arXiv subjects

Xiaolin Wang

Publications and source records attributed to Xiaolin Wang.

At least 109 records · Page 6Linked to original sources

arXiv2017

Photo-induced change of refractive index and transparency in Bi2Te3 films

We report on an 800 nm femtosecond laser beam induced giant refractive index modulation and enhancement of near-infrared transparency in topological insulator material Bi2Te3 thin films. An ultrahigh refractive index of up to 5.9 was observed in the Bi2Te3 thin film in near-infrared frequency. The refractive index dramatically decreases by a factor of ~ 3 by an exposure to the 800 nm femtosecond laser beam. Simultaneously, the transmittance of the Bi2Te3 thin films markedly increases to ~ 96% in the near-infrared frequency. The Raman spectra provides strong evidences that the observed both refractive index modulation and transparency enhancement result from laser beam induced photooxidation effects in the Bi2Te3 thin films. The Bi2Te3 compound transfers into Bi2O3 and TeO2 under the laser beam illumination. These experimental results pave the way towards the design of various optical devices, such as near-infrared flat lenses, waveguide and holograms, based on topological insulator materials.

cond-mat.mtrl-sci↗

arXiv2017

Realization of Flat Band with Possible Nontrivial Topology in Electronic Kagome Lattice

The energy dispersion of fermions or bosons vanishes in momentum space if destructive quantum interference occurs in a frustrated Kagome lattice with only nearest-neighbour (NN) hopping. A discrete flat band (FB) without any dispersion is consequently formed, promising emergence of fractional quantum Hall states (FQHS) at high temperatures. Here, we report experimental realization of a FB with possible nontrivial topology in an electronic Kagome lattice on a twisted multilayer silicene. The electrons are localized in the Kagome lattice due to quantum destructive interference, and thus, their kinetic energy is quenched, which gives rise to a FB peak in density of states. A robust and pronounced one-dimensional edge state has been revealed at Kagome edge, which resides at higher energy than the FB. Our observations of the FB and the exotic edge state in electronic Kagome lattice open up the possibility towards the realization of fractional Chern insulators in two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2017

Dynamics and locomotion of flexible foils in a frictional environment

Over the past few decades, oscillating flexible foils have been used to study the physics of organismal propulsion in different fluid environments. Here we extend this work to a study of flexible foils in a frictional environment. When the foil is oscillated by heaving at one end but not allowed to locomote freely, the dynamics change from periodic to non-periodic and chaotic as the heaving amplitude is increased or the bending rigidity is decreased. For friction coefficients lying in a certain range, the transition passes through a sequence of $N$-periodic and asymmetric states before reaching chaotic dynamics. Resonant peaks are damped and shifted by friction and large heaving amplitudes, leading to bistable states. When the foil is allowed to locomote freely, the horizontal motion smoothes the resonant behaviors. For moderate frictional coefficients, steady but slow locomotion is obtained. For large transverse friction and small tangential friction corresponding to wheeled snake robots, faster locomotion is obtained. Traveling wave motions arise spontaneously, and and move with horizontal speed that scales as transverse friction to the 1/4 power and input power that scales as transverse friction to the 5/12 power. These scalings are consistent with a boundary layer form of the solutions near the foil's leading edge.

physics.bio-ph↗

arXiv2017

Transition from insulator to superconductor and significant enhancement of superconductivity in FeSe films via tuning Fe-vacancy disorders

In contrast to its bulk crystals, the FeSe film or layer exhibits better superconductivity performance, which attract much interest in its fundamental research as well as potential application. In present work, transition from insulator to superconductor and significant enhancement of superconductivity were achieved in the high quality (00l) oriented FeSe films via controlling the thickness as well as the Fe/Se ratio. The highest Tc up to 15.2 K (almost 2 times higher than those of bulk crystals) and Hc2 up to 35.5 T are obtained in our atmosphere-stable FeSe thin film with practical thickness (240 nm), implying their great potential application in the electronic devices at high magnetic fields. More importantly, it was found that the Fe-vacancy disorder in FeSe films is the intrinsic factor determining the evolution of the superconductivity, rather than thickness effect. In our non-superconducting FeSe film with Fe/Se ratio of 1.00:1.09, insulating \b{eta}-Fe1-xSe phase with iron-vacancy disorders is the main phase and more likely to be the parent phase of FeSe superconducting system. Tuning the Fe-vacancy disorders via changing the Fe/Se ratio can dramatically vary the concentration of charge carrier and introduce proper electron doping, which finally leads to the transition from insulator to superconductor and further enhancement in the superconductivity. Intriguingly, our results also indicate that when the Fe/Se ratio of film is beyond a critical value, superconducting FeSe films will become instable, and phase separation occurs with new non-superconducting phase precipitating in the superconducting matrix, causing the degradation in the superconductivity. The results in present work help us to well understand the intrinsic mechanism of superconductivity among Fe-Se superconducting system and provide a new strategy to further pursue higher Tc in these materials.

cond-mat.supr-con↗

arXiv2016

Study on the power scaling and mode instability property in an all-fiber narrow-linewidth tapered fiber amplifier

We develop a high-power narrow-linewidth fiber amplifier based on a tapered Yb-doped fiber. In the experiment, the narrow end of the tapered fiber is used as the input port of both pump source and signal light to form a robust all-fiber configuration. The stimulated Brillouin scattering (SBS) is effectively suppressed owing to its gradually increased mode area as well as continuously changed Brillouin frequency shift dependent on the core diameter. As a result, an output power of 260 W without SBS and mode instability (MI) is obtained, with a slope efficiency of 71.3 % and a narrow linewidth of ~2GHz. However, the MI rather than SBS is observed when output power reaches 260 W. The features of MI are experimentally studied in detail. It is pointed out that, the MI seems the primary and durative limitation factor of the tapered fiber amplifier for high-power narrow-linewidth output, although it has advantage to reduce other nonlinear effect. To the best of our knowledge, this is the first detailed experimental study on MI in a tapered fiber. At last, some worthwhile discussion about the optimization of the tapered fiber and the whole system for both SBS and MI suppression is conducted based on the present and previous results.

physics.optics↗

arXiv2016

Thermoelectric signals of state transition in polycrystalline SmB6

Topological Kondo insulator SmB6 has attracted quite a lot of attentions from condensed matter physics community. A number of unique electronic properties, including low- temperature resistivity anomaly, 1D electronic transport and 2D Fermi surfaces have been observed in SmB6. Here, we report on thermoelectric transport properties of polycrystalline SmB6 over a broad temperature from 300 K to 2 K. An anomalous transition in the temperature-dependent Seebeck coefficient S from S(T) ~ T-1 to S(T) ~ T was observed around 12 K. Such a transition demonstrates a transition of conductivity from 3D metallic bulk states to 2D metallic surface states with insulating bulk states. Our results suggest that the thermotransport measurements could be used for the characterization of state transition in topological insulators.

cond-mat.mtrl-sci↗

arXiv2016

Study of nonleptonic $B_{q}^{\ast}$ ${\to}$ $D_{q}V$ and $P_{q} D^*$ weak decays

Motivated by the powerful capability of measurement for the $b$-flavored hadron rare decays at LHC and SuperKEKB/Belle-II, the nonleptonic $\bar{B}^{\ast}$ ${\to}$ $D\bar{D}^{\ast}$, $D{ρ^-}$, $DK^{\ast-}$, $πD^{\ast}$ and $KD^{\ast}$ weak decays are studied in detail. With the amplitudes calculated with factorization approach and the form factors of $B^{\ast}$ transition into pseudoscalar meson evaluated with the BSW model, branching fractions and polarization fractions are firstly presented. Numerically, the CKM-favored $\bar{B}_{q}^{\ast}$ ${\to}$ $D_{q}D_{s}^{{\ast}-}$ and $D_{q}ρ^{-}$ decays have large branching fractions, $\sim$ $10^{-8}$, which should be sought for with priority and firstly observed by LHC and Belle-II experiments. The $\bar{B}^{\ast}_q$ ${\to}$ $D_qK^{\ast}$ and $D_qρ$ decays are dominated by the longitudinal polarization states. While, the parallel polarization fractions of $\bar{B}^{\ast}_q$ ${\to}$ $D_q\bar{D}^{\ast}$ decays are comparable with the longitudinal ones, numerically, $f_{\parallel}$ $+$ $f_{L}$ ${\simeq}$ 95\% and $f_{L}:f_{\parallel}$ $\simeq$ $5:4$. Some comparisons between $\bar{B}^{*0}_q$ $\to$ $D_q V$ and their corresponding $\bar{B}^{0}_q$ $\to$ $D^*_q V$ decays are performed, and the relation $ f_{L,\parallel}(\bar{B}^{\ast 0}\to D V)\simeq f_{L,\parallel}(\bar{B}^0\to D^{\ast +} V^-) $ is presented. Besides, with the implication of $SU(3)$ flavor symmetry, some useful ratios $ R_{\rm du}$ and $ R_{\rm ds}$ are discussed in detail, and suggested to be verified experimentally.

hep-ph↗

arXiv2016

Influence of seed power on mode instabilities in high power fiber amplifiers

We use a semi-analytical model of stimulated thermal Rayleigh scattering to present theoretical study of seed power on mode instability with the presence of photodarkening. The behavior of mode instabilities as a function of seed power has been investigated. The nonlinear dependence of the threshold with lower seed powers is ascribed to the influence of gain saturation while the reduction behavior of the threshold with higher seed powers is put down to the effects of photodarkening, which agrees well with the experimental results.

physics.optics↗

arXiv2015

Quantum digital signature scheme

Digital signatures are the building blocks of modern communication to prevent masquerading by any party other than recipients, repudiation by signatory and forgery by any individual recipient. Digital signature scheme is said to be standard if the signature (a) is a pattern depending upon the message to be signed, (b) is built upon some information publically known and unique to the signatory, (c) can be stored by all the recipients. While classical methods provide computational security only, quantum mechanics guarantees information-theoretically secure and standard digital signature schemes. However, standard quantum digital signature schemes are based on quantum one-way functions and hence require long term quantum memory for storing quantum signatures, which is not practically feasible yet. We demonstrate here a standard quantum digital signature scheme by replacing quantum one-way functions with multiparty controlled EPR channels. It allows signatory to generate non-locally correlated quantum signatures, instead of multiple copies of a unique quantum state, and assures security against any individual since others have non-locally correlated information.

quant-ph↗

arXiv2015

Mg coating induced superconductivity in the FeSe ultrathin film

The transition from insulator to superconductor was achieved in the non-superconducting FeSe ultrathin film via simple Mg coating technique in present work. It was found that in non-superconducting FeSe ultrathin film without Mg coating, insulating \b{eta}-Fe1-xSe phase with iron-vacancy disorders is the main phase and more likely to be the parent phase of FeSe superconducting system. Proper Mg coating on the surface of FeSe films can lead to Mg entering FeSe crystal lattice to fill up these Fe vacancies rather than replace Fe. Simultaneously, additional electron doping is introduced and the electron carrier concentration in this parent phase can be tuned, which is responsible for the SIT and evolution of superconductivity in this system. However, abnormal decrease of electron concentration was found in FeSe film with excessive Mg coating, which brings about the severe degradation in superconducting performance.

cond-mat.supr-con↗

arXiv2015

Study of dopant concentrations on thermal induced mode instability in high power fiber amplifiers

Dependence of mode instabilities (MI) on ytterbium dopant concentrations in high power fiber amplifiers has been investigated. It is theoretically shown that, by only varying the fiber length to maintain the same total small-signal pump absorption, the MI threshold is independent of dopant concentration. MI thresholds of gain fibers with ytterbium dopant concentration of 5.93X10^25/m3 and 1.02X10^26/m3 have been measured, which exhibit similar thresholds and agree with theoretical results. The result indicates that heavy doping of active fiber can be adopted to suppress nonlinear effects without decreasing MI threshold, which provides a method of maximizing the power output of fiber laser, taking into account the stimulated Brillouin scattering, stimulated Raman Scattering, and MI thresholds simultaneously.

physics.optics↗

arXiv2015

Theoretical study of transport properties of B40 and its endohedral borospherenes in single-molecule junctions

C60 fullerene has been studied extensively, as it is considered to be a good candidate for building single-molecule junctions. Here, we theoretically demonstrate that the conductance of single-molecule junctions based on a newly discovered molecule, borospherene (B40), is comparable to that for the C60-based junction with its more delocalized π electrons. The charge injection efficiency in the B40-based junction is improved, as up to 7 atoms in direct contact with the electrode are possible in the Au-B40-Au junction. Interestingly, a higher number of atoms in direct contact with the electrode does not result in a higher number of conduction channels because of the unique chemical bonding in the B40 molecule, without two-center two- electron bonds. The transport properties of Au-B40-Au junctions can be proved by doping. With a Ca, Sr, or Y atom encapsulated into the B40 cage, the conductance at zero bias increases significantly. Moreover, our calculations show that the lowest unoccupied molecular orbital dominates the low-bias transport, as the thermopower in these junctions is negative. Our study indicates that B40 is an attractive new platform for designing highly conductive single-molecule junctions for future molecular circuits.

cond-mat.mes-hall↗

arXiv2015

Strong enhancement of critical current density in both low & high fields and flux pinning mechanism under hydrostatic pressure in optimally doped (Ba,K)Fe2As2 single crystals

Strong pinning depends on the pinning force strength and number density of effective defects. Using hydrostatic pressure method, we demonstrate that hydrostatic pressure up to 1.2 GPa can significantly enhance flux pinning or Jc by a factor of up to 5 especially in both low and high fields in optimally doped Ba0.6K0.4Fe2As2 crystals. Our analysis on the flux pining mechanism indicate that both pinning centre number density (Np) and pinning force (Fp) are greatly increased by the pressure and contribute to strong pinning.

cond-mat.supr-con↗

arXiv2015

Stability and scalability of piezoelectric flags

We investigate the effect of piezoelectric (PZT) material on the flutter speed, vibration mode and frequency, and energy harvesting power and efficiency of a flexible flag in various fluids. We develop a fully coupled fluid-solid-electric model by combining the inviscid vortex sheet model with a linear electro-mechanical coupling model. A resistance only circuit and a resonant resistance-inductance (RL) circuit are considered. For a purely resistive circuit, an increased electro-mechanical coupling factor results in an increased flutter speed, vibration frequency, averaged electric power and efficiency. A consistent optimal resistance is found that maximizes the flutter speed and the energy harvesting power. For a resonant RL circuit, by tuning the inductance to match the circuit frequency to the flag's vibration frequency, the flutter speed can be greatly decreased, and a larger averaged power and efficiency are obtained. We also consider a model scale set-up with several commonly used commercial materials for operating in air and water. Typical ranges of dimensionless parameters are obtained for four types of material that span a wide range of solid density and rigidity values. We find that the resistance only circuit is more effective when the flag is placed in a lighter fluid (e.g. air), while the RL circuit is able to reduce the flutter speed when the flag is placed in a heavier fluid (e.g. water).

physics.flu-dyn↗

arXiv2015

Crossover of Magnetoresistance from Fourfold to Twofold Symmetry in SmB6 Single Crystal, a topological Kondo insulator

Topological Kondo insulators have been attracting great attention from the condensed-matter physics community due to their fascinating topological and strongly correlated properties. Here, we report angle-dependent c-axis magnetoresistance (MR) oscillations in a Kondo insulator, SmB6 single crystal, in a magnetic field of up to 13 T rotated in the ab-plane. Four-fold symmetric MR oscillations are first observed above 8 K, which result from the four-fold (C4) degeneracy of the bulk Fermi surface of SmB6. With decreasing temperature down to 2.3 K, the C4 symmetry of the MR oscillations gradually weakens and C2 symmetry appears. This demonstrates a crossover from three-dimensional bulk states to two-dimensional surface states and implies the possible emergence of topological nematic states. Our experimental observations shed new light on the metallic surface states and nematic states in the Kondo insulator SmB6.

cond-mat.str-el↗

arXiv2015

Observation of van Hove Singularities in Twisted Silicene Multilayers

Interlayer interactions perturb the electronic structure of two-dimensional materials and lead to new physical phenomena, such as van Hove singularities and Hofstadter's butterfly pattern. Silicene, the recently discovered two-dimensional form of silicon, is quite unique, in that silicon atoms adopt competing sp 2 and sp 3 hybridization states leading to a low-buckled structure promising relatively strong interlayer interaction. In multilayer silicene, the stacking order provides an important yet rarely explored degree of freedom for tuning its electronic structures through manipulating interlayer coupling. Here, we report the emergence of van Hove singularities in the multilayer silicene created by an interlayer rotation. We demonstrate that even a large-angle rotation (> 20 o ) between stacked silicene layers can generate a Moire pattern and van Hove singularities due to the strong interlayer coupling in multilayer silicene. Our study suggests an intriguing method for expanding the tunability of the electronic structure for electronic applications in this two-dimensional material.

cond-mat.mtrl-sci↗

arXiv2015

Study of wavelength dependence of mode instability based on a semi-analytical model

We present theoretical study of wavelength dependence of mode instability (MI) in high power fiber lasers, which employs an improved semi-analytical theoretical model. The influence of pump / seed wavelength and photodarkening on threshold has been studied. The results indicate promising MI suppression through pumping or seeding at an appropriate wavelength. Small amounts of photodarkening can lead to significant impact on MI.

physics.optics↗

arXiv2015

Giant enhancement in critical current density, up to a hundredfold, in superconducting NaFe0.97Co0.03As single crystals under hydrostatic pressure

Tremendous efforts towards improvement in the critical current density (Jc) of iron based superconductors (FeSCs), especially at relatively low temperatures and magnetic fields, have been made so far through different methods, resulting in real progress. Jc at high temperatures in high fields still needs to be further improved, however, in order to meet the requirements of practical applications. Here, we demonstrate a simple approach to achieve this. Hydrostatic pressure can significantly enhance Jc in NaFe0.97Co0.03As single crystals by at least tenfold at low field and more than a hundredfold at high fields. Significant enhancement in the in-field performance of NaFe0.97Co0.03As single crystal in terms of pinning force density (Fp) is found at high pressures. At high fields, the Fp is over 20 and 80 times higher than under ambient pressure at12K and 14K, respectively, at P=1GPa. We believe that the Co-doped NaFeAs compounds are very exciting and deserve to be more intensively investigated. Finally, it is worthwhile to say that by using hydrostatic pressure, we can achieve more milestones in terms of high Jc values in different superconductors.

cond-mat.supr-con↗