arXiv subjects

Andreas F. Molisch

Publications and source records attributed to Andreas F. Molisch.

At least 127 records · Page 7Linked to original sources

arXiv2017

Localization of Multiple Targets with Identical Radar Signatures in Multipath Environments with Correlated Blocking

This paper addresses the problem of localizing an unknown number of targets, all having the same radar signature, by a distributed MIMO radar consisting of single antenna transmitters and receivers that cannot determine directions of departure and arrival. Furthermore, we consider the presence of multipath propagation, and the possible (correlated) blocking of the direct paths (going from the transmitter and reflecting off a target to the receiver). In its most general form, this problem can be cast as a Bayesian estimation problem where every multipath component is accounted for. However, when the environment map is unknown, this problem is ill-posed and hence, a tractable approximation is derived where only direct paths are accounted for. In particular, we take into account the correlated blocking by scatterers in the environment which appears as a prior term in the Bayesian estimation framework. A sub-optimal polynomial-time algorithm to solve the Bayesian multi-target localization problem with correlated blocking is proposed and its performance is evaluated using simulations. We found that when correlated blocking is severe, assuming the blocking events to be independent and having constant probability (as was done in previous papers) resulted in poor detection performance, with false alarms more likely to occur than detections.

cs.IT↗

arXiv2017

Outdoor to Indoor Penetration Loss at 28 GHz for Fixed Wireless Access

This paper present the results from a 28 GHz channel sounding campaign performed to investigate the effects of outdoor to indoor penetration on the wireless propagation channel characteristics for an urban microcell in a fixed wireless access scenario. The measurements are performed with a real-time channel sounder, which can measure path loss up to 169 dB, and equipped with phased array antennas that allows electrical beam steering for directionally resolved measurements in dynamic environments. Thanks to the short measurement time and the excellent phase stability of the system, we obtain both directional and omnidirectional channel power delay profiles without any delay uncertainty. For outdoor and indoor receiver locations, we compare path loss, delay spreads and angular spreads obtained for two different types of buildings.

cs.IT↗

arXiv2017

Dynamic Double Directional Propagation Channel Measurements at 28 GHz

This paper presents results from the (to our knowledge) first dynamic double-directionally resolved measurement campaign at mm-wave frequencies for an outdoor microcellular scenario. The measurements are performed with USC's real-time channel sounder equipped with phased array antennas that can steer beams electrically in microseconds, allowing directional measurements in dynamic environments. Exploiting the phase coherency of the setup, the multi-path components can be tracked over time to investigate the temporal dependencies of the channel characteristics. We present results for time-varying path-loss, delay spread, mean angles and angular spreads observed at the transmitter (TX) and receiver (RX) in the presence of moving vehicles and pedestrians. Additionally, we investigate excess losses observed due to blockage by vehicles and compare the cases when TX and RX are using fixed beams or when they are capable of adjusting beam directions dynamically.

cs.IT↗

arXiv2017

28 GHz Microcell Measurement Campaign for Residential Environment

This paper presents results from the (to our knowledge) first double-directionally resolved measurement campaign at mm-wave frequencies in a suburban microcell. The measurements are performed with a real-time channel sounder equipped with phased antenna arrays that allows electrical beam steering in microseconds, and which can measure path-loss of up to 169 dB. Exploiting the phase coherency of the measurements in the different beams, we obtain both directional and omnidirectional channel power delay profiles without any delay uncertainty. We present statistics of channel characteristics such as path-loss, shadowing and delay spread results for line-of-sight and non-line-of-sight cases, as well as sample results for power angular spectrum and extracted multi-path components.

cs.IT↗

arXiv2017

Optimal Control of Wireless Computing Networks

Augmented information (AgI) services allow users to consume information that results from the execution of a chain of service functions that process source information to create real-time augmented value. Applications include real-time analysis of remote sensing data, real-time computer vision, personalized video streaming, and augmented reality, among others. We consider the problem of optimal distribution of AgI services over a wireless computing network, in which nodes are equipped with both communication and computing resources. We characterize the wireless computing network capacity region and design a joint flow scheduling and resource allocation algorithm that stabilizes the underlying queuing system while achieving a network cost arbitrarily close to the minimum, with a tradeoff in network delay. Our solution captures the unique chaining and flow scaling aspects of AgI services, while exploiting the use of the broadcast approach coding scheme over the wireless channel.

cs.NI↗

arXiv2017

Optimal Dynamic Cloud Network Control

Distributed cloud networking enables the deployment of a wide range of services in the form of interconnected software functions instantiated over general purpose hardware at multiple cloud locations distributed throughout the network. We consider the problem of optimal service delivery over a distributed cloud network, in which nodes are equipped with both communication and computation resources. We address the design of distributed online solutions that drive flow processing and routing decisions, along with the associated allocation of cloud and network resources. For a given set of services, each described by a chain of service functions, we characterize the cloud network capacity region and design a family of dynamic cloud network control (DCNC) algorithms that stabilize the underlying queuing system, while achieving arbitrarily close to minimum cost with a tradeoff in network delay. The proposed DCNC algorithms make local decisions based on the online minimization of linear and quadratic metrics obtained from an upper bound on the Lyapunov drift-plus-penalty of the cloud network queuing system. Minimizing a quadratic vs. a linear metric is shown to improve the cost-delay tradeoff at the expense of increased computational complexity. Our algorithms are further enhanced with a shortest transmission-plus-processing distance bias that improves delay performance without compromising throughput or overall cloud network cost. We provide throughput and cost optimality guarantees, convergence time analysis, and extensive simulations in representative cloud network scenarios.

cs.NI↗

arXiv2017

Overview of Millimeter Wave Communications for Fifth-Generation (5G) Wireless Networks-with a focus on Propagation Models

This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and channel models for understanding mmWave propagation, such as line-of-sight (LOS) probabilities, large-scale path loss, and building penetration loss, as modeled by various standardization bodies, are compared over the 0.5-100 GHz range.

cs.IT↗

arXiv2017

Asymptotic Blind-spot Analysis of Localization Networks under Correlated Blocking using a Poisson Line Process

In a localization network, the line-of-sight between anchors (transceivers) and targets may be blocked due to the presence of obstacles in the environment. Due to the non-zero size of the obstacles, the blocking is typically correlated across both anchor and target locations, with the extent of correlation increasing with obstacle size. If a target does not have line-of-sight to a minimum number of anchors, then its position cannot be estimated unambiguously and is, therefore, said to be in a blind-spot. However, the analysis of the blind-spot probability of a given target is challenging due to the inherent randomness in the obstacle locations and sizes. In this letter, we develop a new framework to analyze the worst-case impact of correlated blocking on the blind-spot probability of a typical target; in particular, we model the obstacles by a Poisson line process and the anchor locations by a Poisson point process. For this setup, we define the notion of the asymptotic blind-spot probability of the typical target and derive a closed-form expression for it as a function of the area distribution of a typical Poisson-Voronoi cell. As an upper bound for the more realistic case when obstacles have finite dimensions, the asymptotic blind-spot probability is useful as a design tool to ensure that the blind-spot probability of a typical target does not exceed a desired threshold, $ε$.

cs.NI↗

arXiv2017

A Real-Time Millimeter-Wave Phased Array MIMO Channel Sounder

In this paper, we present a novel real-time MIMO channel sounder for 28 GHz. Until now, the common practice to investigate the directional characteristics of millimeter-wave channels has been using a rotating horn antenna. The sounder presented here is capable of performing horizontal and vertical beam steering with the help of phased arrays. Thanks to fast beam-switching capability, the proposed sounder can perform measurements that are directionally resolved both at the transmitter (TX) and receiver (RX) as fast as 1.44 milliseconds compared to the minutes or even hours required for rotating horn antenna sounders. This does not only enable us to measure more points for better statistical inference but also allows to perform directional analysis in dynamic environments. Equally importantly, the short measurement time combined with the high phase stability of our setup limits the phase drift between TX and RX, enabling phase-coherent sounding of all beam pairs even when TX and RX are physically separated and have no cabled connection for synchronization. This ensures that the measurement data is suitable for high-resolution parameter extraction algorithms. Along with the system design and specifications, this paper also discusses the measurements performed for verification of the sounder. Furthermore, we present sample measurements from a channel sounding campaign performed on a residential street.

cs.IT↗

arXiv2017

Hybrid Beamforming for Massive MIMO - A Survey

Hybrid multiple-antenna transceivers, which combine large-dimensional analog pre/postprocessing with lower-dimensional digital processing, are the most promising approach for reducing the hardware cost and training overhead in massive MIMO systems. This paper provides a comprehensive survey of the various incarnations of such structures that have been proposed in the literature. We provide a taxonomy in terms of the required channel state information (CSI), namely whether the processing adapts to the instantaneous or the average (second-order) CSI; while the former provides somewhat better signal-to-noise and interference ratio (SNIR), the latter has much lower overhead for CSI acquisition. We furthermore distinguish hardware structures of different complexities. Finally, we point out the special design aspects for operation at millimeter-wave frequencies.

cs.IT↗

arXiv2017

3D MIMO Outdoor-to-Indoor Propagation Channel Measurement

3-dimensional Multiple-Input Multiple-Output (3D MIMO) systems have received great interest recently because of the spatial diversity advantage and capability for full-dimensional beamforming, making them promising candidates for practical realization of massive MIMO. In this paper, we present a low-cost test equipment (channel sounder) and post-processing algorithms suitable for investigating 3D MIMO channels, as well as the results from a measurement campaign for obtaining elevation and azimuth characteristics in an outdoor-to-indoor (O2I) environment. Due to limitations in available antenna switches, our channel sounder consists of a hybrid switched/virtual cylindrical array with effectively 480 antenna elements at the base station (BS). The virtual setup increased the overall MIMO measurement duration, thereby introducing phase drift errors in the measurements. Using a reference antenna measurements, we estimate and correct for the phase errors during post-processing. We provide the elevation and azimuth angular spreads, for the measurements done in an urban macro-cellular (UMa) and urban micro-cellular (UMi) environments, and study their dependence on the UE height. Based on the measurements done with UE placed on different floors, we study the feasibility of separating users in the elevation domain. The measured channel impulse responses are also used to study the channel hardening aspects of Massive MIMO and the optimality of Maximum Ratio Combining (MRC) receiver.

cs.IT↗

arXiv2016

Cache-enabled Device-to-Device Communications: Offloading Gain and Energy Cost

By caching files at users, content delivery traffic can be offloaded via device-to-device (D2D) links if a helper user is willing to transmit the cached file to the user who requests the file. In practice, the user device has limited battery capacity, and may terminate the D2D connection when its battery has little energy left. Thus, taking the battery consumption allowed by the helper users to support D2D into account introduces a reduction in the possible amount of offloading. In this paper, we investigate the relationship between offloading gain of the system and energy cost of each helper user. To this end, we introduce a user-centric protocol to control the energy cost for a helper user to transmit the file. Then, we optimize the proactive caching policy to maximize the offloading opportunity, and optimize the transmit power at each helper to maximize the offloading probability. Finally, we evaluate the overall amount of traffic offloaded to D2D links and evaluate the average energy consumption at each helper, with the optimized caching policy and transmit power. Simulations show that a significant amount of traffic can be offloaded even when the energy cost is kept low.

cs.IT↗

arXiv2016

Indoor 5G 3GPP-like Channel Models for Office and Shopping Mall Environments

Future mobile communications systems are likely to be very different to those of today with new service innovations driven by increasing data traffic demand, increasing processing power of smart devices and new innovative applications. To meet these service demands the telecommunications industry is converging on a common set of 5G requirements which includes network speeds as high as 10 Gbps, cell edge rate greater than 100 Mbps, and latency of less than 1 msec. To reach these 5G requirements the industry is looking at new spectrum bands in the range up to 100 GHz where there is spectrum availability for wide bandwidth channels. For the development of new 5G systems to operate in bands up to 100 GHz there is a need for accurate radio propagation models which are not addressed by existing channel models developed for bands below 6 GHz. This paper presents a preliminary overview of the 5G channel models for bands up to 100 GHz in indoor offices and shopping malls, derived from extensive measurements across a multitude of bands. These studies have found some extensibility of the existing 3GPP models to the higher frequency bands up to 100 GHz. The measurements indicate that the smaller wavelengths introduce an increased sensitivity of the propagation models to the scale of the environment and show some frequency dependence of the path loss as well as increased occurrence of blockage. Further, the penetration loss is highly dependent on the material and tends to increase with frequency. The small-scale characteristics of the channel such as delay spread and angular spread and the multipath richness is somewhat similar over the frequency range, which is encouraging for extending the existing 3GPP models to the wider frequency range. Further work will be carried out to complete these models, but this paper presents the first steps for an initial basis for the model development.

cs.IT↗

arXiv2016

5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments

For the development of new 5G systems to operate in bands up to 100 GHz, there is a need for accurate radio propagation models at these bands that currently are not addressed by existing channel models developed for bands below 6 GHz. This document presents a preliminary overview of 5G channel models for bands up to 100 GHz. These have been derived based on extensive measurement and ray tracing results across a multitude of frequencies from 6 GHz to 100 GHz, and this document describes an initial 3D channel model which includes: 1) typical deployment scenarios for urban microcells (UMi) and urban macrocells (UMa), and 2) a baseline model for incorporating path loss, shadow fading, line of sight probability, penetration and blockage models for the typical scenarios. Various processing methodologies such as clustering and antenna decoupling algorithms are also presented.

cs.IT↗

arXiv2015

Wireless Multihop Device-to-Device Caching Networks

We consider a wireless device-to-device (D2D) network where $n$ nodes are uniformly distributed at random over the network area. We let each node with storage capacity $M$ cache files from a library of size $m \geq M$. Each node in the network requests a file from the library independently at random, according to a popularity distribution, and is served by other nodes having the requested file in their local cache via (possibly) multihop transmissions. Under the classical "protocol model" of wireless networks, we characterize the optimal per-node capacity scaling law for a broad class of heavy-tailed popularity distributions including Zipf distributions with exponent less than one. In the parameter regimes of interest, we show that a decentralized random caching strategy with uniform probability over the library yields the optimal per-node capacity scaling of $Θ(\sqrt{M/m})$, which is constant with $n$, thus yielding throughput scalability with the network size. Furthermore, the multihop capacity scaling can be significantly better than for the case of single-hop caching networks, for which the per-node capacity is $Θ(M/m)$. The multihop capacity scaling law can be further improved for a Zipf distribution with exponent larger than some threshold $> 1$, by using a decentralized random caching uniformly across a subset of most popular files in the library. Namely, ignoring a subset of less popular files (i.e., effectively reducing the size of the library) can significantly improve the throughput scaling while guaranteeing that all nodes will be served with high probability as $n$ increases.

cs.IT↗

arXiv2015

The Throughput-Outage Tradeoff of Wireless One-Hop Caching Networks

We consider a wireless device-to-device (D2D) network where the nodes have pre-cached information from a library of available files. Nodes request files at random. If the requested file is not in the on-board cache, then it is downloaded from some neighboring node via one-hop "local" communication. An outage event occurs when a requested file is not found in the neighborhood of the requesting node, or if the network admission control policy decides not to serve the request. We characterize the optimal throughput-outage tradeoff in terms of tight scaling laws for various regimes of the system parameters, when both the number of nodes and the number of files in the library grow to infinity. Our analysis is based on Gupta and Kumar {\em protocol model} for the underlying D2D wireless network, widely used in the literature on capacity scaling laws of wireless networks without caching. Our results show that the combination of D2D spectrum reuse and caching at the user nodes yields a per-user throughput independent of the number of users, for any fixed outage probability in $(0,1)$. This implies that the D2D caching network is "scalable": even though the number of users increases, each user achieves constant throughput. This behavior is very different from the classical Gupta and Kumar result on ad-hoc wireless networks, for which the per-user throughput vanishes as the number of users increases. Furthermore, we show that the user throughput is directly proportional to the fraction of cached information over the whole file library size. Therefore, we can conclude that D2D caching networks can turn "memory" into "bandwidth" (i.e., doubling the on-board cache memory on the user devices yields a 100\% increase of the user throughout).

cs.IT↗

arXiv2014

Experimental Demonstration of Nanosecond Accuracy Wireless Network Synchronization

Accurate wireless timing synchronization has been an extremely important topic in wireless sensor networks, required in applications ranging from distributed beam forming to precision localization and navigation. However, it is very challenging to realize, in particular when the required accuracy should be better than the runtime between the nodes. This work presents, to our knowledge for the first time, an experimental timing synchronization scheme that achieves a timing accuracy better than 5ns rms in a network with 4 nodes. The experimental hardware is built from commercially available components and based on software defined ultra wideband transceivers. The protocol for establishing the synchronization is based on our recently developed blink protocol that can scale from the small network demonstrated here to larger networks of hundreds or thousands of nodes.

cs.NI↗

arXiv2014

Performance Metrics and Design Parameters for a Free-space Communication Link Based on Multiplexing of Multiple Orbital-Angular-Momentum Beams

We study the design parameters for an orbital angular momentum (OAM) multiplexed free-space data link. Power loss, channel crosstalk and power penalty of the link are analyzed in the case of misalignment between the transmitter and receiver (lateral displacement, receiver angular error, or transmitter pointing error). The relationship among the system power loss and link distance, transmitted beam size and receiver aperture size are discussed based on the beam divergence due to free space propagation. We also describe the trade-offs for different receiver aperture sizes and mode spacing of the transmitted OAM beams under given lateral displacements or receiver angular errors. Through simulations and some experiments, we show that (1) a system with a larger transmitted beam size and a larger receiver aperture is more tolerant to the lateral displacement but less tolerant to the receiver angular error; (2) a system with a larger mode spacing, which uses larger OAM charges, suffers more system power loss but less channel crosstalk; thus, a system with a small mode spacing shows lower system power penalty when system power loss dominates (e.g., small lateral displacement or receiver angular error) while that with a larger mode spacing shows lower power penalty when channel crosstalk dominates (e.g., larger lateral displacement or receiver angular error); (3) the effects of lateral displacement and receiver angular error are not necessarily independent; as an example of them combined, the effects of the transmitter pointing error on the system are also investigated.

physics.optics↗