arXiv subjects

Wei Ji

Publications and source records attributed to Wei Ji.

At least 271 records · Page 15Linked to original sources

arXiv2016

Probing Carrier Transport and Structure-property Relationship of Highly Ordered Organic Semiconductors at Two-dimensional Limit

One of the basic assumptions in organic field-effect transistors, the most fundamental device unit in organic electronics, is that charge transport occurs two-dimensionally in the first few molecular layers near the dielectric interface. Although the mobility of bulk organic semiconductors has increased dramatically, direct probing of intrinsic charge transport in the two-dimensional limit has not been possible due to excessive disorders and traps in ultrathin organic thin films. Here, highly ordered mono- to tetra-layer pentacene crystals are realized by van der Waals (vdW) epitaxy on hexagonal BN. We find that the charge transport is dominated by hopping in the first conductive layer, but transforms to band-like in subsequent layers. Such abrupt phase transition is attributed to strong modulation of the molecular packing by interfacial vdW interactions, as corroborated by quantitative structural characterization and density functional theory calculations. The structural modulation becomes negligible beyond the second conductive layer, leading to a mobility saturation thickness of only ~3nm. Highly ordered organic ultrathin films provide a platform for new physics and device structures (such as heterostructures and quantum wells) that are not possible in conventional bulk crystals.

cond-mat.mes-hall↗

arXiv2016

Interface coupling in twisted multilayer graphene by resonant Raman spectroscopy of layer breathing modes

Raman spectroscopy is the prime non-destructive characterization tool for graphene and related layered materials. The shear (C) and layer breathing modes (LBMs) are due to relative motions of the planes, either perpendicular or parallel to their normal. This allows one to directly probe the interlayer interactions in multilayer samples. Graphene and other two-dimensional (2d) crystals can be combined to form various hybrids and heterostructures, creating materials on demand with properties determined by the interlayer interaction. This is the case even for a single material, where multilayer stacks with different relative orientation have different optical and electronic properties. In twisted multilayer graphene samples there is a significant enhancement of the C modes due to resonance with new optically allowed electronic transitions, determined by the relative orientation of the layers. Here we show that this applies also to the LBMs, that can be now directly measured at room temperature. We find that twisting does not affect LBMs, quite different from the case of the C modes. This implies that the periodicity mismatch between two twisted layers mostly affects shear interactions. Our work shows that Raman spectroscopy is an ideal tool to uncover the interface coupling of 2d hybrids and heterostructures.

cond-mat.mtrl-sci↗

arXiv2015

Polytypism and Unexpected Strong Interlayer Coupling of two-Dimensional Layered ReS2

The anisotropic two-dimensional (2D) van der Waals (vdW) layered materials, with both scientific interest and potential application, have one more dimension to tune the properties than the isotropic 2D materials. The interlayer vdW coupling determines the properties of 2D multi-layer materials by varying stacking orders. As an important representative anisotropic 2D materials, multilayer rhenium disulfide (ReS2) was expected to be random stacking and lack of interlayer coupling. Here, we demonstrate two stable stacking orders (aa and a-b) of N layer (NL, N>1) ReS2 from ultralow-frequency and high-frequency Raman spectroscopy, photoluminescence spectroscopy and first-principles density functional theory calculation. Two interlayer shear modes are observed in aa-stacked NL-ReS2 while only one interlayer shear mode appears in a-b-stacked NL-ReS2, suggesting anisotropic-like and isotropic-like stacking orders in aa- and a-b-stacked NL-ReS2, respectively. The frequency of the interlayer shear and breathing modes reveals unexpected strong interlayer coupling in aa- and a-b-NL-ReS2, the force constants of which are 55-90% to those of multilayer MoS2. The observation of strong interlayer coupling and polytypism in multi-layer ReS2 stimulate future studies on the structure, electronic and optical properties of other 2D anisotropic materials.

cond-mat.mtrl-sci↗

arXiv2015

Interlayer electronic hybridization leads to exceptional thickness-dependent vibrational properties in few-layer black phosphorus

Stacking two-dimensional (2D) materials into multi-layers or heterostructures, known as van der Waals (vdW) epitaxy, is an essential degree of freedom for tuning their properties on demand. Few-layer black phosphorus (FLBP), a material with high potential for nano- and optoelectronics applications, appears to have interlayer couplings much stronger than graphene and other 2D systems. Indeed, these couplings call into question whether the stacking of FLBP can be governed only by vdW interactions, which is of crucial importance for epitaxy and property refinement. Here, we perform a theoretical investigation of the vibrational properties of FLBP, which reflect directly its interlayer coupling, by discussing six Raman-observable phonons, including three optical, one breathing, and two shear modes. With increasing sample thickness, we find anomalous redshifts of the frequencies for each optical mode but a blueshift for the armchair shear mode. Our calculations also show splitting of the phonon branches, due to anomalous surface phenomena, and strong phonon-phonon coupling. By computing uniaxial stress effects, inter-atomic force constants, and electron densities, we provide a compelling demonstration that these properties are the consequence of strong and highly directional interlayer interactions arising from electronic hybridization of the lone electron-pairs of FLBP, rather than from vdW interactions. This exceptional interlayer coupling mechanism controls the stacking stability of BP layers and thus opens a new avenue beyond vdW epitaxy for understanding the design of 2D heterostructures.

cond-mat.mtrl-sci↗

arXiv2014

Correlation of interfacial bonding mechanism and equilibrium conductance of molecular junctions

We report theoretical investigations on the role of interfacial bonding mechanism and its resulting structures to quantum transport in molecular wires. Two bonding mechanisms for the Au-S bond in an Au(111)/1,4-benzenedithiol(BDT)/Au(111) junction were identified by ab initio calculation, confirmed by a recent experiment, which, we showed, critically control charge conduction. It was found, for Au/ BDT/Au junctions, the hydrogen atom, bound by a dative bond to the Sulfur, is energetically non-dissociative after the interface formation. The calculated conductance and junction breakdown forces of H-non-dissociative Au/BDT/Au devices are consistent with the experimental values, while the H-dissociated devices, with the interface governed by typical covalent bonding, give conductance more than an order of magnitude larger. By examining the scattering states that traverse the junctions, we have revealed that mechanical and electric properties of a junction have strong correlation with the bonding configuration. This work clearly demonstrates that the interfacial details, rather than previously believed many-body effects, is of vital importance for correctly predicting equilibrium conductance of molecular junctions; and manifests that the interfacial contact must be carefully understood for investigating quantum transport properties of molecular nanoelectronics.

cond-mat.mes-hall↗

arXiv2014

High-mobility transport anisotropy and linear dichroism in few-layer black phosphorus

Two-dimensional crystals are emerging materials for nanoelectronics. Development of the field requires candidate systems with both a high carrier mobility and, in contrast to graphene, a sufficiently large electronic bandgap. Here we present a detailed theoretical investigation of the atomic and electronic structure of few-layer black phosphorus (BP) in order to predict its electrical and optical properties. This system has a direct bandgap, tunable from 1.51 eV for a monolayer to 0.59 eV for a 5-layer sample. We predict that the mobilities are hole-dominated, rather high and highly anisotropic. The monolayer is exceptional in having an extremely high hole-mobility (of order 10000 cm$^{2}$ V$^{-1}$ s$^{-1}$) and anomalous elastic properties which reverse the anisotropy. Light absorption spectra indicate linear dichroism between perpendicular in-plane directions, which allows optical determination of the crystalline orientation and optical activation of the anisotropic transport properties. These results make few-layer BP a promising candidate for future electronics.

cond-mat.mtrl-sci↗

arXiv2014

Role of the dispersion force in modeling the interfacial properties of molecule-metal interfaces: adsorption of thiophene on copper surfaces

We present density functional theory calculations of the geometry, adsorption energy and electronic structure of thiophene adsorbed on Cu(111), Cu(110) and Cu(100) surfaces. Our calculations employ dispersion corrections and self-consistent van der Waals density functionals (vdW-DFs). In terms of speed and accuracy, we find that the dispersion-energy-corrected Revised Perdue-Burke-Enzerhof (RPBE) functional is the "best balanced" method for predicting structural and energetic properties, while vdW-DF is also highly accurate if a proper exchange functional is used. Discrepancies between theory and experiment in molecular geometry can be solved by considering x-ray generated core-holes. However, the discrepancy concerning the adsorption site for thiophene/Cu(100) remains unresolved and requires both further experiments and deeper theoretical analysis. For all the interfaces, the PBE functional reveals a covalent bonding picture which the inclusion of dispersive contributions does not change to a vdW one. Our results provide a comprehensive understanding of the role of dispersive forces in modelling molecule-metal interfaces.

cond-mat.mtrl-sci↗

arXiv2014

Electrical contacts to monolayer black Phosphorus: a first principles investigation

We report first principles theoretical investigations of possible metal contacts to monolayer black phosphorus (BP). By analyzing lattice geometry, five metal surfaces are found to have minimal lattice mismatch with BP: Cu(111), Zn(0001), In(110), Ta(110) and Nb(110). Further studies indicate Ta and Nb bond strongly with monolayer BP causing substantial bond distortions, but the combined Ta-BP and Nb-BP form good metal surfaces to contact a second layer BP. By analyzing the geometry, bonding, electronic structure, charge transfer, potential and band bending, it is concluded that Cu(111) is the best candidate to form excellent Ohmic contact to monolayer BP. Other four metal surfaces or combined surfaces also provide viable structures to form metal/BP contacts, but they have Schottky character.

cond-mat.mes-hall↗

arXiv2013

Tuning Optical Conductivity of Large-Scale CVD Graphene by Strain Engineering

Strain engineering has been recently recognized as an effective way to tailor the electrical properties of graphene. In the optical domain, effects such as strain-induced anisotropic absorption add an appealing functionality to graphene, opening the prospect for atomically thin optical elements. Indeed, graphene is currently one of the notable players in the intense drive towards bendable, thin, and portable electronic displays, where its intrinsically metallic, optically transparent, and mechanically robust nature are major advantages. Given that the intrinsic transparency of a graphene monolayer is 97.7 %, any small, reproducible, controllable, and potentially reversible modulation of transparency can have a significant impact for graphene as a viable transparent conducting electrode. Even more so, if the degree of modulation is polarization dependent. Here we show that the transparency in the visible range of graphene pre-strained on a Polyethylene terephthalate (PET) substrate exhibits a periodic modulation (0.1 %) as a function of polarization direction, which we interpret as strain-induced optical anisotropy. The degree of anisotropy is varied by reversible external manipulation of the level of pre-strain. The magnitude of strain is monitored independently by optical absorption and Raman spectroscopy, and the experimental observations are consistent with the theoretically expected modification of the optical conductivity of graphene arising from the strain-induced changes in the electronic dispersion of graphene. The strain sensitivity of the optical response of graphene demonstrated in this study can be potentially utilized towards novel ultra-thin optical devices and strain sensing applications.

cond-mat.mes-hall↗

arXiv2013

Continuously tunable electronic structure of transition metal dichalcogenides superlattices

Two dimensional transition metal dichalcogenides (TMDC) have very interesting properties for optoelectronic devices. In this work we theoretically investigate and predict that superlattices comprised of MoS$_{2}$ and WSe$_{2}$ multilayers possess continuously tunable electronic structure having direct band gap. The tunability is controlled by the thickness ratio of MoS$_{2}$ versus WSe$_{2}$ of the superlattice. When this ratio goes from 1:2 to 5:1, the dominant K-K direct band gap is continuously tuned from 0.14 eV to 0.5 eV. The gap stays direct against -0.6% to 2% in-layer strain and up to -4.3% normal-layer compressive strain. The valance and conduction bands are spatially separated. These robust properties suggest that MoS$_{2}$ and WSe$_{2}$ multilayer superlattice should be an exciting emerging material for infrared optoelectronics.

cond-mat.mtrl-sci↗

arXiv2013

Graphene-enhanced, internal-magnetic-field-generated Rabi oscillations in metal-coated Si-SiO2 photoconductive detectors

We report our demonstration of Rabi oscillations in Si-SiO2-Al photoconductive devices with nanosecond laser pulses of a few nJ at room temperature without external magnetic fields. Zeeman splitting of spin quantum states of dopants in silicon is achieved with internal magnetic fields produced by the Al film under excitation of laser pulses. Rabi oscillation frequency is 15 MHz and 25 MHz when photocurrent direction is perpendicular and parallel, respectively, to the propagation direction of linearly-polarized, 532-nm, 7-ns laser pulses. Insertion of graphene buffer layer between Al and SiO2 provides a three-fold enhancement in Rabi oscillation amplitude. This simple-structured, low-cost device operated at room temperature should open a new avenue for future spin-based electronics and optoelectronics.

physics.optics↗

arXiv2012

Elastic Properties of Hybrid Graphene/Boron Nitride Monolayer

Recently hybridized monolayers consisting of hexagonal boron nitride (h-BN) phases inside graphene layer have been synthesized and shown to be an effective way of opening band gap in graphene monolayers [1]. In this letter, we report an ab initio density functional theory (DFT)- based study of h-BN domain size effect on the elastic properties of graphene/boron nitride hybrid monolayers (h-BNC). We found both inplane stiffness and longitudinal sound velocity of h-BNC linearly decrease with h-BN concentration.

cond-mat.mtrl-sci↗

arXiv2011

Molecular ordering of glycine on Cu(100): the p($2\times4$) superstructure

Glycine molecules deposited on Cu(100) surface give rise to an anisotropic free-electron-like (FEL) electronic dispersion in its p(2$\times$4) superstructure, as reported in recent experiments [Phys. Rev. Lett. {\bf 99}, 216102 (2007); J. Am. Chem. Soc. {\bf 129}, 740 (2007)]. Using density functional theory and exhaustively calculating sixteen possible structures, we have determined the molecular arrangement that can give the experimentally observed FEL behavior. Eight configurations, among the sixteen, were not investigated before in the literature and one of them (denoted Str-3) is able to provide the FEL behavior in excellent agreement with the experiments. In addition, the particular configuration Str-3 satisfies other criteria of the observed p(2$\times$4) superstructure, e.g. chirality and cleavable orientation.

cond-mat.mtrl-sci↗

arXiv2011

Creating and modulating electronic states on noble metal surfaces: ultrathin Ag islands on Si(111)-7$\times$7 as a prototype

Various-thickness Ag islands were prepared on Si(111)-7$\times$7 using the one-step deposition at a high substrate temperature. An electronic state centered at -0.40$\sim$-0.15eV versus E$_{Fermi}$, detectable on the surface of the Ag islands thinner than 9 layers, was created by the electronic hybridization between Ag and Si at the Ag-Si interface. Scanning tunneling microscopy/spectroscopy and density functional theory revealed that the thickness of Ag islands determined the strength of the hybridization, leading to a modulation to the energy and intensity of the state on the surface.

cond-mat.mtrl-sci↗

arXiv2010

Graphene spintronics: the role of ferromagnetic electrodes

We report a first principles study of spin-transport under finite bias through a graphene-ferromagnet (FM) interface, where FM=Co(111), Ni(111). The use of Co and Ni electrodes achieves spin efficiencies reaching 80% and 60%, respectively. This large spin filtering results from the materials specific interaction between graphene and the FM which destroys the linear dispersion relation of the graphene bands and leads to an opening of spin-dependent energy gaps of roughly 0.4-0.5 eV at the K points. The minority spin band gap resides higher in energy than the majority spin band gap located near the Fermi level, a feature that results in large minority spin dominated currents.

cond-mat.mes-hall↗

arXiv2010

First principles study of electronic transport through a Cu(111)|graphene junction

We report first principles investigations of the nonequilibrium transport properties of a Cu(111)|graphene interface. The Cu(111) electrode is found to induce a transmission minimum (TM) located -0.68eV below the Fermi level, a feature originating from the Cu-induced charge transfer resulting in n-type doped graphene with the Dirac point coinciding with the TM. An applied bias voltage shifts the n-graphene TM relative to the pure graphene TM and leads to a distinctive peak in the differential conductance indicating the doping level, a characteristic not observed in pure graphene.

cond-mat.mes-hall↗

arXiv2010

Pressure- and temperature-induced structural phase transitions of CaFe$_2$As$_2$ and BaFe$_2$As$_2$ studied in the Hund's rule correlation picture

With the proposed Hund's rule correlation picture, i.e. the fluctuating Fe local moments with the As-bridged antiferromagnetic superexchange interactions, the exceptional collapsed tetragonal phase and related phase transitions observed in CaFe$_2$As$_2$ are well understood. With the same framework, a pressure-temperature phase diagram is predicted for BaFe$_2$As$_2$ as well, in which a paramagnetic tetragonal and a collinear antiferromagnetic orthorhombic structures to nonmagnetic tetragonal structure transitions take place around 4-8 GPa and 10-15 GPa respectively, and a nonmagnetic tetragonal to a nonmagnetic collapsed tetragonal structure transition takes place over 26 GPa. Our study helps better understand the complex correlation among crystal structure, magnetism, and electronic structure in pnictides, a precondition to understand the superconductivity in pnictides.

cond-mat.mtrl-sci↗

arXiv2008

Bi-collinear antiferromagnetic order in the tetragonal $α$-FeTe

By the first-principles electronic structure calculations, we find that the ground state of PbO-type tetragonal $α$-FeTe is in a bi-collinear antiferromagnetic state, in which the Fe local moments ($\sim2.5μ_B$) are ordered ferromagnetically along a diagonal direction and antiferromagnetically along the other diagonal direction on the Fe square lattice. This bi-collinear order results from the interplay among the nearest, next nearest, and next next nearest neighbor superexchange interactions $J_1$, $J_2$, and $J_3$, mediated by Te $5p$-band. In contrast, the ground state of $α$-FeSe is in the collinear antiferromagnetic order, similar as in LaFeAsO and BaFe$_2$As$_2$.

cond-mat.mtrl-sci↗