arXiv Science⌕ Search

arXiv subjects

Zhenhua Liu

Publications and source records attributed to Zhenhua Liu.

63 records · Page 4Linked to original sources
arXiv2019

Sample Complexity of Power System State Estimation using Matrix Completion

In this paper, we propose an analytical framework to quantify the amount of data samples needed to obtain accurate state estimation in a power system - a problem known as sample complexity analysis in computer science. Motivated by the increasing adoption of distributed energy resources into the distribution-level grids, it becomes imperative to estimate the state of distribution grids in order to ensure stable operation. Traditional power system state estimation techniques mainly focus on the transmission network which involve solving an overdetermined system and eliminating bad data. However, distribution networks are typically underdetermined due to the large number of connection points and high cost of pervasive installation of measurement devices. In this paper, we consider the recently proposed state-estimation method for underdetermined systems that is based on matrix completion. In particular, a constrained matrix completion algorithm was proposed, wherein the standard matrix completion problem is augmented with additional equality constraints representing the physics (namely power-flow constraints). We analyze the sample complexity of this general method by proving an upper bound on the sample complexity that depends directly on the properties of these constraints that can lower number of needed samples as compared to the unconstrained problem. To demonstrate the improvement that the constraints add to distribution state estimation, we test the method on a 141-bus distribution network case study and compare it to the traditional least squares minimization state estimation method.

math.OC↗
arXiv2019

Geographically Coordinated Primary Frequency Control Technical Report

Primary Frequency Control (PFC) is a fast acting mechanism used to ensure high-quality power for the grid that is becoming an increasingly attractive option for load participation. Due to speed requirement and other considerations, it is often desirable to have distributed control laws. Current distributed PFC designs assume that the costs at each geographic location are independent. However, many networked systems, such as those for cloud computing, have interdependent costs across locations and therefore need geographic coordination. In this paper, distributed control laws are designed for interdependent, geo-distributed loads in PFC based on the optimality conditions of the global system. The controlled frequencies are provably stable, and the final equilibrium point is proven to strike an optimal balance between load participation and the frequency's deviation from its nominal set point. The case with a significant communication delay for control is also analyzed. We evaluate the proposed control laws with realistic numerical simulations. Under current technology, the proposed control laws achieve a convergence time that is smaller than droop control alone and is comparable to that of distributed control without interdependent costs. Results also highlight significant cost savings over existing approaches under a variety of settings.

math.OC↗
arXiv2019

Proof of Bishop's volume comparison theorem using singular soap bubbles

Bishop's volume comparison theorem states that a compact $n$-manifold with Ricci curvature larger than the standard $n$-sphere has less volume. While the traditional proof uses geodesic balls, we present another proof using isoperimetric hypersurfaces, also known as "soap bubbles," which minimize area for a given volume. Curiously, isoperimetric hypersurfaces can have codimension 7 singularities, an interesting challenge we are forced to overcome.

math.DG↗
arXiv2018

Stability Inequalities for Lawson Cones

We prove stability inequalities for Lawson cones $M_{kh}$ with $$(k,h),(h,k)\in\{(3,5),(2,7),(2,8),(2,9),(2,10),(2,11)\}.$$ This extends the results of G. De. Philippis and F. Maggi to all area-minimizing Lawson cones.

math.DG↗
arXiv2017

Incentivizing Reliable Demand Response with Customers' Uncertainties and Capacity Planning

One of the major issues with the integration of renewable energy sources into the power grid is the increased uncertainty and variability that they bring. If this uncertainty is not sufficiently addressed, it will limit the further penetration of renewables into the grid and even result in blackouts. Compared to energy storage, Demand Response (DR) has advantages to provide reserves to the load serving entities (LSEs) in a cost-effective and environmentally friendly way. DR programs work by changing customers' loads when the power grid experiences a contingency such as a mismatch between supply and demand. Uncertainties from both the customer-side and LSE-side make designing algorithms for DR a major challenge. This paper makes the following main contributions: (i) We propose DR control policies based on the optimal structures of the offline solution. (ii) A distributed algorithm is developed for implementing the control policies without efficiency loss. (iii) We further offer an enhanced policy design by allowing flexibilities into the commitment level. (iv) We perform real world trace based numerical simulations which demonstrate that the proposed algorithms can achieve near optimal social cost. Details can be found in our extended version.

math.OC↗
arXiv2017

Harnessing Flexible and Reliable Demand Response Under Customer Uncertainties

Demand response (DR) is a cost-effective and environmentally friendly approach for mitigating the uncertainties in renewable energy integration by taking advantage of the flexibility of customers' demands. However, existing DR programs suffer from either low participation due to strict commitment requirements or not being reliable in voluntary programs. In addition, the capacity planning for energy storage/reserves is traditionally done separately from the demand response program design, which incurs inefficiencies. Moreover, customers often face high uncertainties in their costs in providing demand response, which is not well studied in literature. This paper first models the problem of joint capacity planning and demand response program design by a stochastic optimization problem, which incorporates the uncertainties from renewable energy generation, customer power demands, as well as the customers' costs in providing DR. We propose online DR control policies based on the optimal structures of the offline solution. A distributed algorithm is then developed for implementing the control policies without efficiency loss. We further offer enhanced policy design by allowing flexibilities into the commitment level. We perform real world trace based numerical simulations. Results demonstrate that the proposed algorithms can achieve near optimal social costs, and significant social cost savings compared to baseline methods.

math.OC↗
arXiv2016

Optimizing Energy Storage Participation in Emerging Power Markets

The growing amount of intermittent renewables in power generation creates challenges for real-time matching of supply and demand in the power grid. Emerging ancillary power markets provide new incentives to consumers (e.g., electrical vehicles, data centers, and others) to perform demand response to help stabilize the electricity grid. A promising class of potential demand response providers includes energy storage systems (ESSs). This paper evaluates the benefits of using various types of novel ESS technologies for a variety of emerging smart grid demand response programs, such as regulation services reserves (RSRs), contingency reserves, and peak shaving. We model, formulate and solve optimization problems to maximize the net profit of ESSs in providing each demand response. Our solution selects the optimal power and energy capacities of the ESS, determines the optimal reserve value to provide as well as the ESS real-time operational policy for program participation. Our results highlight that applying ultra-capacitors and flywheels in RSR has the potential to be up to 30 times more profitable than using common battery technologies such as LI and LA batteries for peak shaving.

eess.SY↗
arXiv2015

Cyber physical modeling of distributed resources for distribution system operations

Co-simulation platforms are necessary to study the interactions of complex systems integrated in future smart grids. The Virtual Grid Integration Laboratory (VirGIL) is a modular co-simulation platform designed to study interactions between demand response strategies, building comfort, communication networks, and power system operation. This paper presents the coupling of power systems, buildings, communications and control under a master algorithm. There are two objectives. First, to use a modular architecture for VirGIL, based on the Functional Mock-up Interface (FMI), where several different modules can be added, exchanged, and tested. Second, to use a commercial power system simulation platform, familiar to power system operators, such as DIgSILENT Powerfactory. This will help reduce the barriers to the industry for adopting such platforms, investigate and subsequently deploy demand response strategies in their daily operation. VirGIL further introduces the integration of the Quantized State System (QSS) methods for simulation in this co-simulation platform. Results on how these systems interact using a real network and consumption data are also presented.

cs.CE↗