arXiv subjects

Xiaoyang Sun

Publications and source records attributed to Xiaoyang Sun.

10 recordsLinked to original sources

arXiv2026

DeepShare: Assurance-Driven Deep Learning Job Scheduling for Multi-Tenant Clusters

Multi-tenant GPU clusters frequently remain underutilized even when tenants experience long queueing delays, because quota control, queue ordering, preemption, and GPU sharing are driven by different local signals. We present DeepShare, a scheduler that uses a continuous tenant-assurance signal to coordinate these decisions at runtime. DeepShare combines elastic quota borrowing, tenant-specific runtime prediction, cost-aware best-effort preemption, and interference-aware MPS colocation, while using the same assurance signal to decide when borrowed capacity should be reclaimed and when sharing should become more conservative. In trace-driven experiments on 23,859 Venus jobs and 3,200 internal jobs, DeepShare achieves an average GPU utilization of 70.58%, a 29.5% improvement over the strongest non-intrusive sharing baseline, while reducing average queueing delay by 46%. On a 16-GPU Kubernetes testbed, it reduces the average job completion time by 34% and maintains 93% QoS compliance for guaranteed tenants. These results show that treating tenant assurance as a runtime control loop achieves a more advantageous utilization-QoS trade-off than optimizing quotas, scheduling, and resource sharing independently.

cs.DC↗

arXiv2026

Latency-Aware Orchestration for Multi-Agent LLM Workflows on Heterogeneous GPUs

Concurrent multi-agent workflows expose future dependencies and serving-state requirements while running on heterogeneous GPU pools with time-varying load, model residency, and resource availability. The logical workflow defines the required computation, whereas its physical scheduling units, model-lifecycle actions, resource ordering, and placement must be selected according to the observed pool state. We present a prediction-guided runtime that uses workflow forecasts to construct and optimize a physical execution graph. Predictor estimates device-specific activation latency, peak memory, and model-loading cost, then propagates these predictions through workflow dependencies to forecast activation readiness and future model demand. Constructor builds semantics-preserving fusion and model-lifecycle alternatives, while Scheduler jointly optimizes their selection, placement, and execution order based on the live pool state. Across a workload spanning three workflow scenarios on a heterogeneous GPU pool, our system reduces end-to-end makespan and overall p95 completion latency under burst arrivals by up to 36.8% and 25.9%, respectively, over state-of-the-art workflow schedulers. It also saves up to 24.63 GPU-s per completed session.

cs.DC↗

arXiv2026

ElastiCo: Elastic Configuration and Interference-Aware Orchestration for GPU Clusters

Modern GPU clusters must simultaneously serve deep learning training and offline large language model inference workloads, yet existing schedulers treat these as isolated resource consumers with rigid, static allocations. This leaves substantial GPU capacity underutilized: training jobs reserve entire devices despite periodic idle phases, while offline inference tasks over-provision GPUs despite bursty demand patterns. We present ElastiCo, an elastic co-location framework that enables training and inference workloads to safely share GPUs through three integrated mechanisms. First, Resource Shape Transformation exposes each job as a family of feasible resource-performance configurations. Second, Elastic Shadow Pricing decomposes the resulting multi-resource allocation problem into per-job configuration selection subproblems via dynamic per-resource shadow prices. Third, Interference-Aware Co-location uses a predictor trained on hardware-counter and task-level features to estimate pairwise performance degradation under GPU sharing. Implemented as native Kubernetes middleware requiring no user-code modifications, ElastiCo is evaluated on a 64-GPU testbed and through large-scale trace-driven simulations (up to 512 GPUs), reducing the average JCT by up to 2.94x, increasing the cluster throughput by 2.02x, and increasing the GPU utilization from approximately 25% to 46%.

cs.DC↗

arXiv2026

SpecBox: Speculative Sandbox Scheduling for Efficient LLM Agent Serving

As LLM agents increasingly rely on the Model Context Protocol (MCP) to invoke isolated external sandboxes, disaggregated sandbox deployment introduces a fundamental tension between resource utilization and interactive tail latency. Persistent long-lived sandbox reservations incur excessive memory overhead at scale, while lazy on-demand instantiation generates severe cold-start penalties that degrade response performance under multi-tenant, multi-turn agent workloads. To resolve this dilemma, we present SpecBox, a runtime built around speculative sandbox preallocation tailored for dynamic LLM agent execution pipelines. At its core, SpecBox implements keyword matching and streaming semantic embedding to enable intent-driven sandbox prewarming, which identifies pending tool execution demands mid-LLM token generation and fully overlaps sandbox bootstrapping with model inference. To extend prewarming windows across sequential agent steps, the framework leverages context-aware stochastic prefetching atop a sandbox dependency graph to probabilistically forecast future sandbox switches ahead of execution. We complement these speculative mechanisms with two orthogonal optimizations: a semantic result cache that prunes redundant repeated sandbox invocations, and a dedicated out-of-band shared-memory transport plane that bypasses conventional network serialization to deliver zero-copy artifact transfers. Evaluated on high-concurrency multi-turn agent traces, our prototype demonstrates that SpecBox cuts P99 end-to-end latency by up to $2.9\times$ relative to the on-demand sandbox baseline, while slashing peak memory consumption by $45.9\%$ compared to permanently reserved sandbox deployments.

cs.DC↗

arXiv2026

Maestro: Workload-Aware Cross-Cluster Scheduling for LLM-Based Multi-Agent Systems

Large Language Model based Multi-Agent Systems (LLM-MAS) have emerged as a powerful paradigm for tackling complex tasks by breaking them into collaborative workflows of specialized LLM-powered agents. However, deploying such multi-agent workloads at scale poses significant system challenges. Each user query spawns an iterative pipeline of LLM calls, greatly amplifying resource consumption compared to single-turn queries. In resource-constrained cloud settings, these workflows face non-deterministic and input-dependent costs at decode stage, heavy-tailed multi-model requirements with memory fragmentation and over-provisioning, and cross-cluster scheduling trade-offs. We present Maestro, a workload-aware scheduling system designed for LLM-MAS serving under strict GPU budgets. Maestro explicitly leverages agent semantics and roles: it predicts the output length and memory usage of each stage and uses this prediction to drive a hierarchical scheduler. At the node level, Maestro enables dynamic multi-model co-location via hierarchical weight caching and elastic memory provisioning. At the cluster level, it performs latency-aware routing to avoid cold-start delays and memory overloads. At the global level, it enforces workflow-aware prioritization to minimize head-of-line blocking for interactive tasks. Across prototype experiments and trace-driven simulations, Maestro reduces KV-reservation HBM by 67.2% and improves high-contention SLO attainment over EDF by 23.6 percentage points.

cs.DC↗

arXiv2022

Affinity-Aware Resource Provisioning for Long-Running Applications in Shared Clusters

Resource provisioning plays a pivotal role in determining the right amount of infrastructure resource to run applications and target the global decarbonization goal. A significant portion of production clusters is now dedicated to long-running applications (LRAs), which are typically in the form of microservices and executed in the order of hours or even months. It is therefore practically important to plan ahead the placement of LRAs in a shared cluster so that the number of compute nodes required by them can be minimized to reduce carbon footprint and lower operational costs. Existing works on LRA scheduling are often application-agnostic, without particularly addressing the constraining requirements imposed by LRAs, such as co-location affinity constraints and time-varying resource requirements. In this paper, we present an affinity-aware resource provisioning approach for deploying large-scale LRAs in a shared cluster subject to multiple constraints, with the objective of minimizing the number of compute nodes in use. We investigate a broad range of solution algorithms which fall into three main categories: Application-Centric, Node-Centric, and Multi-Node approaches, and tune them for typical large-scale real-world scenarios. Experimental studies driven by the Alibaba Tianchi dataset show that our algorithms can achieve competitive scheduling effectiveness and running time, as compared with the heuristics used by the latest work including Medea and LraSched.

cs.DC↗

arXiv2021

Automated Conformance Testing for JavaScript Engines via Deep Compiler Fuzzing

JavaScript (JS) is a popular, platform-independent programming language. To ensure the interoperability of JS programs across different platforms, the implementation of a JS engine should conform to the ECMAScript standard. However, doing so is challenging as there are many subtle definitions of API behaviors, and the definitions keep evolving. We present COMFORT, a new compiler fuzzing framework for detecting JS engine bugs and behaviors that deviate from the ECMAScript standard. COMFORT leverages the recent advance in deep learning-based language models to automatically generate JS test code. As a departure from prior fuzzers, COMFORT utilizes the well-structured ECMAScript specifications to automatically generate test data along with the test programs to expose bugs that could be overlooked by the developers or manually written test cases. COMFORT then applies differential testing methodologies on the generated test cases to expose standard conformance bugs. We apply COMFORT to ten mainstream JS engines. In 200 hours of automated concurrent testing runs, we discover bugs in all tested JS engines. We had identified 158 unique JS engine bugs, of which 129 have been verified, and 115 have already been fixed by the developers. Furthermore, 21 of the Comfort-generated test cases have been added to Test262, the official ECMAScript conformance test suite.

cs.SE↗

arXiv2020

Measurement of the neutron beam profile of the Back-n white neutron facility at CSNS with a Micromegas detector

The Back-n white neutron beam line, which uses back-streaming white neutrons from the spallation target of the China Spallation Neutron Source, is used for nuclear data measurements. A Micromegas-based neutron detector with two variants was specially developed to measure the beam spot distribution for this beam line. In this article, the design, fabrication, and characterization of the detector are described. The results of the detector performance tests are presented, which include the relative electron transparency, the gain and the gain uniformity, and the neutron beam profile reconstruction capability. The result of the first measurement of the Back-n neutron beam spot distribution is also presented.

physics.ins-det↗

arXiv2019

Measurements of differential and angle-integrated cross sections for the $^{10}$B($n, α$)$^{7}$Li reaction in the neutron energy range from 1.0 eV to 2.5 MeV

Differential and angle-integrated cross sections for the $^{10}$B($n, α$)$^{7}$Li, $^{10}$B($n, α$$_{0}$)$^{7}$Li and $^{10}$B($n, α$$_{1}$)$^{7}$Li$^{*}$ reactions have been measured at CSNS Back-n white neutron source. Two enriched (90%) $^{10}$B samples 5.0 cm in diameter and ~85.0 $μ$g/cm$^{2}$ in thickness each with an aluminum backing were prepared, and back-to-back mounted at the sample holder. The charged particles were detected using the silicon-detector array of the Light-charged Particle Detector Array (LPDA) system. The neutron energy E$_{n}$ was determined by TOF (time-of-flight) method, and the valid $α$ events were extracted from the E$_{n}$-Amplitude two-dimensional spectrum. With 15 silicon detectors, the differential cross sections of $α$-particles were measured from 19.2° to 160.8°. Fitted with the Legendre polynomial series, the ($n, α$) cross sections were obtained through integration. The absolute cross sections were normalized using the standard cross sections of the $^{10}$B($n, α$)$^{7}$Li reaction in the 0.3 - 0.5 MeV neutron energy region. The measurement neutron energy range for the $^{10}$B($n, α$)$^{7}$Li reaction is 1.0 eV $\le$ En < 2.5 MeV (67 energy points), and for the $^{10}$B($n, α$$_{0}$)$^{7}$Li and $^{10}$B($n, α$$_{1}$)$^{7}$Li$^{*}$ reactions is 1.0 eV $\le$ En < 1.0 MeV (59 energy points). The present results have been analyzed by the resonance reaction mechanism and the level structure of the $^{11}$B compound system, and compared with existing measurements and evaluations.

nucl-ex↗

arXiv2018

Survey and Test Environment for ITER EPP#12 Electrical Components

The purpose of Equatorial Port Plug 12 (EPP#12) for International thermonuclear experimental reactor (ITER) is to provide a common platform and interface, support or constrainer for five diagnostic plant systems and one glow discharging cleaning system (GDC). As EPP#12 integrator, a team from Institute of plasma physics Chinese of Sciences (CASIPP) performs the design work. The Instrument and Control(I&C) is an important part of system design. The main I&C functions will be implemented include temperature measurements of the port structures, electrical heater with temperature control during baking of windows and providing spare input measurement channel. The integrator should provide the embedded temperature sensors, associated cabling, electrical connectors and electrical feedthrough. Most electrical components will be deployed in port plug structure which is a harsh environment for electrical components. In this paper, we present the survey and research of electrical components for ITER EPP#12. And the design and implement of a test environment for electrical components which is based-on ITER CODAC is also described.

physics.ins-det↗