arXiv Science⌕ Search

arXiv subjects

Alex Alvarado

Publications and source records attributed to Alex Alvarado.

At least 55 records · Page 3Linked to original sources
arXiv2023

Integrated Sensing and Communications with MIMO-OTFS

Orthogonal time frequency space (OTFS) is a promising alternative to orthogonal frequency division multiplexing (OFDM) for high-mobility communications. We propose a novel multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system based on OTFS modulation. We begin by deriving new sensing and communication signal models for the proposed MIMO-OTFS ISAC system that explicitly capture inter-symbol interference (ISI) and inter-carrier interference (ICI) effects. We then develop a generalized likelihood ratio test (GLRT) based multi-target detection and delay-Doppler-angle estimation algorithm for MIMO-OTFS radar sensing that can simultaneously mitigate and exploit ISI/ICI effects, to prevent target masking and surpass standard unambiguous detection limits in range/velocity. Moreover, considering two operational modes (search/track), we propose an adaptive MIMO-OTFS ISAC transmission strategy. For the search mode, we introduce the concept of delay-Doppler (DD) multiplexing, enabling omnidirectional probing of the environment and large virtual array at the OTFS radar receiver. For the track mode, we pursue a directional transmission approach and design an OTFS ISAC optimization algorithm in spatial and DD domains, seeking the optimal trade-off between radar signal-to-noise ratio (SNR) and achievable rate. Simulation results verify the effectiveness of the proposed sensing algorithm and reveal valuable insights into OTFS ISAC trade-offs under varying communication channel characteristics.

eess.SP↗
arXiv2023

Data-driven Enhancement of the Time-domain First-order Regular Perturbation Model

A normalized batch gradient descent optimizer is proposed to improve the first-order regular perturbation coefficients of the Manakov equation, often referred to as kernels. The optimization is based on the linear parameterization offered by the first-order regular perturbation and targets enhanced low-complexity models for the fiber channel. We demonstrate that the optimized model outperforms the analytical counterpart where the kernels are numerically evaluated via their integral form. The enhanced model provides the same accuracy with a reduced number of kernels while operating over an extended power range covering both the nonlinear and highly nonlinear regimes. A $6-7$~dB gain, depending on the metric used, is obtained with respect to the conventional first-order regular perturbation.

eess.SP↗
arXiv2022

Geometrically-Shaped Multi-Dimensional Modulation Formats in Coherent Optical Transmission Systems

Shaping modulation formats in multi-dimensional (MD) space is an effective approach to harvest spectral efficiency gains in both the additive white Gaussian noise (AWGN) channel and the optical fiber channel. In the first part of this paper, existing MD geometrically-shaped modulations for fiber optical communications are reviewed. It is shown that large gains can be obtained by exploiting correlation in the dimensions or/and by increasing the cardinality of the modulation format. Practical limitations and challenges are also discussed together with efficient solutions. In the second part, we extend the recently proposed four-dimensional (4D) modulation format family based on the constraint of orthant-symmetry to high spectrum efficiencies up to 10 bit/4D-sym by maximizing generalized mutual information for AWGN channel. Reach increases of up to 25% for a multi-span optical fiber transmission system are reported. Lastly,with the help of a recently introduced nonlinear interference (NLI) model, an optimization for designing nonlinear-tolerant 4D modulation formats is introduced for a single-span optical fiber system. Simulation results show that the proposed NLI model-based 4D modulation format could increase the effective SNRs by 0.25 dB with respect to the AWGN channel-optimal 4D modulation format.

cs.IT↗
arXiv2022

Band-ESS: Streaming Enumerative Coding with Applications to Probabilistic Shaping

Probabilistic amplitude shaping (PAS) is on track to become the de facto coded modulation standard for communication systems aiming to operate close to channel capacity at high transmission rates. The essential component of PAS that breeds this widespread interest is the amplitude shaping block, through which the channel input distribution is controlled. This block is responsible for converting bit strings into amplitude sequences with certain properties, e.g., fixed composition, limited energy, limited energy variation, etc. Recently, band-trellis enumerative sphere shaping (B-ESS) was introduced as an amplitude shaping technique that achieves limited energy variations which is useful in optical communication scenarios. B-ESS operates based on a trellis diagram in which sequences with high energy variations are pruned. In this work, we study the implementation of B-ESS. We first show that thanks to the trellis structure obtained by this pruning, B-ESS can be implemented with very low storage complexity. The trellis computation is shown to be reduced to a set of recursive multiplications with a scalar factor. Then we show that this scalar factor can be adjusted such that the trellis computation is further simplified and realized with only binary shifts. This shift-based B-ESS (1) can be implemented for arbitrarily long blocklengths without incurring an increase in complexity, and (2) can operate in a streaming mode similar to convolutional coding.

cs.IT↗
arXiv2022

Log-CCDM: Distribution Matching via Multiplication-free Arithmetic Coding

Recent years have seen renewed attention to arithmetic coding (AC). This is thanks to the use of AC for distribution matching (DM) to control the channel input distribution in probabilistic amplitude shaping. There are two main problems inherent to AC: (1) its required arithmetic precision grows linearly with the input length, and (2) high-precision multiplications and divisions are required. Here, we introduce a multiplication-free AC-based DM technique via three lookup tables (LUTs) which solves both problems above. These LUTs are used to approximate the high-precision multiplications and divisions by additions and subtractions. The required precision of our approach is shown to grow logarithmically with the input length. We prove that this approximate technique maintains the invertibility of DM. At an input length of 1024 symbols, the proposed technique achieves negligible rate loss ($<0.01$ bit/sym) against the full-precision DM, while requiring less than 4 kilobytes of storage.

cs.IT↗
arXiv2022

Time-Limited Waveforms with Minimum Time Broadening for the Nonlinear Schrödinger Channel

Simple fiber optic communication systems can be implemented using energy modulation of isolated time-limited pulses. Fundamental solitons are one possible solution for such pulses which offer a fundamental advantage: their shape is not affected by fiber disperison and nonlinearity. Furthermore, a simple energy detector can be used at the receiver to detect the transmitted information. However, systems based on energy modulation of solitons are not competitive in terms of data rates. This is partly due to the fact that the effective time duration of a soliton depends on its chosen amplitude. In this paper, we propose to replace fundamental solitons by new time-limited waveforms that can be detected using an energy detector, and that are immune to fiber distortions. Our proposed solution relies on the prolate spheroidal wave functions and a numerical optimization routine. Time-limited waveforms that undergo minimum time broadening along an optical fiber are obtained and shown to outperform fundamental solitons. In the case of binary transmission and a single span of fiber, we report rate increases of 33.8% and 12% over lossy and lossless fibers, respectively. Furthermore, we show that the transmission rate of the proposed system increases as the number of used energy levels increases, which is not the case for fundamental solitons due to their effective time-amplitude constraint. For example, rate increases of 164% and 70% over lossy and lossless fibers respectively are reported when using four energy levels.

eess.SP↗
arXiv2022

Capacity Region Bounds for the K user Dispersive Nonlinear Optical WDM Channel with Peak Power Constraints

It is known that fiber nonlinearities induce crosstalk in a wavelength division multiplexed (WDM) system, which limits the capacity of such systems as the transmitted signal power is increased. A network user in a WDM system is an entity that operates around a given optical wavelength. Traditionally, the channel capacity of a WDM system has been analyzed under different assumptions for the transmitted signals of the other users, while treating the interference arising from these users as noise. In this paper, we instead take a multiuser information theoretic view and treat the optical WDM system impaired by cross-phase modulation and dispersion as an interference channel. We characterize an outer bound on the capacity region of simultaneously achievable rate pairs, assuming a simplified K-user perturbative channel model using genie-aided techniques. Furthermore, an achievable rate region is obtained by time-sharing between certain single-user strategies. It is shown that such time-sharing can achieve better rate tuples compared to treating nonlinear interference as noise. For the single-polarization single-span system under consideration and a power 4.4 dB above the optimum launch power, treating nonlinear interference as noise results in a rate of 1.67 bit/sym, while time-sharing gives a rate of 6.33 bit/sym.

cs.IT↗
arXiv2022

Real-time Transmission of Geometrically-shaped Signals using a Software-defined GPU-based Optical Receiver

A software-defined optical receiver is implemented on an off-the-shelf commercial graphics processing unit (GPU). The receiver provides real-time signal processing functionality to process 1 GBaud minimum phase (MP) 4-, 8-, 16-, 32-, 64-, 128-ary quadrature amplitude modulation (QAM) as well as geometrically shaped (GS) 8- and 128-QAM signals using Kramers-Kronig (KK) coherent detection. Experimental validation of this receiver over a 91~km field-deployed optical fiber link between two Tokyo locations is shown with detailed optical signal-to-noise ratio (OSNR) investigations. A net data rate of 5 Gbps using 64-QAM is demonstrated.

eess.SP↗
arXiv2022

Pulses with Minimum Residual Intersymbol Interference for Faster than Nyquist Signaling

Faster than Nyquist signaling increases the spectral efficiency of pulse amplitude modulation by accepting intersymbol interference, where an equalizer is needed at the receiver. Since the complexity of an optimal equalizer increases exponentially with the number of the interfering symbols, practical truncated equalizers assume shorter memory. The power of the resulting residual interference depends on the transmit filter and limits the performance of truncated equalizers. In this paper, we use numerical optimizations and the prolate spheroidal wave functions to find optimal time-limited pulses that achieve minimum residual interference. Compared to root raised cosine pulses, the new pulses decrease the residual interference by an order of magnitude, for example, a decrease by 32 dB is achieved for an equalizer that considers four interfering symbols at 57% faster transmissions. As a proof of concept, for the 57% faster transmissions of binary symbols, we showed that using the new pulse with a 4-state equalizer has better bit error rate performance compared to using a root raised cosine pulse with a 128-state equalizer.

eess.SP↗