arXiv Science⌕ Search

arXiv subjects

Alex Alvarado

Publications and source records attributed to Alex Alvarado.

At least 73 records · Page 4Linked to original sources
arXiv2021

High-Cardinality Hybrid Shaping for 4D Modulation Formats in Optical Communications Optimized via End-to-End Learning

In this paper we carry out a joint optimization of probabilistic (PS) and geometric shaping (GS) for four-dimensional (4D) modulation formats in long-haul coherent wavelength division multiplexed (WDM) optical fiber communications using an auto-encoder framework. We propose a 4D 10 bits/symbol constellation which we obtained via end-to-end deep learning over the split-step Fourier model of the fiber channel. The constellation achieved 13.6% reach increase at a data rate of approximately 400 Gbits/second in comparison to the ubiquitously employed polarization multiplexed 32-QAM format at a forward error correction overhead of 20%.

eess.SP↗
arXiv2021

Low-Complexity Geometrical Shaping for 4D Modulation Formats via Amplitude Coding

Signal shaping is vital to approach Shannon's capacity, yet it is challenging to implement at very high speeds. For example, probabilistic shaping often requires arithmetic coding to realize the target distribution. Geometric shaping requires look-up tables to store the constellation points. In this paper, we propose a four-dimensional amplitude coding (4D-AC) geometrical shaper architecture. The proposed architecture can generate in real time geometrically shaped 4D formats via simple logic circuit operations and two conventional quadrature amplitude modulation (QAM) modulators. This paper describes the 4D-AC used in generating approximated versions of two recently proposed 4D orthant symmetric modulation formats with spectral efficiencies of 6 bit/4D-sym and 7 bit/4D-sym, respectively. Numerical results show losses below 0.05 dB when compared against the baseline formats.

eess.SP↗
arXiv2021

Kurtosis-limited Sphere Shaping for Nonlinear Interference Noise Reduction in Optical Channels

Nonlinear interference (NLI) generated during the propagation of an optical waveform through the fiber depends on the fourth order standardized moment of the channel input distribution, also known as kurtosis. Probabilistically-shaped inputs optimized for the linear Gaussian channel have a Gaussian-like distribution with high kurtosis. For optical channels, this leads to an increase in NLI power and consequently, a decrease in effective signal-to-noise ratio (SNR). In this work, we propose kurtosis-limited enumerative sphere shaping (K-ESS) as an algorithm to generate low-kurtosis shaped inputs. Numerical simulations at a shaping blocklength of 108 amplitudes demonstrate that with K-ESS, it is possible to increase the effective SNRs by 0.4 dB in a single-span single-channel scenario at 400 Gbit/s. K-ESS offers also a twofold decrease in frame error rate with respect to Gaussian-channel-optimal sphere shaping.

eess.SP↗
arXiv2021

List-encoding CCDM: A Nonlinearity-tolerant Shaper Aided by Energy Dispersion Index

Recently, a metric called energy dispersion index (EDI) was proposed to indicate the nonlinear interference (NLI) induced by correlated symbols during optical transmission. In this paper, we propose a new shaper architecture to decrease the EDI of transmitted symbols and thus, increase the signal-to-noise ratio (SNR). We call this shaper the list-encoding constant-composition distribution matcher (L-CCDM). L-CCDM consists of an additional EDI selecting module, which is compatible with standard probabilistic amplitude shaping (PAS) architecture. Numerical results obtained from a multi-span multi-channel system show that when compared to standard CCDM with 256-ary quadrature amplitude modulation (256QAM), the proposed architecture offers an effective SNR gain of 0.35 dB, an achievable information rate gain of 0.22 bit/4D-symbol, or equivalently an 8% reach extension.

eess.SP↗
arXiv2021

Orthogonal Time Frequency Space Modulation: A Discrete Zak Transform Approach

In orthogonal time frequency space (OTFS) modulation, information-carrying symbols reside in the delay-Doppler (DD) domain. By operating in the DD domain, an appealing property for communication arises: time-frequency (TF) dispersive channels encountered in high mobility environments become time-invariant. The time-invariance of the channel in the DD domain enables efficient equalizers for time-frequency dispersive channels. In this paper, we propose an OTFS system based on the discrete Zak transform. The presented formulation not only allows an efficient implementation of OTFS but also simplifies the derivation and analysis of the input-output relation of TF dispersive channel in the DD domain.

eess.SP↗
arXiv2021

On Parameter Optimization and Reach Enhancement for the Improved Soft-Aided Staircase Decoder

The so-called improved soft-aided bit-marking algorithm was recently proposed for staircase codes (SCCs) in the context of fiber optical communications. This algorithm is known as iSABM-SCC. With the help of channel soft information, the iSABM-SCC decoder marks bits via thresholds to deal with both miscorrections and failures of hard-decision (HD) decoding. In this paper, we study iSABM-SCC focusing on the parameter optimization of the algorithm and its performance analysis, in terms of the gap to the achievable information rates (AIRs) of HD codes and the fiber reach enhancement. We show in this paper that the marking thresholds and the number of modified component decodings heavily affect the performance of iSABM-SCC, and thus, they need to be carefully optimized. By replacing standard decoding with the optimized iSABM-SCC decoding, the gap to the AIRs of HD codes can be reduced to 0.26-1.02 dB for code rates of 0.74-0.87 in the additive white Gaussian noise channel with 8-ary pulse amplitude modulation. The obtained reach increase is up to 22% for data rates between 401 Gbps and 468 Gbps in an optical fiber channel.

cs.IT↗
arXiv2021

Performance Prediction Recipes for Optical Links

Although forward error-correction (FEC) coding is an essential part of modern fiber-optic communication systems, it is impractical to implement and evaluate FEC in transmission experiments and simulations. Therefore, it is desirable to accurately predict the end-to-end link performance including FEC from transmission data recorded without FEC. In this tutorial, we provide ready-to-implement "recipes" for such prediction techniques, which apply to arbitrary channels and require no knowledge of information or coding theory. The appropriate choice of recipe depends on properties of the FEC encoder and decoder. The covered metrics include bit error rate, symbol error rate, achievable information rate, and asymptotic information, in all cases computed using a mismatched receiver. Supplementary software implementations are available.

cs.IT↗
arXiv2021

Radar Sensing with OTFS: Embracing ISI and ICI to Surpass the Ambiguity Barrier

Orthogonal time frequency space (OTFS) is a promising alternative to orthogonal frequency division multiplexing (OFDM) in high-mobility beyond 5G communications. In this paper, we consider the problem of radar sensing with OTFS joint radar-communications waveform and derive a novel OTFS radar signal model by explicitly taking into account the intersymbol interference (ISI) and inter-carrier interference (ICI) effects. On the basis of the new model, we show how ISI and ICI phenomena can be turned into an advantage to surpass the maximum unambiguous detection limits in range and velocity, arising in existing OFDM and OTFS radar systems. Moreover, we design a generalized likelihood ratio test based detector/estimator that can embrace ISI and ICI effects. Simulation results illustrate the potential of embracing ISI/ICI and demonstrate its superior detection and estimation performance over conventional baselines.

eess.SP↗
arXiv2021

A Soft-Aided Staircase Decoder Using Three-Level Channel Reliabilities

The soft-aided bit-marking (SABM) algorithm is based on the idea of marking bits as highly reliable bits (HRBs), highly unreliable bits (HUBs), and uncertain bits to improve the performance of hard-decision (HD) decoders. The HRBs and HUBs are used to assist the HD decoders to prevent miscorrections and to decode those originally uncorrectable cases via bit flipping (BF), respectively. In this paper, an improved SABM algorithm (called iSABM) is proposed for staircase codes (SCCs). Similar to the SABM, iSABM marks bits with the help of channel reliabilities, i.e., using the absolute values of the log-likelihood ratios. The improvements offered by iSABM include: (i) HUBs being classified using a reliability threshold, (ii) BF randomly selecting HUBs, and (iii) soft-aided decoding over multiple SCC blocks. The decoding complexity of iSABM is comparable of that of SABM. This is due to the fact that on the one hand no sorting is required (lower complexity) because of the use of a threshold for HUBs, while on the other hand multiple SCC blocks use soft information (higher complexity). Additional gains of up to 0.53 dB with respect to SABM and 0.91 dB with respect to standard SCC decoding at a bit error rate of $10^{-6}$ are reported. Furthermore, it is shown that using 1-bit reliability marking, i.e., only having HRBs and HUBs, only causes a gain penalty of up to 0.25 dB with a significantly reduced memory requirement.

cs.IT↗
arXiv2021

Frequency Logarithmic Perturbation on the Group-Velocity Dispersion Parameter with Applications to Passive Optical Networks

Signal propagation in an optical fiber can be described by the nonlinear Schrödinger equation (NLSE). The NLSE has no known closed-form solution, mostly due to the interaction of dispersion and nonlinearities. In this paper, we present a novel closed-form approximate model for the nonlinear optical channel, with applications to passive optical networks. The proposed model is derived using logarithmic perturbation in the frequency domain on the group-velocity dispersion (GVD) parameter of the NLSE. The model can be seen as an improvement of the recently proposed regular perturbation (RP) on the GVD parameter. RP and logarithmic perturbation (LP) on the nonlinear coefficient have already been studied in the literature, and are hereby compared with RP on the GVD parameter and the proposed LP model. As an application of the model, we focus on passive optical networks. For a 20 km PON at 10 Gbaud, the proposed model improves upon LP on the nonlinear coefficient by 1.5 dB. For the same system, a detector based on the proposed LP model reduces the uncoded bit-error-rate by up to 5.4 times at the same input power or reduces the input power by 0.4 dB at the same information rate.

eess.SP↗
arXiv2021

Temporal Energy Analysis of Symbol Sequences for Fiber Nonlinear Interference Modelling via Energy Dispersion Index

The stationary statistical properties of independent, identically distributed (i.i.d.) input symbols provide insights on the induced nonlinear interference (NLI) during fiber transmission. For example, kurtosis is known to predict the modulation format-dependent NLI. These statistical properties can be used in the design of probabilistic amplitude shaping (PAS), which is a popular scheme that relies on an amplitude shaper for increasing spectral efficiencies of fiber-optic systems. One property of certain shapers used in PAS -- including constant-composition distribution matchers -- that is often overlooked is that a time-dependency between amplitudes is introduced. This dependency results in symbols that are non-i.i.d., which have time-varying statistical properties. Somewhat surprisingly, the effective signal-to-noise ratio (SNR) in PAS has been shown to increase when the shaping blocklength decreases. This blocklength dependency of SNR has been attributed to time-varying statistical properties of the symbol sequences, in particular, to variation of the symbol energies. In this paper, we investigate the temporal energy behavior of symbol sequences, and introduce a new metric called energy dispersion index (EDI). EDI captures the time-varying statistical properties of symbol energies. Numerical results show strong correlations between EDI and effective SNR, with absolute correlation coefficients above 99% for different transmission distances.

cs.IT↗
arXiv2021

Analysis and Experimental Demonstration of Orthant-Symmetric Four-dimensional 7 bit/4D-sym Modulation for Optical Fiber Communication

We propose a new four-dimensional orthant-symmetric 128-ary modulation format (4D-OS128) with a spectral efficiency of 7bit/4D-sym. The proposed format fills the gap between polarization-multiplexed 8- and 16-ary quadrature-amplitude modulation (PM-8QAM and PM-16QAM).Numerical simulations show that 4D-OS128 outperforms two well-studied 4D geometrically-shaped modulation formats: 128SP-16QAM and 7b4D-2A8PSK by up to 0.65dB for bit-interleaved coded modulation at the same spectral efficiency. These gains are experimentally demonstrated in a 11$\times$233Gbit/s wavelength division multiplexing (WDM) transmission system operating at 5.95 bit/4D-sym over 6000km and 9000km for both EDFA-only and hybrid amplification scenarios, respectively. A reach increase of 15% is achieved with respect to 128-ary set-partitioning 16QAM. Furthermore, the proposed 4D-OS128 is also compared to $\boldsymbol{D}_4$ lattice-based constellation and probabilistically-shaped 16QAM with finite blocklength via simulation.

eess.SP↗
arXiv2020

An Improved Model of Nonlinear Fiber Propagation in the Presence of Kerr Nonlinearity and Stimulated Raman Scattering

Ultra-wideband fiber optical transmission suffers from both Kerr nonlinearity and stimulated Raman scattering (SRS). Mathematical models that address the interplay between Kerr nonlinearity and SRS exist. These models are based on the Gaussian-noise (GN) and enhanced Gaussian noise (EGN) models. In this paper, we propose a modulation-format-dependent model, accounting for an enhanced link function, which is valid for non-identical spans where the fiber span loss and SRS gain/loss are not necessarily compensated for by the amplifier at the end of each span. A new signal power profile is also introduced, comprising the frequency-dependent fiber attenuation. The proposed analytical model takes all terms of nonlinear interference (NLI), including self-channel interference, cross-channel interference, and multi-channel interference, into account. It is also shown that the proposed model has the power to predict the NLI power with greater precision than the previous models can. Split-step Fourier simulations indicate that when both SRS and arbitrary modulation formats are considered, previous models may inaccurately predict the NLI power. This difference could be up to 4.3 dB for a 10.011 THz system with 1001 channels at 10 Gbaud.

eess.SP↗