arXiv Science⌕ Search

arXiv subjects

Wei Zhou

Publications and source records attributed to Wei Zhou.

At least 469 records · Page 26Linked to original sources
arXiv2017

Gated Tuned Superconductivity and Phonon Softening in Mono- and Bilayer MoS$_2$

Superconductors at the atomic two-dimensional (2D) limit are the focus of an enduring fascination in the condensed matter community. This is because, with reduced dimensions, the effects of disorders, fluctuations, and correlations in superconductors become particularly prominent at the atomic 2D limit; thus such superconductors provide opportunities to tackle tough theoretical and experimental challenges. Here, based on the observation of ultrathin 2D superconductivity in mono- and bilayer molybdenum disulfide (MoS$_2$) with electric-double-layer (EDL) gating, we found that the critical sheet carrier density required to achieve superconductivity in a monolayer MoS$_2$ flake can be as low as 0.55*10$^{14}$cm$^{-2}$, which is much lower than those values in the bilayer and thicker cases in previous report and also our own observations. Further comparison of the phonon dispersion obtained by ab initio calculations indicated that the phonon softening of the acoustic modes around the M point plays a key role in the gate-induced superconductivity within the Bardeen-Cooper Schrieffer (BCS) theory framework. This result might help enrich the understanding of 2D superconductivity with EDL gating.

cond-mat.mes-hall↗
arXiv2017

Histograms of Gaussian normal distribution for feature matching in clutter scenes

3D feature descriptor provide information between corresponding models and scenes. 3D objection recognition in cluttered scenes, however, remains a largely unsolved problem. Practical applications impose several challenges which are not fully addressed by existing methods. Especially in cluttered scenes there are many feature mismatches between scenes and models. We therefore propose Histograms of Gaussian Normal Distribution (HGND) for extracting salient features on a local reference frame (LRF) that enables us to solve this problem. We propose a LRF on each local surface patches using the scatter matrix's eigenvectors. Then the HGND information of each salient point is calculated on the LRF, for which we use both the mesh and point data of the depth image. Experiments on 45 cluttered scenes of the Bologna Dataset and 50 cluttered scenes of the UWA Dataset are made to evaluate the robustness and descriptiveness of our HGND. Experiments carried out by us demonstrate that HGND obtains a more reliable matching rate than state-of-the-art approaches in cluttered situations.

cs.CV↗
arXiv2017

Fast, deterministic computation of the Hermite normal form and determinant of a polynomial matrix

Given a nonsingular $n \times n$ matrix of univariate polynomials over a field $\mathbb{K}$, we give fast and deterministic algorithms to compute its determinant and its Hermite normal form. Our algorithms use $\widetilde{\mathcal{O}}(n^ω\lceil s \rceil)$ operations in $\mathbb{K}$, where $s$ is bounded from above by both the average of the degrees of the rows and that of the columns of the matrix and $ω$ is the exponent of matrix multiplication. The soft-$O$ notation indicates that logarithmic factors in the big-$O$ are omitted while the ceiling function indicates that the cost is $\widetilde{\mathcal{O}}(n^ω)$ when $s = o(1)$. Our algorithms are based on a fast and deterministic triangularization method for computing the diagonal entries of the Hermite form of a nonsingular matrix.

cs.SC↗
arXiv2016

Asymptotic behaviors of bivariate Gaussian powered extremes

In this paper, joint asymptotics of powered maxima for a triangular array of bivariate powered Gaussian random vectors are considered. Under the Hüsler-Reiss condition, limiting distributions of powered maxima are derived. Furthermore, the second-order expansions of the joint distributions of powered maxima are established under the refined Hüsler-Reiss condition.

math.PR↗
arXiv2016

Detailed study of the column-based priority logic readout of Topmetal-II- CMOS pixel direct charge sensor

We present the detailed study of the digital readout of Topmetal-II- CMOS pixel direct charge sensor. Topmetal-II- is an integrated sensor with an array of 72X72 pixels each capable of directly collecting external charge through exposed metal electrodes in the topmost metal layer. In addition to the time-shared multiplexing readout of the analog output from Charge Sensitive Amplifiers in each pixel, hits are also generated through comparators with individually DAC settable thresholds in each pixel. The hits are read out via a column-based priority logic structure, retaining both hit location and time information. The in-array column-based priority logic is fully combinational hence there is no clock distributed in the pixel array. Sequential logic and clock are placed on the peripheral of the array. We studied the detailed working behavior and performance of this readout, and demonstrated its potential in imaging applications.

physics.ins-det↗
arXiv2016

Quadboost: A Scalable Concurrent Quadtree

Building concurrent spatial trees is more complicated than binary search trees since a space hierarchy should be preserved during modifications. We present a non-blocking quadtree-quadboost-that supports concurrent insert, remove, move, and contain operations. To increase its concurrency, we propose a decoupling approach that separates physical adjustment from logical removal within the remove operation. In addition, we design a continuous find mechanism to reduce its search cost. The move operation combines the searches for different keys together and modifies different positions with atomicity. The experimental results show that quadboost scales well on a multi-core system with 32 hardware threads. More than that, it outperforms existing concurrent trees in retrieving two-dimensional keys with up to 109% improvement when the number of threads is large. The move operation proved to perform better than the best-known algorithm, with up to 47%.

cs.DS↗
arXiv2016

Test of \textit{Topmetal-${II}^-$} In Liquid Nitrogen For Cryogenic Temperature TPCs

\textit{Topmetal-${II}^-$} is a highly pixelated direct charge sensor that contains a 72${\times}$72 pixel array of 83$μ$m pitch size. The key feature of \textit{Topmetal-${II}^-$} is that it can directly collect charges via metal nodes of each pixel to form two-dimensional images of charge cloud distributions. \textit{Topmetal-${II}^-$} was proved to measure charged particles without amplification at room temperature. To measure its performance at cryogenic temperature, a \textit{Topmetal-${II}^-$} sensor is embedded into a liquid nitrogen dewar. The results presented in this paper show that \textit{Topmetal-${II}^-$} can also operate well at this low temperature with a noise (ENC) of 12 e$^-$ lower than that at room temperature (13 e$^-$). From the noise perspective, \textit{Topmetal-${II}^-$} is a promising candidate for the next generation readout of liquid argon and xenon Time Projection Chamber (TPC) used in experiments searching for neutrinoless double beta decay and dark matter.

physics.ins-det↗
arXiv2016

Anisotropic Ginzburg-Landau scaling of Hc2 and transport properties of 112-type Ca0.8La0.2Fe0.98Co0.02As2 single crystal

High-quality single crystal of Ca0.8La0.2Fe0.98Co0.02As2 has been successfully synthesized using a self-flux method. The magnetization measurement reveals a second peak effect and high critical current density exceeding 2*10^6 A/cm2 at 5 K(self-field). The upper critical field anisotropy was systematically studied by measuring the electrical resistivity under various magnetic fields and angles. The angle dependent magnetoresistance, by choosing an appropriate anisotropy parameter within the framework of the anisotropic Ginzburg Landau (AGL) theory, can be scaled onto one single curve. In the normal state, the negative Hall coefficient shows strong but nonmonotonic T-dependence through a minimum at 175 K. Moreover, it is shown that the magnetoresistance apparently violates the semiclassical Kohler's rule below 175 K but can be well scaled by the Hall angle instead. This suggests either the change of carriers with T or the exotic anisotropic scattering in the system.

cond-mat.supr-con↗
arXiv2016

A fast, deterministic algorithm for computing a Hermite Normal Form of a polynomial matrix

Given a square, nonsingular matrix of univariate polynomials $\mathbf{F} \in \mathbb{K}[x]^{n \times n}$ over a field $\mathbb{K}$, we give a fast, deterministic algorithm for finding the Hermite normal form of $\mathbf{F}$ with complexity $O^{\sim}\left(n^ωd\right)$ where $d$ is the degree of $\mathbf{F}$. Here soft-$O$ notation is Big-$O$ with log factors removed and $ω$ is the exponent of matrix multiplication. The method relies of a fast algorithm for determining the diagonal entries of its Hermite normal form, having as cost $O^{\sim}\left(n^ωs\right)$ operations with $s$ the average of the column degrees of $\mathbf{F}$.

cs.SC↗
arXiv2016

Broadband Photovoltaic Detectors based on an Atomically Thin Heterostructure

Van der Waals junctions of two-dimensional materials with an atomically sharp interface open up unprecedented opportunities to design and study functional heterostructures. Semiconducting transition metal dichalcogenides have shown tremendous potential for future applications due to their unique electronic properties and strong light-matter interaction. However, many important optoelectronic applications, such as broadband photodetection, are severely hindered by their limited spectral range and reduced light absorption. Here, we present a p-g-n heterostructure formed by sandwiching graphene with a gapless bandstructure and wide absorption spectrum in an atomically thin p-n junction to overcome these major limitations. We have successfully demonstrated a MoS2-graphene-WSe2 heterostructure for broadband photodetection in the visible to short-wavelength infrared range at room temperature that exhibits competitive device performance, including a specific detectivity of up to 1011 Jones in the near-infrared region. Our results pave the way toward the implementation of atomically thin heterostructures for broadband and sensitive optoelectronic applications.

cond-mat.mtrl-sci↗
arXiv2016

Higher-order expansions of powered extremes of normal samples

In this paper, higher-order expansions for distributions and densities of powered extremes of standard normal random sequences are established under an optimal choice of normalized constants. Our findings refine the related results in Hall (1980). Furthermore, it is shown that the rate of convergence of distributions/densities of normalized extremes depends in principle on the power index.

math.PR↗
arXiv2015

A Low-Noise CMOS Pixel Direct Charge Sensor, Topmetal-II-

We report the design and characterization of a CMOS pixel direct charge sensor, Topmetal-II-, fabricated in a standard 0.35um CMOS Integrated Circuit process. The sensor utilizes exposed metal patches on top of each pixel to directly collect charge. Each pixel contains a low-noise charge-sensitive preamplifier to establish the analog signal and a discriminator with tunable threshold to generate hits. The analog signal from each pixel is accessible through time-shared multiplexing over the entire array. Hits are read out digitally through a column-based priority logic structure. Tests show that the sensor achieved a <15e- analog noise and a 200e- minimum threshold for digital readout per pixel. The sensor is capable of detecting both electrons and ions drifting in gas. These characteristics enable its use as the charge readout device in future Time Projection Chambers without gaseous gain mechanism, which has unique advantages in low background and low rate-density experiments.

physics.ins-det↗
arXiv2015

High responsivity phototransistors based on few-layer ReS2 for weak signal detection

Two-dimensional transition metal dichalcogenides are emerging with tremendous potential in many optoelectronic applications due to their strong light-matter interactions. To fully explore their potential in photoconductive detectors, high responsivity and weak signal detection are required. Here, we present high responsivity phototransistors based on few-layer rhenium disulfide (ReS2). Depending on the back gate voltage, source drain bias and incident optical light intensity, the maximum attainable photoresponsivity can reach as high as 88,600 A W-1, which is a record value compared to other two-dimensional materials with similar device structures and two orders of magnitude higher than that of monolayer MoS2. Such high photoresponsivity is attributed to the increased light absorption as well as the gain enhancement due to the existence of trap states in the few-layer ReS2 flakes. It further enables the detection of weak signals, as successfully demonstrated with weak light sources including a lighter and limited fluorescent lighting. Our studies underscore ReS2 as a promising material for future sensitive optoelectronic applications.

cond-mat.mtrl-sci↗
arXiv2015

Raman vibrational spectra of bulk to monolayer ReS2 with lower symmetry

Lattice structure and symmetry of two-dimensional (2D) layered materials are of key importance to their fundamental mechanical, thermal, electronic and optical properties. Raman spectroscopy, as a convenient and nondestructive tool, however has its limitations on identifying all symmetry allowing Raman modes and determining the corresponding crystal structure of 2D layered materials with high symmetry like graphene and MoS2. Due to lower structural symmetry and extraordinary weak interlayer coupling of ReS2, we successfully identified all 18 first-order Raman active modes for bulk and monolayer ReS2. Without van der Waals (vdW) correction, our local density approximation (LDA) calculations successfully reproduce all the Raman modes. Our calculations also suggest no surface reconstruction effect and the absence of low frequency rigid-layer Raman modes below 100 cm-1. Combining with Raman and LDA thus provides a general approach for studying the vibrational and structural properties of 2D layered materials with lower symmetry.

cond-mat.mes-hall↗
arXiv2015

The positive piezoconductive effect in graphene

As the thinnest conductive and elastic material, graphene is expected to play a crucial role in post-Moore era. Besides applications on electronic devices, graphene has shown great potential for nano-electromechanical systems. While interlayer interactions play a key role in modifying the electronic structures of layered materials, no attention has been given to their impact on electromechanical properties. Here we report the positive piezoconductive effect observed in suspended bi- and multi-layer graphene. The effect is highly layer number dependent and shows the most pronounced response for tri-layer graphene. The effect, and its dependence on the layer number, can be understood as resulting from the strain-induced competition between interlayer coupling and intralayer transport, as confirmed by the numerical calculations based on the non-equilibrium Green's function method. Our results enrich the understanding of graphene and point to layer number as a powerful tool for tuning the electromechanical properties of graphene for future applications.

cond-mat.mes-hall↗
arXiv2015

High Resolution Image Reconstruction Method for a Double-plane PET System with Changeable Spacing

Positron Emission Mammography (PEM) imaging systems with the ability in detection of millimeter-sized tumors were developed in recent years. And some of them have been well used in clinical applications. In consideration of biopsy application, a double-plane detector configuration is practical for the convenience of breast immobilization. However, the serious blurring effect in the double-plane system with changeable spacing for different breast size should be studied. Methods: We study a high resolution reconstruction method applicable for a double-plane PET system with a changeable detector spacing. Geometric and blurring components should be calculated at real time for different detector distance. Accurate geometric sensitivity is obtained with a tube area model. Resolution recovery is achieved by estimating blurring effects derived from simulated single gamma response information. Results: The results show that the new geometric modeling gives a more finite and smooth sensitivity weight in double-plane system. The blurring component yields contrast recovery levels that could not be reached without blurring modeling, as well as better visual recovery of the smallest spheres and better delineation of the structures in the reconstructed images. Statistical noise has lower variance at the voxel level with blurring modeling than without at matched resolution. Conclusion: In the distance-changeable double-plane PET, the finite resolution modeling during reconstruction achieves resolution recovery, without noise amplification.

physics.med-ph↗