arXiv subjects

Zhiyong Feng

Publications and source records attributed to Zhiyong Feng.

At least 163 records · Page 9Linked to original sources

arXiv2022

Improve Sensing and Communication Performance of UAV via Integrated Sensing and Communication

The unmanned aerial vehicle (UAV) needs to sense the environment to ensure safe flight, and the sensing accuracy and communication delay performance are two important indicators of safe flight. The strategy of using integrated sensing and communication (ISAC) technology to improve the sensing and communication performance is proposed in this paper. On the one hand, the extended kalman filter (EKF) algorithm is adopted to achieve the fusion of communication location information and sensing information to improve the accuracy of target sensing. On the other hand, a Identification Friend or Foe (IFF) method based on ISAC is proposed to reduce communication delay. Compared with the traditional IFF method, the integrated technology used for IFF can realize the radar sensing and communication interrogating functions in parallel, greatly shortening the sensing time. Simulation results show that using ISAC technology, the sensing performance of UAV has been greatly improved, the communication delay can be reduced by up to 50%, the accuracy of target sensing can be improved by 24.2% when communication location information and radar sensing information have the same sensing accuracy.

cs.NI↗

arXiv2022

Toward Multiple Integrated Sensing and Communication Base Station Systems: Collaborative Precoding Design with Power Constraint

The collaborative sensing of multiple Integrated sensing and communication (ISAC) base stations is one of the important technologies to achieve intelligent transportation. Interference elimination between ISAC base stations is the prerequisite for realizing collaborative sensing. In this paper, we focus on the mutual interference elimination problem in collaborative sensing of multiple ISAC base stations that can communicate and radar sense simultaneously by transmitting ISAC signals. We establish a mutual interference model of multiple ISAC base stations, which consists of communication and radar sensing related interference. Moreover, we propose a joint optimization algorithm (JOA) to solve the collaborative precoding problem with total power constraint (TPC) and perantenna power constraint (PPC). The optimal precoding design can be obtained by using JOA to set appropriate tradeoff coefficient between sensing and communication performance. The proposed collaborative precoding design algorithm is evaluated by considering sensing and communication performance via numerical results. The complexity of JOA for collaborative precoding under TPC and PPC is also compared and simulated in this paper.

cs.IT↗

arXiv2022

Vehicular Connectivity on Complex Trajectories: Roadway-Geometry Aware ISAC Beam-tracking

In this paper, we propose sensing-assisted beamforming designs for vehicles on arbitrarily shaped roads by relying on integrated sensing and communication (ISAC) signalling.Specifically, we aim to address the limitations of conventional ISAC beam-tracking schemes that do not apply to complex road geometries. To improve the tracking accuracy and communication quality of service (QoS) in vehicle to infrastructure (V2I) networks, it is essential to model the complicated roadway geometry. To that end, we impose the curvilinear coordinate system (CCS) in an interacting multiple model extended Kalman filter (IMM-EKF) framework. By doing so, both the position and the motion of the vehicle on a complicated road can be explicitly modeled and precisely tracked attributing to the benefits from the CCS. Furthermore, an optimization problem is formulated to maximize the array gain through dynamically adjusting the array size and thereby controlling the beamwidth, which takes the performance loss caused by beam misalignment into account.Numerical simulations demonstrate that the roadway geometry-aware ISAC beamforming approach outperforms the communication-only based and ISAC kinematic-only based technique in the tracking performance. Moreover, the effectiveness of the dynamic beamwidth design is also verified by our numerical results.

eess.SP↗

arXiv2022

Beam Training and Tracking in MmWave Communication: A Survey

Communicating on millimeter wave (mmWave) bands is ushering in a new epoch of mobile communication which provides the availability of 10 Gbps high data rate transmission. However, mmWave links are easily prone to short transmission range communication because of the serious free space path loss and the blockage by obstacles. To overcome these challenges, highly directional beams are exploited to achieve robust links by hybrid beamforming. Accurately aligning the transmitter and receiver beams, i.e. beam training, is vitally important to high data rate transmission. However, it may cause huge overhead which has negative effects on initial access, handover, and tracking. Besides, the mobility patterns of users are complicated and dynamic, which may cause tracking error and large tracking latency. An efficient beam tracking method has a positive effect on sustaining robust links. This article provides an overview of the beam training and tracking technologies on mmWave bands and reveals the insights for future research in the 6th Generation (6G) mobile network. Especially, some open research problems are proposed to realize fast, accurate, and robust beam training and tracking. We hope that this survey provides guidelines for the researchers in the area of mmWave communications.

eess.SP↗

arXiv2022

Mobility Support for Millimeter Wave Communications: Opportunities and Challenges

Millimeter-wave (mmWave) communication technology offers a potential and promising solution to support 5G and B5G wireless networks in dynamic scenarios and applications. However, mobility introduces many challenges as well as opportunities to mmWave applications. To address these problems, we conduct a survey of the opportunities and technologies to support mmWave communications in mobile scenarios. Firstly, we summarize the mobile scenarios where mmWave communications are exploited, including indoor wireless local area network (WLAN) or wireless personal area network (WPAN), cellular access, vehicle-to-everything (V2X), high speed train (HST), unmanned aerial vehicle (UAV), and the new space-air-ground-sea communication scenarios. Then, to address users' mobility impact on the system performance in different application scenarios, we introduce several representative mobility models in mmWave systems, including human mobility, vehicular mobility, high speed train mobility and ship mobility. Next we survey the key challenges and existing solutions to mmWave applications, such as channel modeling, channel estimation, anti-blockage, and capacity improvement. Lastly, we discuss the open issues concerning mobility-aware mmWave communications that deserve further investigation. In particular, we highlight future heterogeneous mobile networks, dynamic resource management, artificial intelligence (AI) for mobility and integration of geographical information, deployment of large intelligent surface and reconfigurable antenna technology, and finally, the evolution to Terahertz (THz) communications.

cs.IT↗

arXiv2022

Function-words Enhanced Attention Networks for Few-Shot Inverse Relation Classification

The relation classification is to identify semantic relations between two entities in a given text. While existing models perform well for classifying inverse relations with large datasets, their performance is significantly reduced for few-shot learning. In this paper, we propose a function words adaptively enhanced attention framework (FAEA) for few-shot inverse relation classification, in which a hybrid attention model is designed to attend class-related function words based on meta-learning. As the involvement of function words brings in significant intra-class redundancy, an adaptive message passing mechanism is introduced to capture and transfer inter-class differences.We mathematically analyze the negative impact of function words from dot-product measurement, which explains why message passing mechanism effectively reduces the impact. Our experimental results show that FAEA outperforms strong baselines, especially the inverse relation accuracy is improved by 14.33% under 1-shot setting in FewRel1.0.

cs.CL↗

arXiv2022

MmWave Radar and Vision Fusion for Object Detection in Autonomous Driving: A Review

With autonomous driving developing in a booming stage, accurate object detection in complex scenarios attract wide attention to ensure the safety of autonomous driving. Millimeter wave (mmWave) radar and vision fusion is a mainstream solution for accurate obstacle detection. This article presents a detailed survey on mmWave radar and vision fusion based obstacle detection methods. First, we introduce the tasks, evaluation criteria, and datasets of object detection for autonomous driving. The process of mmWave radar and vision fusion is then divided into three parts: sensor deployment, sensor calibration, and sensor fusion, which are reviewed comprehensively. Specifically, we classify the fusion methods into data level, decision level, and feature level fusion methods. In addition, we introduce three-dimensional(3D) object detection, the fusion of lidar and vision in autonomous driving and multimodal information fusion, which are promising for the future. Finally, we summarize this article.

cs.CV↗

arXiv2022

Anti-collision Technologies for Unmanned Aerial Vehicles: Recent Advances and Future Trends

Unmanned aerial vehicles (UAVs) are widely applied in civil applications, such as disaster relief, agriculture and cargo transportation, etc. With the massive number of UAV flight activities, the anti-collision technologies aiming to avoid the collisions between UAVs and other objects have attracted much attention. The anti-collision technologies are of vital importance to guarantee the survivability and safety of UAVs. In this article, a comprehensive survey on UAV anti-collision technologies is presented. We firstly introduce laws and regulations on UAV safety which prevent collision at the policy level. Then, the process of anti-collision technologies are reviewed from three aspects, i.e., obstacle sensing, collision prediction, and collision avoidance. We provide detailed survey and comparison of the methods of each aspect and analyze their pros and cons. Besides, the future trends on UAV anti-collision technologies are presented from the perspective of fast obstacle sensing and fast wireless networking. Finally, we summarize this article.

cs.RO↗

arXiv2021

Block Modeling-Guided Graph Convolutional Neural Networks

Graph Convolutional Network (GCN) has shown remarkable potential of exploring graph representation. However, the GCN aggregating mechanism fails to generalize to networks with heterophily where most nodes have neighbors from different classes, which commonly exists in real-world networks. In order to make the propagation and aggregation mechanism of GCN suitable for both homophily and heterophily (or even their mixture), we introduce block modeling into the framework of GCN so that it can realize "block-guided classified aggregation", and automatically learn the corresponding aggregation rules for neighbors of different classes. By incorporating block modeling into the aggregation process, GCN is able to aggregate information from homophilic and heterophilic neighbors discriminately according to their homophily degree. We compared our algorithm with state-of-art methods which deal with the heterophily problem. Empirical results demonstrate the superiority of our new approach over existing methods in heterophilic datasets while maintaining a competitive performance in homophilic datasets.

cs.LG↗

arXiv2021

Neighbor Discovery for VANET with Gossip Mechanism and Multi-packet Reception

Neighbor discovery (ND) is a key initial step of network configuration and prerequisite of vehicular ad hoc network (VANET). However, the convergence efficiency of ND is facing the requirements of multi-vehicle fast networking of VANET with frequent topology changes. This paper proposes gossip-based information dissemination and sensing information assisted ND with MPR (GSIM-ND) algorithm for VANET. GSIM-ND algorithm leverages efficient gossip-based information dissemination in the case of multi-packet reception (MPR). Besides, through multi-target detection function of multiple sensors installed in roadside unit (RSU), RSU can sense the distribution of vehicles and help vehicles to obtain the distribution of their neighbors. Thus, GSIM-ND algorithm leverages the dissemination of sensing information as well. The expected number of discovered neighbors within a given period is theoretically derived and used as the critical metric to evaluate the performance of GSIM-ND algorithm. The expected bounds of the number of time slots when a given number of neighbors needs to be discovered is derived as well. The simulation results verify the correctness of theoretical derivation. It is discovered that GSIM-ND algorithm proposed in this paper can always reach the short-term convergence quickly. Moreover, GSIM-ND algorithm is more efficient and stable compared with completely random algorithm (CRA), scan-based algorithm (SBA) and gossip-based algorithm. The convergence time of GSIM-ND algorithm is 40\%-90\% lower than that of these existing algorithms for both low density and high density networks. Thus, GSIM-ND can improve the efficiency of ND algorithm.

cs.NI↗

arXiv2021

Symbiotic Sensing and Communications Towards 6G: Vision, Applications, and Technology Trends

Driven by the vision of intelligent connection of everything and digital twin towards 6G, a myriad of new applications, such as immersive extended reality, autonomous driving, holographic communications, intelligent industrial internet, will emerge in the near future, holding the promise to revolutionize the way we live and work. These trends inspire a novel technical design principle that seamlessly integrates two originally decoupled functionalities, i.e., wireless communication and sensing, into one system in a symbiotic way, which is dubbed symbiotic sensing and communications (SSaC), to endow the wireless network with the capability to "see" and "talk" to the physical world simultaneously. Noting that the term SSaC is used instead of ISAC (integrated sensing and communications) because the word ``symbiotic/symbiosis" is more inclusive and can better accommodate different integration levels and evolution stages of sensing and communications. Aligned with this understanding, this article makes the first attempts to clarify the concept of SSaC, illustrate its vision, envision the three-stage evolution roadmap, namely neutralism, commensalism, and mutualism of SaC. Then, three categories of applications of SSaC are introduced, followed by detailed description of typical use cases in each category. Finally, we summarize the major performance metrics and key enabling technologies for SSaC.

cs.IT↗

arXiv2021

Joint Radar and Communication: A Survey

Joint radar and communication (JRC) technology has become important for civil and military applications for decades. This paper introduces the concepts, characteristics and advantages of JRC technology, presenting the typical applications that have benefited from JRC technology currently and in the future. This paper explores the state-of-the-art of JRC in the levels of coexistence, cooperation, co-design and collaboration. Compared to previous surveys, this paper reviews the entire trends that drive the development of radar sensing and wireless communication using JRC. Specifically, we explore an open research issue on radar and communication operating with mutual benefits based on collaboration, which represents the fourth stage of JRC evolution. This paper provides useful perspectives for future researches of JRC technology.

cs.IT↗

arXiv2021

DoA-LF: A Location Fingerprint Positioning Algorithm with Millimeter-Wave

Location fingerprint (LF) has been widely applied in indoor positioning. However, the existing studies on LF mostly focus on the fingerprint of WiFi below 6 GHz, bluetooth, ultra wideband (UWB), etc. The LF with millimeter-wave (mmWave) was rarely addressed. Since mmWave has the characteristics of narrow beam, fast signal attenuation and wide bandwidth, etc., the positioning error can be reduced. In this paper, an LF positioning method with mmWave is proposed, which is named as DoA-LF. Besides received signal strength indicator (RSSI) of access points (APs), the fingerprint database contains direction of arrival (DoA) information of APs, which is obtained via DoA estimation. Then the impact of the number of APs, the interval of reference points (RPs), the channel model of mmWave and the error of DoA estimation algorithm on positioning error is analyzed with Cramer-Rao lower bound (CRLB). Finally, the proposed DoA-LF algorithm with mmWave is verified through simulations. The simulation results have proved that mmWave can reduce the positioning error due to the fact that mmWave has larger path loss exponent and smaller variance of shadow fading compared with low frequency signals. Besides, accurate DoA estimation can reduce the positioning error.

cs.IT↗

arXiv2021

An Overview of Signal Processing Techniques for Joint Communication and Radar Sensing

Joint communication and radar sensing (JCR) represents an emerging research field aiming to integrate the above two functionalities into a single system, sharing a majority of hardware and signal processing modules and, in a typical case, sharing a single transmitted signal. It is recognised as a key approach in significantly improving spectrum efficiency, reducing device size, cost and power consumption, and improving performance thanks to potential close cooperation of the two functions. Advanced signal processing techniques are critical for making the integration efficient, from transmission signal design to receiver processing. This paper provides a comprehensive overview of JCR systems from the signal processing perspective, with a focus on state-of-the-art. A balanced coverage on both transmitter and receiver is provided for three types of JCR systems, communication-centric, radar-centric, and joint design and optimization.

eess.SP↗

arXiv2021

Modeling Global Semantics for Question Answering over Knowledge Bases

Semantic parsing, as an important approach to question answering over knowledge bases (KBQA), transforms a question into the complete query graph for further generating the correct logical query. Existing semantic parsing approaches mainly focus on relations matching with paying less attention to the underlying internal structure of questions (e.g., the dependencies and relations between all entities in a question) to select the query graph. In this paper, we present a relational graph convolutional network (RGCN)-based model gRGCN for semantic parsing in KBQA. gRGCN extracts the global semantics of questions and their corresponding query graphs, including structure semantics via RGCN and relational semantics (label representation of relations between entities) via a hierarchical relation attention mechanism. Experiments evaluated on benchmarks show that our model outperforms off-the-shelf models.

cs.AI↗

arXiv2020

Exemplar Loss for Siamese Network in Visual Tracking

Visual tracking plays an important role in perception system, which is a crucial part of intelligent transportation. Recently, Siamese network is a hot topic for visual tracking to estimate moving targets' trajectory, due to its superior accuracy and simple framework. In general, Siamese tracking algorithms, supervised by logistic loss and triplet loss, increase the value of inner product between exemplar template and positive sample while reduce the value of inner product with background sample. However, the distractors from different exemplars are not considered by mentioned loss functions, which limit the feature models' discrimination. In this paper, a new exemplar loss integrated with logistic loss is proposed to enhance the feature model's discrimination by reducing inner products among exemplars. Without the bells and whistles, the proposed algorithm outperforms the methods supervised by logistic loss or triplet loss. Numerical results suggest that the newly developed algorithm achieves comparable performance in public benchmarks.

cs.CV↗

arXiv2020

Value driven Analysis Framework of Service Ecosystem Evolution Mechanism

With the development of cloud computing, service computing, IoT(Internet of Things) and mobile Internet, the diversity and sociality of services are increasingly apparent. To meet the customized user demands, Service Ecosystem is emerging as a complex social-technology system, which is formed with various IT services through cross-border integration. However, how to analyze and promote the evolution mechanism of service ecosystem is still a serious challenge in the field, which is of great significance to achieve the expected system evolution trends. Based on this, this paper proposes a value-driven analysis framework of service ecosystem, including value creation, value operation, value realization and value distribution. In addition, a computational experiment system is established to verify the effectiveness of the analysis framework, which stimulates the effect of different operation strategies on the value network in the service ecosystem. The result shows that our analysis framework can provide new means and ideas for the analysis of service ecosystem evolution, and can also support the design of operation strategies. Index

cs.OH↗

arXiv2020

Value Entropy Model: Metric Method of Service Ecosystem Evolution

With the development of cloud computing, service computing, IoT(Internet of Things) and mobile Internet, the diversity and sociality of services are increasingly apparent. To meet the customized user demands, service ecosystems begins to emerge with the formation of various IT services collaboration network. However, service ecosystem is a complex social-technology system with the characteristics of natural ecosystems, economic systems and complex networks. Hence, how to realize the multi-dimensional evaluation of service ecosystem is of great significance to promote its sound development. Based on this, this paper proposes a value entropy model to analyze the performance of service ecosystem, which is conducive to integrate evaluation indicators of different dimensions. In addition, a computational experiment system is constructed to verify the effectiveness of value entropy model. The result shows that our model can provide new means and ideas for the analysis of service ecosystem.

cs.OH↗