arXiv subjects

Andreas F. Molisch

Publications and source records attributed to Andreas F. Molisch.

At least 109 records · Page 6Linked to original sources

arXiv2019

Channel Extrapolation in FDD Massive MIMO: Theoretical Analysis and Numerical Validation

Downlink channel estimation in massive MIMO systems is well known to generate a large overhead in frequency division duplex (FDD) mode as the amount of training generally scales with the number of transmit antennas. Using instead an extrapolation of the channel from the measured uplink estimates to the downlink frequency band completely removes this overhead. In this paper, we investigate the theoretical limits of channel extrapolation in frequency. We highlight the advantage of basing the extrapolation on high-resolution channel estimation. A lower bound (LB) on the mean squared error (MSE) of the extrapolated channel is derived. A simplified LB is also proposed, giving physical intuition on the SNR gain and extrapolation range that can be expected in practice. The validity of the simplified LB relies on the assumption that the paths are well separated. The SNR gain then linearly improves with the number of receive antennas while the extrapolation performance penalty quadratically scales with the ratio of the frequency and the training bandwidth. The theoretical LB is numerically evaluated using a 3GPP channel model and we show that the LB can be reached by practical high-resolution parameter extraction algorithms. Our results show that there are strong limitations on the extrapolation range than can be expected in SISO systems while much more promising results can be obtained in the multiple-antenna setting as the paths can be more easily separated in the delay-angle domain.

cs.IT↗

arXiv2019

Throughput-Outage Analysis and Evaluation of Cache-Aided D2D Networks with Measured Popularity Distributions

Caching of video files on user devices, combined with file exchange through device-to-device (D2D) communications is a promising method for increasing the throughput of wireless networks. Previous theoretical investigations showed that throughput can be increased by orders of magnitude, but assumed a Zipf distribution for modeling the popularity distribution, which was based on observations in {\em wired} networks. Thus the question whether cache-aided D2D video distribution can provide in practice the benefits promised by existing theoretical literature remains open. To answer this question, we provide new results specifically for popularity distributions of video requests of mobile users. Based on an extensive real-world dataset, we adopt a generalized distribution, known as Mandelbrot-Zipf (MZipf) distribution. We first show that this popularity distribution can fit the practical data well. Using this distribution, we analyze the throughput--outage tradeoff of the cache-aided D2D network and show that the scaling law is identical to the case of Zipf popularity distribution when the MZipf distribution is sufficiently skewed, implying that the benefits previously promised in the literature could indeed be realized in practice. To support the theory, practical evaluations using numerical experiments are provided, and show that the cache-aided D2D can outperform the conventional unicasting from base stations.

cs.IT↗

arXiv2019

Sparsity in the Delay-Doppler Domain for Measured 60 GHz Vehicle-to-Infrastructure Communication Channels

We report results from millimeter wave vehicle-to-infrastructure (V2I) channel measurements conducted on Sept. 25, 2018 in an urban street environment, down-town Vienna, Austria. Measurements of a frequency-division multiplexed multiple-input single-output channel have been acquired with a time-domain channel sounder at 60 GHz with a bandwidth of 100 MHz and a frequency resolution of 5 MHz. Two horn antennas were used on a moving transmitter vehicle: one horn emitted a beam towards the horizon and the second horn emitted an elevated beam at 15-degrees up-tilt. This configuration was chosen to assess the impact of beam elevation on V2I communication channel characteristics: propagation loss and sparsity of the local scattering function in the delay-Doppler domain. The measurement results within urban speed limits show high sparsity in the delay-Doppler domain.

eess.SP↗

arXiv2019

Enable Super-resolution Parameter Estimation for Mm-wave Channel Sounding

This paper investigates the capability of millimeter-wave (mmWave) channel sounders with phased arrays to perform super-resolution parameter estimation, i.e., determine the parameters of multipath components (MPC), such as direction of arrival and delay, with resolution better than the Fourier resolution of the setup. We analyze the question both generally, and with respect to a particular novel multi-beam mmWave channel sounder that is capable of performing multiple-input-multiple-output (MIMO) measurements in dynamic environments. We firstly propose a novel two-step calibration procedure that provides higher-accuracy calibration data that are required for Rimax or SAGE. Secondly, we investigate the impact of center misalignment and residual phase noise on the performance of the parameter estimator. Finally we experimentally verify the calibration results and demonstrate the capability of our sounder to perform super-resolution parameter estimation.

cs.IT↗

arXiv2019

Periodic Analog Channel Estimation Aided Beamforming for Massive MIMO Systems

Analog beamforming is an attractive and cost-effective solution to exploit the benefits of massive multiple-input-multiple-output systems, by requiring only one up/down-conversion chain. However, the presence of only one chain imposes a significant overhead in estimating the channel state information required for beamforming, when conventional digital channel estimation (CE) approaches are used. As an alternative, this paper proposes a novel CE technique, called periodic analog CE (PACE), that can be performed by analog hardware. By avoiding digital processing, the estimation overhead is significantly lowered and does not scale with number of antennas. PACE involves periodic transmission of a sinusoidal reference signal by the transmitter, estimation of its amplitude and phase at each receive antenna via analog hardware, and using these estimates for beamforming. To enable such non-trivial operation, two reference tone recovery techniques and a novel receiver architecture for PACE are proposed and analyzed, both theoretically and via simulations. Results suggest that in sparse, wide-band channels and above a certain signal-to-noise ratio, PACE aided beamforming suffers only a small loss in beamforming gain and enjoys a much lower CE overhead, in comparison to conventional approaches. Benefits of using PACE aided beamforming during the initial access phase are also discussed.

cs.IT↗

arXiv2018

Inferring Remote Channel State Information: Cramér-Rao Lower Bound and Deep Learning Implementation

Channel state information (CSI) is of vital importance in wireless communication systems. Existing CSI acquisition methods usually rely on pilot transmissions, and geographically separated base stations (BSs) with non-correlated CSI need to be assigned with orthogonal pilots which occupy excessive system resources. Our previous work adopts a data-driven deep learning based approach which leverages the CSI at a local BS to infer the CSI remotely, however the relevance of CSI between separated BSs is not specified explicitly. In this paper, we exploit a model-based methodology to derive the Cramér-Rao lower bound (CRLB) of remote CSI inference given the local CSI. Although the model is simplified, the derived CRLB explicitly illustrates the relationship between the inference performance and several key system parameters, e.g., terminal distance and antenna array size. In particular, it shows that by leveraging multiple local BSs, the inference error exhibits a larger power-law decay rate (w.r.t. number of antennas), compared with a single local BS; this explains and validates our findings in evaluating the deep-neural-network-based (DNN-based) CSI inference. We further improve on the DNN-based method by employing dropout and deeper networks, and show an inference performance of approximately $90\%$ accuracy in a realistic scenario with CSI generated by a ray-tracing simulator.

cs.IT↗

arXiv2018

Exploiting Wireless Channel State Information Structures Beyond Linear Correlations: A Deep Learning Approach

Knowledge of information about the propagation channel in which a wireless system operates enables better, more efficient approaches for signal transmissions. Therefore, channel state information (CSI) plays a pivotal role in the system performance. The importance of CSI is in fact growing in the upcoming 5G and beyond systems, e.g., for the implementation of massive multiple-input multiple-output (MIMO). However, the acquisition of timely and accurate CSI has long been considered as a major issue, and becomes increasingly challenging due to the need for obtaining CSI of many antenna elements in massive MIMO systems. To cope with this challenge, existing works mainly focus on exploiting linear structures of CSI, such as CSI correlations in the spatial domain, to achieve dimensionality reduction. In this article, we first systematically review the state-of-the-art on CSI structure exploitation; then extend to seek for deeper structures that enable remote CSI inference wherein a data-driven deep neural network (DNN) approach is necessary due to model inadequacy. We develop specific DNN designs suitable for CSI data. Case studies are provided to demonstrate great potential in this direction for future performance enhancement.

cs.IT↗

arXiv2018

Caching at the Wireless Edge: Design Aspects, Challenges and Future Directions

Caching at the wireless edge is a promising way of boosting spectral efficiency and reducing energy consumption of wireless systems. These improvements are rooted in the fact that popular contents are reused, asynchronously, by many users. In this article, we first introduce methods to predict the popularity distributions and user preferences, and the impact of erroneous information. We then discuss the two aspects of caching systems, namely content placement and delivery. We expound the key differences between wired and wireless caching, and outline the differences in the system arising from where the caching takes place, e.g., at base stations, or on the wireless devices themselves. Special attention is paid to the essential limitations in wireless caching, and possible tradeoffs between spectral efficiency, energy efficiency and cache size.

cs.NI↗

arXiv2018

Band Assignment in Dual Band Systems: A Learning-based Approach

We consider the band assignment problem in dual band systems, where the base-station (BS) chooses one of the two available frequency bands (centimeter-wave and millimeter-wave bands) to communicate data to the mobile station (MS). While the millimeter-wave band offers higher data rate when it is available, there is a significant probability of outage during which the communication should be carried on the centimeter-wave band. In this work, we use a machine learning framework to provide an efficient and practical solution to the band assignment problem. In particular, the BS trains a Neural Network (NN) to predict the right band assignment decision using observed channel information. We study the performance of the NN in two environments: (i) A stochastic channel model with correlated bands, and (ii) microcellular outdoor channels obtained by simulations with a commercial ray-tracer. For the former case, for sake of comparison we also develop a threshold based band assignment that relies on the optimal mean square error estimator of the best band. In addition, we study the performance of the NN-based solution with different NN structures and different observed parameters (position, field strength, etc.). We compare the achieved performance to linear and logistic regression based solutions as well as the threshold based solution. Under practical constraints, the learning based band assignment shows competitive or superior performance in both environments.

eess.SP↗

arXiv2018

Orthogonal Time Frequency Space Modulation

This paper introduces a new two-dimensional modulation technique called Orthogonal Time Frequency Space (OTFS) modulation. OTFS has the novel and important feature of being designed in the delay-Doppler domain. When coupled with a suitable equalizer, OTFS modulation is able to exploit the full channel diversity over both time and frequency. Moreover, it converts the fading, time-varying wireless channel experienced by modulated signals such as OFDM into a time-independent channel with a complex channel gain that is essentially constant for all symbols. This design obviates the need for transmitter adaptation, and greatly simplifies system operation. The paper describes the basic operating principles of OTFS as well as a possible implementation as an overlay to current or anticipated standardized systems. OTFS is shown to provide significant performance improvement in systems with high Doppler, short packets, and/or large antenna array. In particular, simulation results indicate at least several dB of block error rate performance improvement for OTFS over OFDM in all of these settings.

cs.IT↗

arXiv2018

Real-Time Millimeter-Wave MIMO Channel Sounder for Dynamic Directional Measurements

In this paper, we present a novel real-time multiple-input-multiple-output (MIMO) channel sounder for the 28 GHz band. Until now, most investigations of the directional characteristics of millimeter-wave channels have used mechanically rotating horn antennas. In contrast, the sounder presented here is capable of performing horizontal and vertical beam steering with the help of phased arrays. Due to its fast beam-switching capability, the proposed sounder can perform measurements that are directionally resolved both at the transmitter(TX) and receiver (RX) in 1.44 milliseconds compared to the minutes or even hours required for rotating horn antenna sounders. This not only enables measurement of more TX-RX locations for a better statistical validity but also allows to perform directional analysis in dynamic environments. The short measurement time combined with the high phase stability limits the phase drift between TX and RX, enabling phase-coherent sounding of all beam pairs even when TX and RX have no cabled connection for synchronization without any delay ambiguity. Furthermore, the phase stability over time enables complex RX waveform averaging to improve the signal to noise ratio during high path loss measurements. The paper discusses both the system design as well as the measurements performed for verification of the sounder performance. Furthermore, we present sample results from double directional measurements in dynamic environments.

eess.SP↗

arXiv2018

A Tractable Analysis of the Blind-spot Probability in Localization Networks under Correlated Blocking

In localization applications, the line-of-sight between anchors and targets may be blocked by obstacles in the environment. A target that is invisible (i.e., without line-of-sight) to a sufficient number of anchors cannot be unambiguously localized and is, therefore, said to be in a blind spot. In this paper, we analyze the blind spot probability of a typical target by using stochastic geometry to model the randomness in the obstacle and anchor locations. In doing so, we handle correlated anchor blocking induced by the obstacles, unlike previous works that assume independent anchor blocking. We first characterize the regime over which the independent blocking assumption underestimates the blind spot probability of the typical target, which in turn, is characterized as a function of the distribution of the visible area, surrounding the target location. Since this distribution is difficult to characterize exactly, we formulate the nearest two-obstacle approximation, which is equivalent to considering correlated blocking for only the nearest two obstacles from the target and assuming independent blocking for the remaining obstacles. Based on this, we derive an approximate expression for the blind spot probability, which helps determine the anchor deployment intensity needed for the blind spot probability of a typical target to be at most a threshold, $μ$.

cs.NI↗

arXiv2018

On channel sounding with switched arrays in fast time-varying channels

Time-division multiplexed (TDM) channel sounders, in which a single RF chain is connected sequentially via an electronic switch to different elements of an array, are widely used for the measurement of double-directional/MIMO propagation channels. This paper investigates the impact of array switching patterns on the accuracy of parameter estimation of multipath components (MPC) for a time-division multiplexed (TDM) channel sounder. The commonly-used sequential (uniform) switching pattern poses a fundamental limit on the number of antennas that a TDM channel sounder can employ in fast time-varying channels. We thus aim to design improved patterns that relax these constraints. To characterize the performance, we introduce a novel spatio-temporal ambiguity function, which can handle the non-idealities of real-word arrays. We formulate the sequence design problem as an optimization problem and propose an algorithm based on simulated annealing to obtain the optimal sequence. As a result we can extend the estimation range of Doppler shifts by eliminating ambiguities in parameter estimation. We show through Monte Carlo simulations that the root mean square errors of both direction of departure and Doppler are reduced significantly with the new switching sequence. Results are also verified with actual vehicle-to-vehicle (V2V) channel measurements.

cs.IT↗

arXiv2018

Antenna Switching Sequence Design for Channel Sounding in a Fast Time-varying Channel

This paper investigates the impact of array switching patterns on the accuracy of parameter estimation of multipath components for a time division multiplexed (TDM) channel sounder. To measure fast time-varying channels, the conventional uniform array switching pattern poses a fundamental limit of the number of antennas that a TDM channel sounder can utilize. We propose a method, which is based on the simulated annealing algorithm, to find non-uniform array switching patterns for realistic antenna arrays, so that we can extend the Doppler estimation range of the channel sounder by suppressing the high sidelobes in the spatio-temporal ambiguity function. Monte Carlo simulations demonstrate that the optimal switching sequence leads to significantly smaller root mean square errors of both direction of departure and Doppler. Results can be applied in both vehicle-to-vehicle and mobile millimeter wave MIMO channel measurements.

eess.SP↗

arXiv2018

Hybrid Beamforming with Selection for Multi-user Massive MIMO Systems

This work studies a variant of hybrid beamforming, namely, hybrid beamforming with selection (HBwS), as an attractive solution to reduce the hardware cost of multi-user Massive Multiple-Input-Multiple-Output systems, while retaining good performance. Unlike conventional hybrid beamforming, in a transceiver with HBwS, the antenna array is fed by an analog beamforming matrix with $\bar{L}$ input ports, where $\bar{L}$ is larger than the number of up/down-conversion chains $\bar{K}$. A bank of switches connects the instantaneously best $\bar{K}$ out of the $\bar{L}$ input ports to the up/down-conversion chains. The analog beamformer is designed based on average channel statistics and therefore needs to be updated only infrequently, while the switches operate based on instantaneous channel knowledge. HBwS allows use of simpler hardware in the beamformer that only need to adjust to the statistics, while also enabling the effective analog beams to adapt to the instantaneous channel variations via switching. This provides better user separability, beamforming gain, and/or simpler hardware than some conventional hybrid schemes. In this work, a novel design for the analog beamformer is derived and approaches to reduce the hardware and computational cost of a multi-user HBwS system are explored. In addition, we study how $\bar{L}$, the switch bank architecture, the number of users and the channel estimation overhead impact system performance.

cs.IT↗

arXiv2018

Characterizing the Impact of SNR Heterogeneity on Time-of-Arrival based Localization Outage Probability

In localization, an outage occurs if the positioning error exceeds a pre-defined threshold, $ε_{\rm th}$. For time-of-arrival based localization, a key factor affecting the positioning error is the relative positions of the anchors, with respect to the target location. Specifically, the positioning error is a function of (a) the distance-dependent signal-to-noise ratios (SNRs) of the anchor-target links, and (b) the pairwise angles subtended by the anchors at the target location. From a design perspective, characterizing the distribution of the positioning error over an ensemble of target and anchor locations is essential for providing probabilistic performance guarantees against outage. To solve this difficult problem, previous works have assumed all links to have the same SNR (i.e., SNR homogeneity), which neglects the impact of distance variation among the anchors on the positioning error. In this paper, we model SNR heterogeneity among anchors using a distance-dependent pathloss model and derive an accurate approximation for the error complementary cumulative distribution function (ccdf). By highlighting the accuracy of our results, relative to previous ones that ignore SNR heterogeneity, we concretely demonstrate that SNR heterogeneity has a considerable impact on the error distribution.

cs.NI↗

arXiv2018

MmWave vehicle-to-infrastructure communication: Analysis of urban microcellular networks

Vehicle-to-infrastructure (V2I) communication may provide high data rates to vehicles via millimeter-wave (mmWave) microcellular networks. This paper uses stochastic geometry to analyze the coverage of urban mmWave microcellular networks. Prior work used a pathloss model with a line-of-sight probability function based on randomly oriented buildings, to determine whether a link was line-of-sight or non-line-of-sight. In this paper, we use a pathloss model inspired by measurements, which uses a Manhattan distance pathloss model and accounts for differences in pathloss exponents and losses when turning corners. In our model, streets are randomly located as a Manhattan Poisson line process (MPLP) and the base stations (BSs) are distributed according to a Poisson point process. Our model is well suited for urban microcellular networks where the BSs are deployed at street level. Based on this new approach, we derive the coverage probability under certain BS association rules to obtain closed-form solutions without much complexity. In addition, we draw two main conclusions from our work. First, non-line-of-sight BSs are not a major benefit for association or source of interference most of the time. Second, there is an ultra-dense regime where deploying active BSs does not enhance coverage.

cs.NI↗

arXiv2017

A Lower Bound To The Expected Discovery Time In One-Way Random Neighbor Discovery

We provide a lower bound on the expected discovery time of one-way neighbor discovery in multi antenna system. We assume that the scheme allows to use different directional transmission probabilities, which result in different probability of successful discovery between nodes. The proof shows that the lower bound to the expected discovery time, that node $i$ takes to discover its neighbors, is given by the reciprocal of the average probabilities of successful discovery.

math.OC↗