arXiv Science⌕ Search

arXiv subjects

Alex Alvarado

Publications and source records attributed to Alex Alvarado.

At least 37 records · Page 2Linked to original sources

Physics-Aware Initialization Refinement in Code-Aided EM for Blind Channel Estimation

This paper addresses the well-known local maximum problem of the expectation-maximization (EM) algorithm in blind intersymbol interference (ISI) channel estimation. This problem primarily results from phase and shift ambiguity during initialization, which blind estimation is inherently unable to distinguish. We propose an effective initialization refinement algorithm that utilizes the decoder output as a model selection metric, incorporating a technique to detect phase and shift ambiguity. Our results show that the proposed algorithm significantly reduces the number of local maximum cases to nearly one-third for a 3-tap ISI channel under highly uncertain initial conditions. The improvement becomes more pronounced as initial errors increase and the channel memory grows. When used in a turbo equalizer, the proposed algorithm is required only in the first turbo iteration, which limits any complexity increase with subsequent iterations.

eess.SP↗

On the Capacity of Correlated Phase-Noise Channels: An Electro-Optic Frequency Comb Example

The capacity of a discrete-time channel with correlated phase noises is investigated. In particular, the electro-optic frequency comb system is considered, where the phase noise of each subchannel is a combination of two independent Wiener phase-noise sources. Capacity upper and lower bounds are derived for this channel and are compared with lower bounds obtained by numerically evaluating the achievable information rates using quadrature amplitude modulation constellations. Capacity upper and lower bounds are provided for the high signal-to-noise ratio (SNR) regime. The multiplexing gain (pre-log) is shown to be $M-1$, where $M$ represents the number of subchannels. A constant gap between the asymptotic upper and lower bounds is observed, which depends on the number of subchannels $M$. For the specific case of $M=2$, capacity is characterized up to a term that vanishes as the SNR grows large.

cs.IT↗

On Error Rate Approximations for FSO Systems with Weak Turbulence and Pointing Errors

Atmospheric attenuation, atmospheric turbulence, geometric spread, and pointing errors, degrade the performance of free-space optical transmission. In the weak turbulence regime, the probability density function describing the distribution of the channel fading coefficient that models these four effects is known in the literature. This function is an integral equation, which makes it difficult to find simple analytical expressions of important performance metrics such as the bit error rate (BER) and symbol error rate (SER). In this paper, we present simple and accurate approximations of the average BER and SER for pulse-amplitude modulation (PAM) in the weak turbulence regime for an intensity modulation and direct detection system. Our numerical results show that the proposed expressions exhibit excellent accuracy when compared against Monte Carlo simulations. To demonstrate the usefulness of the developed approximations, we perform two asymptotic analyses. First, we investigate the additional transmit power required to maintain the same SER when the spectral efficiency increases by 1 bit/symbol. Second, we study the asymptotic behavior of our SER approximation for dense PAM constellations and high transmit power.

eess.SP↗

Beyond 200 Gb/s/lane: An Analytical Approach to Optimal Detection in Shaped IM-DD Optical Links with Relative Intensity Noise

Next-generation intensity-modulation (IM) and direct-detection (DD) systems used in data centers are expected to operate at 400 Gb/s/lane and beyond. Such rates can be achieved by increasing the system bandwidth or the modulation format, which in turn requires maintaining or increasing the signal-to-noise ratio (SNR). Such SNR requirements can be achieved by increasing the transmitted optical power. This increase in optical power causes the emergence of relative intensity noise (RIN), a signal-dependent impairment inherent to the transmitter laser, which ultimately limits the performance of the system. In this paper, we develop an analytical symbol error rate (SER) expression for the optimal detector for the IM-DD optical link under study. The developed expression takes into account the signal-dependent nature of RIN and does not make any assumptions on the geometry or probability distribution of the constellation. Our expression is therefore applicable to general probabilistically and/or geometrically shaped systems. Unlike results available in the literature, our proposed expression provides a perfect match to numerical simulations of probabilistic and geometrically shaped systems.

eess.SP↗

On the Optimality of Single-label and Multi-label Neural Network Decoders

We investigate the design of two neural network (NN) architectures recently proposed as decoders for forward error correction: the so-called single-label NN (SLNN) and multi-label NN (MLNN) decoders. These decoders have been reported to achieve near-optimal codeword- and bit-wise performance, respectively. Results in the literature show near-optimality for a variety of short codes. In this paper, we analytically prove that certain SLNN and MLNN architectures can, in fact, always realize optimal decoding, regardless of the code. These optimal architectures and their binary weights are shown to be defined by the codebook, i.e., no training or network optimization is required. Our proposed architectures are in fact not NNs, but a different way of implementing the maximum likelihood decoding rule. Optimal performance is numerically demonstrated for Hamming $(7,4)$, Polar $(16,8)$, and BCH $(31,21)$ codes. The results show that our optimal architectures are less complex than the SLNN and MLNN architectures proposed in the literature, which in fact only achieve near-optimal performance. Extension to longer codes is still hindered by the curse of dimensionality. Therefore, even though SLNN and MLNN can perform maximum likelihood decoding, such architectures cannot be used for medium and long codes.

eess.SP↗

Robust Blind Channel Estimation for Bursty Impulsive Noise with a Constrained EM Approach

Impulsive noise (IN) commonly generated by power devices can severely degrade the performance of high sensitivity wireless receivers. Accurate channel state information (CSI) knowledge is essential for designing optimal maximum a posteriori detectors. This paper examines blind channel estimation methods based on the expectation-maximization (EM) algorithm tailored for scenarios impacted by bursty IN, which can be described by the Markov-Middleton model. We propose a constrained EM algorithm that exploits the trellis structure of the IN model and the transmitted binary phase shift keying (BPSK) symbols. By enforcing shared variance among specific trellis states and symmetry in the transition matrix, the proposed constrained EM algorithm adapted for the bursty IN channel has an almost two times faster convergence rate and better estimation performance than the standard EM approach. We comprehensively evaluate the robustness of both standard and constrained EM estimators under different types of CSI uncertainties. The results indicate that the final estimations of both EM estimators are robust enough to mismatch Markov-Middleton model parameters. However, as the level of CSI uncertainty increases, the convergence rate decreases.

eess.SP↗

Rate-adaptive Reconciliation for Experimental Continuous-variable Quantum Key Distribution with Discrete Modulation over a Free-space Optical Link

Continuous-variable quantum key distribution (CV-QKD) has been proposed as a method for securely exchanging keys to protect against the security concerns caused by potential advancements in quantum computing. In addition to optical fibre transmission, the free-space optical (FSO) channel is an interesting channel for CV-QKD, as it is possible to share keys over this channel wirelessly. The instability of the FSO channel caused by turbulence-induced fading, however, can cause a degradation in the system's performance. One of the most important aspects of CV-QKD is the reconciliation step, which significantly impacts the performance of the CV-QKD system. Hence, rate-adaptive reconciliation is necessary for CV-QKD over FSO to combat the fluctuations in the channel and improve secret key rates (SKRs). Therefore, in this paper, we simulate the impact of discrete modulation on the reconciliation efficiency and consider the use of $d$-dimensional reconciliation with $d > 8$ to mitigate this impact, improving reconciliation efficiencies by up to 3.4%. We validate our results by experimentally demonstrating CV-QKD over a turbulent FSO link and demonstrate SKR gains by up to 165%. Furthermore, we optimise the reconciliation efficiency for FSO links, achieving additional SKR gains of up to 7.6%.

quant-ph↗

Modified Baum-Welch Algorithm for Joint Blind Channel Estimation and Turbo Equalization

Blind estimation of intersymbol interference channels based on the Baum-Welch (BW) algorithm, a specific implementation of the expectation-maximization (EM) algorithm for training hidden Markov models, is robust and does not require labeled data. However, it is known for its extensive computation cost, slow convergence, and frequently converges to a local maximum. In this paper, we modified the trellis structure of the BW algorithm by associating the channel parameters with two consecutive states. This modification enables us to reduce the number of required states by half while maintaining the same performance. Moreover, to improve the convergence rate and the estimation performance, we construct a joint turbo-BW-equalization system by exploiting the extrinsic information produced by the turbo decoder to refine the BW-based estimator at each EM iteration. Our experiments demonstrate that the joint system achieves convergence in 10 EM iterations, which is 8 iterations less than a separate system design for a signal-to-noise ratio (SNR) of 4dB. Additionally, the joint system provides improved estimation accuracy with a mean square error (MSE) of $10^{-4}$ for an SNR of 6dB. We also identify scenarios where a joint design is not preferable, especially when the channel is noisy (e.g., SNR=2dB) and the decoder cannot provide reliable extrinsic information for a BW-based estimator.

eess.SP↗

On the Design and Performance of Machine Learning Based Error Correcting Decoders

This paper analyzes the design and competitiveness of four neural network (NN) architectures recently proposed as decoders for forward error correction (FEC) codes. We first consider the so-called single-label neural network (SLNN) and the multi-label neural network (MLNN) decoders which have been reported to achieve near maximum likelihood (ML) performance. Here, we show analytically that SLNN and MLNN decoders can always achieve ML performance, regardless of the code dimensions -- although at the cost of computational complexity -- and no training is in fact required. We then turn our attention to two transformer-based decoders: the error correction code transformer (ECCT) and the cross-attention message passing transformer (CrossMPT). We compare their performance against traditional decoders, and show that ordered statistics decoding outperforms these transformer-based decoders. The results in this paper cast serious doubts on the application of NN-based FEC decoders in the short and medium block length regime.

eess.SP↗

On the Robustness of Deep Learning-aided Symbol Detectors to Varying Conditions and Imperfect Channel Knowledge

Recently, a data-driven Bahl-Cocke-Jelinek-Raviv (BCJR) algorithm tailored to channels with intersymbol interference has been introduced. This so-called BCJRNet algorithm utilizes neural networks to calculate channel likelihoods. BCJRNet has demonstrated resilience against inaccurate channel tap estimations when applied to a time-invariant channel with ideal exponential decay profiles. However, its generalization capabilities for practically-relevant time-varying channels, where the receiver can only access incorrect channel parameters, remain largely unexplored. The primary contribution of this paper is to expand upon the results from existing literature to encompass a variety of imperfect channel knowledge cases that appear in real-world transmissions. Our findings demonstrate that BCJRNet significantly outperforms the conventional BCJR algorithm for stationary transmission scenarios when learning from noisy channel data and with imperfect channel decay profiles. However, this advantage is shown to diminish when the operating channel is also rapidly time-varying. Our results also show the importance of memory assumptions for conventional BCJR and BCJRNet. An underestimation of the memory largely degrades the performance of both BCJR and BCJRNet, especially in a slow-decaying channel. To mimic a situation closer to a practical scenario, we also combined channel tap uncertainty with imperfect channel memory knowledge. Somewhat surprisingly, our results revealed improved performance when employing the conventional BCJR with an underestimated memory assumption. BCJRNet, on the other hand, showed a consistent performance improvement as the level of accurate memory knowledge increased.

cs.IT↗

Introducing 4D Geometric Shell Shaping for Mitigating Nonlinear Interference Noise

Four dimensional geometric shell shaping (4D-GSS) is introduced as an approach for closing the nonlinearity-caused shaping gap. This format is designed at the spectral efficiency of 8 b/4D-sym and is compared against polarization-multiplexed 16QAM (PM-16QAM) and probabilistically shaped PM-16QAM (PS-PM-16QAM) in a 400ZR-compatible transmission setup with high amount of nonlinearities. Reach increase and nonlinearity tolerance are evaluated in terms of achievable information rates and post-FEC bit-error rate. Numerical simulations for a single-span, single-channel show that 4D-GSS achieves increased nonlinear tolerance and reach increase against PM-16QAM and PS-PM-16QAM when optimized for bit-metric decoding (RBMD). In terms of RBMD, gains are small with a reach increase of 1.7% compared to PM-16QAM. When optimizing for mutual information, a larger reach increase of 3% is achieved compared to PM-16QAM. Moreover, the introduced GSS scheme provides a scalable framework for designing well-structured 4D modulation formats with low complexity.

eess.SP↗

Analytical Model of Nonlinear Fiber Propagation for General Dual-Polarization Four-Dimensional Modulation Format

Coherent dual-polarization (DP) optical transmission systems encode information on the four available degrees of freedom of an optical field: the two polarization states, each with two quadrature components. Such systems naturally operate based on a four-dimensional (4D) signal space. Having a general analytical model to accurately estimate nonlinear interference (NLI) is key to analyze such transmission systems as well as to study how different DP-4D formats are affected by NLI. However, the available models in the literature are not completely general. They either do not apply to the entire DP-4D formats or do not consider all the NLI contributions. In this paper, we develop a model that applies to all DP-4D modulation formats with independent symbols. Our model takes self-channel interference, cross-channel interference and multiple-channel interference effects into account. As an application of our model, we further study the effects of signal-noise interactions in long-haul transmission via the proposed model. When compared to previous results in the literature, our model is more accurate at predicting the contribution of NLI for both low and high dispersion fibers in single- and multi-channel transmission systems. For the NLI, we report an average gap from split step Fourier simulation results below 0.15 dB. The simulation results further show that by considering signal-noise interactions, the proposed model in long-haul transmission can reduce the transmission reach prediction error by 4%.

eess.SP↗

Low-Complexity Soft-Decision Detection for Combating DFE Burst Errors in IM/DD Links

The deployment of non-binary pulse amplitude modulation (PAM) and soft decision (SD)-forward error correction (FEC) in future intensity-modulation (IM)/direct-detection (DD) links is inevitable. However, high-speed IM/DD links suffer from inter-symbol interference (ISI) due to bandwidth-limited hardware. Traditional approaches to mitigate the effects of ISI are filters and trellis-based algorithms targeting symbol-wise maximum a posteriori (MAP) detection. The former approach includes decision-feedback equalizer (DFE), and the latter includes Max-Log-MAP (MLM) and soft-output Viterbi algorithm (SOVA). Although DFE is easy to implement, it introduces error propagation. Such burst errors distort the log-likelihood ratios (LLRs) required by SD-FEC, causing performance degradation. On the other hand, MLM and SOVA provide near-optimum performance, but their complexity is very high for high-order PAM. In this paper, we consider a one-tap partial response channel model, which is relevant for high-speed IM/DD links. We propose to combine DFE with either MLM or SOVA in a low-complexity architecture. The key idea is to allow MLM or SOVA to detect only 3 typical DFE symbol errors, and use the detected error information to generate LLRs in a modified demapper. The proposed structure enables a tradeoff between complexity and performance: (i) the complexity of MLM or SOVA is reduced and (ii) the decoding penalty due to error propagation is mitigated. Compared to SOVA detection, the proposed scheme can achieve a significant complexity reduction of up to 94% for PAM-8 transmission. Simulation and experimental results show that the resulting SNR loss is roughly 0.3 to 0.4 dB for PAM-4, and becomes marginal 0.18 dB for PAM-8.

eess.SP↗