arXiv subjects

Andreas F. Molisch

Publications and source records attributed to Andreas F. Molisch.

At least 91 records · Page 5Linked to original sources

arXiv2020

Experimental Investigation of Frequency Domain Channel Extrapolation in Massive MIMO Systems for Zero-Feedback FDD

Estimating downlink (DL) channel state information (CSI) in frequency division duplex (FDD) massive multi-input multi-output (MIMO) systems generally requires downlink pilots and feedback overheads. Accordingly, this paper investigates the feasibility of zero-feedback FDD massive MIMO systems based on channel extrapolation. We use the high-resolution parameter estimation (HRPE), specifically the space-alternating generalized expectation-maximization (SAGE) algorithm, to extrapolate the DL CSI based on the extracted parameters of multipath components in the uplink channel. We apply the HRPE to two different channel models: the vector spatial signature (VSS) model and the direction of arrival (DOA) model. We verify these methods through real-world channel data acquired from channel measurement campaigns with two different types of channel sounders: a) a switched array-based, real-time, time-domain, outdoors setup at 3.5 GHz, and b) a virtual array-based, high-accuracy, frequency-domain, indoors setup at 2.4 and 5-7 GHz. The performance metrics of the extrapolated channels that we evaluate include the mean squared error, beamforming efficiency, and spectral efficiency in multiuser MIMO scenarios. The results show that the HRPE-based channel extrapolation performs best under the simple VSS model, which does not require array calibration, and if the BS is in an open outdoor environment having line-of-sight (LOS) paths to well-separated users.

eess.SP↗

arXiv2020

Impact of UAV Wobbling on the Air-to-Ground Wireless Channel

This paper studies the impact of unmanned aerial vehicle (UAV) wobbling on the coherence time of the wireless channel between UAVs and a ground user equipment (UE), using a Rician multi-path channel model. We consider two different scenarios for the number of UAVs: (i) single UAV scenario (SUS), and (ii) multiple UAV scenario (MUS). For each scenario, we model UAV wobbling by two random processes, i.e., the Wiener and sinusoidal processes, and characterize the channel autocorrelation function (ACF) which is then used to derive the coherence time of the channel. For the MUS, we further show that the UAV-UE channels for different UAVs are uncorrelated from each other. A key observation in this paper is that even for small UAV wobbling, the coherence time of the channel may degrade quickly, which may make it difficult to track the channel and establish a reliable communication link.

cs.IT↗

arXiv2020

Favorable Propagation with User Cluster Sharing

We examine the favorable propagation (FP) behavior of a massive multi-user multiple-input-multiple-output (MU-MIMO) system equipped with a uniform linear array (ULA), horizontal uniform rectangular array (HURA) or uniform circular array (UCA) using a ray-based channel model with user cluster sharing. We demonstrate FP for these systems and provide analytical expressions for the mean-squared distance (MSD) of the FP metric from its large-system limit for each of the aforementioned topologies. We use these results to examine the detrimental effects of user cluster sharing on FP behavior, and demonstrate the superior performance of the ULA as compared to the UCA and the HURA with equal inter-element spacing. Although cluster sharing has a negative impact on FP for finite arrays, we additionally examine the asymptotic rate of convergence to FP as a function of array size and show that this rate is unchanged with or without user cluster sharing.

eess.SP↗

arXiv2020

Hybrid Beamforming Structure for Massive MIMO System: Full-connection v.s. Partial-connection

In this article we compare the performance of two typical hyrbid beamforming structures for multiuser massive MIMO systems, i.e., the full- and partial-connection structures. Under the assumption of small angular spread for mmWave channels, given the analog precoder formed towards users and the zero-forcing digital precoder, we develop an explicit upper bound for the analog-and-digital-precoded channel gain of users, based on which the relationship between the two structures is investigated. The analysis results show that the full-connection structure is not always better than the partial-connection structure, and the regimes suitable for each structure are revealed. Simulations are conducted to validate the analysis results.

eess.SP↗

arXiv2020

Standardization of Propagation Models: 800 MHz to 100 GHz -- A Historical Perspective

Propagation models constitute a fundamental building block of wireless communications research. Before we build and operate real systems, we must understand the science of radio propagation, and develop channel models that both reflect the important propagation processes and allow a fair comparison of different systems. In the past five decades, wireless systems have gone through five generations, from supporting voice applications to enhanced mobile broadband. To meet the ever increasing data rate demands of wireless systems, frequency bands covering a wide range from 800 MHz to 100 GHz have been allocated for use. The standardization of these systems started in the early/mid 1980's in Europe by the European Telecommunications Standards Institute with the advent of Global System for Mobile Communications. This motivated the development of the first standardized propagation model by the European Cooperation in Science and Technology (COST) 207 working group. These standardization activities were continued and expanded for the third, fourth, and fifth generations of COST, as well as by the Third Generation Partnership Project, and the International Telecommunication Union. This paper presents a historical overview of the standardized propagation models covering first to fifth-generation systems. In particular, we discuss the evolution and standardization of pathloss models, as well as large and small-scale fading parameters for single antenna and multiple antenna systems. Furthermore, we present insights into the progress of deterministic modelling across the five generations of systems, as well as discuss more advanced modelling components needed for the detailed simulations of millimeter-wave channels. A comprehensive bibliography at the end of the paper will aid the interested reader to dig deeper.

eess.SP↗

arXiv2020

Individual Preference Aware Caching Policy Design in Wireless D2D Networks

Cache-aided wireless device-to-device (D2D) networks allow significant throughput increase, depending on the concentration of the popularity distribution of files. Many studies assume that all users have the same preference distribution; however, this may not be true in practice. This work investigates whether and how the information about individual preferences can benefit cache-aided D2D networks. We examine a clustered network and derive a network utility that considers both the user distribution and channel fading effects into the analysis. We also formulate a utility maximization problem for designing caching policies. This maximization problem can be applied to optimize several important quantities, including throughput, energy efficiency (EE), cost, and hit-rate, and to solve different tradeoff problems. We provide a general approach that can solve the proposed problem under the assumption that users coordinate, then prove that the proposed approach can obtain the stationary point under a mild assumption. Using simulations of practical setups, we show that performance can improve significantly with proper exploitation of individual preferences. We also show that different types of tradeoffs exist between different performance metrics and that they can be managed through caching policy and cooperation distance designs.

cs.NI↗

arXiv2020

Robust Non-Coherent Beamforming for FDD Downlink Massive MIMO

Designing beamforming techniques for the downlink (DL) of frequency division duplex (FDD) massive MIMO is known to be a challenging problem due to the difficulty of obtaining channel state information (CSI). Indeed, since the uplink-downlink bands are disjoint, the system cannot rely on channel reciprocity to estimate the channel from uplink (UL) pilots as in time division duplexing (TDD) system. Still, in this paper, we propose original designs for robust beamformers that do not require any feedback from the users and only rely on the transmission of UL pilots. The price to pay is that the beamformer is non-coherent in the sense that it does not leverage full knowledge of the phase of each multipath component. A large variety of novel designs are proposed under different criterion and partial phase knowledge.

eess.SP↗

arXiv2020

Real-Time Deployment Aspects of C-Band and Millimeter-Wave 5G-NR Systems

Fifth-generation (5G) new radio (NR) deployments are being rolled out in both the C-band (3.3 - 5.0 GHz) and millimeter-wave (mmWave) band (24.5 - 29.5 GHz). For outdoor scenarios, the C-band is expected to provide wide area coverage and throughput uniformity, whereas the mmWave band is expected to provide ultra-high throughput to dedicated areas within the C-band coverage. Due to the differences in the frequency bands, both systems are expected to be designed with different transmit and receive parameters, naturally resulting in performance variations proportional to the chosen parameters. Unlike many previous works, this paper presents measurement evaluations in central Auckland, New Zealand, from a pre-commercial deployment of a single-user, single-cell 5G-NR system operating in both bands. The net throughput, coverage reliability, and channel rank are analyzed across the two bands with baseband and analog beamforming. Our results show that the C-band coverage is considerably better than mmWave, with a consistently higher channel rank. Furthermore, the spatial stationarity region (SSR) for the azimuth angles-of-departure (AODs) is characterized, and a model derived from the measured beam identities is presented. The SSR of azimuth AODs is seen to closely follow a gamma distribution.

cs.IT↗

arXiv2020

Cache Allocations for Consecutive Requests of Categorized Contents: Service Provider's Perspective

In wireless caching networks, a user generally has a concrete purpose of consuming contents in a certain preferred category, and requests multiple contents in sequence. While most existing research on wireless caching and delivery has focused only on one-shot requests, the popularity distribution of contents requested consecutively is definitely different from the one-shot request and has been not considered. Also, especially from the perspective of the service provider, it is advantageous for users to consume as many contents as possible. Thus, this paper proposes two cache allocation policies for categorized contents and consecutive user demands, which maximize 1) the cache hit rate and 2) the number of consecutive content consumption, respectively. Numerical results show how categorized contents and consecutive content requests have impacts on the cache allocation.

cs.NI↗

arXiv2020

Performance Analysis of Channel Extrapolation in FDD Massive MIMO Systems

Channel estimation for the downlink of frequency division duplex (FDD) massive MIMO systems is well known to generate a large overhead as the amount of training generally scales with the number of transmit antennas in a MIMO system. In this paper, we consider the solution of extrapolating the channel frequency response from uplink pilot estimates to the downlink frequency band, which completely removes the training overhead. We first show that conventional estimators fail to achieve reasonable accuracy. We propose instead to use high-resolution channel estimation. We derive theoretical lower bounds (LB) for the mean squared error (MSE) of the extrapolated channel. Assuming that the paths are well separated, the LB is simplified in an expression that gives considerable physical insight. It is then shown that the MSE is inversely proportional to the number of receive antennas while the extrapolation performance penalty scales with the square of the ratio of the frequency offset and the training bandwidth. The channel extrapolation performance is validated through numeric simulations and experimental measurements taken in an anechoic chamber. Our main conclusion is that channel extrapolation is a viable solution for FDD massive MIMO systems if accurate system calibration is performed and favorable propagation conditions are present.

eess.SP↗

arXiv2019

A Machine Learning Solution for Beam Tracking in mmWave Systems

Utilizing millimeter-wave (mmWave) frequencies for wireless communication in \emph{mobile} systems is challenging since it requires continuous tracking of the beam direction. Recently, beam tracking techniques based on channel sparsity and/or Kalman filter-based techniques were proposed where the solutions use assumptions regarding the environment and device mobility that may not hold in practical scenarios. In this paper, we explore a machine learning-based approach to track the angle of arrival (AoA) for specific paths in realistic scenarios. In particular, we use a recurrent neural network (R-NN) structure with a modified cost function to track the AoA. We propose methods to train the network in sequential data, and study the performance of our proposed solution in comparison to an extended Kalman filter based solution in a realistic mmWave scenario based on stochastic channel model from the QuaDRiGa framework. Results show that our proposed solution outperforms an extended Kalman filter-based method by reducing the AoA outage probability, and thus reducing the need for frequent beam search.

eess.SP↗

arXiv2019

Joint Distributed Link Scheduling and Power Allocation for Content Delivery in Wireless Caching Networks

In wireless caching networks, the design of the content delivery method must consider random user requests, caching states, network topology, and interference management. In this paper, we establish a general framework for content delivery in wireless caching networks without stringent assumptions that restrict the network structure, delivery link, and interference model. Based on the framework, we propose a dynamic and distributed link scheduling and power allocation scheme for content delivery that is assisted by belief-propagation (BP) algorithms. Considering content-requesting users and potential caching nodes, the scheme achieves three critical purposes of wireless caching networks: 1) limiting the delay of user request satisfactions, 2) maintaining the power efficiency of caching nodes, and 3) managing interference among users. In addition, we address the intrinsic problem of the BP algorithm in our network model, proposing a matching algorithm for one-to-one link scheduling. Simulation results show that the proposed scheme provides almost the same delay performance as the optimal scheme found through an exhaustive search at the expense of a little additional power consumption and does not require a clustering method and orthogonal resources in a large-scale D2D network.

eess.SY↗

arXiv2019

Double Directional Channel Measurements for THz Communications in an Urban Environment

While mm-wave systems are a mainstay for 5G communications, the inexorable increase of data rate requirements and user densities will soon require the exploration of next-generation technologies. Among these, Terahertz (THz) band communication seems to be a promising direction due to availability of large bandwidth in the electromagnetic spectrum in this frequency range, and the ability to exploit its directional nature by directive antennas with small form factors. The first step in the analysis of any communication system is the analysis of the propagation channel, since it determines the fundamental limitations it faces. While THz channels have been explored for indoor, short-distance communications, the channels for {\em wireless access links in outdoor environments} are largely unexplored. In this paper, we present the - to our knowledge - first set of double-directional outdoor propagation channel measurements for the THz band. Specifically, the measurements are done in the 141 - 148.5 GHz range, which is one of the frequency bands recently allocated for THz research by the Federal Communication Commission (FCC). We employ double directional channel sounding using a frequency domain sounding setup based on RF-over-Fiber (RFoF) extensions for measurements over 100 m distance in urban scenarios. An important result is the surprisingly large number of directions (i.e., direction-of-arrival and direction-of-departure pairs) that carry significant energy. More generally, our results suggest fundamental parameters that can be used in future THz Band analysis and implementations.

eess.SP↗

arXiv2019

Continuous Analog Channel Estimation Aided Beamforming for Massive MIMO Systems

Analog beamforming greatly reduces the implementation cost of massive antenna transceivers by using only one up/down-conversion chain. However, it incurs a large pilot overhead when used with conventional channel estimation (CE) techniques. This is because these CE techniques involve digital processing, requiring the up/down-conversion chain to be time-multiplexed across the antenna dimensions. This paper introduces a novel CE technique, called continuous analog channel estimation (CACE), that avoids digital processing, enables analog beamforming at the receiver and additionally provides resilience against oscillator phase-noise. By avoiding time-multiplexing of up/down-conversion chains, the CE overhead is reduced significantly and furthermore becomes independent of the number of antenna elements. In CACE, a reference tone is transmitted continuously with the data signals, and the receiver uses the received reference signal as a matched filter for combining the data signals, albeit via analog processing. We propose a receiver architecture for CACE, analyze its performance in the presence of oscillator phase-noise, and derive near-optimal system parameters and power allocation. Transmit beamforming and initial access procedure with CACE are also discussed. Simulations confirm that, in comparison to conventional CE, CACE provides phase-noise resilience and a significant reduction in the CE overhead, while suffering only a small loss in signal-to-interference-plus-noise-ratio.

cs.IT↗

arXiv2019

Channel Extrapolation for FDD Massive MIMO: Procedure and Experimental Results

Application of massive multiple-input multiple-output (MIMO) systems to frequency division duplex (FDD) is challenging mainly due to the considerable overhead required for downlink training and feedback. Channel extrapolation, i.e., estimating the channel response at the downlink frequency band based on measurements in the disjoint uplink band, is a promising solution to overcome this bottleneck. This paper presents measurement campaigns obtained by using a wideband (350 MHz) channel sounder at 3.5 GHz composed of a calibrated 64 element antenna array, in both an anechoic chamber and outdoor environment. The Space Alternating Generalized Expectation-Maximization (SAGE) algorithm was used to extract the parameters (amplitude, delay, and angular information) of the multipath components from the attained channel data within the training (uplink) band. The channel in the downlink band is then reconstructed based on these path parameters. The performance of the extrapolated channel is evaluated in terms of mean squared error (MSE) and reduction of beamforming gain (RBG) in comparison to the ground truth, i.e., the measured channel at the downlink frequency. We find strong sensitivity to calibration errors and model mismatch, and also find that performance depends on propagation conditions: LOS performs significantly better than NLOS.

eess.SP↗

arXiv2019

Channel Correlation Diversity in MU-MIMO Systems -- Analysis and Measurements

In multiuser multiple-input multiple-output (MU-MIMO) systems, channel correlation is detrimental to system performance. We demonstrate that widely used, yet overly simplified, correlation models that generate identical correlation profiles for each terminal tend to severely underestimate the system performance. In sharp contrast, more physically motivated models that capture variations in the power angular spectra across multiple terminals, generate diverse correlation patterns. This has a significant impact on the system performance. Assuming correlated Rayleigh fading and downlink zero-forcing precoding, tight closed-form approximations for the average signal-to-noise-ratio, and ergodic sum spectral efficiency are derived. Our expressions provide clear insights into the impact of diverse correlation patterns on the above performance metrics. Unlike previous works, the correlation models are parameterized with measured data from a recent 2.53 GHz urban macrocellular campaign in Cologne, Germany. Overall, results from this paper can be treated as a timely re-calibration of performance expectations from practical MU-MIMO systems.

cs.IT↗

arXiv2019

Performance of Caching-Based D2D Video Distribution with Measured Popularity Distributions

On-demand video accounts for the majority of wireless data traffic. Video distribution schemes based on caching combined with device-to-device (D2D) communications promise order-of-magnitude greater spectral efficiency for video delivery, but hinge on the principle of `concentrated demand distributions.' This paper presents, for the first time, the analysis and evaluations of the throughput--outage tradeoff of such schemes based on measured cellular demand distributions. In particular, we use a dataset with more than 100 million requests from the BBC iPlayer, a popular video streaming service in the U.K., as the foundation of the analysis and evaluations. We present an achievable scaling law based on the practical popularity distribution, and show that such scaling law is identical to those reported in the literature. We find that also for the numerical evaluations based on a realistic setup, order-of-magnitude improvements can be achieved. Our results indicate that the benefits promised by the caching-based D2D in the literature could be retained for cellular networks in practice.

cs.NI↗

arXiv2019

How Many Antennas Do We Need for Massive MIMO Channel Sounding? - Validating Through Measurement

This paper investigates the impact of the number of antennas (8 to 64) and the array configuration on massive MIMO channel parameters estimation for multiple propagation scenarios at 3.5 GHz. Different measurement environments are artificially created by placing several reflectors and absorbers in an anechoic chamber. Ground truth channel parameters, e.g, path angles, are obtained by geometry and trigonometric rules. Then, these are compared to the channel parameters extracted by the applying Space-Alternating Generalized Expectation-Maximization (SAGE) algorithm on the measurements. Overall, the estimation errors for various array configurations and the multiple environments are compared. This paper will help to determine the appropriate configuration of the antenna array and the parameter extraction algorithm for outdoor massive MIMO channel sounding campaigns.

eess.SP↗