arXiv subjects

Yuan Li

Publications and source records attributed to Yuan Li.

At least 181 records · Page 10Linked to original sources

arXiv2025

Preemptive Holistic Collaborative System and Its Application in Road Transportation

Numerous real-world systems, including manufacturing processes, supply chains, and robotic systems, involve multiple independent entities with diverse objectives. The potential for conflicts arises from the inability of these entities to accurately predict and anticipate each other's actions. To address this challenge, we propose the Preemptive Holistic Collaborative System (PHCS) framework. By enabling information sharing and collaborative planning among independent entities, the PHCS facilitates the preemptive resolution of potential conflicts. We apply the PHCS framework to the specific context of road transportation, resulting in the Preemptive Holistic Collaborative Road Transportation System (PHCRTS). This system leverages shared driving intentions and pre-planned trajectories to optimize traffic flow and enhance safety. Simulation experiments in a two-lane merging scenario demonstrate the effectiveness of PHCRTS, reducing vehicle time delays by 90%, increasing traffic capacity by 300%, and eliminating accidents. The PHCS framework offers a promising approach to optimize the performance and safety of complex systems with multiple independent entities.

eess.SY↗

arXiv2025

Three Magnetization Peaks in HgBa$_2$Ca$_2$Cu$_3$O$_8$ Single Crystals

By measuring magnetization hysteresis loops of the superconducting HgBa$_2$Ca$_2$Cu$_3$O$_8$ single crystals ($T_{\rm c}$ = 133 K), we observed three magnetization peaks in a wide temperature region. This is in contrast to the previous observation that there are only two magnetization peaks in many superconductors. Detailed analysis finds that the second peak here evolves from a kinky structure at low temperatures and gets enhanced at high temperatures; the third peak evolves from a general broad peak at low temperatures and evolves into a sharp peak and even a step-like one at high temperatures. We propose a general phase diagram to interpret these peaks, the second peak is corresponding to the order-disorder transition, while the third peak is associated with the elastic-plastic crossover. Our work unifies the understanding of different "second peak" structures in different systems and thus sheds new light in understanding the vortex dynamics in type-II superconductors.

cond-mat.supr-con↗

arXiv2025

Enhancing Expressway Ramp Merge Safety and Efficiency via Spatiotemporal Cooperative Control

In the context of autonomous driving on expressways, the issue of ensuring safe and efficient ramp merging remains a significant challenge. Existing systems often struggle to accurately assess the status and intentions of other vehicles, leading to a persistent occurrence of accidents despite efforts to maintain safe distances. This study proposes a novel spatiotemporal cooperative control approach integrating vehicle-road coordination to address this critical issue. A comprehensive methodology is developed, beginning with the calculation of safe distances under varying spatiotemporal conditions. This involves considering multiple factors, including vehicle speed differentials, positioning errors, and clock synchronization errors. Subsequently, an advanced vehicle conflict risk evaluation model is constructed. By incorporating collision acceleration and emergency acceleration as key parameters, this model offers a more accurate and detailed evaluation of potential risks during the ramp merging process. Based on the calculated safe distances and conflict risk evaluations, a mainline priority coordinated control method is formulated. This method enables the pre-planning of vehicle trajectories, effectively reducing conflicts among vehicles. Through rigorous simulations using diverse traffic volume and speed scenarios, the efficacy of the proposed strategy is validated. The results demonstrate remarkable improvements, with the average delay time reduced by an impressive 97.96% and fuel consumption decreased by 6.01%. These outcomes indicate that the proposed approach not only enhances the speed of vehicle merging but also significantly reduces latency and fuel consumption, thereby enhancing the overall performance of ramp merging operations.

eess.SY↗

arXiv2025

Spatiotemporal Trajectory Tracking Method for Vehicles Incorporating Lead-Lag Judgement

In the domain of intelligent transportation systems, especially within the context of autonomous vehicle control, the preemptive holistic collaborative system has been presented as a promising solution to bring a remarkable enhancement in traffic efficiency and a substantial reduction in the accident rate, demonstrating a great potential of development. In order to ensure this system operates as intended, accurate tracking of the spatiotemporal trajectory is of crucial significance. Moreover, minimizing the tracking error is a necessary step in this process. To this end, a novel lead-lag judgment mechanism is proposed. This mechanism precisely quantifies the longitudinal positional deviation between the vehicle and the target trajectory over time, then the deviation is corrected with a real - time acceleration compensation strategy, as a result, the accuracy and reliability of trajectory tracking are significantly enhanced. Real - vehicle experiments were conducted in a dedicated test field to validate the feasibility of this innovative approach empirically. Subsequently, the obtained tracking data was subsequent processed using the lead-lag judgment mechanism. In this step, we carefully analyzed the spatiotemporal error patterns between the vehicle and the target trajectory under different alignments and speeds. Finally, using real highway speed and alignment data, we conducted comprehensive spatiotemporal trajectory tracking simulations. Through experiments and simulations, tracking errors maintained in an acceptable range and reasonable spatiotemporal distance is given during the preemptive merging process on highway ramps. Overall, this study offers valuable insights for highway ramp emerging safety. Future work can expand on these findings.

eess.SY↗

arXiv2025

On the multi-$\mathbf{q}$ characteristics of magnetic ground states of honeycomb cobalt oxides

The Kitaev honeycomb model has received significant attention for its exactly solvable quantum spin liquid ground states and fractionalized excitations. For realizing the model, layered cobalt oxides have been considered a promising platform. Yet, in contrast to the conventional wisdom about single-$\mathbf{q}$ zigzag magnetic order inferred from previous studies of the Na$_2$IrO$_3$ and $α$-RuCl$_3$ candidate materials, recent experiments on two of the representative honeycomb cobalt oxides, hexagonal Na$_2$Co$_2$TeO$_6$ and monoclinic Na$_3$Co$_2$SbO$_6$, have uncovered evidence for more complex multi-$\mathbf{q}$ variants of the zigzag order. This review surveys on experimental strategies to distinguish between single- and multi-$\mathbf{q}$ orders, along with the crystallographic symmetries of the cobalt oxides in comparison to the previously studied systems. General formation mechanism of multi-$\mathbf{q}$ order is also briefly discussed. The goal is to provide some rationales for examining the relevance of multi-$\mathbf{q}$ order in the honeycomb cobalt oxides, along with its implications on the microscopic model of these intriguing quantum magnets.

cond-mat.str-el↗

arXiv2025

Machine Learning Modeling for Multi-order Human Visual Motion Processing

Our research aims to develop machines that learn to perceive visual motion as do humans. While recent advances in computer vision (CV) have enabled DNN-based models to accurately estimate optical flow in naturalistic images, a significant disparity remains between CV models and the biological visual system in both architecture and behavior. This disparity includes humans' ability to perceive the motion of higher-order image features (second-order motion), which many CV models fail to capture because of their reliance on the intensity conservation law. Our model architecture mimics the cortical V1-MT motion processing pathway, utilizing a trainable motion energy sensor bank and a recurrent graph network. Supervised learning employing diverse naturalistic videos allows the model to replicate psychophysical and physiological findings about first-order (luminance-based) motion perception. For second-order motion, inspired by neuroscientific findings, the model includes an additional sensing pathway with nonlinear preprocessing before motion energy sensing, implemented using a simple multilayer 3D CNN block. When exploring how the brain acquired the ability to perceive second-order motion in natural environments, in which pure second-order signals are rare, we hypothesized that second-order mechanisms were critical when estimating robust object motion amidst optical fluctuations, such as highlights on glossy surfaces. We trained our dual-pathway model on novel motion datasets with varying material properties of moving objects. We found that training to estimate object motion from non-Lambertian materials naturally endowed the model with the capacity to perceive second-order motion, as can humans. The resulting model effectively aligns with biological systems while generalizing to both first- and second-order motion phenomena in natural scenes.

cs.CV↗

arXiv2025

Robust triple-q magnetic order with trainable spin vorticity in Na$_2$Co$_2$TeO$_6$

Recent studies suggest that the candidate Kitaev magnet Na$_2$Co$_2$TeO$_6$ possesses novel triple-$\mathbf{q}$ magnetic order instead of conventional single-$\mathbf{q}$ zigzag order. Here we present dedicated experiments in search for distinct properties expected of the triple-$\mathbf{q}$ order, namely, insensitivity of the magnetic domains to weak $C_3$ symmetry-breaking fields and fictitious magnetic fields generated by the spin vorticity. In structurally pristine single crystals, we show that $C_3$ symmetry-breaking in-plane uniaxial strains do not affect the order's magnetic neutron diffraction signals. We further show that $\mathbf{c}$-axis propagating light exhibits large Faraday rotations in the ordered state due to the spin vorticity, the sign of which can be trained via the system's ferrimagnetic moment. These results are in favor of the triple-$\mathbf{q}$ order in Na$_2$Co$_2$TeO$_6$ and reveal its unique emerging behavior.

cond-mat.str-el↗

arXiv2025

Self-adaptive vision-language model for 3D segmentation of pulmonary artery and vein

Accurate segmentation of pulmonary structures iscrucial in clinical diagnosis, disease study, and treatment planning. Significant progress has been made in deep learning-based segmentation techniques, but most require much labeled data for training. Consequently, developing precise segmentation methods that demand fewer labeled datasets is paramount in medical image analysis. The emergence of pre-trained vision-language foundation models, such as CLIP, recently opened the door for universal computer vision tasks. Exploiting the generalization ability of these pre-trained foundation models on downstream tasks, such as segmentation, leads to unexpected performance with a relatively small amount of labeled data. However, exploring these models for pulmonary artery-vein segmentation is still limited. This paper proposes a novel framework called Language-guided self-adaptive Cross-Attention Fusion Framework. Our method adopts pre-trained CLIP as a strong feature extractor for generating the segmentation of 3D CT scans, while adaptively aggregating the cross-modality of text and image representations. We propose a s pecially designed adapter module to fine-tune pre-trained CLIP with a self-adaptive learning strategy to effectively fuse the two modalities of embeddings. We extensively validate our method on a local dataset, which is the largest pulmonary artery-vein CT dataset to date and consists of 718 labeled data in total. The experiments show that our method outperformed other state-of-the-art methods by a large margin. Our data and code will be made publicly available upon acceptance.

cs.CV↗

arXiv2025

Distilling Desired Comments for Enhanced Code Review with Large Language Models

There has been a growing interest in using Large Language Models (LLMs) for code review thanks to their proven proficiency in code comprehension. The primary objective of most review scenarios is to generate desired review comments (DRCs) that explicitly identify issues to trigger code fixes. However, existing LLM-based solutions are not so effective in generating DRCs for various reasons such as hallucination. To enhance their code review ability, they need to be fine-tuned with a customized dataset that is ideally full of DRCs. Nevertheless, such a dataset is not yet available, while manual annotation of DRCs is too laborious to be practical. In this paper, we propose a dataset distillation method, Desiview, which can automatically construct a distilled dataset by identifying DRCs from a code review dataset. Experiments on the CodeReviewer dataset comprising more than 150K review entries show that Desiview achieves an impressive performance of 88.93%, 80.37%, 86.67%, and 84.44% in terms of Precision, Recall, Accuracy, and F1, respectively, surpassing state-of-the-art methods. To validate the effect of such a distilled dataset on enhancing LLMs' code review ability, we first fine-tune the latest LLaMA series (i.e., LLaMA 3 and LLaMA 3.1) to build model Desiview4FT. We then enhance the model training effect through KTO alignment by feeding those review comments identified as non-DRCs to the LLMs, resulting in model Desiview4FA. Verification results indicate that Desiview4FA slightly outperforms Desiview4FT, while both models have significantly improved against the base models in terms of generating DRCs. Human evaluation confirms that both models identify issues more accurately and tend to generate review comments that better describe the issues contained in the code than the base LLMs do.

cs.SE↗

arXiv2024

In situ Qubit Frequency Tuning Circuit for Scalable Superconducting Quantum Computing: Scheme and Experiment

Frequency tunable qubit plays a significant role for scalable superconducting quantum processors. The state-of-the-art room-temperature electronics for tuning qubit frequency suffers from unscalable limit, such as heating problem, linear growth of control cables, etc. Here we propose a scalable scheme to tune the qubit frequency by using in situ superconducting circuit, which is based on radio frequency superconducting quantum interference device (rf-SQUID). We demonstrate both theoretically and experimentally that the qubit frequency could be modulated by inputting several single pulses into rf-SQUID. Compared with the traditional scheme, our scheme not only solves the heating problem, but also provides the potential to exponentially reduce the number of cables inside the dilute refrigerator and the room-temperature electronics resource for tuning qubit frequency, which is achieved by a time-division-multiplex (TDM) scheme combining rf-SQUID with switch arrays. With such TDM scheme, the number of cables could be reduced from the usual $\sim 3n$ to $\sim \log_2{(3n)} + 1$ for two-dimensional quantum processors comprising $n$ qubits and $\sim 2n$ couplers. Our work paves the way for large-scale control of superconducting quantum processor.

quant-ph↗

arXiv2024

VLABench: A Large-Scale Benchmark for Language-Conditioned Robotics Manipulation with Long-Horizon Reasoning Tasks

General-purposed embodied agents are designed to understand the users' natural instructions or intentions and act precisely to complete universal tasks. Recently, methods based on foundation models especially Vision-Language-Action models (VLAs) have shown a substantial potential to solve language-conditioned manipulation (LCM) tasks well. However, existing benchmarks do not adequately meet the needs of VLAs and relative algorithms. To better define such general-purpose tasks in the context of LLMs and advance the research in VLAs, we present VLABench, an open-source benchmark for evaluating universal LCM task learning. VLABench provides 100 carefully designed categories of tasks, with strong randomization in each category of task and a total of 2000+ objects. VLABench stands out from previous benchmarks in four key aspects: 1) tasks requiring world knowledge and common sense transfer, 2) natural language instructions with implicit human intentions rather than templates, 3) long-horizon tasks demanding multi-step reasoning, and 4) evaluation of both action policies and language model capabilities. The benchmark assesses multiple competencies including understanding of mesh\&texture, spatial relationship, semantic instruction, physical laws, knowledge transfer and reasoning, etc. To support the downstream finetuning, we provide high-quality training data collected via an automated framework incorporating heuristic skills and prior information. The experimental results indicate that both the current state-of-the-art pretrained VLAs and the workflow based on VLMs face challenges in our tasks.

cs.RO↗

arXiv2024

Customized calibration sources in the JUNO experiment

We customized a laser calibration system and four radioactive $γ$-ray calibration sources for the Jiangmen Underground Neutrino Observatory (JUNO), a 20-kton liquid scintillator-based neutrino detector. The laser source system was updated to realize the isotropic light emission timing within $\pm0.25$~nsec level and to allow the tuning of the laser intensity covering more than four orders of magnitude. In addition, methods to prepare four different radioactive sources ($^{18}{\rm F}$, $^{40}{\rm K}$, $^{226}{\rm Ra}$, and $^{241}{\rm Am}$), covering energies from O(10)~keV to O(1)~MeV, for the JUNO detector were established in this study. The radioactivity of each source and the risk of impurities leaking into the detector from the source were confirmed to meet the experimental requirements.

physics.ins-det↗

arXiv2024

Establishing a New Benchmark in Quantum Computational Advantage with 105-qubit Zuchongzhi 3.0 Processor

In the relentless pursuit of quantum computational advantage, we present a significant advancement with the development of Zuchongzhi 3.0. This superconducting quantum computer prototype, comprising 105 qubits, achieves high operational fidelities, with single-qubit gates, two-qubit gates, and readout fidelity at 99.90%, 99.62% and 99.18%, respectively. Our experiments with an 83-qubit, 32-cycle random circuit sampling on Zuchongzhi 3.0 highlight its superior performance, achieving one million samples in just a few hundred seconds. This task is estimated to be infeasible on the most powerful classical supercomputers, Frontier, which would require approximately $6.4\times 10^9$ years to replicate the task. This leap in processing power places the classical simulation cost six orders of magnitude beyond Google's SYC-67 and SYC-70 experiments [Nature 634, 328(2024)], firmly establishing a new benchmark in quantum computational advantage. Our work not only advances the frontiers of quantum computing but also lays the groundwork for a new era where quantum processors play an essential role in tackling sophisticated real-world challenges.

quant-ph↗

arXiv2024

Sorting light's radial momentum and orbital angular momentum with a parabola-like lens

The orbital angular momentum and radial momentum both describe the transverse momentum of a light field. Efficient discriminating and sorting the two kinds of momentum lies at the heart of further application. Here, we propose a parabola-like lens that can transform the orbital angular momentum and the radial momentum into different positions in the parabolas. We experimentally characterize the performance of our implementation by separating individual angular and radial momentum as well as the multiple superposition states. The reported scheme can achieve two kinds of transverse momentum identification and thus provide a possible way to complete the characterization of the full transverse momentum of an optical field. The proposed device can readily be used in multiplexing and demultiplexing of optical information, and in principle, achieve unit efficiency, and thus can be suitable for applications that involve quantum states of light.

physics.optics↗

arXiv2024

Physical Origins of Outflowing Cold Clouds in Local Star-forming Dwarf Galaxies

We study the physical origins of outflowing cold clouds in a sample of 14 low-redshift dwarf ($M_{\ast} \lesssim 10^{10}$ $M_{\odot}$) galaxies from the COS Legacy Archive Spectroscopic SurveY (CLASSY) using Keck/ESI data. Outflows are traced by broad (FWHM ~ 260 $\rm{km}$ $\rm{s^{-1}}$) and very-broad (VB; FWHM ~ 1200 $\rm{km}$ $\rm{s^{-1}}$) velocity components in strong emission lines like [O III] $λ5007$ and $\rm{H}α$. The maximum velocities ($v_{\rm{max}}$) of broad components correlate positively with SFR, unlike the anti-correlation observed for VB components, and are consistent with superbubble models. In contrast, supernova-driven galactic wind models better reproduce the $v_{\rm{max}}$ of VB components. Direct radiative cooling from a hot wind significantly underestimates the luminosities of both broad and VB components. A multi-phase wind model with turbulent radiative mixing reduces this discrepancy to at least one dex for most VB components. Stellar photoionization likely provides additional energy since broad components lie in the starburst locus of excitation diagnostic diagrams. We propose a novel interpretation of outflow origins in star-forming dwarf galaxies$-$broad components trace expanding superbubble shells, while VB components originate from galactic winds. One-zone photoionization models fail to explain the low-ionization lines ([S II] and [O I]) of broad components near the maximal starburst regime, which two-zone photoionization models with density-bounded channels instead reproduce. These two-zone models indicate anisotropic leakage of Lyman continuum photons through low-density channels formed by expanding superbubbles. Our study highlights extreme outflows ($v_{\rm{max}} \gtrsim 1000$ $\rm{km}$ $\rm{s^{-1}}$) in 9 out of 14 star-forming dwarf galaxies, comparable to AGN-driven winds.

astro-ph.GA↗

arXiv2024

MetaTool Benchmark for Large Language Models: Deciding Whether to Use Tools and Which to Use

Large language models (LLMs) have garnered significant attention due to their impressive natural language processing (NLP) capabilities. Recently, many studies have focused on the tool utilization ability of LLMs. They primarily investigated how LLMs effectively collaborate with given specific tools. However, in scenarios where LLMs serve as intelligent agents, as seen in applications like AutoGPT and MetaGPT, LLMs are expected to engage in intricate decision-making processes that involve deciding whether to employ a tool and selecting the most suitable tool(s) from a collection of available tools to fulfill user requests. Therefore, in this paper, we introduce MetaTool, a benchmark designed to evaluate whether LLMs have tool usage awareness and can correctly choose tools. Specifically, we create a dataset called ToolE within the benchmark. This dataset contains various types of user queries in the form of prompts that trigger LLMs to use tools, including both single-tool and multi-tool scenarios. Subsequently, we set the tasks for both tool usage awareness and tool selection. We define four subtasks from different perspectives in tool selection, including tool selection with similar choices, tool selection in specific scenarios, tool selection with possible reliability issues, and multi-tool selection. We conduct experiments involving eight popular LLMs and find that the majority of them still struggle to effectively select tools, highlighting the existing gaps between LLMs and genuine intelligent agents. However, through the error analysis, we found there is still significant room for improvement. Finally, we conclude with insights for tool developers -- we strongly recommend that tool developers choose an appropriate rewrite model for generating new descriptions based on the downstream LLM the tool will apply to. Our code is in https://github.com/HowieHwong/MetaTool.

cs.SE↗

arXiv2024

IMNet: Interference-Aware Channel Knowledge Map Construction and Localization

This paper presents a novel two-stage method for constructing channel knowledge maps (CKMs) specifically for A2G (Aerial-to-Ground) channels in the presence of non-cooperative interfering nodes (INs). We first estimate the interfering signal strength (ISS) at sampling locations based on total received signal strength measurements and the desired communication signal strength (DSS) map constructed with environmental topology. Next, an ISS map construction network (IMNet) is proposed, where a negative value correction module is included to enable precise reconstruction. Subsequently, we further execute signal-to-interference-plus-noise ratio map construction and IN localization. Simulation results demonstrate lower construction error of the proposed IMNet compared to baselines in the presence of interference.

eess.SP↗

arXiv2024

Manipulating the Optical Response of TaIrTe4 Heterostructures through Band Alignment Strategy

Weyl semimetals, such as $TaIrTe_{4}$, characterized by their unique band structures and exotic transport phenomena, have become a central focus in modern electronics. Despite extensive research, a systematic understanding of the impact of heterogeneous integration on the electronic and optical properties of TaIrTe4 device remains elusive. We have carried out density functional theory combined with nonequilibrium Green's function formalism calculations for $TaIrTe_{4}/WTe_{2}$, $TaIrTe_{4}/MoTe_{2}$ and $TaIrTe_{4}/h-BN$ heterostructures, aiming to understand the manipulation of photoresponse through various band alignment strategies. The underlying impacts of interlayer interactions, charge transfer and build-in electric field on the electronic properties are carefully investigated. We design a dual-probe photodetector device to understand the overall photoresponse enhancement of the heterogeneous integration by decomposing into the specific strain, interlayer transition, band overlap and symmetry lowering mechanics. These van der Waals integrations provide an ideal platform for studying band alignment physics in self-powered optoelectronic devices.

cond-mat.mtrl-sci↗