arXiv subjects

Zhen Wang

Publications and source records attributed to Zhen Wang.

At least 577 records · Page 32Linked to original sources

arXiv2019

Multi-bit quantum digital signature based on quantum temporal ghost imaging

Digital signature scheme is commonly employed in modern electronic commerce and quantum digital signature (QDS) offers the information-theoretical security by the laws of quantum mechanics against attackers with unreasonable computation resources. The focus of previous QDS was on the signature of 1-bit message. In contrast, based on quantum ghost imaging with security test, we propose a scheme of QDS in which a multi-bit message can be signed at a time. Our protocol is no more demanding than the traditional cases for the requirements of quantum resources and classical communications. The multi-bit protocol could simplify the procedure of QDS for long messages in practical applications.

quant-ph↗

arXiv2019

Experimental demonstration of high-rate measurement-device-independent quantum key distribution over asymmetric channels

Measurement-device-independent quantum key distribution (MDI-QKD) can eliminate all detector side channels and it is practical with current technology. Previous implementations of MDI-QKD all use two symmetric channels with similar losses. However, the secret key rate is severely limited when different channels have different losses. Here we report the results of the first high-rate MDI-QKD experiment over $asymmetric$ channels. By using the recent 7-intensity optimization approach, we demonstrate $>$10x higher key rate than previous best-known protocols for MDI-QKD in the situation of large channel asymmetry, and extend the secure transmission distance by more than 20-50 km in standard telecom fiber. The results have moved MDI-QKD towards widespread applications in practical network settings, where the channel losses are asymmetric and user nodes could be dynamically added or deleted.

quant-ph↗

arXiv2019

Role of disorder and correlations in metal-insulator transition in ultrathin SrVO3 films

Metallic oxide SrVO3 represents a prototype system for the study of the mechanism behind thickness-induced metal-to-insulator transition (MIT) or crossover in thin films due to its simple cubic symmetry with one electron in the 3d state in the bulk. Here we report a deviation of chemical composition and distortion of lattice structure existing in the initial 3 unit cells of SrVO3 films grown on SrTiO3 (001) from its bulk form, which shows a direct correlation to the thickness-dependent MIT. In-situ photoemission and scanning tunneling spectroscopy indicate a MIT at the critical thickness of ~3 unit cell (u.c.), which coincides with the formation of a (root2Xroot2)R45 surface reconstruction. However, atomically resolved scanning transmission electron microscopy and electron energy loss spectroscopy show depletion of Sr, change of V valence, thus implying the existence of a significant amount of oxygen vacancies in the 3 u.c. of SrVO3 near the interface. Transport and magneto-transport measurements further reveal that disorder, rather than electron correlations, is likely to be the main cause for the MIT in the SrVO3 ultrathin films.

cond-mat.str-el↗

arXiv2019

Surface and Interface Properties of La2/3Sr1/3MnO3 Thin Films on SrTiO3 (001)

Understanding and manipulating properties emerging at a surface or an interface require a thorough knowledge of structure-property relationships. We report a study of a prototype oxide system, La2/3Sr1/3MnO3 grown on SrTiO3(001), by combining in-situ angle-resolved x-ray photoelectron spectroscopy, ex-situ x-ray diffraction, and scanning transmission electron microscopy/spectroscopy with electric transport measurements. We find that La2/3Sr1/3MnO3 films thicker than 20 unit cells (u.c.) exhibit a universal behavior with no more than one u.c. intermixing at the interface but at least 3 u.c. of Sr segregation near the surface which is (La/Sr)O terminated. The conductivity vs film thickness shows the existence of nonmetallic layers with thickness ~ 6.5 +/- 0.9 u.c., which is independent of film thickness but mainly relates to the deviation of Sr concentration near the surface region. Below 20 u.c., the surface of the films appears mixed (La/Sr)O with MnO2 termination. Decreasing film thickness to less than 10 u.c. leads to the enhanced deviation of chemical composition in the films and eventually drives the film insulating. Our observation offers a natural explanation for the thickness-driven metal-nonmetal transition in thin films based on the variation of film stoichiometry.

cond-mat.str-el↗

arXiv2019

Experimental Quantum Switching for Exponentially Superior Quantum Communication Complexity

Finding exponential separation between quantum and classical information tasks is like striking gold in quantum information research. Such an advantage is believed to hold for quantum computing but is proven for quantum communication complexity. Recently, a novel quantum resource called the quantum switch---which creates a coherent superposition of the causal order of events, known as quantum causality---has been harnessed theoretically in a new protocol providing provable exponential separation. We experimentally demonstrate such an advantage by realizing a superposition of communication directions for a two-party distributed computation. Our photonic demonstration employs $d$-dimensional quantum systems, qudits, up to $d=2^{13}$ dimensions and demonstrates a communication complexity advantage, requiring less than $(0.696 \pm 0.006)$ times the communication of any causally ordered protocol. These results elucidate the crucial role of the coherence of communication direction in achieving the exponential separation for the one-way processing task, and open a new path for experimentally exploring the fundamentals and applications of advanced features of indefinite causal structures.

quant-ph↗

arXiv2019

Artificial Intelligence for Prosthetics - challenge solutions

In the NeurIPS 2018 Artificial Intelligence for Prosthetics challenge, participants were tasked with building a controller for a musculoskeletal model with a goal of matching a given time-varying velocity vector. Top participants were invited to describe their algorithms. In this work, we describe the challenge and present thirteen solutions that used deep reinforcement learning approaches. Many solutions use similar relaxations and heuristics, such as reward shaping, frame skipping, discretization of the action space, symmetry, and policy blending. However, each team implemented different modifications of the known algorithms by, for example, dividing the task into subtasks, learning low-level control, or by incorporating expert knowledge and using imitation learning.

cs.LG↗

arXiv2019

Characterization of migrated seismic volumes using texture attributes: a comparative study

In this paper, we examine several typical texture attributes developed in the image processing community in recent years with respect to their capability of characterizing a migrated seismic volume. These attributes are generated in either frequency or space domain, including steerable pyramid, curvelet, local binary pattern, and local radius index. The comparative study is performed within an image retrieval framework. We evaluate these attributes in terms of retrieval accuracy. It is our hope that this comparative study will help acquaint the seismic interpretation community with the many available powerful image texture analysis techniques, providing more alternative attributes for their seismic exploration.

cs.CV↗

arXiv2019

A general model for plane-based clustering with loss function

In this paper, we propose a general model for plane-based clustering. The general model contains many existing plane-based clustering methods, e.g., k-plane clustering (kPC), proximal plane clustering (PPC), twin support vector clustering (TWSVC) and its extensions. Under this general model, one may obtain an appropriate clustering method for specific purpose. The general model is a procedure corresponding to an optimization problem, where the optimization problem minimizes the total loss of the samples. Thereinto, the loss of a sample derives from both within-cluster and between-cluster. In theory, the termination conditions are discussed, and we prove that the general model terminates in a finite number of steps at a local or weak local optimal point. Furthermore, based on this general model, we propose a plane-based clustering method by introducing a new loss function to capture the data distribution precisely. Experimental results on artificial and public available datasets verify the effectiveness of the proposed method.

cs.LG↗

arXiv2019

Energy-Time Entanglement-based Dispersive Optics Quantum Key Distribution over Optical Fibers of 20 km

An energy-time entanglement-based dispersive optics quantum key distribution (DO-QKD) is demonstrated experimentally over optical fibers of 20 km. In the experiment, the telecom band energy-time entangled photon pairs are generated through spontaneous four wave mixing in a silicon waveguide. The arrival time of photons are registered for key generating and security test. High dimensional encoding in the arrival time of photons is used to increase the information per coincidence of photon pairs. The bin sifting process is optimized by a three level structure, which significantly reduces the raw quantum bit error rate (QBER) due to timing jitters of detectors and electronics. A raw key generation rate of 151kbps with QBER of 4.95% is achieved, under a time-bin encoding format with 4 bits per coincidence. This experiment shows that entanglement-based DO-QKD can be implemented in an efficient and convenient way, which has great potential in quantum secure communication networks in the future.

quant-ph↗

arXiv2019

Tensor-based subspace learning for tracking salt-dome boundaries

The exploration of petroleum reservoirs has a close relationship with the identification of salt domes. To efficiently interpret salt-dome structures, in this paper, we propose a method that tracks salt-dome boundaries through seismic volumes using a tensor-based subspace learning algorithm. We build texture tensors by classifying image patches acquired along the boundary regions of seismic sections and contrast maps. With features extracted from the subspaces of texture tensors, we can identify tracked points in neighboring sections and label salt-dome boundaries by optimally connecting these points. Experimental results show that the proposed method outperforms the state-of-the-art salt-dome detection method by employing texture information and tensor-based analysis.

eess.IV↗

arXiv2018

Noise-robust detection and tracking of salt domes in postmigrated volumes using texture, tensors, and subspace learning

The identification of salt dome boundaries in migrated seismic data volumes is important for locating petroleum reservoirs. The presence of noise in the data makes computer-aided salt dome interpretation even more challenging. In this paper, we develop noise-robust algorithms that can label boundaries of salt domes both effectively and efficiently. Our research is twofold. First, we utilize a texture-based gradient to accomplish salt dome detection. We show that by employing a dissimilarity measure based on two-dimensional (2D) discrete Fourier transform (DFT), the algorithm is capable of efficiently detecting salt dome boundaries with accuracy. At the same time, our analysis shows that the proposed algorithm is robust to noise. Once the detection is performed for an initial 2D seismic section, we propose to track the initial boundaries through the data volume to accomplish an efficient labeling process by avoiding parameters tuning that would have been necessary if detection had been performed for every seismic section. The tracking process involves a tensor-based subspace learning process, in which we build texture tensors using patches from different seismic sections. To accommodate noise components with various levels in a texture tensor, we employ noise-adjusted principal component analysis (NA-PCA), so that principal components corresponding to greater signal-to-noise ratio values may be selected for tracking. We validate our detection and tracking algorithms through experiments using seismic datasets acquired from Netherland offshore F3 block in the North Sea with very encouraging results.

eess.IV↗

arXiv2018

A comparative study of texture attributes for characterizing subsurface structures in seismic volumes

In this paper, we explore how to computationally characterize subsurface geological structures presented in seismic volumes using texture attributes. For this purpose, we conduct a comparative study of typical texture attributes presented in the image processing literature. We focus on spatial attributes in this study and examine them in a new application for seismic interpretation, i.e., seismic volume labeling. For this application, a data volume is automatically segmented into various structures, each assigned with its corresponding label. If the labels are assigned with reasonable accuracy, such volume labeling will help initiate an interpretation process in a more effective manner. Our investigation proves the feasibility of accomplishing this task using texture attributes. Through the study, we also identify advantages and disadvantages associated with each attribute.

cs.CV↗

arXiv2018

Excitonic Complexes and Optical Gain in Two-Dimensional Molybdenum Ditelluride Well below Mott Transition

Strong Coulomb interaction in 2D materials provides unprecedented opportunities for studying many key issues of condensed matter physics, such as co-existence and mutual conversions of excitonic complexes, fundamental optical processes associated with their conversions, and their roles in the celebrated Mott transition. Recent lasing demonstrations in 2D materials raise important questions about the existence and origin of optical gain and possible roles of excitonic complexes. While lasing occurred at extremely low densities dominated by various excitonic complexes, optical gain was observed in the only experiment at densities several orders of magnitude higher, exceeding the Mott density. Here, we report a new gain mechanism involving charged excitons or trions well below the Mott density in 2D molybdenum ditelluride. Our combined experimental and modeling study not only reveals the complex interplays of excitonic complexes well below the Mott transition, but also provides foundation for lasing at extremely low excitation levels, important for future energy efficient photonic devices.

cond-mat.mes-hall↗

arXiv2018

Experimental demonstration of nonbilocality with truly independent sources and strict locality constraints

Entanglement swapping entangles two particles that have never interacted[1], which implicitly assumes that each particle carries an independent local hidden variable, i.e., the presence of bilocality[2]. Previous experimental studies of bilocal hidden variable models did not fulfill the central requirement that the assumed two local hidden variable models must be mutually independent and hence their conclusions are flawed on the rejection of local realism[3-5]. By harnessing the laser phase randomization[6] rising from the spontaneous emission to the stimulated emission to ensure the independence between entangled photon-pairs created at separate sources and separating relevant events spacelike to satisfy the no-signaling condition, for the first time, we simultaneously close the loopholes of independent source, locality and measurement independence in an entanglement swapping experiment in a network. We measure a bilocal parameter of 1.181$\pm$0.004 and the CHSH game value of 2.652$\pm$0.059, indicating the rejection of bilocal hidden variable models by 45 standard deviations and local hidden variable models by 11 standard deviations. We hence rule out local realism and justify the presence of quantum nonlocality in our network experiment. Our experimental realization constitutes a fundamental block for a large quantum network. Furthermore, we anticipate that it may stimulate novel information processing applications[7,8].

quant-ph↗

arXiv2018

Ramp-based Twin Support Vector Clustering

Traditional plane-based clustering methods measure the cost of within-cluster and between-cluster by quadratic, linear or some other unbounded functions, which may amplify the impact of cost. This letter introduces a ramp cost function into the plane-based clustering to propose a new clustering method, called ramp-based twin support vector clustering (RampTWSVC). RampTWSVC is more robust because of its boundness, and thus it is more easier to find the intrinsic clusters than other plane-based clustering methods. The non-convex programming problem in RampTWSVC is solved efficiently through an alternating iteration algorithm, and its local solution can be obtained in a finite number of iterations theoretically. In addition, the nonlinear manifold-based formation of RampTWSVC is also proposed by kernel trick. Experimental results on several benchmark datasets show the better performance of our RampTWSVC compared with other plane-based clustering methods.

cs.LG↗

arXiv2018

Fault Detection Using Color Blending and Color Transformations

In the field of seismic interpretation, univariate databased maps are commonly used by interpreters, especially for fault detection. In these maps, contrast between target regions and the background is one of the main factors that affect the accuracy of the interpretation. Since univariate data-based maps are not capable of providing a high contrast representation, to overcome this issue, we turn these univariate data-based maps into multivariate data-based representations using color blending. We blend neighboring time sections, frames that are viewed in the time direction of migrated seismic volumes, as if they corresponded to the red, green, and blue channels of a color image. Furthermore, we apply color transformations to extract more reliable structural information. Experimental results show that the proposed method improves the accuracy of fault detection by limiting the average distance between detected fault lines and the ground truth into one pixel.

eess.IV↗

arXiv2018

Pressure-induced superconductivity in topological semimetal NbAs2

Topological superconductivity with Majorana bound states, which are critical to implement nonabelian quantum computation, may be realized in three-dimensional semimetals with nontrivial topological feature, when superconducting transition occurs in the bulk. Here, we report pressure-induced superconductivity in a transition-metal dipnictide NbAs2. The emergence of superconductivity is not accompanied by any structural phase transition up to the maximum experimental pressure of 29.8 GPa, as supported by pressure-dependent synchrotron X-ray diffraction and Raman spectroscopy. Intriguingly, the Raman study reveals rapid phonon mode hardening and broadening above 10 GPa, in coincident with the superconducting transition. Using first principle calculations, we determine Fermi surface change induced by pressure, which steadily increases the density of states without breaking the electron-hole compensation. Noticeably, the main hole pocket of NbAs2 encloses one time-reversal-invariant momenta of the monoclinic lattice, suggesting NbAs2 as a candidate of topological superconductors.

cond-mat.supr-con↗

arXiv2018

Robust Bhattacharyya bound linear discriminant analysis through adaptive algorithm

In this paper, we propose a novel linear discriminant analysis criterion via the Bhattacharyya error bound estimation based on a novel L1-norm (L1BLDA) and L2-norm (L2BLDA). Both L1BLDA and L2BLDA maximize the between-class scatters which are measured by the weighted pairwise distances of class means and meanwhile minimize the within-class scatters under the L1-norm and L2-norm, respectively. The proposed models can avoid the small sample size (SSS) problem and have no rank limit that may encounter in LDA. It is worth mentioning that, the employment of L1-norm gives a robust performance of L1BLDA, and L1BLDA is solved through an effective non-greedy alternating direction method of multipliers (ADMM), where all the projection vectors can be obtained once for all. In addition, the weighting constants of L1BLDA and L2BLDA between the between-class and within-class terms are determined by the involved data set, which makes our L1BLDA and L2BLDA adaptive. The experimental results on both benchmark data sets as well as the handwritten digit databases demonstrate the effectiveness of the proposed methods.

cs.LG↗