arXiv subjects

Deep Jariwala

Publications and source records attributed to Deep Jariwala.

At least 37 records · Page 2Linked to original sources

arXiv2025

Write Cycling Endurance Exceeding 1010 in Sub-50 nm Ferroelectric AlScN

Wurtzite ferroelectrics, particularly aluminum scandium nitride (AlScN), have emerged as a promising materials platform for nonvolatile memories, offering high polarization values exceeding 100 uC/cm2. However, their high coercive fields (>3 MV/cm) have limited cycling endurance to ~107 cycles in previous reports. Here, we demonstrate unprecedented control of polarization switching in AlScN, achieving write cycling endurance exceeding 1010 cycles a thousand fold improvement over previous wurtzite ferroelectric benchmarks. Through precise voltage modulation in 45 nm thick Al0.64Sc0.36N capacitors, we show that while complete polarization reversal (2Pr ~ 200 uC/cm2) sustains ~108 cycles, partial switching extends endurance beyond 1010 cycles while maintaining a substantial polarization (>30 uC/cm2 for 2Pr). This exceptional endurance, combined with breakdown fields approaching 10 MV/cm in optimized 10 um diameter devices, represents the highest reported values for any wurtzite ferroelectric. Our findings establish a new paradigm for reliability in nitride ferroelectrics, demonstrating that controlled partial polarization and size scaling enables both high endurance and energy efficient operation.

cond-mat.mtrl-sci↗

arXiv2025

Roadmap for Photonics with 2D Materials

Triggered by the development of exfoliation and the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals currently constitute a wide research field protruding in multiple directions in combination with layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary collection of those directions, where 2D materials contribute with polaritons of unique characteristics such as strong spatial confinement, large optical-field enhancement, long lifetimes, high sensitivity to external stimuli (e.g., electric and magnetic fields, heating, and strain), a broad spectral range from the far infrared to the ultraviolet, and hybridization with spin and momentum textures of electronic band structures. The explosion of photonics with 2D materials as a vibrant research area is producing breakthroughs, including the discovery and design of new materials and metasurfaces with unprecedented properties as well as applications in integrated photonics, light emission, optical sensing, and exciting prospects for applications in quantum information, and nanoscale thermal transport. This Roadmap summarizes the state of the art in the field, identifies challenges and opportunities, and discusses future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

cond-mat.mtrl-sci↗

arXiv2025

Low-voltage Ferroelectric Field-Effect Transistors with Ultrathin Aluminum Scandium Nitride and 2D channels

The continued evolution of CMOS technology demands materials and architectures that emphasize low power consumption, particularly for computations involving large scale data processing and multivariable optimization. Ferroelectric materials offer promising solutions through enabling dual-purpose memory units capable of performing both storage and logic operations. In this study, we demonstrate ferroelectric field effect transistors (FeFETs) with MoS2 monolayer channels fabricated on ultrathin 5 nm and 10 nm ferroelectric Aluminum Scandium Nitride (AlScN) films. By decreasing the thickness of the ferroelectric film, we achieve significantly reduced gate voltages (<3V) required to switch the conductance of the devices, enabling operation at low voltages compatible with advanced CMOS. We observe a characteristic crossover in hysteresis behavior that varies with film thickness, channel fabrication method, and environmental conditions. Through systematic investigation of multiple parameters including channel fabrication methods, dimensional scaling, and environmental effects, we provide pathways to improve device performance. While our devices demonstrate clear ferroelectric switching behavior, further optimization is required to enhance the ON/OFF ratio at zero gate voltage while continuing to reduce the coercive field of these ultrathin films.

physics.app-ph↗

arXiv2025

Can a ferroelectric diode be a selector-less, universal, non-volatile memory?

Recent advances in silicon foundry-process compatible ferroelectric (FE) thin films have reinvigorated interest in FE-based non-volatile memory (NVM) devices. Ferroelectric diodes (FeDs) are two-terminal NVM devices exhibiting rectifying current-voltage hysteretic characteristics that enable self-selecting designs critical for high-density memory. We examine progress in FeDs based on CMOS-compatible HZO, AlScN, and emerging van der Waals ferroelectrics. While FeDs demonstrate promising ON/OFF ratios and rectification capabilities, they face persistent challenges including limited write-cycling endurance, elevated operating voltages, and insufficient read currents. We provide materials-focused strategies to enhance reliability and performance of FeDs for energy-efficient electronic memory applications, with emphasis on their unique self-rectifying capabilities that eliminate the need for selector elements in crossbar arrays for compute in memory applications.

cond-mat.mtrl-sci↗

arXiv2025

Observation of giant remnant polarization in ultrathin AlScN at cryogenic temperatures

The discovery of wurtzite ferroelectrics opens new frontiers in polar materials, yet their behavior at cryogenic temperatures remains unexplored. Here, we reveal unprecedented ferroelectric properties in ultrathin (10 nm) Al$_{0.68}$Sc$_{0.32}$N (AlScN) at cryogenic temperatures where the properties are fundamentally distinct from those of conventional oxide ferroelectrics. At 12 K, we demonstrate a giant remnant polarization exceeding 250 $μ$C/cm$^2$ -- more than twice that of any known ferroelectric -- driven by an enhanced c/a ratio in the wurtzite structure. Our devices sustain remarkably high electric fields (~13 MV/cm) while maintaining reliable switching, achieving over 104 polarization reversal cycles at 12 K. Critically, this breakdown field strength approaches that of passive dielectric materials while maintaining ferroelectric functionality. The extraordinary polarization enhancement and high-field stability at cryogenic temperatures contrasts sharply with oxide ferroelectrics, establishing wurtzite ferroelectrics as a distinct class of polar materials with implications spanning fundamental physics to cryogenic non-volatile memory and quantum technologies.

cond-mat.mtrl-sci↗

arXiv2025

High-Temperature-Resilient Hyperbolicity in a Mixed-Dimensional Superlattice

Hyperbolic superlattices are used for sub-wavelength focusing, cloaking, and optical thermal management. Typically, these superlattices are constructed of layers of noble metals and insulators. Despite these systems displaying excellent optical performance, the poor thermal stability of noble metals prevents their application in high-temperature environments. Instead, CMOS-compatible transition-metal nitrides are often substituted for noble metals in plasmonic systems since they have high thermal stability at the expense of optical properties. Here, we fabricate hyperbolic titanium nitride (TiN)/hexagonal boron nitride (hBN) superlattices with 3D-2D interfaces. The mixed-dimensional nature of the interfaces prevents atoms from diffusing across the interface at high temperatures. The hyperbolicity of the superlattice is found to be unaffected by annealing at high temperature (800 oC for 10 hrs), and TiN/hBN is found to have a larger hyperbolic figure of merit than similar superlattices.

physics.optics↗

arXiv2025

Al0.68Sc0.32N/SiC based metal-ferroelectric-semiconductor capacitors operating up to 1000 °C

Ferroelectric (Fe) materials-based devices show great promise for non-volatile memory applications, yet few demonstrate reliable operation at elevated temperatures. In this work, we demonstrate Ni/Al0.68Sc0.32N/4H-SiC metal-ferroelectric-semiconductor capacitors for high-temperature non-volatile memory applications. Our 30-nm thick ferroelectric Al0.68Sc0.32N film grown on SiC exhibits stable and robust ferroelectric switching up to 1000°C. The coercive field decreases linearly from -6.4/+11.9 MV cm-1 at room temperature to -3.1/+7.8 MV cm-1 at 800°C, further reducing to -2.5 MV cm-1 at 1000°C. At 600°C, the devices achieve remarkable reliability with ~2000 endurance cycles and over at least 100 hours of retention with negligible polarization loss. At 800°C, the devices retain data for at least 10,000 seconds and exceed 400 write cycles. Our results further highlight the potential for ferroelectric AlScN thin-films particularly when paired with SiC semiconductor substrates for high-temperature non-volatile memory.

cond-mat.mtrl-sci↗

arXiv2024

Reconfigurable SWCNT ferroelectric field-effect transistor arrays

Reconfigurable devices have garnered significant attention for alleviating the scaling requirements of conventional CMOS technology, as they require fewer components to construct circuits with similar function. Prior works required continuous voltage application for programming gate terminal(s) in addition to the primary gate terminal, which undermines the advantages of reconfigurable devices in realizing compact and power-efficient integrated circuits. Here, we realize reconfigurable devices based on a single-gate field-effect transistor (FET) architecture by integrating semiconducting channels consisting of a monolayer film of highly aligned SWCNTs with a ferroelectric AlScN gate dielectric, all compatible with CMOS back-end-of-line (BEOL) processing. We demonstrated these SWCNT ferroelectric FETs (FeFETs) in a centimeter-scale array (~1 cm^2) comprising ~735 devices, with high spatial uniformity in device characteristics across the array. The devices exhibited ambipolar transfer characteristics with high on-state currents and current on/off ratios exceeding 10^5, demonstrating an excellent balance between electron and hole conduction (~270 μA/μm at a drain voltage of 3 V. When functioning as a non-volatile memory, the SWCNT FeFETs demonstrated large memory windows of 0.26 V/nm and 0.08 V/nm in the hole and electron conduction regions, respectively, combined with excellent retention behavior for up to 10^4 s. Repeated reconfiguration between p-FET and n-FET modes was also enabled by switching the spontaneous polarization in AlScN and operating the transistor within a voltage range below the coercive voltage. We revealed through circuit simulations that reconfigurable SWCNT transistors can realize ternary content-addressable memory (TCAM) with far fewer devices compared to circuits based on silicon CMOS technology or based on resistive non-volatile devices.

cond-mat.mtrl-sci↗

arXiv2024

Effects of Self-Hybridized Exciton-Polaritons on WS2 Photovoltaics

Excitonic semiconductors such as transition metal dichalcogenides (TMDCs) are attractive for next-generation photovoltaics (PVs) with low cost, light weight, and low material consumption. In WS2 and other TMDCs, the simultaneous large optical constants and strong exciton resonance can result in the primary photogenerated species being self-hybridized exciton-polaritons emerging from the strong coupling of excitons and optical cavity modes formed by the WS2. We show that strong coupling can benefit photovoltaic performance, with external quantum efficiencies and power conversion efficiencies enhanced by an order of magnitude, approaching values of 55 and 2%, respectively. Thickness dependent device characterization is performed to study the polariton dispersion, revealing anomalous internal quantum efficiency and fill factor behavior that are attributed to polariton-modified exciton transport processes. Our results uncover a significant mechanism in the photoconversion process for PVs from high index, excitonic semiconductors and indicate the utility of strong coupling for optoelectronic devices.

physics.optics↗

arXiv2024

Reconfigurable Compute-In-Memory on Field-Programmable Ferroelectric Diodes

The deluge of sensors and data generating devices has driven a paradigm shift in modern computing from arithmetic-logic centric to data-centric processing. Data-centric processing require innovations at device level to enable novel compute-in-memory (CIM) operations. A key challenge in construction of CIM architectures is the conflicting trade-off between the performance and their flexibility for various essential data operations. Here, we present a transistor-free CIM architecture that permits storage, search and neural network operations on sub-50nm thick Aluminum Scandium Nitride ferroelectric diodes (FeDs). Our circuit designs and devices can be directly integrated on top of Silicon microprocessors in a scalable process. By leveraging the field-programmability, non-volatility and non-linearity of FeDs, search operations are demonstrated with a cell footprint < 0.12 um2 when projected onto 45-nm node technology. We further demonstrate neural network operations with 4-bit operation using FeDs. Our results highlight FeDs as candidates for efficient and multifunctional CIM platforms.

physics.app-ph↗

arXiv2024

Tandem Photovoltaics from 2D Transition Metal Dichalcogenides on Silicon

The demand for high-efficiency photovoltaic systems necessitates innovations that transcend the efficiency limitations of single-junction solar cells. This study investigates a tandem photovoltaic architecture comprising a top-cell with a transition metal dichalcogenide (TMDC) superlattice absorber and a bottom-cell of crystalline silicon (c-Si), focusing on optimizing the light absorption and electrical performance of the combined structure. Through the transfer matrix method and electrical simulations, we optimized the geometry of the superlattice, determining that a siz-layer MoSe2 configuration with a 40 nm SiO2 antireflective layer maximizes photon absorption while mitigating additional weight and preserving the cell's structural integrity. The results show that the optimized TMDC superlattice significantly improves the PCE of the tandem design to 28.96%, and increase of 5.68% over the original single-junction c-Si solar cell's efficiency. This advancement illustrates the potential of TMDC material in next-generation solar cells and presents a promising avenue for the development of highly efficient, tandem photovoltaic systems via van der Waals integration of the top cell on c-Si

physics.optics↗

arXiv2024

Materials for High Temperature Digital Electronics

Silicon microelectronics, consisting of complementary metal oxide semiconductor (CMOS) technology, have changed nearly all aspects of human life from communication to transportation, entertainment, and healthcare. Despite the widespread and mainstream use, current silicon-based devices suffer significant reliability issues at temperatures exceeding 125 C. The emergent technological frontiers of space exploration, geothermal energy harvesting, nuclear energy, unmanned avionic systems, and autonomous driving will rely on control systems, sensors, and communication devices which operate at temperatures as high as 500 C and beyond. At these extreme temperatures, active (heat exchanger, phase change cooling) or passive (fins and thermal interface materials) cooling strategies add significant mass and complication which is often infeasible. Thus, new material solutions beyond conventional silicon CMOS devices are necessary for high temperature, resilient electronic systems. Accomplishing this will require a united effort to explore development, integration, and ultimately manufacturing of non-silicon-based logic and memory technologies, non-traditional metals for interconnects, and ceramic packaging technology.

cond-mat.mtrl-sci↗

arXiv2024

Imprinting spin patterns by local strain control in a van der Waals antiferromagnet

Van der Waals magnets provide opportunities for exploring low-dimensional magnetism and spintronic phenomena. The Mermin-Wagner theorem states that long-range correlations in reduced dimensions are stabilized and controlled by magnetic anisotropy. In this study, we meticulously create and control the in-plane easy-axis magnetic anisotropy within two-dimensional (2D) van der Waals antiferromagnet MnPSe3 via a novel method involving topography and therefore strain control by using a micro-patterned substrate. By transposing the MnPSe3 thin flakes onto a substrate patterned with micro-scale grooves, we introduce local uniaxial strain pattern, which not only locks the spin direction to the strain direction but also replicates the groove pattern in the spin orientation distribution. Our approach generates spin orientations that correspond to the substrate patterns, therefore having the potential to significantly advance spintronic devices by offering a unique method for manipulating and designing spin textures in easy-plane magnets.

cond-mat.mtrl-sci↗

arXiv2024

Multistate ferroelectric diodes with high electroresistance based on van der Waals heterostructures

Some van der Waals (vdW) materials exhibit ferroelectricity, making them promising for novel non-volatile memories (NVMs) such as ferroelectric diodes (FeDs). CuInP2S6 (CIPS) is a well-known vdW ferroelectric that has been integrated with graphene for memory devices. Here we demonstrate FeDs with self-rectifying, hysteretic current-voltage characteristics based on vertical heterostructures of 10-nm-thick CIPS and graphene. By using vdW indium-cobalt top electrodes and graphene bottom electrodes, we achieve high electroresistance (on- and off-state resistance ratios) of ~10^6, on-state rectification ratios of ~2500 for read/write voltages of 2 V/0.5 V and maximum output current densities of 100 A/cm^2. These metrics compare favourably with state-of-the-art FeDs. Piezoresponse force microscopy measurements show that stabilization of intermediate net polarization states in CIPS leads to stable multi-bit data retention at room temperature. The combination of two-terminal design, multi-bit memory, and low-power operation in CIPS-based FeDs is potentially interesting for compute-in-memory and neuromorphic computing applications.

physics.app-ph↗

arXiv2024

> 2π Phase Modulation using Exciton-Polaritons in a Two-Dimensional Superlattice

Active metamaterials promise to enable arbitrary, temporal control over the propagation of wavefronts of light for applications such as beam steering, optical communication modulators, and holograms. This has been done in the past using patterned silicon photonics to locally control the phase of light such that the metasurface acts as a large number of wavelets. Although phase modulation only requires refractive index modulation when the interaction length is on the order of the wavelength, this is not enough to significantly modulate the phase of light in flatland. Instead, phase modulation is achieved using a resonant mode such as a plasmon or high-Q cavity mode that enable light to accumulate a large amount of phase over a short distance and coupling it to an active material that modulates the light-matter interactions. Here, we report that electrostatic doping can modulate the light-matter interaction strength of a two-dimensional WS2 based multi quantum well (MQW) structure going from strongly-coupled, phase-accumulating exciton-polaritons to weakly-coupled exciton-trion-polaritons. As a result of this transition, 2.02π radians of phase modulation is observed using spectroscopic ellipsometry. This result demonstrates the potential of the MQW structure as a compact, lightweight electro-optical modulators for LiDAR and optical communications in the red region of visible spectrum.

physics.optics↗

arXiv2024

Broadband Light Harvesting from Scalable Two-Dimensional Semiconductor Heterostructures

Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experimental realization of an unpatterned/planar semiconductor thin-film absorber based on monolayer transition metal dichalcogenides (TMDCs). We experimentally demonstrate an average total absorption in the visible range (450 nm - 700 nm) of > 70% using > 4 nm of semiconductor absorbing materials scalable over large areas with vapor phase growth techniques. Our analysis suggests that a power conversion efficiency (PCE) of 15.54% and a specific power > 300 W g^-1 may be achieved in a photovoltaic cell based on this metamaterial absorber.

physics.optics↗

arXiv2024

Quantum Confined Luminescence in Two dimensions

Achieving localized light emission from monolayer two-dimensional (2D) transition metal dichalcogenides (TMDs) embedded in the matrix of another TMD has been theoretically proposed but not experimentally proven. In this study, we used cathodoluminescence performed in a scanning transmission electron microscope to unambiguously resolve localized light emission from 2D monolayer MoSe2 nanodots of varying sizes embedded in monolayer WSe2 matrix. We observed that the light emission strongly depends on the nanodot size wherein the emission is dominated by MoSe2 excitons in dots larger than 85 nm, and by MoSe2/WSe2 interface excitons below 50 nm. Interestingly, at extremely small dot sizes (< 10 nm), the electron energy levels in the nanodot become quantized, as demonstrated by a striking blue-shift in interface exciton emission, thus inducing quantum confined luminescence. These results establish controllable light emission from spatially confined 2D nanodots, which holds potential to be generalized to other 2D systems towards future nanophotonic applications.

cond-mat.mtrl-sci↗

arXiv2024

High-Performance Ferroelectric Field-Effect Transistors with Ultra-High Current and Carrier Densities

Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of FeFETs can be limited by a charge imbalance between the ferroelectric layer and the channel, and for low-dimensional semiconductors, also by a high contact resistance between the metal electrodes and the channel. Here, we report a significant enhancement in performance of contact-engineered FeFETs with a 2D MoS2 channel and a ferroelectric Al0.68Sc0.32N (AlScN) gate dielectric. Replacing Ti with In contact electrodes results in a fivefold increase in on-state current (~120 uA/um at 1 V) and on-to-off ratio (~2*10^7) in the FeFETs. In addition, the high carrier concentration in the MoS2 channel during the on-state (> 10^14 cm^-2) facilitates the observation of a metal-to-insulator phase transition in monolayer MoS2 permitting observation of high field effect mobility (> 100 cm^2V^-1s^-1) at cryogenic temperatures. Our work and devices broaden the potential of FeFETs and provides a unique platform to implement high-carrier-density transport in a 2D channel.

physics.app-ph↗