arXiv subjects

Wei Zhou

Publications and source records attributed to Wei Zhou.

At least 415 records · Page 23Linked to original sources

arXiv2020

Two low-power optical data transmission ASICs for the ATLAS Liquid Argon Calorimeter readout upgrade

A serializer ASIC and a VCSEL driver ASIC are needed for the front-end optical data transmission in the ATLAS liquid argon calorimeter readout phase-I upgrade. The baseline ASICs are the serializer LOCx2 and the VCSEL driver LOCld, designed in a 0.25-μm Silicon-on-Sapphire (SoS) CMOS technology and consumed 843 mW and 320 mW, respectively. Based on a 130-nm CMOS technology, we design two pin-to-pin-compatible backup ASICs, LOCx2-130 and LOCld-130. Their power consumptions are much lower then of their counterparts, whereas other performance, such as the latency, data rate, and radiation tolerance, meet the phase-I upgrade requirements. We present the design of LOCx2-130 and LOCld-130. The test results of LOCx2-130 are also presented.

physics.ins-det↗

arXiv2020

The Latency Validation of the Optical Link for the ATLAS Liquid Argon Calorimeter Phase-I Trigger Upgrade

Two optical data link data transmission Application Specific Integrated Circuits (ASICs), the baseline and its backup, have been designed for the ATLAS Liquid Argon (LAr) Calorimeter Phase-I trigger upgrade. The latency of each ASIC and that of its corresponding receiver implemented in a back-end Field-Programmable Gate Array (FPGA) are critical specifications. In this paper, we present the latency measurements and simulation of two ASICs. The measurement results indicate that both ASICs achieve their design goals and meet the latency specifications. The consistency between the simulation and measurements validates the ASIC latency characterization.

physics.ins-det↗

arXiv2020

LOCx2-130, a low-power, low-latency, 2 x 4.8-Gbps serializer ASIC for detector front-end readout

In this paper, we present the design and test results of LOCx2-130, a low-power, low-latency, dual-channel transmitter ASIC for detector front-end readout. LOCx2-130 has two channels of encoders and serializers, and each channel operates at 4.8 Gbps. LOCx2-130 can interface with three types of ADCs, an ASIC ADC and two COTS ADCs. LOCx2-130 is fabricated in a commercial 130-nm CMOS technology and is packaged in a 100-pin QFN package. LOCx2-130 consumes 440 mW and achieves a latency of less than 40.7 ns.

physics.ins-det↗

arXiv2020

Deep Local and Global Spatiotemporal Feature Aggregation for Blind Video Quality Assessment

In recent years, deep learning has achieved promising success for multimedia quality assessment, especially for image quality assessment (IQA). However, since there exist more complex temporal characteristics in videos, very little work has been done on video quality assessment (VQA) by exploiting powerful deep convolutional neural networks (DCNNs). In this paper, we propose an efficient VQA method named Deep SpatioTemporal video Quality assessor (DeepSTQ) to predict the perceptual quality of various distorted videos in a no-reference manner. In the proposed DeepSTQ, we first extract local and global spatiotemporal features by pre-trained deep learning models without fine-tuning or training from scratch. The composited features consider distorted video frames as well as frame difference maps from both global and local views. Then, the feature aggregation is conducted by the regression model to predict the perceptual video quality. Finally, experimental results demonstrate that our proposed DeepSTQ outperforms state-of-the-art quality assessment algorithms.

eess.IV↗

arXiv2020

Blind Omnidirectional Image Quality Assessment with Viewport Oriented Graph Convolutional Networks

Quality assessment of omnidirectional images has become increasingly urgent due to the rapid growth of virtual reality applications. Different from traditional 2D images and videos, omnidirectional contents can provide consumers with freely changeable viewports and a larger field of view covering the $360^{\circ}\times180^{\circ}$ spherical surface, which makes the objective quality assessment of omnidirectional images more challenging. In this paper, motivated by the characteristics of the human vision system (HVS) and the viewing process of omnidirectional contents, we propose a novel Viewport oriented Graph Convolution Network (VGCN) for blind omnidirectional image quality assessment (IQA). Generally, observers tend to give the subjective rating of a 360-degree image after passing and aggregating different viewports information when browsing the spherical scenery. Therefore, in order to model the mutual dependency of viewports in the omnidirectional image, we build a spatial viewport graph. Specifically, the graph nodes are first defined with selected viewports with higher probabilities to be seen, which is inspired by the HVS that human beings are more sensitive to structural information. Then, these nodes are connected by spatial relations to capture interactions among them. Finally, reasoning on the proposed graph is performed via graph convolutional networks. Moreover, we simultaneously obtain global quality using the entire omnidirectional image without viewport sampling to boost the performance according to the viewing experience. Experimental results demonstrate that our proposed model outperforms state-of-the-art full-reference and no-reference IQA metrics on two public omnidirectional IQA databases.

eess.IV↗

arXiv2020

LIRA: Lifelong Image Restoration from Unknown Blended Distortions

Most existing image restoration networks are designed in a disposable way and catastrophically forget previously learned distortions when trained on a new distortion removal task. To alleviate this problem, we raise the novel lifelong image restoration problem for blended distortions. We first design a base fork-join model in which multiple pre-trained expert models specializing in individual distortion removal task work cooperatively and adaptively to handle blended distortions. When the input is degraded by a new distortion, inspired by adult neurogenesis in human memory system, we develop a neural growing strategy where the previously trained model can incorporate a new expert branch and continually accumulate new knowledge without interfering with learned knowledge. Experimental results show that the proposed approach can not only achieve state-of-the-art performance on blended distortions removal tasks in both PSNR/SSIM metrics, but also maintain old expertise while learning new restoration tasks.

eess.IV↗

arXiv2020

Topological Dirac states in a layered telluride TaPdTe$_5$ with quasi-one-dimensional PdTe$_2$ chains

We report the synthesis and systematic studies of a new layered ternary telluride TaPdTe5 with quasi-one-dimensional PdTe2 chains. This compound crystalizes in a layered orthorhombic structure with space group Cmcm. Analysis of its curved field-dependent Hall resistivity, using the two-band model, indicates the hole-dominated transport with a high mobility $μ_h$ = 2.38 $\times$ 10$^3$ cm$^2$ V$^{-1}$ s$^{-1}$ at low temperatures. The in-plane magnetoresistance (MR) displays significant anisotropy with field applied along the crystallographic $b$ axis. The MR with the current applied along the $c$-axis is also measured in high magnetic fields up to 51.7 T. Remarkably, it follows a power-law dependence and reaches (9.5 $\times$ 10$^3$)% at 2.1 K without any signature of saturation. The De Haas-van Alphen oscillations show a small Fermi-surface pocket with a nontrivial Berry phase. The Shubnikov-de Haas (SdH) oscillations are detected at low temperatures and under magnetic fields above 28.5 T. Two effective masses $m^*$ (0.26$m_e$ and 0.41$m_e$) are extracted from the oscillatory SdH data. Our first-principles calculations unveil a topological Dirac cone in its surface states, and, in particular, the topological index indicates that TaPdTe$_5$ is a topologically nontrivial material.

cond-mat.str-el↗

arXiv2020

Adaptive support driven Bayesian reweighted algorithm for sparse signal recovery

Sparse learning has been widely studied to capture critical information from enormous data sources in the filed of system identification. Often, it is essential to understand internal working mechanisms of unknown systems (e.g. biological networks) in addition to input-output relationships. For this purpose, various feature selection techniques have been developed. For example, sparse Bayesian learning (SBL) was proposed to learn major features from a dictionary of basis functions, which makes identified models interpretable. Reweighted L1-regularization algorithms are often applied in SBL to solve optimization problems. However, they are expensive in both computation and memory aspects, thus not suitable for large-scale problems. This paper proposes an adaptive support driven Bayesian reweighted (ASDBR) algorithm for sparse signal recovery. A restart strategy based on shrinkage-thresholding is developed to conduct adaptive support estimate, which can effectively reduce computation burden and memory demands. Moreover, ASDBR accurately extracts major features and excludes redundant information from large datasets. Numerical experiments demonstrate the proposed algorithm outperforms state-of-the-art methods.

eess.SP↗

arXiv2020

Robust Beam Search for Encoder-Decoder Attention Based Speech Recognition without Length Bias

As one popular modeling approach for end-to-end speech recognition, attention-based encoder-decoder models are known to suffer the length bias and corresponding beam problem. Different approaches have been applied in simple beam search to ease the problem, most of which are heuristic-based and require considerable tuning. We show that heuristics are not proper modeling refinement, which results in severe performance degradation with largely increased beam sizes. We propose a novel beam search derived from reinterpreting the sequence posterior with an explicit length modeling. By applying the reinterpreted probability together with beam pruning, the obtained final probability leads to a robust model modification, which allows reliable comparison among output sequences of different lengths. Experimental verification on the LibriSpeech corpus shows that the proposed approach solves the length bias problem without heuristics or additional tuning effort. It provides robust decision making and consistently good performance under both small and very large beam sizes. Compared with the best results of the heuristic baseline, the proposed approach achieves the same WER on the 'clean' sets and 4% relative improvement on the 'other' sets. We also show that it is more efficient with the additional derived early stopping criterion.

eess.AS↗

arXiv2020

Learning Disentangled Feature Representation for Hybrid-distorted Image Restoration

Hybrid-distorted image restoration (HD-IR) is dedicated to restore real distorted image that is degraded by multiple distortions. Existing HD-IR approaches usually ignore the inherent interference among hybrid distortions which compromises the restoration performance. To decompose such interference, we introduce the concept of Disentangled Feature Learning to achieve the feature-level divide-and-conquer of hybrid distortions. Specifically, we propose the feature disentanglement module (FDM) to distribute feature representations of different distortions into different channels by revising gain-control-based normalization. We also propose a feature aggregation module (FAM) with channel-wise attention to adaptively filter out the distortion representations and aggregate useful content information from different channels for the construction of raw image. The effectiveness of the proposed scheme is verified by visualizing the correlation matrix of features and channel responses of different distortions. Extensive experimental results also prove superior performance of our approach compared with the latest HD-IR schemes.

cs.CV↗

arXiv2020

Rethinking Distributional Matching Based Domain Adaptation

Domain adaptation (DA) is a technique that transfers predictive models trained on a labeled source domain to an unlabeled target domain, with the core difficulty of resolving distributional shift between domains. Currently, most popular DA algorithms are based on distributional matching (DM). However in practice, realistic domain shifts (RDS) may violate their basic assumptions and as a result these methods will fail. In this paper, in order to devise robust DA algorithms, we first systematically analyze the limitations of DM based methods, and then build new benchmarks with more realistic domain shifts to evaluate the well-accepted DM methods. We further propose InstaPBM, a novel Instance-based Predictive Behavior Matching method for robust DA. Extensive experiments on both conventional and RDS benchmarks demonstrate both the limitations of DM methods and the efficacy of InstaPBM: Compared with the best baselines, InstaPBM improves the classification accuracy respectively by $4.5\%$, $3.9\%$ on Digits5, VisDA2017, and $2.2\%$, $2.9\%$, $3.6\%$ on DomainNet-LDS, DomainNet-ILDS, ID-TwO. We hope our intuitive yet effective method will serve as a useful new direction and increase the robustness of DA in real scenarios. Code will be available at anonymous link: https://github.com/pikachusocute/InstaPBM-RobustDA.

cs.CV↗

arXiv2020

DyHGCN: A Dynamic Heterogeneous Graph Convolutional Network to Learn Users' Dynamic Preferences for Information Diffusion Prediction

Information diffusion prediction is a fundamental task for understanding the information propagation process. It has wide applications in such as misinformation spreading prediction and malicious account detection. Previous works either concentrate on utilizing the context of a single diffusion sequence or using the social network among users for information diffusion prediction. However, the diffusion paths of different messages naturally constitute a dynamic diffusion graph. For one thing, previous works cannot jointly utilize both the social network and diffusion graph for prediction, which is insufficient to model the complexity of the diffusion process and results in unsatisfactory prediction performance. For another, they cannot learn users' dynamic preferences. Intuitively, users' preferences are changing as time goes on and users' personal preference determines whether the user will repost the information. Thus, it is beneficial to consider users' dynamic preferences in information diffusion prediction. In this paper, we propose a novel dynamic heterogeneous graph convolutional network (DyHGCN) to jointly learn the structural characteristics of the social graph and dynamic diffusion graph. Then, we encode the temporal information into the heterogeneous graph to learn the users' dynamic preferences. Finally, we apply multi-head attention to capture the context-dependency of the current diffusion path to facilitate the information diffusion prediction task. Experimental results show that DyHGCN significantly outperforms the state-of-the-art models on three public datasets, which shows the effectiveness of the proposed model.

cs.SI↗

arXiv2020

ESA: Entity Summarization with Attention

Entity summarization aims at creating brief but informative descriptions of entities from knowledge graphs. While previous work mostly focused on traditional techniques such as clustering algorithms and graph models, we ask how to apply deep learning methods into this task. In this paper we propose ESA, a neural network with supervised attention mechanisms for entity summarization. Specifically, we calculate attention weights for facts in each entity, and rank facts to generate reliable summaries. We explore techniques to solve difficult learning problems presented by the ESA, and demonstrate the effectiveness of our model in comparison with the state-of-the-art methods. Experimental results show that our model improves the quality of the entity summaries in both F-measure and MAP.

cs.CL↗

arXiv2020

AutoSUM: Automating Feature Extraction and Multi-user Preference Simulation for Entity Summarization

Withthegrowthofknowledgegraphs, entity descriptions are becoming extremely lengthy. Entity summarization task, aiming to generate diverse, comprehensive, and representative summaries for entities, has received increasing interest recently. In most previous methods, features are usually extracted by the handcrafted templates. Then the feature selection and multi-user preference simulation take place, depending too much on human expertise. In this paper, a novel integration method called AutoSUM is proposed for automatic feature extraction and multi-user preference simulation to overcome the drawbacks of previous methods. There are two modules in AutoSUM: extractor and simulator. The extractor module operates automatic feature extraction based on a BiLSTM with a combined input representation including word embeddings and graph embeddings. Meanwhile, the simulator module automates multi-user preference simulation based on a well-designed two-phase attention mechanism (i.e., entity-phase attention and user-phase attention). Experimental results demonstrate that AutoSUM produces state-of-the-art performance on two widely used datasets (i.e., DBpedia and LinkedMDB) in both F-measure and MAP.

cs.IR↗

arXiv2020

Blind Quality Assessment for Image Superresolution Using Deep Two-Stream Convolutional Networks

Numerous image superresolution (SR) algorithms have been proposed for reconstructing high-resolution (HR) images from input images with lower spatial resolutions. However, effectively evaluating the perceptual quality of SR images remains a challenging research problem. In this paper, we propose a no-reference/blind deep neural network-based SR image quality assessor (DeepSRQ). To learn more discriminative feature representations of various distorted SR images, the proposed DeepSRQ is a two-stream convolutional network including two subcomponents for distorted structure and texture SR images. Different from traditional image distortions, the artifacts of SR images cause both image structure and texture quality degradation. Therefore, we choose the two-stream scheme that captures different properties of SR inputs instead of directly learning features from one image stream. Considering the human visual system (HVS) characteristics, the structure stream focuses on extracting features in structural degradations, while the texture stream focuses on the change in textural distributions. In addition, to augment the training data and ensure the category balance, we propose a stride-based adaptive cropping approach for further improvement. Experimental results on three publicly available SR image quality databases demonstrate the effectiveness and generalization ability of our proposed DeepSRQ method compared with state-of-the-art image quality assessment algorithms.

eess.IV↗

arXiv2020

Dense Residual Network for Retinal Vessel Segmentation

Retinal vessel segmentation plays an imaportant role in the field of retinal image analysis because changes in retinal vascular structure can aid in the diagnosis of diseases such as hypertension and diabetes. In recent research, numerous successful segmentation methods for fundus images have been proposed. But for other retinal imaging modalities, more research is needed to explore vascular extraction. In this work, we propose an efficient method to segment blood vessels in Scanning Laser Ophthalmoscopy (SLO) retinal images. Inspired by U-Net, "feature map reuse" and residual learning, we propose a deep dense residual network structure called DRNet. In DRNet, feature maps of previous blocks are adaptively aggregated into subsequent layers as input, which not only facilitates spatial reconstruction, but also learns more efficiently due to more stable gradients. Furthermore, we introduce DropBlock to alleviate the overfitting problem of the network. We train and test this model on the recent SLO public dataset. The results show that our method achieves the state-of-the-art performance even without data augmentation.

eess.IV↗

arXiv2020

The RWTH ASR System for TED-LIUM Release 2: Improving Hybrid HMM with SpecAugment

We present a complete training pipeline to build a state-of-the-art hybrid HMM-based ASR system on the 2nd release of the TED-LIUM corpus. Data augmentation using SpecAugment is successfully applied to improve performance on top of our best SAT model using i-vectors. By investigating the effect of different maskings, we achieve improvements from SpecAugment on hybrid HMM models without increasing model size and training time. A subsequent sMBR training is applied to fine-tune the final acoustic model, and both LSTM and Transformer language models are trained and evaluated. Our best system achieves a 5.6% WER on the test set, which outperforms the previous state-of-the-art by 27% relative.

eess.AS↗

arXiv2020

Full-Sum Decoding for Hybrid HMM based Speech Recognition using LSTM Language Model

In hybrid HMM based speech recognition, LSTM language models have been widely applied and achieved large improvements. The theoretical capability of modeling any unlimited context suggests that no recombination should be applied in decoding. This motivates to reconsider full summation over the HMM-state sequences instead of Viterbi approximation in decoding. We explore the potential gain from more accurate probabilities in terms of decision making and apply the full-sum decoding with a modified prefix-tree search framework. The proposed full-sum decoding is evaluated on both Switchboard and Librispeech corpora. Different models using CE and sMBR training criteria are used. Additionally, both MAP and confusion network decoding as approximated variants of general Bayes decision rule are evaluated. Consistent improvements over strong baselines are achieved in almost all cases without extra cost. We also discuss tuning effort, efficiency and some limitations of full-sum decoding.

eess.AS↗