arXiv subjects

Zheng Li

Publications and source records attributed to Zheng Li.

At least 469 records · Page 26Linked to original sources

arXiv2015

The more Product Complexity, the more Actual Effort? An Empirical Investigation into Software Developments

[Background:] Software effort prediction methods and models typically assume positive correlation between software product complexity and development effort. However, conflicting observations, i.e. negative correlation between product complexity and actual effort, have been witnessed from our experience with the COCOMO81 dataset. [Aim:] Given our doubt about whether the observed phenomenon is a coincidence, this study tries to investigate if an increase in product complexity can result in the abovementioned counter-intuitive trend in software development projects. [Method:] A modified association rule mining approach is applied to the transformed COCOMO81 dataset. To reduce noise of analysis, this approach uses a constant antecedent (Complexity increases while Effort decreases) to mine potential consequents with pruning. [Results:] The experiment has respectively mined four, five, and seven association rules from the general, embedded, and organic projects data. The consequents of the mined rules suggested two main aspects, namely human capability and product scale, to be particularly concerned in this study. [Conclusions:] The negative correlation between complexity and effort is not a coincidence under particular conditions. In a software project, interactions between product complexity and other factors, such as Programmer Capability and Analyst Capability, can inevitably play a "friction" role in weakening the practical influences of product complexity on actual development effort.

cs.SE↗

arXiv2015

Interface enhanced electron-phonon coupling and high temperature superconductivity in potassium-coated ultra-thin FeSe films on SrTiO3

Alkali-metal (potassium) adsorption on FeSe thin films with thickness from two unit cells (UC) to 4-UC on SrTiO3 grown by molecular beam epitaxy is investigated with a low-temperature scanning tunneling microscope. At appropriate potassium coverage (0.2-0.3 monolayer), the tunneling spectra of the films all exhibit a superconducting-like gap larger than 11 meV (five times the gap value of bulk FeSe), and two distinct features of characteristic phonon modes at 11 meV and 21 meV. The results reveal the critical role of the interface enhanced electron-phonon coupling for possible high temperature superconductivity in the system and is consistent with recent theories. Our study provides compelling evidence for the conventional pairing mechanism for this type of heterostructure superconducting systems.

cond-mat.supr-con↗

arXiv2015

Thermal and nonthermal melting of silicon under femtosecond x-ray irradiation

As it is known from visible light experiments, silicon under femtosecond pulse irradiation can undergo the so-called 'nonthermal melting' if the density of electrons excited from the valence to the conduction band overcomes a certain critical value. Such ultrafast transition is induced by strong changes in the atomic potential energy surface, which trigger atomic relocation. However, heating of a material due to the electron-phonon coupling can also lead to a phase transition, called 'thermal melting'. This thermal melting can occur even if the excited-electron density is much too low to induce non-thermal effects. To study phase transitions, and in particular, the interplay of the thermal and nonthermal effects in silicon under a femtosecond x-ray irradiation, we propose their unified treatment by going beyond the Born-Oppenheimer approximation within our hybrid model based on tight binding molecular dynamics. With our extended model we identify damage thresholds for various phase transitions in irradiated silicon. We show that electron-phonon coupling triggers the phase transition of solid silicon into a low-density liquid phase if the energy deposited into the sample is above $\sim0.65$ eV per atom. For the deposited doses of over $\sim0.9$ eV per atom, solid silicon undergoes a phase transition into high-density liquid phase triggered by an interplay between electron-phonon heating and nonthermal effects. These thresholds are much lower than those predicted with the Born-Oppenheimer approximation ($\sim2.1$ eV/atom), and indicate a significant contribution of electron-phonon coupling to the relaxation of the laser-excited silicon. We expect that these results will stimulate dedicated experimental studies, unveiling in detail various paths of structural relaxation within laser-irradiated silicon.

cond-mat.mtrl-sci↗

arXiv2014

SINAP surface preparation processing for 500MHz superconducting cavity

This paper illustrates the design, fabrication and experiment results of surface preparation system for 500MHz superconducting cavity at Shanghai Institute of Applied Physic (SINAP). The SINAP established a set of clean room, buffered chemical polishing equipment, and high pressure ultra-pure water rinsing facility. The whole surface preparation procedure has been operated successfully and verified by the successful vertical tests of 500MHz single cell superconducting cavity.

physics.acc-ph↗

arXiv2014

Studies of LL-type 500MHz 5-cell superconducting cavity at SINAP

A low loss (LL) type 500 MHz 5-cell superconducting niobium prototype cavity with large beam aperture has been developed successfully including the optimization, the deep drawing and electron beam welding, the surface treatment and the vertical testing. The performance of the fundamental mode was optimized and the higher order modes were damped by adopting an enlarged beam pipe for propagation. Surface preparation or treatment including mechanical polishing, buffered chemical polishing and high pressure rinsing with ultra-pure water and so on was carried out carefully to promise a perfect inner surface condition. The vertical testing results show that the accelerating voltage higher than 7.5 MV was obtained while the quality factor was better than 1E9 at 4.2 K. No obvious multipacting or field emission was found during the test. However, a quench happened while increasing the field a little higher than 7.5 MV that at present limited the cavity performance.

physics.acc-ph↗

arXiv2014

Multiconfiguration time-dependent Hartree impurity solver for nonequilibrium dynamical mean-field theory

Nonequilibrium dynamical mean-field theory (DMFT) solves correlated lattice models by obtaining their local correlation functions from an effective model consisting of a single impurity in a self-consistently determined bath. The recently developed mapping of this impurity problem from the Keldysh time contour onto a time-dependent single-impurity Anderson model (SIAM) [C. Gramsch et al., Phys. Rev. B 88, 235106 (2013)] allows one to use wave function-based methods in the context of nonequilibrium DMFT. Within this mapping, long times in the DMFT simulation become accessible by an increasing number of bath orbitals, which requires efficient representations of the time-dependent SIAM wave function. These can be achieved by the multiconfiguration time-dependent Hartree (MCTDH) method and its multi-layer extensions. We find that MCTDH outperforms exact diagonalization for large baths in which the latter approach is still within reach and allows for the calculation of SIAMs beyond the system size accessible by exact diagonalization. Moreover, we illustrate the computation of the self-consistent two-time impurity Green's function within the MCTDH second quantization representation.

cond-mat.str-el↗

arXiv2014

Dynamics of fluctuations in a quantum system

"\textit{The noise is the signal}"[R. Landauer, Nature \textbf{392}, 658 (1998)] emphasizes the rich information content encoded in fluctuations. This paper assesses the dynamical role of fluctuations of a quantum system driven far from equilibrium, with laser-aligned molecules as a physical realization. Time evolutions of the expectation value and the uncertainty of a standard observable are computed quantum mechanically and classically. We demonstrate the intricate dynamics of the uncertainty that are strikingly independent of those of the expectation value, and their exceptional sensitivity to quantum properties of the system. In general, detecting the time evolution of the fluctuations of a given observable provides information on the dynamics of correlations in a quantum system.

quant-ph↗

arXiv2014

Noise Equivalent Counts Based Emission Image Reconstruction Algorithm of Tomographic Gamma Scanning

Tomographic Gamma Scanning (TGS) is a technique used to assay the nuclide distribution and radioactivity in nuclear waste drums. Both transmission and emission scans are performed in TGS and the transmission image is used for the attenuation correction in emission reconstructions. The error of the transmission image, which is not considered by the existing reconstruction algorithms, negatively affects the final results. An emission reconstruction method based on Noise Equivalent Counts (NEC) is presented. Noises from the attenuation image are concentrated to the projection data to apply the NEC Maximum-Likelihood Expectation-Maximization algorithm. Experiments are performed to verify the effectiveness of the proposed method.

nucl-ex↗

arXiv2014

The application of spectrum standardization method for carbon analysis in coal using laser-induced breakdown spectroscopy

Measurements of carbon content in coal using laser-induced breakdown spectroscopy (LIBS) is limited by its low measurement precision and accuracy. A spectrum standardization method was proposed to achieve both reproducible and accurate results for the quantitative analysis of carbon content in coal with LIBS. The proposed method utilized the molecular carbon emissions to compensate the diminution of atomic carbon emission caused by matrix effect. The compensated carbon line intensities were further converted into an assumed standard state with fixed plasma temperature, electron density, and total number density of elemental carbon, which is proportional to its concentration in the coal samples. In addition, in order to obtained better compensation for total carbon number density fluctuations, an iterative algorithm was applied, which is different from our previous standardization calculations. The modified spectrum standardization model was applied to the measurement of carbon content in 24 bituminous coal samples. The results demonstrated that the proposed method had superior performance over the generally applied normalization methods. The average relative standard deviation, the coefficient of determination, the root-mean-square error of prediction, and the average maximum relative error for the modified model were 3.44%, 0.83, 2.71%, and 12.61%, respectively, while the corresponding values for the normalization with segmental spectrum area were 6.00%, 0.75, 3.77%, and 15.40%, respectively, showing an overwhelming improvement.

physics.optics↗

arXiv2014

A model combining spectrum standardization and dominant factor based partial least square method for carbon analysis in coal by laser-induced breakdown spectroscopy

Successful quantitative measurement of carbon content in coal using laser-induced breakdown spectroscopy (LIBS) is suffered from relatively low precision and accuracy. In the present work, the spectrum standardization method was combined with the dominant factor based partial least square (PLS) method to improve the measurement accuracy of carbon content in coal by LIBS. The combination model employed the spectrum standardization method to convert the carbon line intensity into standard state for more accurately calculating the dominant carbon concentration, and then applied PLS with full spectrum information to correct the residual errors. The combination model was applied to the measurement of carbon content for 24 bituminous coal samples. The results demonstrated that the combination model could further improve the measurement accuracy compared with both our previously established spectrum standardization model and dominant factor based PLS model using spectral area normalized intensity for the dominant factor model. For example, the coefficient of determination (R2), the root-mean-square error of prediction (RMSEP), and the average relative error (ARE) for the combination model were 0.99, 1.75%, and 2.39%, respectively; while those values for the spectrum standardization method were 0.83, 2.71%, and 3.40%, respectively; and those values for the dominant factor based PLS model were 0.99, 2.66%, and 3.64%, respectively.

physics.optics↗

arXiv2014

HERMES: A Hierarchical Broadcast-Based Silicon Photonic Interconnect for Scalable Many-Core Systems

Optical interconnection networks, as enabled by recent advances in silicon photonic device and fabrication technology, have the potential to address on-chip and off-chip communication bottlenecks in many-core systems. Although several designs have shown superior power efficiency and performance compared to electrical alternatives, these networks will not scale to the thousands of cores required in the future. In this paper, we introduce Hermes, a hybrid network composed of an optimized broadcast for power-efficient low-latency global-scale coordination and circuit-switch sub-networks for high-throughput data delivery. This network will scale for use in thousand core chip systems. At the physical level, SoI-based adiabatic coupler has been designed to provide low-loss and compact optical power splitting. Based on the adiabatic coupler, a topology based on 2-ary folded butterfly is designed to provide linear power division in a thousand core layout with minimal cross-overs. To address the network agility and provide for efficient use of optical bandwidth, a flow control and routing mechanism is introduced to dynamically allocate bandwidth and provide fairness usage of network resources. At the system level, bloom filter-based filtering for localization of communication are designed for reducing global traffic. In addition, a novel greedy-based data and workload migration are leveraged to increase the locality of communication in a NUCA (non-uniform cache access) architecture. First order analytic evaluation results have indicated that Hermes is scalable to at least 1024 cores and offers significant performance improvement and power savings over prior silicon photonic designs.

cs.AR↗

arXiv2013

Early Observations on Performance of Google Compute Engine for Scientific Computing

Although Cloud computing emerged for business applications in industry, public Cloud services have been widely accepted and encouraged for scientific computing in academia. The recently available Google Compute Engine (GCE) is claimed to support high-performance and computationally intensive tasks, while little evaluation studies can be found to reveal GCE's scientific capabilities. Considering that fundamental performance benchmarking is the strategy of early-stage evaluation of new Cloud services, we followed the Cloud Evaluation Experiment Methodology (CEEM) to benchmark GCE and also compare it with Amazon EC2, to help understand the elementary capability of GCE for dealing with scientific problems. The experimental results and analyses show both potential advantages of, and possible threats to applying GCE to scientific computing. For example, compared to Amazon's EC2 service, GCE may better suit applications that require frequent disk operations, while it may not be ready yet for single VM-based parallel computing. Following the same evaluation methodology, different evaluators can replicate and/or supplement this fundamental evaluation of GCE. Based on the fundamental evaluation results, suitable GCE environments can be further established for case studies of solving real science problems.

cs.DC↗

arXiv2013

The Cloud's Cloudy Moment: A Systematic Survey of Public Cloud Service Outage

Inadequate service availability is the top concern when employing Cloud computing. It has been recognized that zero downtime is impossible for large-scale Internet services. By learning from the previous and others' mistakes, nevertheless, it is possible for Cloud vendors to minimize the risk of future downtime or at least keep the downtime short. To facilitate summarizing lessons for Cloud providers, we performed a systematic survey of public Cloud service outage events. This paper reports the result of this survey. In addition to a set of findings, our work generated a lessons framework by classifying the outage root causes. The framework can in turn be used to arrange outage lessons for reference by Cloud providers. By including potentially new root causes, this lessons framework will be smoothly expanded in our future work.

cs.DC↗

arXiv2013

Circumstantial-Evidence-Based Judgment for Software Effort Estimation

Expert judgment for software effort estimation is oriented toward direct evidences that refer to actual effort of similar projects or activities through experts' experiences. However, the availability of direct evidences implies the requirement of suitable experts together with past data. The circumstantial-evidence-based judgment proposed in this paper focuses on the development experiences deposited in human knowledge, and can then be used to qualitatively estimate implementation effort of different proposals of a new project by rational inference. To demonstrate the process of circumstantial-evidence-based judgment, this paper adopts propositional learning theory based diagnostic reasoning to infer and compare different effort estimates when implementing a Web service composition project with some different techniques and contexts. The exemplar shows our proposed work can help determine effort tradeoff before project implementation. Overall, circumstantial-evidence-based judgment is not an alternative but complementary to expert judgment so as to facilitate and improve software effort estimation.

cs.SE↗

arXiv2013

Towards Technology Independent Strategies for SOA Implementations

Benefiting from the technology based strategies, Service-Oriented Architecture (SOA) has been able to achieve the general goals such as agility, flexibility, reusability and efficiency. Nevertheless, technical conditions alone cannot guarantee successful SOA implementations. As a valuable and necessary supplement, the space of technology independent strategies should also be explored. Through treating SOA system as an instance of organization and identifying the common ground on the similar process of SOA implementation and organization design, this paper uses existing work in organization theory area to inspire the research into technology independent strategies of SOA implementation. As a result, four preliminary strategies that can be applied to organizational area we identify to support SOA implementations. Furthermore, the novel methodology of investigating technology independent strategies for implementing SOA is revealed, which encourages interdisciplinary research across service-oriented computing and organization theory.

cs.SE↗

arXiv2013

Building an Expert System for Evaluation of Commercial Cloud Services

Commercial Cloud services have been increasingly supplied to customers in industry. To facilitate customers' decision makings like cost-benefit analysis or Cloud provider selection, evaluation of those Cloud services are becoming more and more crucial. However, compared with evaluation of traditional computing systems, more challenges will inevitably appear when evaluating rapidly-changing and user-uncontrollable commercial Cloud services. This paper proposes an expert system for Cloud evaluation that addresses emerging evaluation challenges in the context of Cloud Computing. Based on the knowledge and data accumulated by exploring the existing evaluation work, this expert system has been conceptually validated to be able to give suggestions and guidelines for implementing new evaluation experiments. As such, users can conveniently obtain evaluation experiences by using this expert system, which is essentially able to make existing efforts in Cloud services evaluation reusable and sustainable.

cs.DC↗

arXiv2013

A Factor Framework for Experimental Design for Performance Evaluation of Commercial Cloud Services

Given the diversity of commercial Cloud services, performance evaluations of candidate services would be crucial and beneficial for both service customers (e.g. cost-benefit analysis) and providers (e.g. direction of service improvement). Before an evaluation implementation, the selection of suitable factors (also called parameters or variables) plays a prerequisite role in designing evaluation experiments. However, there seems a lack of systematic approaches to factor selection for Cloud services performance evaluation. In other words, evaluators randomly and intuitively concerned experimental factors in most of the existing evaluation studies. Based on our previous taxonomy and modeling work, this paper proposes a factor framework for experimental design for performance evaluation of commercial Cloud services. This framework capsules the state-of-the-practice of performance evaluation factors that people currently take into account in the Cloud Computing domain, and in turn can help facilitate designing new experiments for evaluating Cloud services.

cs.DC↗

arXiv2013

Effort-Oriented Classification Matrix of Web Service Composition

Within the service-oriented computing domain, Web service composition is an effective realization to satisfy the rapidly changing requirements of business. Therefore, the research into Web service composition has unfolded broadly. Since examining all of the related work in this area becomes a mission next to impossible, the classification of composition approaches can be used to facilitate multiple research tasks. However, the current attempts to classify Web service composition do not have clear objectives. Furthermore, the contexts and technologies of composition approaches are confused in the existing classifications. This paper proposes an effort-oriented classification matrix for Web service composition, which distinguishes between the context and technology dimension. The context dimension is aimed at analyzing the environment influence on the effort of Web service composition, while the technology dimension focuses on the technique influence on the effort. Consequently, besides the traditional classification benefits, this matrix can be used to build the basis of cost estimation for Web service composition in future research.

cs.SE↗