arXiv subjects

Xudong Wang

Publications and source records attributed to Xudong Wang.

At least 91 records · Page 5Linked to original sources

arXiv2025

Ultrasensitive Magnetometer based on Cusp Points of the Photon-Magnon Synchronization Mode

Ultrasensitive magnetometers based on spin resonances have led to remarkable achievements. However, the gyromagnetic ratios of these spin resonances that determine the responsivity of magnetometers to weak magnetic fields are inherently constrained by the Land$\acute{e}$ g-factor of particles, such as the electron, with a constant gyromagnetic ratio of $γ_e=2π\times28$ GHz/T. Here, we demonstrate an ultrasensitive magnetometer based on the cusp point (CP) of photon-magnon synchronization modes (PMSMs). The PMSM's gyromagnetic ratio at the CP is enhanced to $37γ_e$ and further amplified to $236γ_e$ by utilizing the sixth-order oscillating mode of the PMSM. Moreover, the emission linewidth of the PMSM can be reduced to 0.06 Hz, resulting in excellent sensitivity to weak magnetic fields. These outstanding properties position our magnetometer to potentially achieve superior sensitivity to conventional magnetometers. Our work introduces a cost-effective prototype for the next generation of magnetometry, and may advance scientific research and technologies that rely on ultrasensitive magnetic field detection.

cond-mat.mes-hall↗

arXiv2025

SPIDER: Structure-Preferential Implicit Deep Network for Biplanar X-ray Reconstruction

Biplanar X-ray imaging is widely used in health screening, postoperative rehabilitation evaluation of orthopedic diseases, and injury surgery due to its rapid acquisition, low radiation dose, and straightforward setup. However, 3D volume reconstruction from only two orthogonal projections represents a profoundly ill-posed inverse problem, owing to the intrinsic lack of depth information and irreducible ambiguities in soft-tissue visualization. Some existing methods can reconstruct skeletal structures and Computed Tomography (CT) volumes, they often yield incomplete bone geometry, imprecise tissue boundaries, and a lack of anatomical realism, thereby limiting their clinical utility in scenarios such as surgical planning and postoperative assessment. In this study, we introduce SPIDER, a novel supervised framework designed to reconstruct CT volumes from biplanar X-ray images. SPIDER incorporates tissue structure as prior (e.g., anatomical segmentation) into an implicit neural representation decoder in the form of joint supervision through a unified encoder-decoder architecture. This design enables the model to jointly learn image intensities and anatomical structures in a pixel-aligned fashion. To address the challenges posed by sparse input and structural ambiguity, SPIDER directly embeds anatomical constraints into the reconstruction process, thereby enhancing structural continuity and reducing soft-tissue artifacts. We conduct comprehensive experiments on clinical head CT datasets and show that SPIDER generates anatomically accurate reconstructions from only two projections. Furthermore, our approach demonstrates strong potential in downstream segmentation tasks, underscoring its utility in personalized treatment planning and image-guided surgical navigation.

eess.IV↗

arXiv2025

Chain-of-Thought for Large Language Model-empowered Wireless Communications

Recent advances in large language models (LLMs) have opened new possibilities for automated reasoning and decision-making in wireless networks. However, applying LLMs to wireless communications presents challenges such as limited capability in handling complex logic, generalization, and reasoning. Chain-of-Thought (CoT) prompting, which guides LLMs to generate explicit intermediate reasoning steps, has been shown to significantly improve LLM performance on complex tasks. Inspired by this, this paper explores the application potential of CoT-enhanced LLMs in wireless communications. Specifically, we first review the fundamental theory of CoT and summarize various types of CoT. We then survey key CoT and LLM techniques relevant to wireless communication and networking. Moreover, we introduce a multi-layer intent-driven CoT framework that bridges high-level user intent expressed in natural language with concrete wireless control actions. Our proposed framework sequentially parses and clusters intent, selects appropriate CoT reasoning modules via reinforcement learning, then generates interpretable control policies for system configuration. Using the unmanned aerial vehicle (UAV) network as a case study, we demonstrate that the proposed framework significantly outperforms a non-CoT baseline in both communication performance and quality of generated reasoning.

cs.NI↗

arXiv2025

Efficient Feature Fusion for UAV Object Detection

Object detection in unmanned aerial vehicle (UAV) remote sensing images poses significant challenges due to unstable image quality, small object sizes, complex backgrounds, and environmental occlusions. Small objects, in particular, occupy small portions of images, making their accurate detection highly difficult. Existing multi-scale feature fusion methods address these challenges to some extent by aggregating features across different resolutions. However, they often fail to effectively balance the classification and localization performance for small objects, primarily due to insufficient feature representation and imbalanced network information flow. In this paper, we propose a novel feature fusion framework specifically designed for UAV object detection tasks to enhance both localization accuracy and classification performance. The proposed framework integrates hybrid upsampling and downsampling modules, enabling feature maps from different network depths to be flexibly adjusted to arbitrary resolutions. This design facilitates cross-layer connections and multi-scale feature fusion, ensuring improved representation of small objects. Our approach leverages hybrid downsampling to enhance fine-grained feature representation, improving spatial localization of small targets, even under complex conditions. Simultaneously, the upsampling module aggregates global contextual information, optimizing feature consistency across scales and enhancing classification robustness in cluttered scenes. Experimental results on two public UAV datasets demonstrate the effectiveness of the proposed framework. Integrated into the YOLO-v10 model, our method achieves a 2% improvement in average precision (AP) compared to the baseline YOLO-v10 model, while maintaining the same number of parameters. These results highlight the potential of our framework for accurate and efficient UAV object detection.

cs.CV↗

arXiv2025

On-chip Non-Hermitian Cavity Quantum Electrodynamics

Exceptional points (EPs) promise revolutionary control over quantum light-matter interactions. Here, we experimentally demonstrate flexible and reversible engineering of quantum vacuum fluctuation in an integrated microcavity supporting chiral Eps. We develop a hybrid lithium niobate (LN)-GaAs quantum photonic platform, seamlessly combining high-quality quantum emitters, a low-loss photonic circuit, efficient electro-optic (EO) effect, and local strain actuator in a single device. Chiral EPs are implemented by dynamically tuning the coupling between the modes associated with a micro-ring resonator, resulting in anomalous spontaneous emission dynamic with a 7-fold modulation of the lifetime (120 ps to 850 ps). Meanwhile, we reshape single-photon spectra via cavity local density of states (LDOS) engineering and generate non-Lorentzian spectral profiles: squared-Lorentzian, Fano-like, and EP-induced transparency (EPIT), a suppression of emission at zero detuning. This work unveils exotic cavity quantum electrodynamics (cQED) effects unique to EPs and establishes a universal paradigm for non-Hermitian quantum photonics.

physics.optics↗

arXiv2025

MMHCL: Multi-Modal Hypergraph Contrastive Learning for Recommendation

The burgeoning presence of multimodal content-sharing platforms propels the development of personalized recommender systems. Previous works usually suffer from data sparsity and cold-start problems, and may fail to adequately explore semantic user-product associations from multimodal data. To address these issues, we propose a novel Multi-Modal Hypergraph Contrastive Learning (MMHCL) framework for user recommendation. For a comprehensive information exploration from user-product relations, we construct two hypergraphs, i.e. a user-to-user (u2u) hypergraph and an item-to-item (i2i) hypergraph, to mine shared preferences among users and intricate multimodal semantic resemblance among items, respectively. This process yields denser second-order semantics that are fused with first-order user-item interaction as complementary to alleviate the data sparsity issue. Then, we design a contrastive feature enhancement paradigm by applying synergistic contrastive learning. By maximizing/minimizing the mutual information between second-order (e.g. shared preference pattern for users) and first-order (information of selected items for users) embeddings of the same/different users and items, the feature distinguishability can be effectively enhanced. Compared with using sparse primary user-item interaction only, our MMHCL obtains denser second-order hypergraphs and excavates more abundant shared attributes to explore the user-product associations, which to a certain extent alleviates the problems of data sparsity and cold-start. Extensive experiments have comprehensively demonstrated the effectiveness of our method. Our code is publicly available at: https://github.com/Xu107/MMHCL.

cs.IR↗

arXiv2025

Rethinking Patch Dependence for Masked Autoencoders

In this work, we examine the impact of inter-patch dependencies in the decoder of masked autoencoders (MAE) on representation learning. We decompose the decoding mechanism for masked reconstruction into self-attention between mask tokens and cross-attention between masked and visible tokens. Our findings reveal that MAE reconstructs coherent images from visible patches not through interactions between patches in the decoder but by learning a global representation within the encoder. This discovery leads us to propose a simple visual pretraining framework: cross-attention masked autoencoders (CrossMAE). This framework employs only cross-attention in the decoder to independently read out reconstructions for a small subset of masked patches from encoder outputs. This approach achieves comparable or superior performance to traditional MAE across models ranging from ViT-S to ViT-H and significantly reduces computational requirements. By its design, CrossMAE challenges the necessity of interaction between mask tokens for effective masked pretraining. Code and models are publicly available: https://crossmae.github.io

cs.CV↗

arXiv2025

Hybrid and scalable photonic circuit cavity quantum electrodynamics

Similar to superconducting circuit quantum electrodynamics (cQED), the development of a photonic analog--specifically, photonic circuit cQED--has become a major focus in integrated quantum photonics. Current solid-state cQED devices, however, face scalability challenges due to the difficulty in simultaneously spectral tuning of cavity modes and quantum emitters while ensuring in-plane optical modes confinement for efficient on-chip light routing. Here, we overcome these limitations by proposing and demonstrating a hybrid solid-state cQED platform integrated on a chip. Our device integrates semiconducting quantum dots (QDs) with a thin-film lithium niobate (TFLN) microring resonator. Leveraging TFLN's ferroelectric and electro-optic (EO) properties, we implement local spectral tuning of both waveguide-coupled QDs and cavity modes. This approach achieves a broad spectral tuning range of up to 4.82 nm for individual QDs, enabling deterministic on-chip single-photon emission with a Purcell factor of 3.52. When combined with EO cavity tuning, we realize a spectrally tunable hybrid photonic circuit cQED device, sustaining near-constant Purcell factors of 1.89 over a 0.30 nm spectral range. This achievement enables scalable on-chip cavity-enhanced single-photon sources while preserving optical properties and maintaining compatibility with advanced photonic architectures, marking a significant step toward practical implementation of large-scale chip-based quantum networks.

quant-ph↗

arXiv2025

Large-scale quantum-dot-lithium-niobate hybrid integrated photonic circuits enabling on-chip quantum networking

Hybrid integrated quantum photonics combines solid-state artificial atoms with reconfigurable photonic circuits, enabling scalable chip-based quantum networks. Self-assembled quantum dots (QDs) are ideal for this goal due to their ability to generate highly indistinguishable single photons with exceptional brightness. Integrating QDs into low-loss photonic circuits can facilitate complex quantum networks by enabling entanglement transfer via two-photon interference. However, challenges such as limited scalability, spectral inhomogeneity, and quantum interference between independent sources remain. We present a hybrid photonic architecture that integrates QD-containing waveguides with low-loss lithium niobate (LN) circuits, incorporating 20 deterministic single-photon sources (SPSs). Using the piezoelectric properties of thin-film lithium niobate (TFLN), we achieve on-chip local spectral tuning of QD emissions by up to 7.7 meV,three orders of magnitude greater than the transform-limited linewidth. This approach enables on-chip quantum interference with a visibility of 0.73 between two spatially separated QD SPSs connected by 0.48 mm long waveguides, establishing a functional quantum network.The large-scale integration of spectrally tunable QD-based SPSs into low-loss LN circuits, combined with fast electro-optical switching, paves the way for compact, lightweight, and scalable photonic quantum networks.

quant-ph↗

arXiv2025

Robust Predictive Routing for Internet of Vehicles Leveraging Both V2I and V2V Links

With the developments of the Internet of Vehicles (IoV) from 4G to 5G, vehicle-to-infrastructure (V2I) communications are becoming attractive for vehicle users (VUEs) to obtain diverse cloud service through base stations (BSs). To tackle V2I link deterioration caused by blockage and out-of-coverage cases, multi-hop V2X routing with both vehicle-to-vehicle (V2V) and V2I links needs to be investigated. However, traditional routing reacts to statistical or real-time information, which may suffer link degradation during path switchover in fast-changing vehicular networks. Predictive routing protocols take timely actions by forecasting link connectivity, but they fail to satisfy specific QoS requirements. Low robustness to link failures is also incurred without considering imperfect prediction. To build continual paths between VUEs and BSs for QoS provision of cloud service, a robust predictive routing framework (ROPE) is proposed with three major components: 1) an early warning scheme detects V2I link deterioration in advance via predicting vehicle mobility and link signal strength to facilitate seamless path switchover; 2) a virtual routing mechanism finds top3 paths that have the highest path strength and satisfy the connectivity and hop count constraints based on the prediction results to fulfill QoS requirements of cloud service; 3) a path verification protocol checks availability and quality of the top3 paths shortly before switchover and activates one qualified path for switchover to ensure routing robustness. We implement ROPE in a simulation framework incorporating real-world urban maps, microscopic traffic generation, geometry-based channel modeling, and offline data analysis as well as online inference. Extensive simulations demonstrate the superiority of ROPE over direct V2I communications and a connectivity-based predictive routing protocol under various scenarios.

cs.NI↗

arXiv2025

HRGR: Enhancing Image Manipulation Detection via Hierarchical Region-aware Graph Reasoning

Image manipulation detection is to identify the authenticity of each pixel in images. One typical approach to uncover manipulation traces is to model image correlations. The previous methods commonly adopt the grids, which are fixed-size squares, as graph nodes to model correlations. However, these grids, being independent of image content, struggle to retain local content coherence, resulting in imprecise detection.To address this issue, we describe a new method named Hierarchical Region-aware Graph Reasoning (HRGR) to enhance image manipulation detection. Unlike existing grid-based methods, we model image correlations based on content-coherence feature regions with irregular shapes, generated by a novel Differentiable Feature Partition strategy. Then we construct a Hierarchical Region-aware Graph based on these regions within and across different feature layers. Subsequently, we describe a structural-agnostic graph reasoning strategy tailored for our graph to enhance the representation of nodes. Our method is fully differentiable and can seamlessly integrate into mainstream networks in an end-to-end manner, without requiring additional supervision. Extensive experiments demonstrate the effectiveness of our method in image manipulation detection, exhibiting its great potential as a plug-and-play component for existing architectures. Codes and models are available at https://github.com/OUC-VAS/HRGR-IMD.

cs.CV↗

arXiv2025

Interference Graph Estimation for Resource Allocation in Multi-Cell Multi-Numerology Networks: A Power-Domain Approach

The interference graph, depicting the intra- and inter-cell interference channel gains, is indispensable for resource allocation in multi-cell networks.However, there lacks viable methods of interference graph estimation (IGE) for multi-cell multi-numerology (MN) networks. To fill this gap, we propose an efficient power-domain approach to IGE for the resource allocation in multi-cell MN networks. Unlike traditional reference signal-based approaches that consume frequency-time resources, our approach uses power as a new dimension for the estimation of channel gains. By carefully controlling the transmit powers of base stations, our approach is capable of estimating both intra- and inter-cell interference channel gains. As a power-domain approach, it can be seamlessly integrated with the resource allocation such that IGE and resource allocation can be conducted simultaneously using the same frequency-time resources. We derive the necessary conditions for the power-domain IGE and design a practical power control scheme. We formulate a multi-objective joint optimization problem of IGE and resource allocation, propose iterative solutions with proven convergence, and analyze the computational complexity. Our simulation results show that power-domain IGE can accurately estimate strong interference channel gains with low power overhead and is robust to carrier frequency and timing offsets.

cs.NI↗

arXiv2025

Wireless Hallucination in Generative AI-enabled Communications: Concepts, Issues, and Solutions

Generative AI (GenAI) is driving the intelligence of wireless communications. Due to data limitations, random generation, and dynamic environments, GenAI may generate channel information or optimization strategies that violate physical laws or deviate from actual real-world requirements. We refer to this phenomenon as wireless hallucination, which results in invalid channel information, spectrum wastage, and low communication reliability but remains underexplored. To address this gap, this article provides a comprehensive concept of wireless hallucinations in GenAI-driven communications, focusing on hallucination mitigation. Specifically, we first introduce the fundamental, analyze its causes based on the GenAI workflow, and propose mitigation solutions at the data, model, and post-generation levels. Then, we systematically examines representative hallucination scenarios in GenAI-enabled communications and their corresponding solutions. Finally, we propose a novel integrated mitigation solution for GenAI-based channel estimation. At the data level, we establish a channel estimation hallucination dataset and employ generative adversarial networks (GANs)-based data augmentation. Additionally, we incorporate attention mechanisms and large language models (LLMs) to enhance both training and inference performance. Experimental results demonstrate that the proposed hybrid solutions reduce the normalized mean square error (NMSE) by 0.19, effectively reducing wireless hallucinations.

cs.IT↗

arXiv2025

Progress of the TianQin project

TianQin is a future space-based gravitational wave observatory targeting the frequency window of $10^{-4}$ Hz $\sim 1$ Hz. A large variety of gravitational wave sources are expected in this frequency band, including the merger of massive black hole binaries, the inspiral of extreme/intermediate mass ratio systems, stellar-mass black hole binaries, Galactic compact binaries, and so on. TianQin will consist of three Earth orbiting satellites on nearly identical orbits with orbital radii of about $10^5$ km. The satellites will form a normal triangle constellation whose plane is nearly perpendicular to the ecliptic plane. The TianQin project has been progressing smoothly following the ``0123" technology roadmap. In step ``0", the TianQin laser ranging station has been constructed and it has successfully ranged to all the five retro-reflectors on the Moon. In step ``1", the drag-free control technology has been tested and demonstrated using the TianQin-1 satellite. In step ``2", the inter-satellite laser interferometry technology will be tested using the pair of TianQin-2 satellites. The TianQin-2 mission has been officially approved and the satellites will be launched around 2026. In step ``3", i.e., the TianQin-3 mission, three identical satellites will be launched around 2035 to form the space-based gravitational wave detector, TianQin, and to start gravitational wave detection in space.

gr-qc↗

arXiv2025

Solving Energy-Independent Density for CT Metal Artifact Reduction via Neural Representation

X-ray CT often suffers from shadowing and streaking artifacts in the presence of metallic materials, which severely degrade imaging quality. Physically, the linear attenuation coefficients (LACs) of metals vary significantly with X-ray energy, causing a nonlinear beam hardening effect (BHE) in CT measurements. Reconstructing CT images from metal-corrupted measurements consequently becomes a challenging nonlinear inverse problem. Existing state-of-the-art (SOTA) metal artifact reduction (MAR) algorithms rely on supervised learning with numerous paired CT samples. While promising, these supervised methods often assume that the unknown LACs are energy-independent, ignoring the energy-induced BHE, which results in limited generalization. Moreover, the requirement for large datasets also limits their applications in real-world scenarios. In this work, we propose Density neural representation (Diner), a novel unsupervised MAR method. Our key innovation lies in formulating MAR as an energy-independent density reconstruction problem that strictly adheres to the photon-tissue absorption physical model. This model is inherently nonlinear and complex, making it a rarely considered approach in inverse imaging problems. By introducing the water-equivalent tissues approximation and a new polychromatic model to characterize the nonlinear CT acquisition process, we directly learn the neural representation of the density map from raw measurements without using external training data. This energy-independent density reconstruction framework fundamentally resolves the nonlinear BHE, enabling superior MAR performance across a wide range of scanning scenarios. Extensive experiments on both simulated and real-world datasets demonstrate the superiority of our unsupervised Diner over popular supervised methods in terms of MAR performance and robustness.

cs.CV↗

arXiv2024

The Gaussian-Minkowski problem for $C$-pseudo-cones

The Gaussian surface area measures for $C$-pseudo-cones are studied in this paper. Using the variational arguments and the approximation methods of Schneider, we obtain the existence of solutions to the Gaussian-Minkowski problem for $C$-pseudo-cones with small co-volume.

math.FA↗

arXiv2024

Sublayers Editing of Covalent MAX Phase for Nanolaminated Early Transition Metal Compounds

Two-dimensional transition metal carbides and nitrides (MXenes) have gained popularity in fields such as energy storage, catalysis, and electromagnetic interference due to their diverse elemental compositions and variable surface terminations (T). Generally, the synthesis of MXene materials involves etching the weak M-A metallic bonds in the ternary layered transition metal carbides and nitrides (MAX phase) using HF acid or Lewis acid molten salts, while the strong M-X covalent bonds preserve the two-dimensional framework structure of MXenes. On the other hand, the MAX phase material family also includes a significant class of members where the A site is occupied by non-metal main group elements (such as sulfur and phosphorus), in which both M-A and M-X are covalent bond-type sublayers. The aforementioned etching methods cannot be used to synthesize MXene materials from these parent phases. In this work, we discovered that the covalent bond-type M-A and M-X sublayers exhibit different reactivity with some inorganic materials in a high-temperature molten state. By utilizing this difference in reactivity, we can structurally modify these covalent sublayers, allowing for the substitution of elements at the X site (from B to Se, S, P, C) and converting non-metal A site atoms in non-van der Waals (non-vdW) MAX phases into surface atoms in vdW layered materials. This results in a family of early transition metal Xide chalcogenides (TMXCs) that exhibit lattice characteristics of both MXenes and transition metal chalcogenides. Using electron-donor chemical scissors, these TMXC layered materials can be further exfoliated into monolayer nanosheets. The atomic configurations of each atom in these monolayer TMXCs are the same as those of conventional MXenes, but the oxidation states of the M-site atoms can be regulated by both X-site atoms and intercalated cations.

cond-mat.mtrl-sci↗

arXiv2024

Loss-driven miniaturized bound state in continuum biosensing system

Optical metasurface has brought a revolution in label-free molecular sensing, attracting extensive attention. Currently, such sensing approaches are being designed to respond to peak wavelengths with a higher Q factor in the visible and near-infrared regions.Nevertheless, a higher Q factor that enhances light confinement will inevitably deteriorate the wavelength sensitivity and complicate the sensing system. We propose a Q-switched sensing mechanism, which enables the real part of the refractive index to effectively perturbate the damping loss of the oscillator, resulting in a boost of peak intensity.Consequently, a higher Q factor in Q-switched sensor can further enhance the peak sensitivity while remaining compatible with broadband light sources, simultaneously meeting the requirements of high performance and a compact system.This is achieved in a unique 3D bound-state-in-continuum (BIC) metasurface which can be mass-produced by wafer-scale aluminum-nanoimprinting technology and provides a peak intensity sensitivity up to 928 %/RIU.Therefore, a miniaturized BIC biosensing system is realized, with a limit of detection to 10E-5 refractive index units and 129 aM extracellular vesicles in clinical lung cancer diagnosis, both of which are magnitudes lower than those of current state-of-the-art biosensors. It further demonstrates significant potential for home cancer self-testing equipment for post-operative follow-up. This Q-switched sensing mechanism offers a new perspective for the commercialization of advanced and practical BIC optical biosensing systems in real-setting scenarios.

physics.optics↗