{2}$ for this multi-quantum well structure.

cond-mat.mtrl-sci↗

arXiv2021

Polarization doping ab initio verification of the concept charge conservation and nonlocality

In this work, we study the emergence of polarization doping in AlxGa1-xN layers with graded composition from a theoretical viewpoint. We demonstrate that the charge conservation law applies for fixed and mobile charges separately, leading to nonlocal compensation phenomena involving bulk fixed and mobile charge and polarization sheet charge at the heterointerfaces. The magnitude of the effect allows obtaining technically viable mobile charge density for optoelectronic devices without impurity doping (donors or acceptors). Therefore, it provides an additional tool for the device designer, with the potential to attain high conductivities: high carrier concentrations can be obtained even in materials with high dopant ionization energies, and the mobility is not limited by scattering at ionized impurities.

cond-mat.mtrl-sci↗

arXiv2021

AlGaN/GaN asymmetric graded-index separate confinement heterostructures designed for electron-beam pumped UV lasers

We present a study of undoped AlGaN/GaN separate confinement heterostructures designed to operate as electron beam pumped ultraviolet lasers. We discuss the effect of spontaneous and piezoelectric polarization on carrier diffusion, comparing the results of cathodoluminescence with electronic simulations of the band structure and Monte Carlo calculations of the electron trajectories. Carrier collection is significantly improved using an asymmetric graded-index separate confinement heterostructure (GRINSCH). The graded layers avoid potential barriers induced by polarization differences in the heterostructure and serve as strain transition buffers which reduce the mosaicity of the active region and the linewidth of spontaneous emission.

physics.optics↗

arXiv2020

Correlated electro-optical and structural study of electrically tunable nanowire quantum dot emitters

Quantum dots inserted in semiconducting nanowires are a promising platform for the fabrication of single photon devices. However, it is difficult to fully comprehend the electro-optical behaviour of such quantum objects without correlated studies of the structural and optical properties on the same nanowire. In this work, we study the spectral tunability of the emission of a single quantum dot in a GaN nanowire by applying external bias. The nanowires are dispersed and contacted on electron beam transparent Si3N4 membranes, so that transmission electron microscopy observations, photocurrent and micro-photoluminescence measurements under bias can be performed on the same specimen. The emission from a single dot blue or red shifts when the external electric field compensates or enhances the internal electric field generated by the spontaneous and piezoelectric polarization. A detailed study of two nanowire specimens emitting at 327.5 nm and 307.5 nm shows spectral shifts at rates of 20 and 12 meV/V, respectively. Theoretical calculations facilitated by the modelling of the

cond-mat.mes-hall↗

arXiv2020

Correlated and in-situ electrical transmission electron microscopy studies and related membrane fabrication

Understanding the interplay between the structure, composition and opto-electronic properties of semiconductor nano-objects requires combining transmission electron microscopy (TEM) based techniques with electrical and optical measurements on the very same specimen. Recent developments in TEM technologies allow not only the identification and in-situ electrical characterization of a particular object, but also the direct visualization of its modification in-situ by techniques such as Joule heating. Over the past years, we have carried out a number of studies in these fields that are reviewed in this contribution. In particular, we discuss here i) correlated studies where the same unique object is characterized electro-optically and by TEM, ii) in-situ Joule heating studies where a solid-state metal-semiconductor reaction is monitored in the TEM, and iii) in-situ biasing studies to better understand the electrical properties of contacted single nanowires. In addition, we provide detailed fabrication steps for the silicon nitride membranes crucial to these correlated and in-situ measurements.

physics.app-ph↗

arXiv2019

Effect of the nanowire diameter on the linearity of the response of GaN-based heterostructured nanowire photodetectors

Nanowire photodetectors are investigated because of their compatibility with flexible electronics, or for the implementation of on-chip optical interconnects. Such devices are characterized by ultrahigh photocurrent gain, but their photoresponse scales sublinearly with the optical power. Here, we present a study of single-nanowire photodetectors displaying a linear response to ultraviolet illumination. Their structure consists of a GaN nanowire incorporating an AlN/GaN/AlN heterostructure, which generates an internal electric field. The activity of the heterostructure is confirmed by the rectifying behavior of the current-voltage characteristics in the dark, as well as by the asymmetry of the photoresponse in magnitude and linearity. Under reverse bias (negative bias on the GaN cap segment), the detectors behave linearly with the impinging optical power when the nanowire diameter is below a certain threshold ($\approx$ 80 nm), which corresponds to the total depletion of the nanowire stem due to the Fermi level pinning at the sidewalls. In the case of nanowires that are only partially depleted, their nonlinearity is explained by a nonlinear variation of the diameter of their central conducting channel under illumination.

cond-mat.mes-hall↗

arXiv2019

Nanowire photodetectors based on wurtzite semiconductor heterostructures

Using nanowires for photodetection constitutes an opportunity to enhance the absorption efficiency while reducing the electrical cross-section of the device. They present interesting features like compatibility with silicon substrates, which offers the possibility of integrating detector and readout circuitry, and facilitates their transfer to flexible substrates. Within a nanowire, it is possible to implement axial and radial (core-shell) heterostructures. These two types can be combined to obtain three-dimensional carrier confinement (dot-in-a-wire). The incorporation of heterostructures in nanowire photodetectors opens interesting opportunities of application and performance improvement. Heterojunctions or type-II heterostructures favor the separation of the photogenerated electrons and holes, and the implementation of quantum dots in a nanowire can be applied to the development of quantum photodetectors. This paper provides a general review of latest progresses in nanowire photodetectors, including single nanowires and heterostructured nanowires.

cond-mat.mtrl-sci↗

arXiv2019

Effect of Ge-doping on the short-wave, mid- and far-infrared intersubband transitions in GaN/AlGaN heterostructures

This paper assesses the effects of Ge-doping on the structural and optical (band-to-band and intersubband (ISB)) properties of GaN/AlGaN multi-quantum wells (QWs) designed to display ISB absorption in the short-wave, mid- and far-infrared ranges (SWIR, MIR, and FIR, respectively). The standard c-plane crystallographic orientation is considered for wells absorbing in the SWIR and MIR spectral regions, whereas the FIR structures are grown along the nonpolar m-axis. In all cases, we compare the characteristics of Ge-doped and Si-doped samples with the same design and various doping levels. The use of Ge appears to improve the mosaicity of the highly lattice-mismatched GaN/AlN heterostructures. However, when reducing the lattice mismatch, the mosaicity is rather determined by the substrate and does not show any dependence on the dopant nature or concentration. From the optical point of view, by increasing the dopant density, we observe a blueshift of the photoluminescence in polar samples due to the screening of the internal electric field by free carriers. In the ISB absorption, on the other hand, there is a systematic improvement of the linewidth when using Ge as a dopant for high doping levels, whatever the spectral region under consideration (i.e. different QW size, barrier composition and crystallographic orientation).

physics.app-ph↗