arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2610.32553

Modification of optical properties in ultrathin ALD-grown NbN layers using oxygen plasma treatment

Mustafa Teke·Nitesh Yerra·Alireza Sadeghi·Mario Ziegler·Detlef Born·Nan Du·Marco Diegel·Uwe Hübner·Sahitya V. Vegesna·Heidemarie Krüger
View original source ↗Read source document ↗Export metadata ↓

Abstract

NbN thin films with a nominal thickness of 10 nm were grown by atomic layer deposition (ALD) on Al$_2$O$_3$-buffered Si substrates and treated with oxygen plasma for 0 s (untreated), 20 s, 40 s, and 60 s to investigate oxygen-induced changes in their optical properties. Spectroscopic ellipsometry (SE) measurements were performed before and after oxygen plasma treatment over the ultraviolet-visible-near-infrared (1.24-6.20 eV) and infrared (0.041-0.827 eV) spectral ranges. Film thickness determined by X-ray reflectivity (XRR) was used as a fixed parameter in the optical modeling to extract the dielectric function, optical constants, and effective free-carrier concentration. We observed the emergence of a distinct absorption feature near 4.9 eV following oxygen plasma treatment, consistent with the oxidation of the NbN surface and the resulting change in its optical properties. Increasing the treatment time from 0 to 60 s reduced the effective carrier concentration from $1.20 \times 10^{22}$ to $1.03 \times 10^{22}$ cm$^{-3}$ and the effective carrier mobility from 2.44 to 2.27 cm$^2$ V$^{-1}$ s$^{-1}$. The obtained results provide a basis for understanding the effects of oxygen plasma treatment on NbN thin films.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Mustafa Teke, Nitesh Yerra, Alireza Sadeghi, Mario Ziegler, Detlef Born, Nan Du, Marco Diegel, Uwe Hübner, Sahitya V. Vegesna, Heidemarie Krüger. 2026-10-23. Modification of optical properties in ultrathin ALD-grown NbN layers using oxygen plasma treatment. https://arxiv.org/abs/2610.32553

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Laser Melting and Loss of Interlayer Coherence of the Charge Density Wave Order in TiSe${_2}$ observed by time-resolved neutron diffraction

Time-resolved elastic neutron scattering combined with laser-induced heating was used to probe the evolution of the periodic lattice distortion (PLD) associated with charge-density-wave (CDW) order in 1T-TiSe$_{2}$. Upon pulsed laser heating, the crystal undergoes a phase transition, where the transient response of the average lattice is isotropic. In contrast, the PLD exhibits an anisotropic behavior. The superlattice intensity is rapidly suppressed in-plane and out-of-plane upon heating, consistent with melting of the ordered state, but recovers more quickly in-plane than along the c-axis as the sample cools below the CDW transition temperature. The out-of-plane component shows pronounced broadening due to reduction of the interlayer correlation length while the in-plane correlations recover. The disparity between the nearly isotropic lattice response and the anisotropic recovery of the superlattice demonstrates that the CDW dynamics cannot be described solely by the evolution of the average lattice temperature. Instead, the results indicate that interlayer phase coherence represents the slowest-relaxing component of the ordered state. These findings support a picture in which the CDW instability is established primarily within the 1T-TiSe${_2}$ layers, while three-dimensional long-range order depends on weaker coupling between layers. More broadly, they demonstrate how direction-resolved time-resolved neutron diffraction can disentangle thermal and correlation-driven contributions to CDW dynamics in low-dimensional materials.

cond-mat.mtrl-sci↗
arXiv2026

AtomMOF: All-Atom Flow Matching for MOF-Adsorbate Structure Prediction

Metal-organic frameworks (MOFs) are promising materials for applications such as direct air capture, where performance depends on how adsorbates bind within the framework. Accurately predicting MOF-adsorbate configurations is therefore important for screening candidate materials. However, traditional approaches are computationally expensive and require a known host structure, while existing generative models rely on rigid-body assumptions and do not explicitly model adsorbates. We introduce AtomMOF, a scalable all-atom flow-matching model that jointly predicts MOF-adsorbate structures from discrete building blocks and adsorbates. Built on a Diffusion Transformer with a building block-based pairwise attention bias, AtomMOF operates in an unconstrained all-atom space and exhibits clear scaling behavior. To improve the structural validity of flexible all-atom models, we also propose Feynman-Kac (FK) steering with machine-learned interatomic potentials (MLIPs). On the BW dataset, AtomMOF achieves a 58.17% relative increase in match rate and a 31.84% relative reduction in RMSD compared with prior work. MLIP-guided steering further improves validity by 28.7% and reduces formation energy error by 86.5%. On ODAC25, AtomMOF generates adsorption configurations faster than GCMC and, when combined with MLIP relaxation, identifies lower-energy configurations than those in the reference dataset.

cond-mat.mtrl-sci↗
arXiv2026

Limitations of Debye-Waller lattice temperature extraction under electronic excitation

Ultrafast diffraction is the cutting-edge technique to extract the atomic temperature at femtosecond timescales, and further related quantities - in particular, electron-phonon coupling strength at elevated electronic temperatures. The present work demonstrates limitations of such an analysis, emphasizing the importance of careful evaluation of the evolution of the Debye temperature. It is shown that, due to the sensitivity of the Debye-Waller analysis to this parameter, neglecting its changes under electronic excitation may lead to significant deviations of the atomic temperature extracted from its true values.

cond-mat.mtrl-sci↗