arXiv Science⌕ Search

arXiv subjects

Onur Mutlu

Publications and source records attributed to Onur Mutlu.

At least 19 recordsLinked to original sources

A Unified Device-Level Physical Framework for DRAM Read Disturbance

Read disturbance in dynamic random-access memory (DRAM) depends on both local device interactions and the electrical conditions imposed by shared array circuitry. Here, we combine DIMM-level characterization results, device measurements, and TCAD simulations to interpret RowHammer, RowPress, and ColumnDisturb within a unified device-level physical framework. We relate charge evolution at the floating storage node to three key mechanisms: trap-assisted electron migration (EM), capacitive coupling (CC), and sense-amplifier-mediated disturb (SAMD). EM is local and trap-sensitive, while CC weakens with wordline separation. SAMD extends disturbance through shared column circuitry by modifying unselected-cell leakage under rail-level bitline biases, a contribution supported by the approximately ninefold higher OFF-state leakage measured relative to retention-like conditions for a high-voltage storage state. These distinct spatial ranges account for localized RowHammer and RowPress failures and remote ColumnDisturb populations with abrupt changes at subarray boundaries. We further interpret prolonged RowPress activation as a transition from an initial RowHammer-like transient to sustained leakage driven mainly by SAMD under held wordline and bitline biases. Within this device-level framework, trap effectiveness and storage-state-dependent leakage provide an interpretation of previously puzzling failure signatures, including the earlier onset of 0-to-1 RowHammer failures despite the predominance of 1-to-0 failures at high hammer counts. The same framework explains the observed RowPress and ColumnDisturb polarities and the duration-dependent reversal of neighboring- and passing-wordline effectiveness. These results provide a physical basis for developing compact DRAM reliability models across access patterns and array configurations.

cond-mat.mes-hall↗

HARE: Fast Read Disturbance Threshold Profiling in Modern DRAM Chips via Reduced Timing Constraints

Modern DRAM chips are vulnerable to read disturbance, which manifests as bitflips in a victim row physically near an aggressor row that is repeatedly activated. State-of-the-art mitigations rely on accurate and exhaustive profiling of the read disturbance threshold (RDT), i.e., the minimum number of aggressor row activations needed to induce the first bitflip. However, RDT changes significantly and unpredictably over time, motivating online profilers that dynamically adjust a mitigation's RDT configuration. RDT profiling is costly for online profilers (e.g., hundreds of seconds for a 16-bank DDR4 module) because 1) measuring a single DRAM row's RDT requires many activations and 2) each DRAM row can have a different RDT, requiring many rows to be profiled. We introduce HARE, an online RDT profiling technique that intentionally exacerbates read disturbance to quickly profile a DRAM module. HARE's key idea is to reduce the timing constraints between consecutive DRAM commands during profiling. Doing so significantly reduces profiling time by 1) directly reducing the execution time of the profiling command sequence and 2) exacerbating read disturbance such that the first bitflip occurs at a smaller activation count than with the conventional RowHammer sequence. From our characterization of 180 real DDR4 DRAM chips from four major DRAM manufacturers, we make three observations. First, HARE measures a DRAM row's RDT 31.2% faster than the RowHammer profiler and a DRAM module's minimum RDT with an average reduction of 21.7%. Second, HARE flips more than 95% of the cells that the RowHammer pattern flips. Third, HARE preserves the RDT ranking of rows well enough such that it can exhaustively reprofile a small set of rows to improve its minimum RDT estimation. Our end-to-end evaluations show that HARE enables significant system performance improvements and outperforms the RowHammer profiler.

cs.AR↗

DaPPA: A Unified Data-Parallel Programming Framework for Efficient Processing-in-Memory Execution

Processing-in-memory (PIM) alleviates data-movement bottlenecks by placing computation near or inside memory. Two general-purpose PIM paradigms are now practical: processing-near-memory (PNM) and processing-using-memory (PUM). Although both target regular, data-intensive, data-parallel workloads, they remain difficult to program because data organization is tightly coupled to computation and differs across substrates. Thus, programmers must manually manage substrate-specific data partitioning, movement, layout, and tiling, preventing program portability across PIM systems. We propose DaPPA (data-parallel processing-in-memory architecture), a programming framework that exposes a single high-level data-parallel pattern interface and retargets it to multiple PIM substrates. The key idea of DaPPA is to decouple the expression of data parallelism from substrate-specific data organization: programmers express computation once using data-parallel patterns and a dataflow interface, while specialized backends automatically generate data orchestration for PNM and multi-level tiling for PUM. We evaluate DaPPA on representative substrates from both PIM paradigms. On the UPMEM PNM system, DaPPA outperforms hand-tuned implementations by 1.6x on average with 95% fewer lines-of-code, and outperforms the state-of-the-art SimplePIM framework by 1.4x on average with 62% fewer lines-of-code. On a SIMDRAM-like PUM substrate, DaPPA outperforms the state-of-the-art MIMDRAM compiler by 2.0x on average (up to 6.4x) across 12 workloads. DaPPA can deploy all ten of our PNM workloads, whereas CINM, the closest framework targeting both paradigms, can deploy only three, on which DaPPA is 2.7--6.8x faster. We open-source DaPPA at https://github.com/CMU-SAFARI/DaPPA.

cs.AR↗

GUMPIM: Unitary and Malleable Memory for Processing-in-Memory with Guaranteed PIM Pages

DRAM-based Processing-in-Memory (PIM) addresses the "memory wall" by executing computations directly inside main memory. However, memory interleaving and virtual memory limit contiguous data size visible to PIM units, constraining PIM task granularity. To mitigate this, existing PIM systems drastically isolate PIM memory or disable memory interleaving. These design choices, however, decrease the CPU memory bandwidth and introduce extra data transfer, leading to an additional "system memory wall" that must be resolved to realize PIM's full potential. In this work, we propose GUMPIM, a PIM system that allows interleaved CPU pages and non-interleaved PIM pages to coexist in a Unitary and Malleable memory space with Guaranteed PIM page allocation. GUMPIM enables zero-copy during PIM task offloading and maintains CPU memory bandwidth while ensuring low PIM offloading overhead. First, we propose a dual-track memory management mechanism consisting of independent page allocation and address translation for CPU and PIM pages. Second, we design GUMPIM interface hardware on PIM-enabled DRAMs to provide a dynamic address mapping for the different data layouts of CPU and PIM pages. Third, we propose a PIM-assisted page migration mechanism that transparently migrates pages while preserving CPU access bandwidth, thereby enabling guaranteed and accelerated PIM page allocation. GUMPIM requires no changes to commodity DRAM standards; all hardware modifications are limited to the DRAM side, ensuring full compatibility with existing CPUs and enabling immediate deployment on current HBMx- and LPDDRx-based PIM platforms. Our results show only <0.1% performance degradation for CPU workloads on GUMPIM. For PIM workloads, GUMPIM reduces memory allocation and CPU-part computation times by 2.7x and 4.93x, respectively, yielding an end-to-end 2.3x speedup over a state-of-the-art baseline system.

cs.AR↗

TeraAgent: A Distributed Agent-Based Simulation Engine for Simulating Half a Trillion Agents

Agent-based simulation is a method for studying highly complex systems in disciplines as diverse as biology, medicine, sociology, economics, finance, and more. In this method, an agent represents a small part of the system, such as a human cell, and, through interactions among many agents, the system's behavior emerges, like the growth of cancer in the human body. Real-world complex systems, such as a human organ, comprise billions of agents. However, the state-of-the-art agent-based simulation platform, BioDynaMo, does not support the distributed processing of a simulation across servers. This limitation restricts the scalability of agent counts to the computational resources available within a single server, hindering users from conducting larger and more meaningful simulations. In this paper, we introduce TeraAgent, a new distributed agent-based simulation engine. To overcome BioDynaMo's scalability limitation, TeraAgent enables efficient exchange of agent information across servers by implementing two solutions: 1) a tailored serialization mechanism that allows agents to be accessed and mutated directly at the receive buffer, and 2) delta encoding that significantly reduces data transfer across servers by leveraging the iterative nature of agent-based simulations. Built on our solutions, TeraAgent 1) enables extreme-scale simulations with half a trillion agents (292x that of BioDynaMo) on 84,096 CPU cores, 2) reduces time-to-result leveraging parallelism across compute nodes, 3) improves interoperability with third-party tools, and 4) provides users with more hardware flexibility. TeraAgent serializes agents with a median speedup of 110x (37x for deserialization) over the state-of-the-art ROOT I/O baseline, delivers 8x the agent update rate per CPU core of Biocellion, and improves in-situ visualization performance by 39x.

cs.DC↗

HULK: An Efficient Algorithm for Enabling Fast Bulk Bitwise Operations on Homomorphically Encrypted Data

A wide range of important cloud applications, e.g., database analytics, graph analytics, and genome analysis, spend a considerable amount of time performing bulk bitwise operations (e.g., AND, OR, XOR). These applications often operate on highly sensitive data, making data privacy a critical concern. Homomorphic encryption (HE) enables secure computation on encrypted data without requiring decryption, ensuring privacy in untrusted and shared environments. We analyze 13 end-to-end applications across three domains (healthcare, graph, and database analytics) and observe that bulk bitwise operations take 62-100% of the execution time of the healthcare and graph workloads. The key problem is that existing HE approaches perform them with high-latency homomorphic operations (e.g., multiplication or lookup tables) and significantly increase the data size. Our goal is to enable fast bulk bitwise operations on homomorphically encrypted data by designing an efficient HE algorithm that reduces the use of these costly operations. To this end, we propose HULK, which performs two key steps: (1) it constructs bulk bitwise operations using low-cost homomorphic additions, which compute the Hamming weight of the encrypted operand bits in every slot of a packed ciphertext without any homomorphic multiplication, and (2) it decodes the result of an AND, OR, or XOR from the Hamming weight with a single indicator polynomial, keeping the result in the standard encoding. Across 13 end-to-end applications in healthcare, graph, and database analytics, HULK improves performance over the arithmetic approach used by prior works by up to 7.26x (CPU) and 6.65x (GPU), and on average by 2.32x/1.78x/1.45x (CPU) and 2.08x/1.70x/1.51x (GPU) for healthcare/graph/database analytics. When we increase the reduction depth in a representative application, HULK's speedup grows to 10.10x over the state-of-the-art GPU baseline.

cs.CR↗

MORDOR: Mitigating Overheads of Read Disturbance Preventive Operations via Elastic Refresh Scheduling

Modern DRAM chips are susceptible to read disturbance phenomena such as RowHammer, where repeatedly accessing (hammering) a row of DRAM cells (i.e., a DRAM row) induces bitflips in other physically nearby (victim) DRAM rows. A common practice to avoid such bitflips is to preventively refresh victim rows that might otherwise experience bitflips. Unfortunately, preventive refreshes cause long latencies and need to be performed urgently before the aggressor row is activated again to ensure data integrity. This is done by prioritizing them over demand memory requests, thereby potentially imposing significant delays on those requests and causing performance and energy overheads. Our goal in this work is to alleviate these overheads by scheduling preventive refreshes off the critical path of demand memory requests. We propose MORDOR, a new preventive refresh scheduling policy that significantly reduces system performance degradation and energy consumption caused by preventive refresh operations. MORDOR is integrated into the memory controller and operates alongside memory-controller-based read disturbance mitigation techniques to intelligently delay preventive refresh operations, while maintaining their data integrity guarantees. MORDOR leverages the key observation that a preventive refresh operation targeting an aggressor row can be delayed to serve any other demand memory request, as long as that memory request does not access the aggressor row. By doing so, MORDOR executes latency-critical memory requests before long-latency preventive refresh operations, while mitigating read disturbance bitflips. We evaluate MORDOR by integrating it into six state-of-the-art read disturbance mitigation techniques. Our comprehensive evaluation shows that MORDOR significantly improves system performance and energy efficiency at low area cost.

cs.CR↗

Understanding the Power Consumption of Modern High Bandwidth Memory: Experimental Analysis and Modeling Using Real HBM2 DRAM Chips

We perform the first comprehensive experimental characterization of power consumed by real HBM2 DRAM chips. Our extensive characterization yields 1) the empirical basis for developing new, accurate HBM power models or validating existing power models and 2) key insights into structural and data-pattern-dependent variation of power in HBM2 chips. Out of our 13 new findings and 6 key takeaway messages, we highlight: 1) a read operation consumes significantly higher current than any other operation and 2) the toggled data bus signals in a data transfer burst significantly affect current draw where toggling all HBM2-internal bank group bus signals causes 29.4% higher power consumption than keeping them constant. Leveraging our empirical insights into HBM2 power consumption, we engineer an access pattern that yields 23.6% higher power consumption on average across 36 tested HBM2 chips than the highest-power-consuming JEDEC-specified current measurement loop. Our results have important implications for HBM-based system design and validation. Relying solely on JEDEC- or vendor-specified test loops to bound HBM power could cause system failures and/or thermal throttling in real-world high-power AI/ML workloads. To improve 3D-stacked DRAM power modeling in open source architectural simulation infrastructures, we develop a new HBM power model. Our model predicts the power of 36 real HBM2 chips across diverse workloads (including a real LLM decode workload) with 7.6 -- 8.1% mean absolute percentage error, substantially more accurately than state-of-the-art HBM power models. The power consumption predicted by our model for a power-intensive microbenchmark closely matches (with 2.4% to 5.3% error across HBM3E's specified supply voltage range) the average HBM3E memory power consumed by three tested NVIDIA H200 GPUs. We publicly release our power model at https://github.com/CMU-SAFARI/HBM-Power.

cs.AR↗

Terracotta: Enabling the Adoption of New DRAM Techniques via a Flexible DRAM Interface and Memory Controller

DRAM continues to limit the performance, energy efficiency, and robustness of modern systems. Many prior works propose DRAM techniques that support in-DRAM computation, improve memory access latency and parallelism, and enhance DRAM maintenance and reliability. However, adopting each new technique requires repeated modifications to the rigid DRAM interface and memory controller, hindering its deployment. Our goal is to reduce these repeated modifications. We observe that the DRAM commands and memory controller structures of many DRAM techniques are similar. Our key idea is to use these similarities to compose a set of primitives for implementing diverse DRAM techniques. We propose Terracotta, a new framework with two flexible components: (i) custom command extensions that let DRAM vendors define new commands within a single, standardized interface, and (ii) a programmable memory controller that system designers can program to support new DRAM techniques post-silicon. Together, these enable deployment by configuring the memory controller instead of modifying the interface and controller. We design Terracotta for a DDR5-based system and evaluate its performance, energy, and hardware complexity. For four DRAM techniques from four distinct domains (processing-using-DRAM, low-cost DRAM maintenance, subarray-level parallelism, and latency reduction), Terracotta retains almost all of the performance benefits (>96%) of custom implementations. A Terracotta-based composition of two techniques outperforms the Terracotta-based implementation of each technique alone, demonstrating the benefits of adding techniques without repeated interface and controller modifications. Terracotta incurs low DRAM energy (0.6-3.2%), area (0.03%), and power (0.56%) overheads in a high-end server-grade processor. Terracotta's source code is freely available at https://github.com/CMU-SAFARI/Terracotta.

cs.AR↗

Trail: Scalable and Low-Cost Temporal TLB Prefetching via Page-Table-Embedded Deltas

Address translation is a major bottleneck in data-intensive workloads. TLB prefetching can hide translation latency, but existing spatial prefetchers struggle with irregular accesses, while temporal prefetchers store address deltas in fixed-capacity hardware that cannot scale with application memory footprints. Our characterization of 200 translation-intensive workloads reveals that each virtual memory region has a small, recurring set of deltas, and over 94% of deltas fit in 18 signed bits. We introduce Trail, a temporal TLB prefetcher that stores deltas in unused bits of leaf page table entries (PTEs). When a region triggers a page table walk, Trail identifies the region that last triggered a walk from the same instruction and records their delta in that source region's PTE. When a later walk fetches the source region's PTE cache block, Trail retrieves its deltas without additional memory accesses and prefetches translations for likely destination regions into the TLBs and cache hierarchy. Storing multiple deltas per PTE cache block improves coverage, while using existing PTE bits allows metadata capacity to scale with the application's memory footprint without additional metadata storage. Across 200 workloads and 100 multiprogrammed mixes, Trail improves single-core (four-core) performance by 5.7% (11.5%) on average over a baseline without TLB prefetching, outperforming the best prior standalone TLB prefetcher by 1.7% (2.5%). Trail requires only a 64-entry hardware table to track per-instruction page table walk history. Trail is freely available at https://github.com/CMU-SAFARI/Virtuoso/tree/trail-artifact-release.

cs.AR↗

PipeDRAM: A Data-Transposition-Free Processing-Using-DRAM Architecture with Hardware/Software Pipelining

Processing-using-DRAM (PUD) architectures exploit the analog operational properties of DRAM to perform bulk bitwise Boolean and arithmetic operations inside memory arrays by organizing data in a vertical layout, where operand bits are stacked along DRAM columns. However, modern computing systems natively employ a horizontal data layout that preserves the cache line abstraction, leverages spatial locality in row buffers, and enables high memory throughput. This fundamental mismatch forces existing PUD architectures to frequently perform data layout transformations between horizontal and vertical formats, incurring significant performance, energy, and system integration overheads. Our goal is to eliminate data transposition overheads in PUD systems at low cost. To this end, we propose PipeDRAM, a PUD architecture that eliminates the need for runtime data layout transformation, enabling PUD operations directly over horizontally laid-out data. PipeDRAM's key ideas are to (i) deterministically reorganize bits inside each memory request to enable a PUD-friendly data placement within a DRAM array in a horizontal data layout, and (ii) employ a pipeline-based execution model that overlaps bit-dependent and bit-independent in-DRAM operations to exploit bit-level parallelism across the memory array. We compare PipeDRAM to different computing platforms. PipeDRAM provides (i) 11.8x, 11.8x, and 80.4x higher performance and (ii) 25.4x, 3.0x, and 38.0x lower energy consumption than three state-of-the-art PUD systems. PipeDRAM incurs low area cost on top of a DRAM chip (1.86%) and CPU die (0.05%). To enable further research on PUD systems, we open-source PipeDRAM at https://github.com/CMU-SAFARI/PipeDRAM.

cs.AR↗

Argus: Agentic, Reference-Calibrated, Tree-Guided, System-Software-Level Bottleneck Localization

Operating system (OS) code can account for a substantial share of CPU execution time. First, as application logic is offloaded to heterogeneous accelerators (e.g., GPUs), the CPU increasingly acts as an orchestrator, spending cycles in driver calls, data movement, and synchronization rather than in application code. Second, workloads such as serverless functions frequently invoke OS services. At the same time, the OS is a complex codebase spanning many subsystems (e.g., memory management, networking), making it hard to localize the specific code path responsible for a slowdown. Existing profilers expose measurements that require interpretation(e.g., perf and Intel VTune) or can perturb short operations when extensively instrumented (e.g., ftrace). Diagnosing OS bottlenecks can therefore require repeated kernel instrumentation and manual interpretation. We introduce Argus, an agentic LLM-based profiler that produces instrumentation code and autonomously reasons over potential OS-level bottlenecks. Argus integrates two key mechanisms: (i) a calibration methodology that involves collecting a measurement from an idle system and using it as a reference point to discover potential bottlenecks, and (ii) a tree-based data structure that represents the different OS execution paths, improving the agent's bottleneck localization accuracy. Argus aims to identify a specific kernel code path rather than stop at a subsystem-level diagnosis. In two case studies, we employ Argus to autonomously discover bottlenecks present in the memory management subsystem caused by (i) a THP aggressor co-running with other applications, and (ii) applications that incur different types of page faults. Argus produces 19 times fewer incorrect deep-path diagnoses than the strongest evaluated LLM-based baseline, which lacks reference calibration, while preserving low time-to-diagnosis (approximately 31 s)

cs.OS↗

CertiFlash: A Formal Verification Framework for Flash Translation Layers in Computational Solid State Drives

Data-intensive applications move large amounts of data from storage to the compute unit, incurring significant data movement overhead. Storage-centric computing reduces this overhead by moving computation near or inside solid-state drives (SSDs). Enabling it requires modifying SSD policies, e.g., address translation and garbage collection, which are part of the Flash Translation Layer (FTL), the SSD's firmware. Modifying the FTL is error-prone. Because FTL logic has direct access to security-critical device components, even a functionally correct FTL can leak data between tenants, drop integrity tags, or assign a flash block to the wrong tenant. We show that a faulty FTL can corrupt the device state at five surfaces inside the SSD, and demonstrate them on a DaisyPlus OpenSSD. Prior work verifies individual FTL designs, but has two limitations. (1) It establishes only functional correctness, so a modified FTL can violate isolation, integrity, and ownership and still pass verification. (2) It is tied to a single FTL design, so every modification requires redoing every proof. We propose CertiFlash, a formal verification framework for FTLs, mechanized in the Rocq proof assistant, that gives designers a machine-checked proof of security and correctness. CertiFlash models an FTL as a deterministic state machine with a single global invariant over mapping, isolation, integrity, ownership, and allocation. We prove once, over a general FTL model, that (i) every FTL operation preserves the invariant and (ii) the model refines an idealized block device. For a new design, a designer discharges five hypotheses about its own operations instead of redoing either proof. Across four case studies, a designer adds 27 to 3,231 lines against a 16,489-line framework, significantly reducing the verification effort. CertiFlash is open source.

cs.AR↗

DCC: Data-Centric Compilation of Machine Learning Kernels for Processing-In-Memory Architectures

High-performance Host processors can integrate Processing-In-Memory (PIM) devices, which can accelerate memory-intensive kernels of Machine Learning (ML) models, including Large Language Models (LLMs), by leveraging the large memory bandwidth available at PIM cores. However, Host processor needs consecutive elements distributed across DRAM banks, while PIM cores need consecutive elements within their local banks. This necessitates data rearrangements in ML kernel execution that pose significant performance and programmability challenges, further exacerbated by the need to support diverse PIM devices. Current compilation approaches lack systematic optimization for diverse ML kernels and multiple PIM devices, and may largely ignore data rearrangement costs during the compute code optimization step. We show that data rearrangements and compute code optimization are interdependent, and need to be jointly optimized during the tuning process. Therefore, we design DCC, the first data-centric ML compiler for PIM systems that jointly co-optimizes data rearrangements and compute code in a unified tuning process. DCC integrates a multi-layer PIM abstraction to support multiple PIM backends. DCC enables effective co-optimization of data partitioning strategies with compute loop partitioning schemes. DCC applies PIM-specific code optimizations, and leverages a fast and accurate performance prediction model to select the bestperforming code schedule for a given kernel on a target PIM architecture. Our evaluations in various individual ML kernels show that DCC achieves up to 7.68x speedup (2.21x average) on HBM-PIM, and up to 13.17x speedup (3.92x average) on AttAcc PIM, over GPU-only execution. In end-to-end LLM inference, DCC on AttAcc accelerates GPT-3 and LLaMA-2 by 4.52x average (up to 7.71x in LLaMA-2) over GPU. DCC is open-sourced at https://github.com/SPIN-Research-Group/DCC.

cs.AR↗

FLINT: Efficiently Leveraging High Bandwidth Flash for Capacity-Scalable LLM Inference Acceleration

LLM inference is increasingly constrained by accelerator memory capacity rather than compute throughput. This constraint is especially acute in single-accelerator and small-node inference systems, where limited on-package memory capacity restricts the size of deployable models. HBF is an emerging 3D-stacked NAND flash technology that provides multi-terabyte near-accelerator capacity, making it a promising capacity tier for storing LLM weights. However, existing HBF-based proposals face three adoption challenges: they (1) rely on coarse-grained static prefetching for LLM weights aiming to hide the microsecond-level read latency of the NAND flash device while maximizing HBF's read throughput, (2) expose NAND flash management tasks (e.g., refresh operations) to the accelerator-visible critical inference path, and (3) miss optimization opportunities to specialize and optimize the flash-management mechanisms to the workload behavior. Our goal is to design an efficient HBF substrate that integrates HBF as a memory-capacity tier alongside HBM while addressing these three challenges. To this end, we propose FLINT, a workload-driven HBF substrate for capacity-scalable LLM inference. FLINT introduces three mechanisms: (1) a hardware burst-buffer controller that dynamically coalesces and pipelines HBF reads aiming to utilize existing NAND flash buffers while sustaining high HBF bandwidth, (2) a phantom-plane refresh mechanism, which removes refresh from the critical inference path by moving refresh-related NAND flash operations outside the read foreground back via low-cost resource duplication, and (3) a read-only FTL, which replaces SSD-class support for arbitrary writes with a compact table that translates logical weight bursts to physical HBF locations.

cs.AR↗

RevaMp3D: Architecting the Processor Core and Cache Hierarchy for Systems with Monolithically-Integrated Logic and Memory

Recent nano-technological advances enable the Monolithic 3D (M3D) integration of multiple memory and logic layers in a single chip, allowing for fine-grained connections between layers and significantly alleviating main memory bottlenecks. We show for a variety of workloads, on a state-of-the-art M3D-based system, that the performance and energy bottlenecks shift from main memory to the processor core and cache hierarchy. Therefore, there is a need to revisit current designs that have been conventionally tailored to tackle the memory bottleneck. Based on the insights from our design space exploration, we propose RevaMp3D, introducing five key changes. First, we propose removing the shared last-level cache, as this delivers speedups comparable to or exceeding those from increasing its size or reducing its latency across all workloads. Second, since improving L1 cache latency has a large impact on performance, we reduce L1 latency by leveraging an M3D layout to shorten its wires. Third, we repurpose the area from the removed cache to widen and scale up pipeline structures, accommodating more in-flight requests that are efficiently served by M3D memory. To avoid latency penalties from these larger structures, we leverage M3D layouts. Fourth, to facilitate high thread-level parallelism, we propose a new fine-grained synchronization technique, using M3D's dense inter-layer connectivity. Fifth, we leverage the M3D main memory to mitigate the core bottlenecks. We propose a processor frontend design that memoizes the repetitive fetched, decoded, and reordered instructions, stores them in main memory, and turns off the relevant parts of the core when possible. RevaMp3D provides 1.2x-2.9x speedup and 1.2x-1.4x energy reduction compared to a state-of-the-art M3D system. We also analyze RevaMp3D's design decisions across various memory latencies to facilitate latency-aware design decisions.

cs.AR↗

Exploring High-Bandwidth Flash for Modern LLM Inference: Opportunities and Challenges

This work investigates the potential benefits and technical challenges of using high-bandwidth flash (HBF) for large language model (LLM) inference. HBF has gained increasing attention as a promising solution to mitigate memory-capacity bottlenecks in modern LLM-serving systems, but its benefits and challenges remain largely uninvestigated. To address this gap, we thoroughly analyze HBF-based LLM-serving systems under diverse system configurations and operating scenarios in which HBF serves as a main GPU-memory component to handle both reads and writes. Our analysis shows that, despite its limited write performance, HBF can significantly improve the batch size, throughput, and flexibility of LLM-serving systems while reducing the minimum GPU requirements, but realizing these benefits critically depends on sustaining HBM-comparable read bandwidth and requires significant endurance improvements.

cs.AR↗

Experimental Study on System-Level Performance Impact of Read Disturbance in Modern SSDs

This work investigates the system-level performance impact of read disturbance in modern NAND flash-based SSDs, aiming to provide new insights that can help develop better storage architectures and optimize system software. Continuous improvement in storage density over decades has led NAND flash memory to play a vital role in modern computing systems, but it also comes at a cost of significant reliability degradation. Among various error sources, read disturbance has gained growing attention as a major reliability concern due to its rapidly increasing impact, which can significantly affect system I/O performance by exacerbating SSD-internal reliability-management overheads. Although a large body of prior work has focused on device-level characterizations and optimizations, the system-level performance impact of read disturbance still remains largely uninvestigated. To address this gap, this work conducts a rigorous experimental study using 15 modern NVMe SSDs from 10 major vendors in two ways. First, we comprehensively analyze the system-level performance impact of read disturbance under diverse workloads and operating conditions. Second, to highlight the importance of efficient read-disturbance management, we showcase a new possible SSD-performance attack as a case study, demonstrating that an adversary can significantly degrade the I/O performance of other concurrently running processes by exploiting read disturbance alone in commodity SSDs. Based on our experimental study, we make 16 new observations and 7 takeaway lessons, which lead to 6 key directions for future improvements at the host-system and SSD-architecture levels to better cope with read disturbance.

cs.AR↗