arXiv Science⌕ Search

arXiv subjects

Alex Alvarado

Publications and source records attributed to Alex Alvarado.

At least 19 recordsLinked to original sources
arXiv2026

Low-complexity Soft-decision LLR Calculations for Next-generation IM-DD Systems with RIN

The demand for higher speeds in intra-data center interconnects will eventually require high-order pulse amplitude modulation (PAM) combined with soft-decision (SD) forward error correction (FEC). The laser relative intensity noise (RIN) is an important noise impairment that limits the performance of high-speed intensity-modulation (IM) and direct-detection (DD) systems, as it induces a channel with signal-dependent noise. In this paper, we show that an accurate calculation of the log-likelihood ratios (LLRs) is critical for the performance of the SD-FEC decoder in RIN-dominated IM-DD systems. First, we show that assuming signal-independent additive white Gaussian noise (AWGN) statistics to compute LLRs results in a significant penalty in performance. As an alternative, we propose a low-complexity piecewise linear approximation of the exact LLRs for PAM-4 and PAM-8. We show using the generalized mutual information that our approximation results in no performance loss versus using exact LLRs, unlike the AWGN-like assumption. Furthermore, we validate the analysis with bit error rate (BER) performance of SD decoding. We show that our approximation matches the BERs achieved using exact LLRs. Therefore, our approximation avoids a BER penalty of up to 7.2 times using an extended Hamming code, and up to 2.41 dB of optical modulation amplitude penalty using low-density parity-check codes for the same target BER.

eess.SP↗
arXiv2026

Statistical Characterization and Block-EM Estimation of Frequency-Domain NSI for OFDM Systems in Bursty Impulsive Noise

Impulsive noise (IN), characterized by its high power and non-Gaussian distribution, poses a critical challenge in modern orthogonal frequency-division multiplexing (OFDM) systems, driven by the proliferation of electronic devices. Current IN mitigation techniques rely heavily on time-domain processing. These methods are applied before the discrete Fourier transform (DFT), introducing additional complexity, failing to align with OFDM's inherent frequency-domain processing flow, and risking the destruction of subcarrier orthogonality due to imperfect IN subtraction. To address these limitations, we propose a frequency-domain, block-based framework for mitigating IN. The statistical representation of IN in the frequency domain is first derived using a transformed Gaussian mixture model. Based on this model, we develop an optimal receiver that leverages perfect noise state information (NSI), thereby identifying scenarios in which NSI is critical. We then propose an unsupervised block-based expectation-maximization (EM) framework for NSI estimation and develop three variants for evaluation. These include a simple symbol-by-symbol variance-updated EM, a sequence-based transition-updated EM, and a MAP-based EM that exploits a sparsity-promoting prior to automatically prune the number of states. Our frequency-domain design operates after the DFT, seamlessly integrates with the OFDM processing chain, preserves subcarrier orthogonality, and leverages the known IN block structure to achieve substantial performance gains without the immense complexity of time-domain impulse reconstruction.

eess.SP↗
arXiv2026

High-throughput Low-latency Hardware Implementation of BCH Decoders

Two well-known decoding algorithms for BCH codes are conventional decoding, based on the Berlekamp-Massey algorithm in combination with Chien search, and direct decoding, which uses direct solutions to find the error locator polynomial and its roots. We introduce hardware architectures for conventional and direct decoding of extended BCH codes. Both architectures support implementation for any blocklength. Our conventional decoder supports any error-correction capability, whereas direct decoding is supported up to error correcting capability t = 4. To the best of our knowledge, our work is the first to implement a direct BCH decoder with an error-correction capability 4. We synthesize for the Xilinx Ultrascale+ XCZU48DR field-programmable gate-array and 16 nm FinFET for blocklengths up to 1024 bits and t = 4. We show that the direct decoder outperforms the conventional decoder in area efficiency for t = 2, t = 3, and for t = 4 for blocklengths longer than 256. Post-synthesis results for 16 nm FinFET show codeword per clock-cycle throughput at 1 GHz, achieving 239 Gb/s for the (256, 239) eBCH code and 223 Gb/s for (256, 223) eBCH code at 2 ns and 8 ns latency, respectively.

cs.IT↗
arXiv2026

Maximum Coverage Chase Decoder for Optical Interconnects

We propose a low-complexity Chase decoder for optical interconnects that formulates test pattern selection as a generalized maximum coverage problem. For concatenated RS-BCH and oFEC codes, our decoder achieves the standard Chase decoding performance with 25% and 61.3% fewer test patterns, respectively.

cs.IT↗
arXiv2026

Syndrome Adaptive Gain Control for Min-Sum Decoding of Quantum LDPC Codes

Min-Sum (MS) decoding is a popular low-complexity alternative to belief propagation (BP), retaining only the minimum incoming message magnitude during check-node (CN) processing, at the cost of systematic message magnitude overestimation. The scaled MS (SMS) decoder compensates for this effect using a fixed scaling factor. We propose the syndrome adaptive gain Min-Sum (SAGMS) decoder for quantum low-density parity-check (QLDPC) codes, which adapts the message gain online based on the fraction of unsatisfied stabilizers, requiring no per-code or per-noise level optimization. We show that the scaling factor required for SMS to match belief propagation decreases with the CN degree, so any fixed scaling optimized for one degree incurs into a growing penalty as the CN degree varies. SAGMS avoids this limitation by adapting the gain during decoding. Simulations on generalized bicycle QLDPC codes demonstrate that SAGMS matches or outperforms the frame error rate (FER) of an offline optimized SMS decoder. Moreover, SAGMS approaches BP performance and, under certain conditions outperforms it while retaining MS-level complexity.

cs.IT↗
arXiv2026

The Memory-Enhanced Gaussian Noise (MEGN) Model for Fiber-Optic Channels

The enhanced Gaussian noise (EGN) model is widely used for estimating the nonlinear interference (NLI) power accumulated in coherent fiber-optic transmission systems. Given a fixed fiber link, under the assumption that transmitted symbols are independent and identically distributed (i.i.d.), the EGN model establishes that the NLI power depends on time-invariant signal statistics, i.e., the second-, fourth-, and sixth-order moments of the symbols, which are determined by the modulation format and its probability distribution. However, recent advances in coded modulation have sought to mitigate NLI by introducing controlled temporal correlations among transmitted symbols, thereby violating the i.i.d. assumption underlying the EGN model. Among these correlations, symbol energy correlations are believed to exert the most significant influence on NLI. This work presents a rigorous mathematical derivation of a memory extension of the EGN model that explicitly accounts for symbol energy correlations, referred to as the MEGN model. The proposed MEGN model is validated through both numerical simulations and transmission experiments. Normalized average NLI power estimations with less than 5% errors across a wide range of symbol rates and transmission distances are reported. The model also provides a theoretical framework for analyzing and optimizing optical transmission systems employing temporally correlated modulation schemes.

eess.SP↗
arXiv2026

Optical Communications with Relative Intensity Noise: Channel Modeling and Information Rates

We consider optical communications with intensity modulation and direct detection affected by laser relative intensity noise (RIN). Starting from a continuous-time waveform model, we derive an equivalent discrete-time channel model. As a result of RIN, the resulting channel model exhibits signal-dependent noise with memory. Unlike the commonly-assumed model in the literature, the conditional variance of this noise term has a polynomial dependence on the symbol of interest. Finally, we study achievable information rates for this channel under practically-relevant system parameters. We take a mismatched decoding approach and compute the generalized mutual information (GMI) using a memoryless decoding metric. Our numerical results show that when the memory in the channel is ignored by the receiver, GMI saturates as the constellation size increases, and thus, dense constellations do not offer gains. We also show that this saturation results from nonsymmetric nonvanishing contributions of the symbols to the GMI.

cs.IT↗
arXiv2026

On LLR Mismatch in Belief Propagation Decoding of Overcomplete QLDPC Codes

Belief propagation (BP) decoding of quantum low density parity check (QLDPC) codes is often implemented using overcomplete stabilizer (OS) representations, where redundant parity checks are introduced to improve finite length performance. Decoder behavior for such representations is governed primarily by finite iteration dynamics rather than asymptotic code properties. These dynamics are known to critically depend on the initialization of the decoder. In this paper, we investigate the impact of mismatched log likelihood ratios (LLRs) used for BP initialization on the performance of QLDPC codes with OS representations. Our results demonstrate that initial LLR mismatch has a strong influence on the frame error rate (FER), particularly in the low noise regime. We also show that the optimal performance is not sharply localized: the FER remains largely insensitive over an extended region of mismatched LLRs. This behavior motivates an interpretation of LLR mismatch as a regularization control parameter rather than a quantity that must be precisely matched to the quantum channel.

cs.IT↗
arXiv2026

A Fully Open-source Implementation of an Analog 8-PAM Demapper for High-speed Communications

Spectrally-efficient communication systems rely on the use of multi-level modulation formats. At the receiver side, a demodulator is often used to extract soft information about the transmitted bits. Such a demodulator is typically implemented in the digital domain. However, analog implementations of such demodulators are also possible. In this paper, we design and simulate an analog 8-ary pulse-amplitude modulation (8-PAM) demapper in IHP SG13G2 SiGe BiCMOS technology. We generalize and improve a design available in the literature for 4-PAM. A fully MOSFET-based 8-PAM design is proposed. Our simulations and design are completely based on open-source IC design tools. Our results show an energy efficiency of 0.33 pJ/bit for a data rate of 1Gbit/s.

eess.SP↗
arXiv2025

Phase-Aware Code-Aided EM Algorithm for Blind Channel Estimation in PSK-Modulated OFDM

This paper presents a fully blind phase-aware expectation-maximization (EM) algorithm for OFDM systems with the phase-shift keying (PSK) modulation. We address the well-known local maximum problem of the EM algorithm for blind channel estimation. This is primarily caused by the unknown phase ambiguity in the channel estimates, which conventional blind EM estimators cannot resolve. To overcome this limitation, we propose to exploit the extrinsic information from the decoder as model evidence metrics. A finite set of candidate models is generated based on the inherent symmetries of PSK modulation, and the decoder selects the most likely candidate model. Simulation results demonstrate that, when combined with a simple convolutional code, the phase-aware EM algorithm reliably resolves phase ambiguity during the initialization stage and reduces the local convergence rate from 80% to nearly 0% in frequency-selective channels with a constant phase ambiguity. The algorithm is invoked only once after the EM initialization stage, resulting in negligible additional complexity during subsequent turbo iterations.

eess.SP↗
arXiv2025

Blind Turbo Demodulation for Differentially Encoded OFDM with 2D Trellis Decomposition

Digital Audio Broadcasting (DAB)-like systems employ differentially encoded (DE) phase-shift keying (PSK) for transmission. While turbo-DE-PSK receivers offer substantial performance gains through iterative decoding by making the DE-PSK an inner code, they rely on accurate channel estimation without pilots, which is a key challenge in DAB-like scenarios. This paper develops a fully blind turbo-DE-PSK scheme that jointly estimates channel phase, channel gain, and noise variance directly from the received signal. The design leverages a two-dimensional (2D) trellis decomposition for blind phase estimation, complemented by power-based estimators for channel gain and noise variance. We provide a comprehensive system assessment across practical system parameters, including inner code length, phase quantization, and 2D block size. Simulation results show that the blind 2D turbo demodulator approaches the performance of receivers with perfect channel knowledge and remains robust under realistic transmission conditions.

eess.SP↗