arXiv subjects

Yu-Ming Lin

Publications and source records attributed to Yu-Ming Lin.

At least 19 recordsLinked to original sources

arXiv2022

Preservation of the harmonic overtones in the violin family beyond Stradivari

Three hundred years ago, Antonio Stradivari enjoyed the golden period of the violin making in the human history. Luthiers and researchers endeavor to study his legendary legacy. Unfortunately, a consensus that the present progress has reached his level remains lacking. Most of the instruments suffer from low sounding power and enigmatic deficit of harmonic overtones. In fact, there is significant energy dissipation in the acoustic couplings in the violin family, completely unaware to luthiers and researchers. The current acoustic mechanism is inefficient in resonance of the wooden plates and hence is the low rate of mechanical energy conversion to the desired sound. We propose a new method for the amelioration of the acoustic couplings to enhance the preservation of the overtone components up to 161% of the pristine and to reduce the instrumental dissipation intensity up to 3.8 dB off (73% off). It results in the tremendously improved sound projection, the shorter reaction time, the longer reverberation time, and consequently the enrichment of the timbre complexity. Our physical method is applicable to the violin family of all sizes and ages, including the Stradivari, and extendable to all string instruments.

physics.class-ph↗

arXiv2012

High-frequency performance of scaled carbon nanotube array field-effect transistors

We report the radio-frequency performance of carbon nanotube array transistors that have been realized through the aligned assembly of highly separated, semiconducting carbon nanotubes on a fully scalable device platform. At a gate length of 100 nm, we observe output current saturation and obtain as-measured, extrinsic current gain and power gain cut-off frequencies, respectively, of 7 GHz and 15 GHz. While the extrinsic current gain is comparable to the state-of-the-art the extrinsic power gain is improved. The de-embedded, intrinsic current gain and power gain cut-off frequencies of 153 GHz and 30 GHz are the highest values experimentally achieved to date. We analyze the consistency of DC and AC performance parameters and discuss the requirements for future applications of carbon nanotube array transistors in high-frequency electronics.

cond-mat.mtrl-sci↗

arXiv2011

Enhanced Performance in Epitaxial Graphene FETs with Optimized Channel Morphology

This letter reports the impact of surface morphology on the carrier transport and RF performance of graphene FETs formed on epitaxial graphene films synthesized on SiC substrates. Such graphene exhibits long terrace structures with widths between 3-5 {\mu}m and steps of 10\pm2 nm in height. While a carrier mobility above 3000 cm2/Vs at a carrier density of 1e12 cm-2 is obtained in a single graphene terrace domain at room temperature, the step edges can result in a vicinal step resistance of ~21 k{\Omega}.{\mu}m. By orienting the transistor layout so that the entire channel lies within a single graphene terrace, and reducing the access resistance associated with the ungated part of the channel, a cut-off frequency above 200 GHz is achieved for graphene FETs with channel lengths of 210 nm, which is the highest value reported on epitaxial graphene thus far.

cond-mat.mes-hall↗

arXiv2011

Ultimate RF Performance Potential of Carbon Electronics

Carbon electronics based on carbon nanotube array field-effect transistors (AFETs) and 2-dimensional graphene field-effect transistors (GFETs) have recently attracted significant attention for potential RF applications. Here, we explore the ultimate RF performance potential for these two unique devices using semi-classical ballistic transport simulations. It is shown that the intrinsic current-gain and power-gain cutoff frequencies (fT and fMAX) above 1 THz should be possible in both AFETs and GFETs. Thus, both devices could deliver higher cut-off frequencies than traditional semiconductors such as Si and III-V's. In the case of AFETs, we show that their RF operation is not sensitive to the diameter variation of semiconducting tubes and the presence of metallic tubes in the channel. The ultimate fT and fMAX values in AFETs are observed to be higher than that in GFETs. The optimum device biasing conditions for AFETs require smaller biasing currents, and thus, lower power dissipation compared to GFETs. The degradation in high-frequency performance in the presence of external parasitics is also seen to be lower in AFETs compared to GFETs.

cond-mat.mes-hall↗

arXiv2011

High On-Off Ratio Bilayer Graphene Complementary Field Effect Transistors

In this paper, we propose a novel S/D engineering for dual-gated Bilayer Graphene (BLG) Field Effect Transistor (FET) using doped semiconductors (with a bandgap) as source and drain to obtain unipolar complementary transistors. To simulate the device, a self-consistent Non-Equilibrium Green's Function (NEGF) solver has been developed and validated against published experimental data. Using the simulator, we predict an on-off ratio in excess of $10^4$ and a subthreshold slope of ~110mV/decade with excellent scalability and current saturation, for a 20nm gate length unipolar BLG FET. However, the performance of the proposed device is found to be strongly dependent on the S/D series resistance effect. The obtained results show significant improvements over existing reports, marking an important step towards bilayer graphene logic devices.

cond-mat.mes-hall↗

arXiv2010

Multi-carrier Transport in Epitaxial Multi-layer Graphene

Variable-field Hall measurements were performed on epitaxial graphene grown on Si-face and C-face SiC. The carrier transport involves essentially a single-type of carrier in few-layer graphene, regardless of SiC face. However, in multi-layer graphene (MLG) grown on C-face SiC, the Hall measurements indicated the existence of several groups of carriers with distinct mobilities. Electrical transport in MLG can be properly described by invoking three independent conduction channels in parallel. Two of these are n- and p-type, while the third involves nearly intrinsic graphene. The carriers in this lightly doped channel have significantly higher mobilities than the other two.

cond-mat.mes-hall↗

arXiv2010

External Bias Dependent Direct To Indirect Bandgap Transition in Graphene Nanoribbon

In this work, using self-consistent tight-binding calculations, for the first time, we show that a direct to indirect bandgap transition is possible in an armchair graphene nanoribbon by the application of an external bias along the width of the ribbon, opening up the possibility of new device applications. With the help of Dirac equation, we qualitatively explain this bandgap transition using the asymmetry in the spatial distribution of the perturbation potential produced inside the nanoribbon by the external bias. This is followed by the verification of the bandgap trends with a numerical technique using Magnus expansion of matrix exponentials. Finally, we show that the carrier effective masses possess tunable sharp characters in the vicinity of the bandgap transition points.

cond-mat.mes-hall↗

arXiv2010

Wafer-scale Epitaxial Graphene Growth on the Si-face of Hexagonal SiC (0001) for High Frequency Transistors

Up to two layers of epitaxial graphene have been grown on the Si-face of two-inch SiC wafers exhibiting room-temperature Hall mobilities up to 1800 cm^2/Vs, measured from ungated, large, 160 micron x 200 micron Hall bars, and up to 4000 cm^2/Vs, from top-gated, small, 1 micron x 1.5 micron Hall bars. The growth process involved a combination of a cleaning step of the SiC in a Si-containing gas, followed by an annealing step in Argon for epitaxial graphene formation. The structure and morphology of this graphene has been characterized using AFM, HRTEM, and Raman spectroscopy. Furthermore, top-gated radio frequency field effect transistors (RF-FETs) with a peak cutoff frequency fT of 100 GHz for a gate length of 240 nm were fabricated using epitaxial graphene grown on the Si face of SiC that exhibited Hall mobilities up to 1450 cm^2/Vs from ungated Hall bars and 1575 cm^2/Vs from top-gated ones. This is by far the highest cut-off frequency measured from any kind of graphene.

cond-mat.mtrl-sci↗

arXiv2010

Intrinsic Limits of Subthreshold Slope in Biased Bilayer Graphene Transistor

In this work, we investigate the intrinsic limits of subthreshold slope in a dual gated bilayer graphene transistor using a coupled self-consistent Poisson-bandstructure solver. We benchmark the solver by matching the bias dependent bandgap results obtained from the solver against published experimental data. We show that the intrinsic bias dependence of the electronic structure and the self-consistent electrostatics limit the subthreshold slope obtained in such a transistor well above the Boltzmann limit of 60mV/decade at room temperature, but much below the results experimentally shown till date, indicating room for technological improvement of bilayer graphene.

cond-mat.mes-hall↗

arXiv2010

100 GHz Transistors from Wafer Scale Epitaxial Graphene

High-performance graphene field-effect transistors have been fabricated on epitaxial graphene synthesized on a two-inch SiC wafer, achieving a cutoff frequency of 100 GHz for a gate length of 240 nm. The high-frequency performance of these epitaxial graphene transistors not only shows the highest speed for any graphene devices up to date, but it also exceeds that of Si MOSFETs at the same gate length. The result confirms the high potential of graphene for advanced electronics applications, marking an important milestone for carbon electronics.

cond-mat.mtrl-sci↗

arXiv2009

Dual Gate Graphene FETs with fT of 50 GHz

A dual-gate graphene field-effect transistors is presented, which shows improved RF performance by reducing the access resistance using electrostatic doping. With a carrier mobility of 2700 cm2/Vs, a cutoff frequency of 50 GHz is demonstrated in a 350-nm gate length device. This fT value is the highest frequency reported to date for any graphene transistor, and it also exceeds that of Si MOSFETs at the same gate length, illustrating the potential of graphene for RF applications.

cond-mat.mes-hall↗

arXiv2009

Utilization of a Buffered Dielectric to Achieve High Field-Effect Carrier Mobility in Graphene Transistors

We utilize an organic polymer buffer layer between graphene and conventional gate dielectrics in top-gated graphene transistors. Unlike other insulators, this dielectric stack does not significantly degrade carrier mobility, allowing for high field-effect mobilities to be retained in top-gate operation. This is demonstrated in both two-point and four-point analysis, and in the high-frequency operation of a graphene transistor. Temperature dependence of the carrier mobility suggests that phonons are the dominant scatterers in these devices.

cond-mat.mtrl-sci↗

arXiv2008

Chemical Doping and Electron-Hole Conduction Asymmetry in Graphene Devices

We investigate polyethylene imine and diazonium salts as stable, complementary dopants on graphene. Transport in graphene devices doped with these molecules exhibits asymmetry in electron and hole conductance. The conductance of one carrier is preserved, while the conductance of the other carrier decreases. Simulations based on nonequilibrium Green's function formalism suggest that the origin of this asymmetry is imbalanced carrier injection from the graphene electrodes caused by misalignment of the electrode and channel neutrality points.

cond-mat.mes-hall↗

arXiv2008

Operation of Graphene Transistors at GHz Frequencies

Top-gated graphene transistors operating at high frequencies (GHz) have been fabricated and their characteristics analyzed. The measured intrinsic current gain shows an ideal 1/f frequency dependence, indicating an FET-like behavior for graphene transistors. The cutoff frequency fT is found to be proportional to the dc transconductance gm of the device. The peak fT increases with a reduced gate length, and fT as high as 26 GHz is measured for a graphene transistor with a gate length of 150 nm. The work represents a significant step towards the realization of graphene-based electronics for high-frequency applications.

cond-mat.other↗

arXiv2008

Conductance Quantization in Graphene Nanoribbons

We report the experimental observation of conductance quantization in graphene nanoribbons, where 1D transport subbands are formed due to the lateral quantum confinement. We show that this quantization in graphene nanoribbons can be observed at temperatures as high as 80 K and channel lengths as long as 1.7 $μ$m. The observed quantization is in agreement with that predicted by theoretical calculations.

cond-mat.mes-hall↗

arXiv2008

Strong Suppression of Electrical Noise in Bilayer Graphene Nano Devices

Low-frequency 1/f noise is ubiquitous, and dominates the signal-to-noise performance in nanodevices. Here we investigate the noise characteristics of single-layer and bilayer graphene nano-devices, and uncover an unexpected 1/f noise behavior for bilayer devices. Graphene is a single layer of graphite, where carbon atoms form a 2D honeycomb lattice. Despite the similar composition, bilayer graphene (two graphene monolayers stacked in the natural graphite order) is a distinct 2D system with a different band structure and electrical properties. In graphene monolayers, the 1/f noise is found to follow Hooge's empirical relation with a noise parameter comparable to that of bulk semiconductors. However, this 1/f noise is strongly suppressed in bilayer graphene devices, and exhibits an unusual dependence on the carrier density, different from most other materials. The unexpected noise behavior in graphene bilayers is associated with its unique band structure that varies with the charge distribution among the two layers, resulting in an effective screening of potential fluctuations due to external impurity charges. The findings here point to exciting opportunities for graphene bilayers in low-noise applications.

cond-mat.mtrl-sci↗

arXiv2007

Graphene Nano-Ribbon Electronics

We have fabricated graphene nano-ribbon field-effect transistor devices and investigated their electrical properties as a function of ribbon width. Our experiments show that the resistivity of a ribbon increases as its width decreases, indicating the impact of edge states. Analysis of temperature dependent measurements suggests a finite quantum confinement gap opening in narrow ribbons. The electrical current noise of the graphene ribbon devices at low frequency is found to be dominated by the 1/f noise.

cond-mat.mtrl-sci↗

arXiv2005

Low-frequency Current Fluctuations in Individual Semiconducting Single-Wall Carbon Nanotubes

We present a systematic study on low-frequency current fluctuations of nano-devices consisting of one single semiconducting nanotube, which exhibit significant 1/f-type noise. By examining devices with different switching mechanisms, carrier types (electrons vs. holes), and channel lengths, we show that the 1/f fluctuation level in semiconducting nanotubes is correlated to the total number of transport carriers present in the system. However, the 1/f noise level per carrier is not larger than that of most bulk conventional semiconductors, e.g. Si. The pronounced noise level observed in nanotube devices simply reflects on the small number of carriers involved in transport. These results not only provide the basis to quantify the noise behavior in a one-dimensional transport system, but also suggest a valuable way to characterize low-dimensional nanostructures based on the 1/f fluctuation phenomenon.

cond-mat.mtrl-sci↗