arXiv Science⌕ Search

arXiv subjects

Zhe Jiang

Publications and source records attributed to Zhe Jiang.

At least 19 recordsLinked to original sources
arXiv2026

ACE: Adaptive Calibration-Free Expert Skipping for MoE-based LLMs

Mixture-of-Experts (MoE) architectures provide an efficient paradigm for scaling large language models (LLMs), yet fixed top-k routing activates the same number of expert slots for every token, causing substantial redundant computation. Existing expert-skipping methods often rely on router confidence, calibration data, or additional training, and therefore cannot reliably estimate the actual contribution of routed experts. To this end, we propose ACE, a training-free, calibration-free, and checkpoint-preserving framework for token-adaptive expert skipping in MoE-based LLMs. ACE contains two complementary components: 1) Global Spectral Proxy (GSP), which estimates global transformation capacity from the coupled gate, up, and down projections together with RMSNorm scaling; and 2) Router-Conditioned Refinement (RCR), which constructs expert-specific direction prototypes from centered router weights and evaluates expert responses along routing-preferred directions. During inference, ACE combines both estimates with runtime router gates and skips an expert slot only when both views identify it as low-contribution, while always retaining the top-1 expert. All expert statistics are computed offline, leaving only table lookups and lightweight scalar operations online. Extensive experiments across three MoE-based LLMs and eight benchmarks demonstrate that ACE consistently outperforms existing static and dynamic baselines, with increasingly pronounced advantages under aggressive expert skipping. For instance, at a 50% skipping ratio on Qwen3.6-35B-A3B, ACE reduces WikiText-2 perplexity by 7.96% and improves average downstream accuracy by 4.15 percentage points over the strongest competing method.

cs.AI↗
arXiv2026

SeqFeed: Improving Agentic RTL Code Generation with Sequential Behavior Feedback

RTL code generation is a critical stage in hardware design, and the emergence of agentic systems offers new opportunities to automate this process. To generate correct RTL code, agents must understand sequential behavior, including how signals evolve and propagate over multiple clock cycles. However, effectively conveying such temporal information to agents remains a significant challenge. RTL code does not expose cycle-level signal behavior for a specific execution, whereas full simulation waveforms are too voluminous and noisy for effective LLM analysis. To address these limitations, we study how human engineers reason about sequential behavior and identify three requirements for effective feedback: it should be event-addressable, dependency-traceable, and iteratively-queryable. Guided by these requirements, we propose \textit{SeqFeed}, which comprises two complementary mechanisms: (1) \textit{SeQuery}, an SQL-like waveform query language that enables agents to anchor queries to semantic events and sample signal values at relative time points; and (2) \textit{SeGraph}, a dependency graph that tracks signal propagation across clock cycles. Experimental results across multiple LLMs demonstrate the effectiveness of SeqFeed in improving pass rates. SeQuery and SeGraph are each effective independently and provide complementary benefits when used together.

cs.AR↗
arXiv2026

GISAgentBench: A Practitioner-Sourced Benchmark for Evaluating LLM Agents on GIS Tasks

Geographic Information System (GIS) professionals rely on multi-step spatial analysis workflows to support decision-making in urban planning, disaster response, and environmental monitoring. The process is tedious, time-consuming, and error-prone. While recent large language model (LLM) agents equipped with external tools have the potential to automate geospatial analysis, their ability to perform realistic GIS workflows remains largely unexplored. Existing GIS agent benchmarking datasets are mostly drawn from textbooks, tutorials, or LLM-generated seeds and remain limited in size and trajectory depth. More importantly, none provides ground truth outputs. They therefore rely on surrogate signals such as code similarity, trajectory matching, or LLM and VLM judges, which can conflate workflow resemblance with task correctness. To address this gap, we introduce GISAgentBench, a benchmark of 349 multi-step GIS tasks curated from GIS Stack Exchange and instantiated on real public data across six selected geographic areas of interest. Each task ships with an executable reference trajectory and an exact ground truth output file, enabling strict, deterministic, tolerance-aware output matching beyond LLM judging. Evaluations of six LLM models reveal that realistic GIS workflows remain challenging: the best agent completes only 32.7% of tasks under strict tolerance-aware scoring, although most models produce outputs that are close to the ground truth.

cs.AI↗
arXiv2026

Model-Driven Discipline for Multi-Agent LLMs: Requirement-to-Verification Generation of Traceable System Models

Software complexity is a long-standing challenge for system engineers. Model-Driven Engineering (MDE) addresses it by treating models as first-class artefacts, but a typical MDE process spans many tools and produces heterogeneous models of different system aspects, making traceability, maintenance, and change management difficult. We propose RADIANT, an engineering methodology that combines MDE with Multi-Agent Large Language Models (LLMs) for complete model-based system development, with a focus on safety-critical systems. From a carefully specified requirement model, RADIANT automatically generates heterogeneous models across engineering phases -- a concept model, a domain-specific modelling language, a conforming system model, and a behaviour model -- together with executable, element-level traceability links, on top of which it provides exact, automated change-impact analysis. Generated behaviour models are translated into CSP and formally verified (e.g.\ for deadlock freedom and convergence) with a counterexample-driven repair loop. Evaluating RADIANT across three LLMs, we find that the multi-agent decomposition reliably improves the \emph{syntactic validity} of the generated formal artefacts over a single-agent baseline -- and their \emph{executability} where the model's code generation permits -- while gains in semantic accuracy are model-dependent. A six-participant study shows an order-of-magnitude ($10$--$15\times$) reduction in development time, and the unmodified pipeline transfers to a second domain.

cs.SE↗
arXiv2026

Yuvion LLM: An Adversarially-Aware Large Language Model for Content And AI Safety

As large language models are increasingly deployed in real-world systems, safety failures can still lead to harmful outputs and dangerous misuse. We argue that the essence of safety is adversarial: many failures arise not from natural inputs alone, but from strategic attempts to evade model policies and safeguards. However, existing general-purpose model development largely overlook this adversarial nature, and often remain insufficient for realistic safety scenarios involving planning, tool use, and multi-step reasoning, causing measured safety performance to overestimate real deployment robustness. To address this gap, we present Yuvion LLM, a large language model built for adversarially robust content safety and broader AI safety. Yuvion LLM treats adversarial robustness and agentic capability as first-class objectives. Its pipeline combines adversarially aware data construction, knowledge-enhanced continued pretraining, and policy-grounded multi-task safety post-training, including risk-aware supervised fine-tuning and reinforcement learning-based policy optimization, together with safety-aware agentic reinforcement learning for tool use and multi-step reasoning in complex safety scenarios. We further introduce the Yuvion LLM RiskEval (YLRE), a collection of 93 benchmarks across four evaluation categories, covering diverse open and internal evaluations with a focus on safety, adversarial robustness, and real-world capability requirements. Across these evaluations, Yuvion LLM demonstrates clear advantages on safety-focused benchmarks and particularly strong robustness under adversarial conditions, while maintaining solid overall capability. Notably, Yuvion-8B outperforms most state-of-the-art baselines, including substantially larger models such as GPT-5.4 and Qwen3-MAX, on several safety tasks.

cs.CL↗
arXiv2026

Yuvion VL: A Multimodal Foundation Model for Adversarial Content and AI Safety

General-purpose models often struggle to reliably identify and understand real-world multimodal risks, largely due to the inherent multimodal adversarial nature of content and AI safety. We present Yuvion VL, a family of multimodal large language models purpose-built for content and AI safety, with both instruction-tuned and reasoning-oriented variants. Yuvion VL addresses this gap by treating safety as an inherently adversarial and multimodal problem and designing the entire pipeline around adversarial robustness. For data construction, we develop an automated pipeline integrating adversarial-aware data synthesis with multi-stage quality control, producing large-scale, high-quality multimodal samples augmented with domain knowledge and reasoning annotations. For training, we adopt a three-stage pipeline that includes continued pretraining for risk-concept cross-modal alignment, instruct post-training for production-grade safety tasks, and reasoning post-training for enhanced interpretability and performance in complex tasks. We further introduce Confuse-then-Contrast Fine-Tuning, a contrastive framework that mines model-specific confusions and constructs multi-image contrastive groups to enforce explicit discrimination of fine-grained visual-semantic elements, enabling the model to distinguish between visually similar cases with different safety implications in adversarial safety tasks. To support rigorous evaluation, we further introduce Yuvion VL RiskEval (YVRE), a collection of benchmarks covering diverse open and internal evaluations, with a focus on content and AI safety, adversarial robustness, and real-world capability requirements. Experiments show that Yuvion VL-32B achieves industry-leading safety performance, surpassing comparably sized open-source models and best closed-source commercial models, while maintaining comparable general capabilities.

cs.CV↗
arXiv2026

TWLA: Achieving Ternary Weights and Low-Bit Activations for LLMs via Post-Training Quantization

Large language models (LLMs) exhibit exceptional general language processing capabilities, but their memory and compute costs hinder deployment. Ternarization has emerged as a promising compression technique, offering significant reductions in model size and inference complexity. However, existing methods struggle with heavy-tailed activation distributions and therefore keep activations in high precision, fundamentally limiting end-to-end inference acceleration. To overcome this limitation, we propose TWLA, a post-training quantization (PTQ) framework that achieves 1.58-bit weight compression and 4-bit activation quantization while maintaining high accuracy. TWLA comprises three components: (1) Euclidean-to-Manifold Asymmetric Ternary Quantizer (E2M-ATQ) minimizes layer-output error under weight ternarization via a two-stage optimization from Euclidean initialization to manifold relocation; (2) Kronecker Orthogonal Tri-Modal Shaping (KOTMS) applies a Kronecker-structured orthogonal rotation to reshape weights into ternary-friendly tri-modal distributions, while the shared rotation statistically suppresses activation outliers; and (3) Inter-Layer Aware Activation Mixed Precision (ILA-AMP) explicitly introduces adjacent-layer second-order interaction costs in bit allocation and jointly optimizes for the layer-wise disparity of activation quantization gains induced by the shared orthogonal transform, preventing cascades triggered by a few weak layers. Extensive experiments demonstrate that TWLA maintains high accuracy under W1.58A4, while delivering significant inference acceleration. The code is available at https://github.com/Kishon-zzx/TWLA.

cs.LG↗
arXiv2026

UVMarvel: an Automated LLM-aided UVM Machine for Subsystem-level RTL Verification

Verification presents a major bottleneck in Integrated Circuit (IC) development, consuming nearly 70% of total effort. While the Universal Verification Methodology (UVM) improves reuse through structured verification environments, constructing subsystem-level UVM testbenches and generating high-quality stimuli still require extensive manual coding, repeated EDA tool runs, and deep protocol and micro-architectural expertise. We present UVMarvel, an automated verification framework that leverages Large Language Models (LLMs) to build UVM testbenches for subsystem-level RTL. UVMarvel introduces an Intermediate Representation (IR) and a Bus Protocol Library to translate heterogeneous specifications into protocol-correct subsystem-level UVM testbenches, and employs a Signal Tracker and a Verilog Patching Library to guide LLM-based stimuli refinement. UVMarvel is the first framework capable of automatically constructing subsystem-level UVM testbenches across mainstream bus protocols, and it achieves an average code coverage of 95.65%, while reducing verification time from several human working days to a 4.5-hour automated execution.

cs.AR↗
arXiv2026

Strix: Re-thinking NPU Reliability from a System Perspective

DNNs and LLMs increasingly rely on hardware accelerators, including in safety-critical domains, while technology scaling and growing model complexity make hardware faults more frequent. Existing system-level mechanisms typically treat the NPU as a monolithic unit, using coarse-grained replication that incurs prohibitive performance and hardware overheads, leaving a gap between reliability requirements and deployable solutions. To bridge this gap, we present Strix, a full-stack NPU reliability framework on an open-source SoC, spanning micro-architecture, ISA, and programming methods. Strix re-partitions the NPU along the system inference pipeline, identifies dominant failure modes, and attaches targeted safeguards, achieving sub-micro-second fault localisation, error detection, and correction with only 1.04$\times$ slowdown and minimal hardware overhead.

cs.AR↗
arXiv2026

From Characterization to Microarchitecture: Designing an Elegant and Reliable BFP-Based NPU

Block Floating-Point (BFP) is emerging as an attractive data format for edge Neural Processing Units (NPUs), combining wide dynamic range with high hardware efficiency. However, its behavior under hardware faults and suitability for safety-critical deployments remain underexplored. Here, we present the first in-depth empirical reliability study of BFP-based NPUs. Using RTL-level fault injection on NPUs, our bit- and path-level analysis reveals pronounced heterogeneous vulnerabilities and shows conventional end-to-end check becomes ineffective under nonlinear block scaling. Guided by these insights, we design a fault-tolerant BFP-based NPU microarchitecture that aligns the BFP computational semantics with reliability constraints. The design uses a row/column-wise blocking strategy to decouple the fixed-point mantissa computations from the scalar exponent path, and introduces ultra-lightweight protection mechanisms for each. Experimental results demonstrate our design achieves near-dual modular redundancy reliability with only $3.55\%$ geometric mean performance overhead and less than $2\%$ hardware cost.

cs.AR↗
arXiv2026

OpenEarth-Agent: From Tool Calling to Tool Creation for Open-Environment Earth Observation

Earth Observation (EO) is essential for perceiving dynamic land surface changes, yet deploying autonomous EO in open environments is hindered by the immense diversity of multi-source data and heterogeneous tasks. While remote sensing agents have emerged to streamline EO workflows, existing tool-calling agents are confined to closed environments. They rely on pre-defined tools and are restricted to narrow scope, limiting their generalization to the diverse data and tasks. To overcome these limitations, we introduce OpenEarth-Agent, the first tool-creation agent framework tailored for open-environment EO. Rather than calling predefined tools, OpenEarth-Agent employs adaptive workflow planning and tool creation to generalize to unseen data and tasks. This adaptability is bolstered by an open-ended integration of multi-stage tools and cross-domain knowledge bases, enabling robust execution in the entire EO pipeline across multiple application domains. To comprehensively evaluate EO agents in open environments, we propose OpenEarth-Bench, a novel benchmark comprising 596 real-world, full-pipeline cases across seven application domains, explicitly designed to assess agents' adaptive planning and tool creation capabilities. Only essential pre-trained model tools are provided in this benchmark, devoid of any other predefined task-specific tools. Extensive experiments demonstrate that OpenEarth-Agent successfully masters full-pipeline EO across multiple domains in the open environment. Notably, on the cross-benchmark Earth-Bench, our tool-creating agent equipped with 6 essential pre-trained models achieves performance comparable to tool-calling agents relying on 104 specialized tools, and significantly outperforms them when provided with the complete toolset. In several cases, the created tools exhibit superior robustness to data anomalies compared to human-engineered counterparts.

cs.CV↗
arXiv2026

AkiraRust: Re-thinking LLM-aided Rust Repair Using a Feedback-guided Thinking Switch

Eliminating undefined behaviors (UBs) in Rust programs requires a deep semantic understanding to enable accurate and reliable repair. While existing studies have demonstrated the potential of LLMs to support Rust code analysis and repair, most frameworks remain constrained by inflexible templates or lack grounding in executable semantics, resulting in limited contextual awareness and semantic incorrectness. Here, we present AkiraRust, an LLM-driven repair and verification framework that incorporates a finite-state machine to dynamically adapt its detection and repair flow to runtime semantic conditions. AkiraRust introduces a dual-mode reasoning strategy that coordinates fast and slow thinking across multiple agents. Each agent is mapped to an FSM state, and a waveform-driven transition controller manages state switching, rollback decisions, and semantic check pointing, enabling context-aware and runtime-adaptive repair. Experimental results show that AkiraRust achieves about 92% semantic correctness and delivers a 2.2x average speedup compared to SOTA.

cs.SE↗
arXiv2026

EarthSpatialBench: Benchmarking Spatial Reasoning Capabilities of Multimodal LLMs on Earth Imagery

Benchmarking spatial reasoning in multimodal large language models (MLLMs) has attracted growing interest in computer vision due to its importance for embodied AI and other agentic systems that require precise interaction with the physical world. However, spatial reasoning on Earth imagery has lagged behind, as it uniquely involves grounding objects in georeferenced images and quantitatively reasoning about distances, directions, and topological relations using both visual cues and vector geometry coordinates (e.g., 2D bounding boxes, polylines, and polygons). Existing benchmarks for Earth imagery primarily focus on 2D spatial grounding, image captioning, and coarse spatial relations (e.g., simple directional or proximity cues). They lack support for quantitative direction and distance reasoning, systematic topological relations, and complex object geometries beyond bounding boxes. To fill this gap, we propose \textbf{EarthSpatialBench}, a comprehensive benchmark for evaluating spatial reasoning in MLLMs on Earth imagery. The benchmark contains over 325K question-answer pairs spanning: (1) qualitative and quantitative reasoning about spatial distance and direction; (2) systematic topological relations; (3) single-object queries, object-pair queries, and compositional aggregate group queries; and (4) object references expressed via textual descriptions, visual overlays, and explicit geometry coordinates, including 2D bounding boxes, polylines, and polygons. We conducted extensive experiments on both open-source and proprietary models to identify limitations in the spatial reasoning of MLLMs.

cs.CV↗
arXiv2026

NLI:Non-uniform Linear Interpolation Approximation of Nonlinear Operations for Efficient LLMs Inference

Large Language Models (LLMs) have demonstrated remarkable performance across a wide range of tasks, but their deployment is often constrained by substantial memory footprints and computational costs. While prior work has achieved significant progress in compressing and accelerating linear layers, nonlinear layers-such as SiLU, RMSNorm, and Softmax-still heavily depend on high-precision floating-point operations. In this paper, we propose a calibration-free, dynamic-programming-optimal, and hardware-friendly framework called Non-uniform Linear Interpolation (NLI). NLI is capable of efficiently approximating a variety of nonlinear functions, enabling seamless integration into LLMs and other deep neural networks with almost no loss in accuracy. NLI ingeniously recasts cutpoint selection as a dynamic-programming problem, achieving the globally minimal interpolation error in O(MxN2) time via Bellman's optimality principle. Based on the NLI algorithm, we also design and implement a plug-and-play universal nonlinear computation unit. Hardware experiments demonstrate that the NLI Engine achieves more than 4x improvement in computational efficiency compared to the state-of-the-art designs.

cs.LG↗
arXiv2026

CIM-Tuner: Balancing the Compute and Storage Capacity of SRAM-CIM Accelerator via Hardware-mapping Co-exploration

As an emerging type of AI computing accelerator, SRAM Computing-In-Memory (CIM) accelerators feature high energy efficiency and throughput. However, various CIM designs and under-explored mapping strategies impede the full exploration of compute and storage balancing in SRAM-CIM accelerator, potentially leading to significant performance degradation. To address this issue, we propose CIM-Tuner, an automatic tool for hardware balancing and optimal mapping strategy under area constraint via hardware-mapping co-exploration. It ensures universality across various CIM designs through a matrix abstraction of CIM macros and a generalized accelerator template. For efficient mapping with different hardware configurations, it employs fine-grained two-level strategies comprising accelerator-level scheduling and macro-level tiling. Compared to prior CIM mapping, CIM-Tuner's extended strategy space achieves 1.58$\times$ higher energy efficiency and 2.11$\times$ higher throughput. Applied to SOTA CIM accelerators with identical area budget, CIM-Tuner also delivers comparable improvements. The simulation accuracy is silicon-verified and CIM-Tuner tool is open-sourced at https://github.com/champloo2878/CIM-Tuner.git.

cs.AR↗
arXiv2026

$D^2Prune$: Sparsifying Large Language Models via Dual Taylor Expansion and Attention Distribution Awareness

Large language models (LLMs) face significant deployment challenges due to their massive computational demands. % While pruning offers a promising compression solution, existing methods suffer from two critical limitations: (1) They neglect activation distribution shifts between calibration data and test data, resulting in inaccurate error estimations; (2) They overlook the long-tail distribution characteristics of activations in the attention module. To address these limitations, this paper proposes a novel pruning method, $D^2Prune$. First, we propose a dual Taylor expansion-based method that jointly models weight and activation perturbations for precise error estimation, leading to precise pruning mask selection and weight updating and facilitating error minimization during pruning. % Second, we propose an attention-aware dynamic update strategy that preserves the long-tail attention pattern by jointly minimizing the KL divergence of attention distributions and the reconstruction error. Extensive experiments show that $D^2Prune$ consistently outperforms SOTA methods across various LLMs (e.g., OPT-125M, LLaMA2/3, and Qwen3). Moreover, the dynamic attention update mechanism also generalizes well to ViT-based vision models like DeiT, achieving superior accuracy on ImageNet-1K.

cs.LG↗
arXiv2026

VNU-Bench: A Benchmarking Dataset for Multi-Source Multimodal News Video Understanding

News videos are carefully edited multimodal narratives that combine narration, visuals, and external quotations into coherent storylines. In recent years, there have been significant advances in evaluating multimodal large language models (MLLMs) for news video understanding. However, existing benchmarks largely focus on single-source, intra-video reasoning, where each report is processed in isolation. In contrast, real-world news consumption is inherently multi-sourced: the same event is reported by different outlets with complementary details, distinct narrative choices, and sometimes conflicting claims that unfold over time. Robust news understanding, therefore, requires models to compare perspectives from different sources, align multimodal evidence across sources, and synthesize multi-source information. To fill this gap, we introduce VNU-Bench, the first benchmark for multi-source, cross-video understanding in the news domain. We design a set of new question types that are unique in testing models' ability of understanding multi-source multimodal news from a variety of different angles. We design a novel hybrid human-model QA generation process that addresses the issues of scalability and quality control in building a large dataset for cross-source news understanding. The dataset comprises 429 news groups, 1,405 videos, and 2,501 high-quality questions. Comprehensive evaluation of both closed- and open-source multimodal models shows that VNU-Bench poses substantial challenges for current MLLMs.

cs.LG↗
arXiv2025

Autoregressive Neural Network Extrapolation of Quantum Spin Dynamics Across Time and Space

Understanding the long-time dynamics of strongly correlated quantum matter remains a major challenge: as quantum entanglement grows during time evolution, conventional numerical methods become increasingly costly, limiting access to the long-range correlations and low-energy excitations that govern gapless systems. Here we show that these dynamical correlations can be extended beyond the accessible numerical window without explicitly evolving the underlying many-body wavefunction. We introduce an autoregressive machine-learning framework that enables the extrapolation of dynamical spin correlations in both time and space beyond the reach of conventional numerical methods. Trained on time-dependent density matrix renormalization group simulations of the gapless XXZ model, our approach is benchmarked against exact solutions available for this analytically solvable system. Combined with physics-informed spatial extension, a multi-layer perceptron model using ReLU activation functions has been shown to be superior to convolutional neural networks and linear regressions for longer time extrapolation. A study of error accumulation further demonstrates that our autoregressive neural network extrapolations are highly robust to perturbations, suggesting stable and reliable predictions. This work offers a complementary route to studying the dynamics of gapless quantum many-body systems, in which machine learning extends and complements the capabilities of state-of-the-art numerical approaches.

cond-mat.str-el↗