arXiv Science⌕ Search
Home/Archive/arXiv

arXiv · 2609.37075

Defect-controlled electrical and optical properties of CrN thin films: experiment and first-principles study

J. Bulíř·U. D. Wdowik·J. More-Chevalier·P. Hubík·E. de Prado·M. Vondráček·L. Fekete·M. Novotný·J. Lančok·D. Legut
View original source ↗Read source document ↗Export metadata ↓

Abstract

Thin chromium nitride (CrN) films were deposited by RF magnetron sputtering in a reactive atmosphere of Ar-N$_2$ on fused silica and MgO (001) substrates at temperatures between 400 $^o$C and 800 $^o$C. The influence of nitrogen content and substrate temperature on structural, electrical, and optical properties was systematically investigated. The overstoichiometric CrN films exhibited a reduced resistivity below 6 m$Ω\cdot$cm with stable p-type behavior, while increasing the substrate temperature above 600 $^o$C induced a transition to n-type conductivity. Spectroscopic ellipsometry in the UV-Vis-NIR and infrared spectral ranges revealed a strong dependence of the dielectric function and the absorption edge on film stoichiometry and deposition conditions. Structural characterization using X-ray diffraction and atomic force microscopy confirmed substrate-dependent crystallinity and grain growth. Density functional theory calculations showed that cation and anion vacancies strongly modify the electronic structure and optical response, explaining the experimentally observed conductivity transitions. The results demonstrate that the deposition parameters provide an effective means to tailor CrN thin films via defect engineering.

Explore related subjects

cond-mat.mtrl-sci

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. Bulíř, U. D. Wdowik, J. More-Chevalier, P. Hubík, E. de Prado, M. Vondráček, L. Fekete, M. Novotný, J. Lančok, D. Legut. 2026-09-29. Defect-controlled electrical and optical properties of CrN thin films: experiment and first-principles study. https://arxiv.org/abs/2609.37075

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

arXiv2026

Investigation of Fe-Ag and Ag-Fe Interfaces in Ag-57Fe-Ag trilayer Using Nuclear Resonance Scattering under X-ray Standing Wave Conditions

Understanding the interfaces of layered nanostructures is key to optimizing their structural and magnetic properties for the desired functionality. In the present work, the two interfaces of a few nm thick Fe layer in Ag-57Fe-Ag trilayers are studied with a depth resolution of a fraction of a nanometer using x-ray standing waves (XSWs) generated by an underlying [W-Si]x10 multilayer (MLT) at an x-ray incident angle around the Bragg peak of the MLT. Interface selectivity in Ag-57Fe-Ag trilayers was achieved by moving XSW antinodes across the interfaces by optimizing suitable incident angles and performing depth-resolved nuclear resonance scattering (NRS) and X-ray fluorescence (XRF) measurements for magnetic and structural properties. The combined analysis revealed that the rms roughness of 57Fe-on-Ag and Ag-on-57Fe interfaces are not equal. The roughness of the 57Fe-on-Ag interface is 9.7 Angstrom, while that of the Ag-on-57Fe interface is 6.4 Angstrom. 57Fe isotope sensitive NRS revealed that hyperfine field (HFF) at both interfaces of 57Fe-on-Ag and Ag-on-57Fe interfaces are distinct, which is consistent with the difference in interface roughnesses measured as root mean square (RMS) roughness. Thermal annealing induces 57Fe diffusion into the Ag layer, and annealing at 325 C transforms the sample into a paramagnetic state. This behavior is attributed to forming 57Fe nanoparticles within the Ag matrix, exhibiting a paramagnetic nature. These findings provide deep insights into interface properties crucial for developing advanced nanostructures and spintronic devices.

cond-mat.mtrl-sci↗
arXiv2026

Strain-induced Dynamic Spin-Phonon Coupling in Epitaxial RuO2 Films

Magnetic order parameters in altermagnets can couple to quantized lattice vibration via both piezomagnetic and magnetoelastic effects, leading to the renormalization of phonon dispersion. Here, we demonstrate photo-induced dynamic frequency modulation of THz phonons excited in anisotropically-strained epitaxial RuO2 thin films using ultrafast coherent phonon spectroscopy and time-resolved magneto-optic Kerr effect measurement. A coherent oscillation of a transverse acoustic phonon appears in the sub-THz range with increasing film thickness above 4 nm due to local dislocation arising from the anisotropic strain relaxation, which hosts large non-zero shear strain. Interestingly, this phonon mode exhibits a time-varying mode hardening below ~ 500 K. Furthermore, an optical phonon oscillation emerges in magnetization dynamics of the photo-induced non-equilibrium state, and it becomes significantly softened near the critical temperature, while there is no observable magneto-optic signal in fully-strain-relaxed films. Such notable dynamic frequency modulations in acoustic and optical phonons offer an opportunity to manipulate phonons in the THz range through the spin-phonon coupling controlled by epitaxial design, which can inspire the new class of altermagnetic applications in the ultrafast quantum opto-spintronics.

cond-mat.mtrl-sci↗
arXiv2026

Al$_{1-x}$Hf$_{x}$N Thin Films with Enhanced Piezoelectric Responses for GHz Surface Acoustic Wave Devices

Ternary compounds obtained by alloying wurtzite AlN with transition metals have emerged as promising materials with significantly enhanced piezoelectric characteristics relative to binary AlN. The increased electromechanical coupling in these compounds boosts the performance of high-frequency acoustic devices. So far, progress has largely focused on Al$_{1-x}$Sc$_x$N, which is costly and poorly compatible with complementary metal-oxide-semiconductor (CMOS) technologies. Here, we investigate aluminum hafnium nitride (Al$_{1-x}$Hf$_{x}$N) as a scalable and potentially CMOS-compatible alternative to Al$_{1-x}$Sc$_x$N. Using reactive co-sputtering on both Si and sapphire substrates, we demonstrate wurtzite Al$_{1-x}$Hf$_{x}$N thin films ($x \leq 0.17$) with strong $c$-axis texture and nearly isotropic lattice expansion upon Hf incorporation. X-ray absorption spectroscopy indicates cross-gap hybridization between N 2$p$ and Hf 5$d$ states, which can enhance the Born effective charge and, thereby, the piezoelectric response. Correspondingly, we observe a multifold enhancement in the piezoelectric coefficient, $d_{33}$, relative to AlN, despite increasing structural disorder in Al$_{1-x}$Hf$_{x}$N. Building on this finding, we demonstrate Al$_{1-x}$Hf$_{x}$N GHz surface acoustic wave (SAW) resonators that exhibit enhanced performance, as well as efficient excitation of bulk acoustic waves with low propagation losses. These results establish Al$_{1-x}$Hf$_{x}$N as a promising platform for next-generation high-frequency electromechanical devices, with prospects for further piezoelectric enhancements through improved epitaxy.

cond-mat.mtrl-sci↗