arXiv subjects

Andreas F. Molisch

Publications and source records attributed to Andreas F. Molisch.

At least 73 records · Page 4Linked to original sources

arXiv2022

Supervised ML Solution for Band Assignment in Dual-Band Systems with Omnidirectional and Directional Antennas

Many wireless networks, including 5G NR (New Radio) and future beyond 5G cellular systems, are expected to operate on multiple frequency bands. This paper considers the band assignment (BA) problem in dual-band systems, where the basestation (BS) chooses one of the two available frequency bands (centimeter-wave and millimeter-wave bands) to communicate with the user equipment (UE). While the millimeter-wave band might offer higher data rate, there is a significant probability of outage during which the communication should be carried on the (more reliable) centimeter-wave band. With mobility, the BA can be perceived as a sequential problem, where the BS uses previously observed information to predict the best band for a future time step. We formulate the BA as a binary classification problem and propose supervised Machine Learning (ML) solutions. We study the problem when both the BS and the UE use (i) omnidirectional antennas and (ii) both use directional antennas. In the omnidirectional case, we derive analytical benchmark solutions based on the Gaussian Process (GP) assumption for the inter-band shadow fading. In the directional case, where the labeling is shown to be complex, we propose an efficient labeling approach based on the Viterbi Algorithm (VA). We compare the performances for two channel models: (i) a stochastic channel and (ii) a ray-tracing based channel.

cs.LG↗

arXiv2021

THz Band Channel Measurements and Statistical Modeling for Urban Microcellular Environments

The THz band (0.1-10 THz) has attracted considerable attention for next-generation wireless communications, due to the large amount of available bandwidth that may be key to meet the rapidly increasing data rate requirements. Before deploying a system in this band, a detailed wireless channel analysis is required as the basis for proper design and testing of system implementations. One of the most important deployment scenarios of this band is the outdoor microcellular environment, where the Transmitter (Tx) and the Receiver (Rx) have a significant height difference (typically $ \ge 10$ m). In this paper, we present double-directional (i.e., directionally resolved at both link ends) channel measurements in such a microcellular scenario encompassing street canyons and an open square. Measurements are done for a 1 GHz bandwidth between 145-146 GHz and an antenna beamwidth of 13 degree; distances between Tx and Rx are up to 85 m and the Tx is at a height of 11.5 m from the ground. The measurements are analyzed to estimate path loss, shadowing, delay spread, angular spread, and multipath component (MPC) power distribution. These results allow the development of more realistic and detailed THz channel models and system performance assessment.

eess.SP↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part I: Channel characterization and antenna-channel optimization

To provide higher data rates, as well as better coverage, cost efficiency, security, adaptability, and scalability, the 5G and beyond 5G networks are developed with various artificial intelligence techniques. In this two-part paper, we investigate the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. It firstly provides a comprehensive overview of ML for channel characterization and ML-based antenna-channel optimization in this first part, and then it gives a state-of-the-art literature review of channel scenario identification and channel modeling in Part II. Fundamental results and key concepts of ML for communication networks are presented, and widely used ML methods for channel data processing, propagation channel estimation, and characterization are analyzed and compared. A discussion of challenges and future research directions for ML-enabled next generation networks of the topics covered in this part rounds off the paper.

eess.SP↗

arXiv2021

Artificial intelligence enabled radio propagation for communications-Part II: Scenario identification and channel modeling

This two-part paper investigates the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. In Part I, we introduced AI and ML as well as provided a comprehensive survey on ML enabled channel characterization and antenna-channel optimization, and in this part (Part II) we review state-of-the-art literature on scenario identification and channel modeling here. In particular, the key ideas of ML for scenario identification and channel modeling/prediction are presented, and the widely used ML methods for propagation scenario identification and channel modeling and prediction are analyzed and compared. Based on the state-of-art, the future challenges of AI/ML-based channel data processing techniques are given as well.

eess.SP↗

arXiv2021

Energy Efficiency of Uplink Cell-Free Massive MIMO With Transmit Power Control in Measured Propagation Channel

Cell-free massive MIMO (CF-mMIMO) provides wireless connectivity for a large number of user equipments (UEs) using access points (APs) distributed across a wide area with high spectral efficiency (SE). The energy efficiency (EE) of the uplink is determined by (i) the transmit power control (TPC) algorithms, (ii) the numbers, configurations, and locations of the APs and the UEs, and (iii) the propagation channels between the APs and the UEs. This paper investigates all three aspects, based on extensive (~30,000 possible AP locations and 128 possible UE locations) channel measurement data at 3.5 GHz. We compare three different TPC algorithms, namely maximization of transmit power (max-power), maximization of minimum SE (max-min SE), and maximization of minimum EE (max-min EE) while guaranteeing a target SE. We also compare various antenna arrangements including fully-distributed and semi-distributed systems, where APs can be located on a regular grid or randomly, and the UEs can be placed in clusters or far apart. Overall, we show that the max-min EE TPC is highly effective in improving the uplink EE, especially when no UE within a set of served UEs is in a bad channel condition and when the BS antennas are fully-distributed.

cs.IT↗

arXiv2021

A Geometry-Based Stochastic Model for Truck Communication Channels in Freeway Scenarios

Vehicle-to-vehicle (V2V) wireless communication systems are fundamental in many intelligent transportation applications, e.g., traffic load control, driverless vehicle, and collision avoidance. Hence, developing appropriate V2V communication systems and standardization require realistic V2V propagation channel models. However, most existing V2V channel modeling studies focus on car-to-car channels; only a few investigate truck-to-car (T2C) or truck-to-truck (T2T) channels. In this paper, a hybrid geometry-based stochastic model (GBSM) is proposed for T2X (T2C or T2T) channels in freeway environments. Next, we parameterize this GBSM from the extensive channel measurements. We extract the multipath components (MPCs) by using a joint maximum likelihood estimation (RiMAX) and then cluster the MPCs based on their evolution patterns.We classify the determined clusters as line-of-sight, multiple-bounce reflections from static interaction objects (IOs), multiple-bounce reflections from mobile IOs, multiple-bounce reflections, and diffuse scattering. Specifically, we model multiple-bounce reflections as double clusters following the COST 273/COST2100 method. This article presents the complete parameterization of the channel model. We validate this model by contrasting the root-mean-square delay spread and the angular spreads of departure/arrival derived from the channel model with the outcomes directly derived from the measurements.

eess.SP↗

arXiv2021

Quality-Aware Deep Reinforcement Learning for Streaming in Infrastructure-Assisted Connected Vehicles

This paper proposes a deep reinforcement learning-based video streaming scheme for mobility-aware vehicular networks, e.g., vehicles on the highway. We consider infrastructure-assisted and mmWave-based scenarios in which the macro base station (MBS) cannot directly provide the streaming service to vehicles due to the short range of mmWave beams so that small mmWave base stations (mBSs) along the road deliver the desired videos to users. For a smoother streaming service, the MBS proactively pushes video chunks to mBSs. This is done to support vehicles that are currently covered and/or will be by each mBS. We formulate the dynamic video delivery scheme that adaptively determines 1) which content, 2) what quality and 3) how many chunks to be proactively delivered from the MBS to mBSs using Markov decision process (MDP). Since it is difficult for the MBS to track all the channel conditions and the network states have extensive dimensions, we adopt the deep deterministic policy gradient (DDPG) algorithm for the DRL-based video delivery scheme. This paper finally shows that the DRL agent learns a streaming policy that pursues high average quality while limiting packet drops, avoiding playback stalls, reducing quality fluctuations and saving backhaul usage.

cs.NI↗

arXiv2021

Evaluation on Energy Efficiency of UE in UL Cell-Free Massive MIMO System With Power Control Methods

Cell-free massive multiple-input multiple-output (CF mMIMO) systems are expected to provide faster and more robust connections to user equipments (UEs) by cooperation of a massive number of distributed access points, and to be one of the key technologies for beyond 5G (B5G). In B5G, energy efficiency (EE) is one of the most important key indicators because various kinds of devices connect to the network and communicate with each other. While previously proposed transmit power control methods in CF mMIMO systems have aimed to maximize spectral efficiency or total EE, we evaluate in this paper a different approach for maximizing the minimum EE among all UEs. We show that this algorithm can provide the optimum solution in polynomial time, and demonstrate with simulations the improved minimum EE compared to conventional methods.

eess.SP↗

arXiv2021

THz Band Channel Measurements and Statistical Modeling for Urban D2D Environments

THz band is envisioned to be used in 6G systems to meet the ever-increasing demand for data rate. However, before an eventual system design and deployment can proceed, detailed channel sounding measurements are required to understand key channel characteristics. In this paper, we present a first extensive set of channel measurements for urban outdoor environments that are ultra-wideband (1 GHz 3dB bandwidth), and double-directional where both the transmitter and receiver are at the same height. In all, we present measurements at 38 Tx/Rx location pairs, consisting of a total of nearly 50,000 impulse responses, at both line-of-sight (LoS) and non-line-of-sight (NLoS) cases in the 1-100 m range. We provide modeling for path loss, shadowing, delay spread, angular spread and multipath component (MPC) power distribution. We find, among other things, that outdoor communication over tens of meters is feasible in this frequency range even in NLoS scenarios, that omni-directional delay spreads of up to 100 ns, and directional delay spreads of up to 10 ns are observed, while angular spreads are also quite significant, and a surprisingly large number of MPCs are observed for 1 GHz bandwidth and 13 degree beamwidth. These results constitute an important first step towards better understanding the wireless channel in the THz band.

eess.SP↗

arXiv2021

Intelligent Surface Optimization in Terahertz under Two Manifestations of Molecular Re-radiation

The operation of Terahertz (THz) communication can be significantly impacted by the interaction between the transmitted wave and the molecules in the atmosphere. In particular, it has been observed experimentally that the signal undergoes not only molecular absorption, but also molecular re-radiation. Two extreme modeling assumptions are prevalent in the literature, where the re-radiated energy is modeled in the first as additive Gaussian noise and in the second as a scattered component strongly correlated to the actual signal. Since the exact characterization is still an open problem, we provide in this paper the first comparative study of the performance of a reconfigurable intelligent surface (RIS) assisted THz system under these two extreme models of re-radiation. In particular, we employ an RIS to overcome the large pathloss by creating a virtual line-of-sight (LOS) path. We then develop an optimization framework for this setup and utilize the block-coordinate descent (BCD) method to iteratively optimize both RIS configuration vector and receive beamforming weight resulting in significant throughput gains for the user of interest compared to random RIS configurations. As expected, our results reveal that better throughput is achieved under the scattering assumption for the molecular re-radiation than the noise assumption.

eess.SP↗

arXiv2021

Uplink Energy Efficiency of Cell-Free Massive MIMO With Transmit Power Control in Measured Propagation Channels

Cell-free massive MIMO (CF-mMIMO) is expected to provide reliable wireless services for a large number of user equipments (UEs) using access points (APs) distributed across a wide area. When the UEs are battery-powered, uplink energy efficiency (EE) becomes an important performance metric for CF-mMIMO systems. Therefore, if the "target" spectral efficiency (SE) is met, it is important to optimize the uplink EE when setting the transmit powers of the UEs. Also, such transmit power control (TPC) method must be tested on channel data from real-world measurements to prove its effectiveness. In this paper, we compare three different TPC algorithms using zero-forcing reception by applying them to 3.5 GHz channel measurement data featuring ~30,000 possible AP locations and 8 UE locations in a 200mx200m area. We show that the max-min EE algorithm is highly effective in improving the uplink EE at a target SE, especially if the number of single-antenna APs is large, circuit power consumption is low, and the maximum allowed transmit power of the UEs is high.

eess.SP↗

arXiv2021

Throughput-Outage Scaling Behaviors for Wireless Single-Hop D2D Caching Networks with Physical Model -- Analysis and Derivations

Throughput-Outage scaling laws for single-hop cache-aided device-to-device (D2D) communications have been extensively investigated under the assumption of the protocol model. However, the corresponding performance under physical models has not been explored; in particular it remains unclear whether link-level power control and scheduling can improve the asymptotic performance. This paper thus investigates the throughput-outage scaling laws of cache-aided single-hop D2D networks considering a general physical channel model. By considering the networks with and without the equal-throughput assumption, we analyze the corresponding outer bounds and provide the achievable performance analysis. Results show that when the equal-throughput assumption is considered, using link-level power control and scheduling cannot improve the scaling laws. On the other hand, when the equal-throughput assumption is not considered, we show that the proposed double time-slot framework with appropriate link-level power control and scheduling can significantly improve the throughput-outage scaling laws, where the fundamental concept is to first distinguish links according to their communication distances, and then enhance the throughput for links with small communication distances.

cs.IT↗

arXiv2021

Approximation Algorithms for the NFV Service Distribution Problem

Distributed cloud networking builds on network functions virtualization (NFV) and software defined networking (SDN) to enable the deployment of network services in the form of elastic virtual network functions (VNFs) instantiated over general purpose servers at distributed cloud locations. We address the design of fast approximation algorithms for the NFV service distribution problem (NSDP), whose goal is to determine the placement of VNFs, the routing of service flows, and the associated allocation of cloud and network resources that satisfy client demands with minimum cost. We show that in the case of load-proportional costs, the resulting fractional NSDP can be formulated as a multi-commodity-chain flow problem on a cloud augmented graph, and design a queue-length based algorithm, named QNSD, that provides an O(ε) approximation in time O(1/ε). We then address the case in which resource costs are a function of the integer number of allocated resources and design a variation of QNSD that effectively pushes for flow consolidation into a limited number of active resources to minimize overall cloud network cost.

cs.NI↗

arXiv2021

6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities

Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. We present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges, as well as possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack. Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G eco-system will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands; and provide a unique perspective on the physical, as well as higher layer challenges relating to the design of next generation core networks, new modulation and coding methods, novel multiple access techniques, antenna arrays, wave propagation, radio-frequency transceiver design, as well as real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future that serves as a major source of latency for time-sensitive applications. While evaluating the strengths and weaknesses of key 6G technologies, we differentiate what may be achievable over the next decade, relative to what is possible.

eess.SP↗

arXiv2021

Air-to-Ground Directional Channel Sounder With 64-antenna Dual-polarized Cylindrical Array

Unmanned Aerial Vehicles (UAVs), popularly called drones, are an important part of future wireless communications, either as user equipment that needs communication with a ground station, or as base station in a 3D network. For both the analysis of the "useful" links, and for investigation of possible interference to other ground-based nodes, an understanding of the air-to-ground channel is required. Since ground-based nodes often are equipped with antenna arrays, the channel investigations need to account for it. This study presents a massive MIMO-based air-to-ground channel sounder we have recently developed in our lab, which can perform measurements for the aforementioned requirements. After outlining the principle and functionality of the sounder, we present sample measurements that demonstrate the capabilities, and give first insights into air-to-ground massive MIMO channels in an urban environment. Our results provide a platform for future investigations and possible enhancements of massive MIMO systems.

eess.SP↗

arXiv2020

A Comprehensive Survey of Machine Learning Based Localization with Wireless Signals

The last few decades have witnessed a growing interest in location-based services. Using localization systems based on Radio Frequency (RF) signals has proven its efficacy for both indoor and outdoor applications. However, challenges remain with respect to both complexity and accuracy of such systems. Machine Learning (ML) is one of the most promising methods for mitigating these problems, as ML (especially deep learning) offers powerful practical data-driven tools that can be integrated into localization systems. In this paper, we provide a comprehensive survey of ML-based localization solutions that use RF signals. The survey spans different aspects, ranging from the system architectures, to the input features, the ML methods, and the datasets. A main point of the paper is the interaction between the domain knowledge arising from the physics of localization systems, and the various ML approaches. Besides the ML methods, the utilized input features play a major role in shaping the localization solution; we present a detailed discussion of the different features and what could influence them, be it the underlying wireless technology or standards or the preprocessing techniques. A detailed discussion is dedicated to the different ML methods that have been applied to localization problems, discussing the underlying problem and the solution structure. Furthermore, we summarize the different ways the datasets were acquired, and then list the publicly available ones. Overall, the survey categorizes and partly summarizes insights from almost 400 papers in this field. This survey is self-contained, as we provide a concise review of the main ML and wireless propagation concepts, which shall help the researchers in either field navigate through the surveyed solutions, and suggested open problems.

eess.SY↗

arXiv2020

Optimal Throughput-Outage Analysis of Cache-Aided Wireless Multi-Hop D2D Networks -- Derivations of Scaling Laws

Cache-aided wireless device-to-device (D2D) networks have demonstrated promising performance improvement for video distribution compared to conventional distribution methods. Understanding the fundamental scaling behavior of such networks is thus of paramount importance. However, existing scaling laws for multi-hop networks have not been found to be optimal even for the case of Zipf popularity distributions (gaps between upper and lower bounds are not constants); furthermore, there are no scaling law results for such networks for the more practical case of a Mandelbrot-Zipf (MZipf) popularity distribution. We thus in this work investigate the throughput-outage performance for cache-aided wireless D2D networks adopting multi-hop communications, with the MZipf popularity distribution for file requests and users distributed according to Poisson point process. We propose an achievable content caching and delivery scheme and analyze its performance. By showing that the achievable performance is tight to the proposed outer bound, the optimal scaling law is obtained. Furthermore, since the Zipf distribution is a special case of the MZipf distribution, the optimal scaling law for the networks considering Zipf popularity distribution is also obtained, which closes the gap in the literature.

cs.IT↗

arXiv2020

Co-Located vs Distributed vs Semi-Distributed MIMO: Measurement-Based Evaluation

With the growing interest in cell-free massive multiple-input multiple-output (MIMO) systems, the benefits of single-antenna access points (APs) versus multi-antenna APs must be analyzed in order to optimize deployment. In this paper, we compare various antenna system topologies based on achievable downlink spectral efficiency, using both measured and synthetic channel data in an indoor environment. We assume multi-user scenarios, analyzing both conjugate beamforming (or maximum-ratio transmission (MRT)) and zero-forcing (ZF) precoding methods. The results show that the semi-distributed multi-antenna APs can reduce the number of APs, and still achieve the comparable achievable rates as the fully-distributed single-antenna APs with the same total number of antennas.

eess.SP↗