arXiv ScienceSearch

arXiv · 2506.10931

MARS: Processing-In-Memory Acceleration of Raw Signal Genome Analysis Inside the Storage Subsystem

Abstract

Raw signal genome analysis (RSGA) has emerged as a promising approach to enable real-time genome analysis by directly analyzing raw electrical signals. However, rapid advancements in sequencing technologies make it increasingly difficult for software-based RSGA to match the throughput of raw signal generation. This paper demonstrates that while hardware acceleration techniques can significantly accelerate RSGA, the high volume of genomic data shifts the performance and energy bottleneck from computation to I/O data movement. As sequencing throughput increases, I/O overhead becomes the main contributor to both runtime and energy consumption. Therefore, there is a need to design a high-performance, energy-efficient system for RSGA that can both alleviate the data movement bottleneck and provide large acceleration capabilities. We propose MARS, a storage-centric system that leverages the heterogeneous resources within modern storage systems (e.g., storage-internal DRAM, storage controller, flash chips) alongside their large storage capacity to tackle both data movement and computational overheads of RSGA in an area-efficient and low-cost manner. MARS accelerates RSGA through a novel hardware/software co-design approach. First, MARS modifies the RSGA pipeline via two filtering mechanisms and a quantization scheme, reducing hardware demands and optimizing for in-storage execution. Second, MARS accelerates the RSGA steps directly within the storage by leveraging both Processing-Near-Memory and Processing-Using-Memory paradigms. Third, MARS orchestrates the execution of all steps to fully exploit in-storage parallelism and minimize data movement. Our evaluation shows that MARS outperforms basecalling-based software and hardware-accelerated state-of-the-art read mapping pipelines by 93x and 40x, on average across different datasets, while reducing their energy consumption by 427x and 72x.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Melina Soysal, Konstantina Koliogeorgi, Can Firtina, Nika Mansouri Ghiasi, Rakesh Nadig, Haiyu Mao, Geraldo F. Oliveira, Yu Liang, Klea Zambaku, Mohammad Sadrosadati, Onur Mutlu. 2025-07-03. MARS: Processing-In-Memory Acceleration of Raw Signal Genome Analysis Inside the Storage Subsystem. https://doi.org/10.1145/3721145.3730428

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related papers

A System Architecture for Low Latency Multiprogramming Quantum Computing

As quantum systems scale, multiprogramming quantum computing (MPQC) provides a practical way to improve device utilization and throughput. However, because quantum executables are device-dependent, non-portable across qubit regions, and highly susceptible to noise and crosstalk, current MPQC pipelines rely on expensive online compilation to co-optimize concurrently running programs. This online step dominates runtime and impedes low-latency deployments for practical, real-world workloads in the future, such as repeatedly invoked quantum neural network (QNN) services. We present FLAMENCO, a fidelity-aware multi-version compilation system that enables independent offline compilation and low-latency multiprogramming at runtime. \textbf{At the architecture level}, the system abstracts devices into compute units to reduce the search space of region allocation. \textbf{At compile time}, it generates diverse executable versions for each program---each bound to a distinct qubit region---allowing dynamic region selection at runtime and overcoming non-portability. \textbf{At runtime}, it employs a lightweight orchestrator that uses post-compilation fidelity metrics to avoid conflicts and mitigate crosstalk, supporting conflict-free co-execution without online co-optimization. Evaluations show that FLAMENCO achieves over 5$\times$ runtime speedup in post-scheduling execution while maintaining comparable execution fidelity on common-success workloads. When integrated into existing scheduler-coupled systems, it raises workload-level conflict-free orchestration ratio from 0.183 to 1.000 for HyperQ and from 0.050 to 0.400 for QOS.

cs.AR

HBFSim: Fast and Faithful Simulation of High-Bandwidth Flash Under Real GPU Execution

High-Bandwidth Flash (HBF) places high-capacity NAND beside HBM to relieve the memory-capacity bottleneck of LLM inference, yet its system-level behavior cannot be evaluated before hardware becomes available. Cycle-level GPU simulators are too slow for production-scale models. Trace replay has a further shortcoming: it cannot capture the allocation, migration, and execution changes induced by different HBM-HBF configurations. Our key insight is that HBF need not be evaluated by simulating the GPU: only the program-visible effects of HBF need to be modeled. And only a real LLM workload running on real hardware can answer the arguments about HBF. Hence the modeled service has to be injected into that running program, and the injection must not destroy the GPU concurrency that would hide the original I/O latency. We present HBFSim, an open-source HBF simulator that executes LLM workloads on a real GPU while modeling HBF timing, thermal, and other behaviors online. HBFSim rewrites the PTX of the workload's kernels and routes accesses inside a registered address range into the HBF simulator. It supports asynchronous TMA transfers and capacities beyond physical GPU memory. HBFSim leaves the model's run unaffected across ordinary-memory, TMA, and capacity-mode tests. The delay it injects matches the delay requested to within 0.152%. We also design a coupled thermal module that puts HBF, HBM, and the GPU in one advanced package, which is important for answering how severe the hot throttling problem becomes after HBF runs for a long time. Experiments with Qwen3-30B show how package heating, HBM-HBF allocation, and shared MoE demand jointly constrain the design space of future HBF accelerators.

cs.AR

Bio-inspired Learning and Decision-Making with Probabilistic In-Memory Computing Hardware: Part 2

This report extends our previous work (Part 1), which introduced an energy-based model for learning and decision-making under uncertainty. The model leverages stochastic Langevin dynamics to continuously evolve approximate probability distributions over neuron states and model weights. However, as noted in Part 1 and confirmed through GPU-based implementations, large-scale probabilistic energy-based models of this nature face significant scalability challenges due to excessive execution latency. This latency stems from a fundamental mismatch: massively parallel models with low arithmetic intensity (such as energy-based models) are being executed on processor architectures like GPUs that rely on high-bandwidth memory (HBM) interfaces. The HBM imposes brutally sequential execution constraints on inherently parallelizable models, creating the false impression that such models are unscalable. In reality, it is the GPU architecture itself, with its dependence on HBM interfaces, that is not a scalable processor architecture for this class of AI model. In this report, we demonstrate using a detailed transaction-level model (TLM) of a probabilistic analogue in-memory computing (AIMC) processor that the same energy-based model can execute well over 1000x faster than data-center-grade hardware by eliminating the HBM interface and performing computation directly within on-chip memory.

cs.AR