arXiv subjects

Xiang Xu

Publications and source records attributed to Xiang Xu.

At least 55 records · Page 3Linked to original sources

arXiv2026

High-Ti induced planar-fault transformation toward superlattice extrinsic stacking faults and microtwins in crept CoNi-based superalloys

Controlling planar fault shearing mechanisms is key for improving the high-temperature creep performance of gamma prime-strengthened high-temperature superalloys. This work examines how the Ti concentration in L12-strengthened CoNi-based alloys affects planar fault formation during creep. Interrupted compressive creep tests were conducted at 1223 K under air with a constant load stress of 241 MPa. We found, for the first time, that high Ti additions shift the dominant gamma prime shearing mode from antiphase boundaries (APBs) in Ti-free and low-Ti alloys to superlattice extrinsic stacking faults (SESFs). Systematic ab initio calculations show that in high-Ti alloys, the elevated APB energy renders APB-shearing mode unfavorable. Nevertheless, the SESF energy decreases relative to that in low-Ti compositions, and an increased ratio of complex intrinsic stacking fault (CISF) to SESF energy promote the transformation of high-energy CISFs into lower-energy SESFs. Chemical analysis using scanning transmission electron microscopy combined with energy-dispersive X-ray spectroscopy further reveals that, SESFs in high-Ti alloys are enriched in Ti, Mo and W, yet no grid-like ordering is observed. Together with the ab initio calculations, Mo and W additions in high Ti alloys could facilitate the transformation from L12 structure to low-energy D024 structure, indicating Mo and W segregation along SESFs is energetically favourable. Furthermore, the successive SESF thickening facilitates microtwinning in the absence of D024 ordering along SESFs, as an additional big carrier for creep strain. These new findings clarify the role of Ti in controlling planar fault shearing mechanisms, providing new insights for optimizing the creep performance of next-generation CoNi-based superalloys.

cond-mat.mtrl-sci↗

arXiv2025

Hybrid Learning: A Novel Combination of Self-Supervised and Supervised Learning for Joint MRI Reconstruction and Denoising in Low-Field MRI

Deep learning has demonstrated strong potential for MRI reconstruction. However, conventional supervised learning requires high-quality, high-SNR references for network training, which are often difficult or impossible to obtain in different scenarios, particularly in low-field MRI. Self-supervised learning provides an alternative by removing the need for training references, but its reconstruction performance can degrade when the baseline SNR is low. To address these limitations, we propose hybrid learning, a two-stage training framework that integrates self-supervised and supervised learning for joint MRI reconstruction and denoising when only low-SNR training references are available. Hybrid learning is implemented in two sequential stages. In the first stage, self-supervised learning is applied to fully sampled low-SNR data to generate higher-quality pseudo-references. In the second stage, these pseudo-references are used as targets for supervised learning to reconstruct and denoise undersampled noisy data. The proposed technique was evaluated in multiple experiments involving simulated and real low-field MRI in the lung and brain at different field strengths. Hybrid learning consistently improved image quality over both standard self-supervised learning and supervised learning with noisy training references at different acceleration rates, noise levels, and field strengths, achieving higher SSIM and lower NMSE. The hybrid learning approach is effective for both Cartesian and non-Cartesian acquisitions. Hybrid learning provides an effective solution for training deep MRI reconstruction models in the absence of high-SNR references. By improving image quality in low-SNR settings, particularly for low-field MRI, it holds promise for broader clinical adoption of deep learning-based reconstruction methods.

eess.IV↗

arXiv2025

Stability for the inverse random potential scattering problem

This paper is concerned with an inverse random potential problem for the Schrödinger equation. The random potential is assumed to be a generalized Gaussian random function, whose covariance operator is a classical pseudo-differential operator. For the direct problem, the meromorphic continuation of the resolvent of the Schrödinger operator with rough potentials is investigated, which yields the well-posedness of the direct scattering problem and a Born series expansion. For the inverse problem, we derive a probabilistic stability estimate for determining the principle symbol of the covariance operator of the random potential. The stability result provides an estimate of the probability for an event when the principle symbol can be quantitatively determined by a single realization of the multi-frequency backscattered far-field pattern. The analysis employs the ergodicity theory and quantitative analytic continuation principle.

math.AP↗

arXiv2025

Enhanced Spatiotemporal Consistency for Image-to-LiDAR Data Pretraining

LiDAR representation learning has emerged as a promising approach to reducing reliance on costly and labor-intensive human annotations. While existing methods primarily focus on spatial alignment between LiDAR and camera sensors, they often overlook the temporal dynamics critical for capturing motion and scene continuity in driving scenarios. To address this limitation, we propose SuperFlow++, a novel framework that integrates spatiotemporal cues in both pretraining and downstream tasks using consecutive LiDAR-camera pairs. SuperFlow++ introduces four key components: (1) a view consistency alignment module to unify semantic information across camera views, (2) a dense-to-sparse consistency regularization mechanism to enhance feature robustness across varying point cloud densities, (3) a flow-based contrastive learning approach that models temporal relationships for improved scene understanding, and (4) a temporal voting strategy that propagates semantic information across LiDAR scans to improve prediction consistency. Extensive evaluations on 11 heterogeneous LiDAR datasets demonstrate that SuperFlow++ outperforms state-of-the-art methods across diverse tasks and driving conditions. Furthermore, by scaling both 2D and 3D backbones during pretraining, we uncover emergent properties that provide deeper insights into developing scalable 3D foundation models. With strong generalizability and computational efficiency, SuperFlow++ establishes a new benchmark for data-efficient LiDAR-based perception in autonomous driving. The code is publicly available at https://github.com/Xiangxu-0103/SuperFlow

cs.CV↗

arXiv2025

Multi-Modal Data-Efficient 3D Scene Understanding for Autonomous Driving

Efficient data utilization is crucial for advancing 3D scene understanding in autonomous driving, where reliance on heavily human-annotated LiDAR point clouds challenges fully supervised methods. Addressing this, our study extends into semi-supervised learning for LiDAR semantic segmentation, leveraging the intrinsic spatial priors of driving scenes and multi-sensor complements to augment the efficacy of unlabeled datasets. We introduce LaserMix++, an evolved framework that integrates laser beam manipulations from disparate LiDAR scans and incorporates LiDAR-camera correspondences to further assist data-efficient learning. Our framework is tailored to enhance 3D scene consistency regularization by incorporating multi-modality, including 1) multi-modal LaserMix operation for fine-grained cross-sensor interactions; 2) camera-to-LiDAR feature distillation that enhances LiDAR feature learning; and 3) language-driven knowledge guidance generating auxiliary supervisions using open-vocabulary models. The versatility of LaserMix++ enables applications across LiDAR representations, establishing it as a universally applicable solution. Our framework is rigorously validated through theoretical analysis and extensive experiments on popular driving perception datasets. Results demonstrate that LaserMix++ markedly outperforms fully supervised alternatives, achieving comparable accuracy with five times fewer annotations and significantly improving the supervised-only baselines. This substantial advancement underscores the potential of semi-supervised approaches in reducing the reliance on extensive labeled data in LiDAR-based 3D scene understanding systems.

cs.CV↗

arXiv2025

LargeAD: Large-Scale Cross-Sensor Data Pretraining for Autonomous Driving

Recent advancements in vision foundation models (VFMs) have revolutionized visual perception in 2D, yet their potential for 3D scene understanding, particularly in autonomous driving applications, remains underexplored. In this paper, we introduce LargeAD, a versatile and scalable framework designed for large-scale 3D pretraining across diverse real-world driving datasets. Our framework leverages VFMs to extract semantically rich superpixels from 2D images, which are aligned with LiDAR point clouds to generate high-quality contrastive samples. This alignment facilitates cross-modal representation learning, enhancing the semantic consistency between 2D and 3D data. We introduce several key innovations: (i) VFM-driven superpixel generation for detailed semantic representation, (ii) a VFM-assisted contrastive learning strategy to align multimodal features, (iii) superpoint temporal consistency to maintain stable representations across time, and (iv) multi-source data pretraining to generalize across various LiDAR configurations. Our approach achieves substantial gains over state-of-the-art methods in linear probing and fine-tuning for LiDAR-based segmentation and object detection. Extensive experiments on 11 large-scale multi-sensor datasets highlight our superior performance, demonstrating adaptability, efficiency, and robustness in real-world autonomous driving scenarios.

cs.CV↗

arXiv2025

AutoBrep: Autoregressive B-Rep Generation with Unified Topology and Geometry

The boundary representation (B-Rep) is the standard data structure used in Computer-Aided Design (CAD) for defining solid models. Despite recent progress, directly generating B-Reps end-to-end with precise geometry and watertight topology remains a challenge. This paper presents AutoBrep, a novel Transformer model that autoregressively generates B-Reps with high quality and validity. AutoBrep employs a unified tokenization scheme that encodes both geometric and topological characteristics of a B-Rep model as a sequence of discrete tokens. Geometric primitives (i.e., surfaces and curves) are encoded as latent geometry tokens, and their structural relationships are defined as special topological reference tokens. Sequence order in AutoBrep naturally follows a breadth first traversal of the B-Rep face adjacency graph. At inference time, neighboring faces and edges along with their topological structure are progressively generated. Extensive experiments demonstrate the advantages of our unified representation when coupled with next-token prediction for B-Rep generation. AutoBrep outperforms baselines with better quality and watertightness. It is also highly scalable to complex solids with good fidelity and inference speed. We further show that autocompleting B-Reps is natively supported through our unified tokenization, enabling user-controllable CAD generation with minimal changes. Code is available at https://github.com/AutodeskAILab/AutoBrep.

cs.CV↗

arXiv2025

B-Rep Distance Functions (BR-DF): How to Represent a B-Rep Model by Volumetric Distance Functions?

This paper presents a novel geometric representation for CAD Boundary Representation (B-Rep) based on volumetric distance functions, dubbed B-Rep Distance Functions (BR-DF). BR-DF encodes the surface mesh geometry of a CAD model as signed distance function (SDF). B-Rep vertices, edges, faces and their topology information are encoded as per-face unsigned distance functions (UDFs). An extension of the Marching Cubes algorithm converts BR-DF directly into watertight CAD B-Rep model (strictly speaking a faceted B-Rep model). A surprising characteristic of BR-DF is that this conversion process never fails. Leveraging the volumetric nature of BR-DF, we propose a multi-branch latent diffusion with 3D U-Net backbone for jointly generating the SDF and per-face UDFs of a BR-DF model. Our approach achieves comparable CAD generation performance against SOTA methods while reaching the unprecedented 100% success rate in producing (faceted) B-Rep models.

cs.CV↗

arXiv2025

A computational inverse random source problem for elastic waves

This paper investigates the inverse random source problem for elastic waves in three dimensions, where the source is assumed to be driven by an additive white noise. A novel computational method is proposed for reconstructing the variance of the random source from the correlation boundary measurement of the wave field. Compared with existing multi-frequency iterative approaches, our method is non-iterative and requires data at only a single frequency. As a result, the computational cost is significantly reduced. Furthermore, rigorous error analysis is conducted for the proposed method, which gives a quantitative error estimate. Numerical examples are presented to demonstrate effectiveness of the proposed method. Moreover, this method can to be directly applied to stochastic Maxwell equations.

math.NA↗

arXiv2025

Salient Concept-Aware Generative Data Augmentation

Recent generative data augmentation methods conditioned on both image and text prompts struggle to balance between fidelity and diversity, as it is challenging to preserve essential image details while aligning with varied text prompts. This challenge arises because representations in the synthesis process often become entangled with non-essential input image attributes such as environmental contexts, creating conflicts with text prompts intended to modify these elements. To address this, we propose a personalized image generation framework that uses a salient concept-aware image embedding model to reduce the influence of irrelevant visual details during the synthesis process, thereby maintaining intuitive alignment between image and text inputs. By generating images that better preserve class-discriminative features with additional controlled variations, our framework effectively enhances the diversity of training datasets and thereby improves the robustness of downstream models. Our approach demonstrates superior performance across eight fine-grained vision datasets, outperforming state-of-the-art augmentation methods with averaged classification accuracy improvements by 0.73% and 6.5% under conventional and long-tail settings, respectively.

cs.CV↗

arXiv2025

A Survey of Reinforcement Learning for Large Reasoning Models

In this paper, we survey recent advances in Reinforcement Learning (RL) for reasoning with Large Language Models (LLMs). RL has achieved remarkable success in advancing the frontier of LLM capabilities, particularly in addressing complex logical tasks such as mathematics and coding. As a result, RL has emerged as a foundational methodology for transforming LLMs into LRMs. With the rapid progress of the field, further scaling of RL for LRMs now faces foundational challenges not only in computational resources but also in algorithm design, training data, and infrastructure. To this end, it is timely to revisit the development of this domain, reassess its trajectory, and explore strategies to enhance the scalability of RL toward Artificial SuperIntelligence (ASI). In particular, we examine research applying RL to LLMs and LRMs for reasoning abilities, especially since the release of DeepSeek-R1, including foundational components, core problems, training resources, and downstream applications, to identify future opportunities and directions for this rapidly evolving area. We hope this review will promote future research on RL for broader reasoning models. Github: https://github.com/TsinghuaC3I/Awesome-RL-for-LRMs

cs.CL↗

arXiv2025

Uniqueness Result For Semi-linear Wave Equations With Sources

This paper addresses the inverse problem of simultaneously recovering multiple unknown parameters for semilinear wave equations from boundary measurements. We consider an initial-boundary value problem for a wave equation with a general semilinear term and an internal source. The inverse problem is to determine the nonlinear coefficients (potentials), the source term, and the initial data from the Dirichlet-to-Neumann (DtN) map. Our approach combines higher-order linearization and the construction of complex geometrical optics (CGO) solutions. The main results establish that while unique recovery is not always possible, we can precisely characterize the gauge equivalence classes in the solutions to this inverse problem. For a wave equation with a polynomial nonlinearity of degree $n$, we prove that only the highest-order coefficient can be uniquely determined from the DtN map; the lower-order coefficients and the source can only be recovered up to a specific gauge transformation involving a function $ψ$. Furthermore, we provide sufficient conditions under which unique determination of all parameters is guaranteed. We also extend these results to various specific non-polynomial nonlinearities, demonstrating that the nature of the nonlinearity critically influences whether unique recovery or a gauge symmetry is obtained.

math.AP↗

arXiv2025

Kant: An Efficient Unified Scheduling System for Large-Scale AI Clusters

As AI cluster sizes continue to expand and the demand for large-language-model (LLM) training and inference workloads grows rapidly, traditional scheduling systems face significant challenges in balancing resource utilization, scheduling efficiency, and service quality. This paper presents and evaluates Kant: an efficient unified scheduling platform designed for large-scale AI container clusters, supporting the co-scheduling of both training and inference jobs. Based on the practical implementation of the Kant system, we systematically define a set of key evaluation metrics for AI clusters, including GPU Allocation Ratio (GAR), Scheduling Occupancy Rate (SOR), GPU Node Fragmentation Ratio (GFR), Job Waiting Time Distribution (JWTD), and Job Training Time Estimation Distribution (JTTED), providing a foundation for quantitative performance analysis. Experimental results demonstrate that Kant achieves exceptional performance in clusters ranging from hundreds to tens of thousands of GPUs. By leveraging scheduling strategies such as Backfill and Enhanced Binpack (E-Binpack), the system significantly improves resource utilization and scheduling efficiency, while effectively reducing resource fragmentation and communication overhead in distributed training. The system has been deployed in multiple AI data center clusters, where it stably supports large-scale intelligent computing workloads. This work provides a practical engineering approach for building high-performance, highly available, AI-native scheduling infrastructure.

cs.DC↗

arXiv2025

SKYLENAGE Technical Report: Mathematical Reasoning and Contest-Innovation Benchmarks for Multi-Level Math Evaluation

Large language models (LLMs) now perform strongly on many public math suites, yet frontier separation within mathematics increasingly suffers from ceiling effects. We present two complementary benchmarks: SKYLENAGE-ReasoningMATH, a 100-item, structure-aware diagnostic set with per-item metadata on length, numeric density, and symbolic complexity; and SKYLENAGE-MATH, a 150-item contest-style suite spanning four stages from high school to doctoral under a seven-subject taxonomy. We evaluate fifteen contemporary LLM variants under a single setup and analyze subject x model and grade x model performance. On the contest suite, the strongest model reaches 44% while the runner-up reaches 37%; accuracy declines from high school to doctoral, and top systems exhibit a doctoral-to-high-school retention near 79%. On the reasoning set, the best model attains 81% overall, and hardest-slice results reveal clear robustness gaps between leaders and the mid-tier. In summary, we release SKYLENAGE-ReasoningMATH and report aggregate results for SKYLENAGE-MATH; together, SKYLENAGE provides a hard, reasoning-centered and broadly covering math benchmark with calibrated difficulty and rich metadata, serving as a reference benchmark for future evaluations of mathematical reasoning.

cs.CL↗

arXiv2025

Ice-assisted soft-landing deposition for van der Waals integration

Van der Waals integration enables the creation of electronic and optoelectronic devices with unprecedented performance and novel functionalities beyond the existing material limitations. However, it is typically realized using a physical pick-up-and-place process to minimize interfacial damages and is hardly integrated into conventional lithography and metallization procedures. Here we demonstrate a simple in situ transfer strategy for van der Waals integration, in which a thin film of amorphous water ice acts as a buffer layer to shield against the bombardment of energetic clusters during metallization. After ice sublimation, the deposited metal film can be gently and in situ placed onto underlying substrates, to form an atomically clean and damage-free metal-semiconductor interface. This strategy allows ultra-clean and non-destructive fabrication of high-quality contacts on monolayer MoS2, which is extremely beneficial to produce a high-performance 2D field-effect transistor with an ultra-high on/off ratio of 1010, mobility of 80 (cm2 V-1s-1), and also with reduced Fermi level pinning effect. We also demonstrate the batch production of CVD-grown MoS2 transistor arrays with uniform electrical characteristics. Such a gentle and ultra-clean fabrication approach has been further extended to materials with high reactivity, such as halide perovskites. Our method can be easily integrated with mature semiconductor manufacturing technology and may become a generic strategy for fabricating van der Waals contacted devices.

cond-mat.mtrl-sci↗

arXiv2025

Lattice distortions and non-sluggish diffusion in BCC refractory high entropy alloys

Refractory high-entropy alloys (RHEAs) have emerged as promising candidates for extreme high-temperature applications, for example, in next-generation turbines and nuclear reactors. In such applications, atomic diffusion critically governs essential properties including creep resistance and microstructural stability. The present study systematically investigates impurity diffusion of Co, Mn, and Zn in single phase (BCC solid solution) HfTiZrNbTa and HfTiZrNbV RHEAs applying the radiotracer technique. A neutron total scattering technique is used to evaluate the pair distribution functions and element-specific lattice distortions in these alloys. \textit{Ab initio}-based calculations give access to lattice distortions and solubilities of the impurities under investigation, including the impact of short-range order. The diffusion results are discussed in relation to calculated substitutional and interstitial solution energies, local lattice distortions, and short-range order effects. Co diffusion is found to be dominated by the interstitial mechanism, exhibiting fast diffusion. These findings reveal important structure-property relationships between local atomic environments and diffusion kinetics in BCC RHEAs, providing critical insights for designing alloys with enhanced high-temperature performance through targeted control of impurity diffusion processes.

cond-mat.mtrl-sci↗

arXiv2025

Accurate complex-stacking-fault Gibbs energy in Ni3Al at high temperatures

To gain a deeper insight into the anomalous yield behavior of Ni3Al, it is essential to obtain temperature-dependent formation Gibbs energies of the relevant planar defects. Here, the Gibbs energy of the complex stacking fault (CSF) is evaluated using a recently proposed ab initio framework [Acta Materialia, 255 (2023) 118986], accounting for all thermal contributions - including anharmonicity and paramagnetism - up to the melting point. The CSF energy shows a moderate decrease from 300K to about 1200 K, followed by a stronger drop. We demonstrate the necessity to carefully consider the individual thermal excitations. We also propose a way to analyze the origin of the significant anharmonic contribution to the CSF energy through atomic pair distributions at the CSF plane. With the newly available high-temperature CSF data, an increasing energy barrier for the cross-slip process in Ni3Al with increasing temperature is unveiled, necessitating the refinement of existing analytical models.

cond-mat.mtrl-sci↗

arXiv2025

PML method for the stochastic acoustic scattering problem driven by an additive Gaussian noise

This paper is concerned with the time-domain stochastic acoustic scattering problem driven by a spatially white additive Gaussian noise. The main contributions of the work are twofold. First, we prove the existence and uniqueness of the pathwise solution to the scattering problem by applying an abstract Laplace transform inversion theorem. The analysis employs the black box scattering theory to investigate the meromorphic continuation of the Helmholtz resolvent defined on rough fields. Second, based on the piecewise constant approximation of the white noise, we construct an approximate wave solution and establish the error estimate. As a consequence, we develop a PML method and establish the convergence analysis with explicit dependence on the PML layer's thickness and medium properties, as well as the piecewise constant approximation of the white noise.

math.NA↗