arXiv subjects

Warwick P. Bowen

Publications and source records attributed to Warwick P. Bowen.

At least 19 recordsLinked to original sources

arXiv2026

Practical Limits on Integrated Squeezers

Recent experiments have demonstrated the successful generation and detection of moderately squeezed vacuum states with integrated photonics. However, in order to benefit from the reduced noise of highly squeezed light, many different noise sources must be mitigated. Here, we quantify the fundamental limits these noise sources impose on squeezing measurements and find surprising generality across different platforms and designs. We combine these different limitations into a simple model that provides practical guidance for the design and benchmarking of next-generation integrated squeezed-light systems.

quant-ph↗

arXiv2026

Structured detection microscopy

Super-resolution microscopy is crucial for imaging sub-wavelength biological structures. However, most techniques rely on nonlinear saturation or stochastic switching of emitters, limiting imaging speed and increasing phototoxicity. Here, we achieve deep super-resolution without employing saturation or stochastic dynamics, instead using a form of spatial mode demultiplexing. By shaping the point-spread function of the emitted light, our Structured Detection Microscope (SDM) redistributes information away from high shot-noise regions of the image, enhancing sensitivity to sub-diffraction emitter separations in two-dimensions and without mode-sorting optics. Implementing SDM within a high-numerical aperture total internal reflection fluorescence microscope, we demonstrate imaging of fluorophores attached to DNA nanorulers with separations as small as 50 nm at resolutions surpassing 40 nm - fivefold below the diffraction limit. This shows that spatial mode demultiplexing can achieve far sub-wavelength resolution and is applicable to biologically relevant samples. By enabling super-resolution biomolecular imaging without emitter saturation and stochasticity, our work opens the door to better understanding biological structure, function and dynamics.

physics.optics↗

arXiv2026

Ultrawide Bandwidth Optomechanical Magnetometry Using Flux Concentration

Low-frequency magnetic fields carry vital information for neuroscience, navigation, and Earth science. However, they are generally weak, making it challenging to measure them with compact, room-temperature magnetometers. To overcome this challenge, we combine an on-chip optomechanical magnetometer with a high-permeability flux concentrator. Beyond boosting sensitivity and bandwidth, exploiting the concentrator's nonlinear response converts low-frequency magnetic fluctuations into higher-frequency signals where the sensor is intrinsically most responsive. This sidesteps the technical noise that has long constrained the application of optomechanical magnetometry at low frequencies. Our measurements show order-of-magnitude improvements in sensitivity and extend performance into the sub-hertz regime, achieving below 20 nT Hz$^{-1/2}$ down to 3 Hz and less than 100 nT Hz$^{-1/2}$ at 0.1 Hz. Because this approach requires no redesign of the underlying architecture, it can be readily applied across magnetometer technologies, opening the way to practical low-frequency sensing for applications from brain activity mapping to undersea navigation and biomedical diagnostics.

physics.optics↗

arXiv2026

Solitary waves in a phononic integrated circuit

Solitons are universal nonlinear excitations that appear in settings as varied as optics, water waves, and quantum gases [1-5]. While reduced models of soliton dynamics are well established, their validity and dynamical behaviour in strongly nonlinear regimes with frequent interactions remain largely unexplored experimentally. Progress has been constrained by the difficulty of simultaneously achieving precise control of dispersion and nonlinearity, together with the temporal and spatial resolution required for dynamical observations. Here we overcome these difficulties by producing acoustic solitons in integrated phononic waveguides. We exploit the interplay between waveguide dispersion and mechanical Kerr nonlinearity to generate 'dark' solitons that persist over metre-scale propagation distances. The slow phonon velocity allows direct imaging of hundreds of dark soliton collisions -- two orders of magnitude more than have previously been accessible [6, 7] -- as well as soliton fission and the melting of a soliton Wigner crystal. Furthermore, the unprecedented dynamical resolution allows us to verify two long-predicted aspects of dark soliton behaviour: the existence of a collisional phase shift and two depth-dependent collision regimes [8, 9]. These results not only illuminate fundamental nonlinear energy transport processes, but also show a path towards acoustic versions of soliton-enabled technologies such as frequency combs and mode-locked lasers [1, 2, 10].

cond-mat.mes-hall↗

arXiv2025

Mechanically mediated optical-microwave quantum state transfer by feedback

State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness $\mathcal{W}_T$, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.

quant-ph↗

arXiv2025

Silicon-photonic optomechanical magnetometer

Optomechanical sensors enable exquisitely sensitive force measurements, with emerging applications across quantum technologies, standards, fundamental science, and engineering. Magnetometry is among the most promising applications, where chip-scale optomechanical sensors offer high sensitivity without the cryogenics or magnetic shielding required by competing technologies. However, lack of compatibility with integrated photonics and electronics has posed a major barrier. Here we introduce silicon-on-insulator optomechanical magnetometers to address this barrier. A new post-release lithography process enables high-quality metallisation of released mechanical structures, overcoming the incompatibility between silicon-on-insulator fabrication and functional magnetic films. This allows us to employ photonic-crystal cavities that enhance motion-to-optical signal transduction by over an order of magnitude. The resulting devices achieve magnetic field sensitivity of 800 pT Hz^-1/2, three orders of magnitude beyond previous waveguide-integrated designs. The advances we report provide a path towards high-performance, room temperature and chip-integrated magnetometers for applications ranging from biomedical imaging and navigation to resource exploration.

physics.optics↗

arXiv2025

Post-processed estimation of quantum state trajectories

Weak quantum measurements enable real-time tracking and control of dynamical quantum systems, producing quantum trajectories -- evolutions of the quantum state of the system conditioned on measurement outcomes. For classical systems, the accuracy of trajectories can be improved by incorporating future information, a procedure known as smoothing. Here we apply this concept to quantum systems, generalising a formalism of quantum state smoothing for an observer monitoring a quantum system exposed to environmental decoherence, a scenario important for many quantum information protocols. This allows future data to be incorporated when reconstructing the trajectories of quantum states. We experimentally demonstrate that smoothing improves accuracy using a continuously measured nanomechanical resonator, showing that the method compensates for both gaps in the measurement record and inaccessible environments. We further observe a key predicted departure from classical smoothing: quantum noise renders the trajectories nondifferentiable. These results establish that future information can enhance quantum trajectory reconstruction, with potential applications across quantum sensing, control, and error correction.

quant-ph↗

arXiv2025

Nanomechanical Error Correction

Error correction is essential for modern computing systems, enabling information to be processed accurately even in the presence of noise. Here, we demonstrate a new approach which exploits an error correcting phase that emerges in a system of three coupled nonlinear resonators. Within this phase, perturbed memory states are autonomously restored via the collective dynamics of the nonlinear network. We implement our scheme using a network of nanomechanical resonators. Nanomechanical systems are an attractive platform for low energy computing, but purely mechanical error correction has not been previously demonstrated. We experimentally show that the error correcting phase provides a 35 times reduction in the rate of errors, and allows robust error correction over a wide range of system parameters. These results highlight how emergent nonlinear dynamics can be harnessed for practical applications, paving the way towards error-resilient nanomechanical computing.

physics.app-ph↗

arXiv2025

Membrane phononic integrated circuits

Phononic circuits constructed from high tensile stress membranes offer a range of desirable features such as high acoustic confinement, controllable nonlinearities, low mass, compact footprint, and ease of fabrication. This tutorial presents a systematic approach to modelling and designing phononic integrated circuits on this platform, beginning with acoustic confinement, wave propagation and dispersion, mechanical and actuation nonlinearities, as well as resonator dynamics. By adapting coupled mode theory from optoelectronics to suspended membranes, and validating this theory with several numerical techniques (finite element modelling, finite difference time domain simulations, and the transfer matrix method), we then provide a comprehensive framework to engineer a broad variety of phononic circuit building blocks. As illustrative examples, we describe the implementation of several acoustic circuit elements including resonant and non-resonant variable-ratio power splitters, mode converters, mode (de)multiplexers, and in-line Fabry-Perot cavities based on evanescent tunnel barriers. These building blocks lay the foundation for phononic integrated circuits with applications in sensing, acoustic signal processing, and power-efficient and radiation-hard computing.

physics.app-ph↗

arXiv2025

Precision optomechanical accelerometer via hybrid test mass integration

Accelerometers offer motion sensing capabilities across a wide range of areas, enabling navigational awareness in consumer goods and defense applications, and playing a key role in monitoring and control systems. To date, on-chip accelerometers have largely utilized a single device layer or substrate as a test mass. This constrains the test mass to the dimensions and density of the device layer or substrate, ultimately limiting the sensitivity of the device. We demonstrate a new approach which utilizes a pick-and-place bonding technique to increase the test mass of an on-chip accelerometer. By bonding a high-density platinum sphere to a nanomechanical silicon nitride trampoline membrane, we achieve a quality factor of 1900 in air with 95 mg test mass, corresponding to a thermomechanical noise limited acceleration sensitivity of $0.8\,\mathrm{n}g/\sqrt{\mathrm{Hz}}$. We optically probe the device's response to applied accelerations with increasing level of acoustic and vibration isolation, measuring a peak sensitivity of $5.5\,\mathrm{n}g/\sqrt{\mathrm{Hz}}$ at 117 Hz in air, limited by environmental vibrations. This represents the best peak sensitivity reported using a chip-integrated test mass.

physics.app-ph↗

arXiv2025

Label-free microscope for rheological imaging of cells

Many essential cellular functions depend on the viscoelastic properties of the cytoplasm. While techniques such as optical tweezers and atomic force microscopy can measure these properties, their reliance on localized probes prevents intracellular imaging and perturbs native cellular behaviour. Label-free microscopy offers non-invasive alternatives that are capable of imaging. However, bandwidth limitations often confine these techniques to the assessment of static mechanical properties or to measurements at gigahertz frequencies, which both lie outside the interesting frequency range typically associated with cellular viscoelasticity. Here, we introduce a label-free microscope capable of imaging the viscoelastic properties of cells at frequencies relevant to biology. The microscope measures intracellular viscoelasticity -- twenty times faster than previous label-free approaches -- and does this with diffraction limited resolution. The measurements reveal characteristic viscoelastic features that were previously inaccessible, allowing quantitative rheology of the cellular cytoskeleton. We apply the microscope to live cancer cells. The rheological images produced identify spatial variations in cellular mechanics, allow active and thermal processes to be distinguished pixel-by-pixel, and enable the state of the cell to be visualised over time and in the presence of stress. The microscope is also able to resolve cellular structures that are invisible to regular phase-sensitive imaging, and do this with high contrast. The ability to image both intracellular viscoelasticity and activity offers a powerful tool to advance fundamental cell biology, cancer research, clinical diagnostics, and drug development.

physics.bio-ph↗

arXiv2025

Large speed-up of quantum emitter detection via quantum interference

Quantum emitters are a key resource in quantum technologies, microscopy, and other applications. The ability to rapidly detect them is useful both for quality control in engineered emitter arrays and for high-contrast imaging of naturally occurring emitters. Using full photon-counting statistics and optimal Bayesian hypothesis testing, we show that extended Hong-Ou-Mandel interference between quantum emission and a coherent field enables orders-of-magnitude speed-ups in emitter detection under realistic noise and loss. Strikingly, the performance advantage improves as loss and background noise increase, and persists for incoherent emission. Taken together with prior demonstrations of extended Hong-Ou-Mandel interference, this suggest that substantial performance gains are achievable with current technology under realistic, non-ideal conditions. This offers a new approach to fast, low-intensity imaging and for emitter characterization in large-scale quantum systems. Fundamentally, the discovery that quantum interference and measurements, used together, are more robust to both loss and noise than standard measurement techniques opens the possibility of broad applications across quantum metrology.

quant-ph↗

arXiv2025

Nonlinear wave dynamics on a chip

Shallow water waves are a striking example of nonlinear hydrodynamics, giving rise to phenomena such as tsunamis and undular waves. These dynamics are typically studied in hundreds-of-meter-long wave flumes. Here, we demonstrate a chip-scale, quantum-enabled wave flume. The wave flume exploits nanometer-thick superfluid helium films and optomechanical interactions to achieve nonlinearities surpassing those of extreme terrestrial flows. Measurements reveal wave steepening, shock fronts, and soliton fission -- nonlinear behaviors long predicted in superfluid helium but never previously directly observed. Our approach enables lithography-defined wave flume geometries, optomechanical control of hydrodynamic properties, and orders of magnitude faster measurements than terrestrial flumes. Together, this opens a new frontier in hydrodynamics, combining quantum fluids and nanophotonics to explore complex wave dynamics at microscale.

physics.flu-dyn↗

arXiv2025

Fibre-coupled photonic crystal hydrophone

Many applications, including medical diagnostics, sonar and navigation rely on the detection of acoustic waves. Photonic hydrophones demonstrate comparable sensitivity to piezoelectric-based hydrophones, but with significantly reduced size, weight and power requirements. In this paper we demonstrate a micron-sized free-standing silicon photonic hydrophone. We demonstrate sensitivity on the order of $\sim$mPa/$\sqrt{\textrm{Hz}}$ from 10-200 kHz, with a minimum detectable pressure of 145 $\mu$Pa/$\sqrt{\textrm{Hz}}$ at 22 kHz. We also deployed our hydrophone in a wave flume to evaluate its suitability for underwater measurement and communication. Our hydrophone matches the sensitivity of commercial hydrophones, but is many orders of magnitude smaller in volume, which could enable high spatial resolution imaging of micron-sized acoustic features (i.e., living cell vibrations). Our hydrophone could also be used in underwater communication and imaging applications.

physics.optics↗

arXiv2024

Advances in quantum imaging

Modern imaging technologies are widely based on classical principles of light or electromagnetic wave propagation. They can be remarkably sophisticated, with recent successes ranging from single molecule microscopy to imaging far-distant galaxies. However, new imaging technologies based on quantum principles are gradually emerging. They can either surpass classical approaches or provide novel imaging capabilities that would not otherwise be possible. {Here }we provide an overview {of the most recently developed quantum imaging systems, highlighting the non-classical properties of sources such as bright squeezed light, entangled photons, and single-photon emitters that enable their functionality.} We outline potential upcoming trends and the associated challenges, all driven by a central inquiry, which is to understand whether quantum light can make visible the invisible.

quant-ph↗

arXiv2024

Silicon Double-Disk Optomechanical Resonators from Wafer-Scale Double-Layered Silicon-on-Insulator

Whispering gallery mode (WGM) optomechanical resonators are a promising technology for the simultaneous control and measurement of optical and mechanical degrees of freedom at the nanoscale. They offer potential for use across a wide range of applications such as sensors and quantum transducers. Double-disk WGM resonators, which host strongly interacting mechanical and optical modes co-localized around their circumference, are particularly attractive due to their high optomechanical coupling. Large-scale integrated fabrication of silicon double-disk WGM resonators has not previously been demonstrated. In this work we present a process for the fabrication of double-layer silicon-on-insulator wafers, which we then use to fabricate functional optomechanical double silicon disk resonators with on-chip optical coupling. The integrated devices present an experimentally observed optical quality factors of the order of 10^5 and a single-photon optomechanical coupling of approximately 15 kHz.

physics.optics↗

arXiv2024

Low-Dissipation Nanomechanical Devices from Monocrystalline Silicon Carbide

The applications of nanomechanical resonators range from biomolecule mass sensing to hybrid quantum interfaces. Their performance is often limited by internal material damping, which can be greatly reduced by using crystalline materials. Crystalline silicon carbide is appealing due to its exquisite mechanical, electrical and optical properties, but has suffered from high internal damping due to material defects. Here we resolve this by developing nanomechanical resonators fabricated from bulk monocrystalline 4H-silicon carbide. This allows us to achieve damping as low as 2.7 mHz, more than an order-of-magnitude lower than any previous crystalline silicon carbide resonator and corresponding to a quality factor as high as 20 million at room temperature. The volumetric dissipation of our devices reaches the material limit for silicon carbide for the first time. This provides a path to greatly increase the performance of silicon carbide nanomechanical resonators.

cond-mat.mes-hall↗

arXiv2024

Enhancement of mechanical squeezing via feedback control

We explore the generation of nonclassical mechanical states by combining continuous position measurement and feedback control. We find that feedback-induced spring softening can greatly enhance position squeezing. Conversely, even with a pure position measurement, we find that spring hardening can enable momentum squeezing. Beyond enhanced squeezing, we show that feedback also mitigates degradation introduced by background mechanical modes. Together, this significantly lowers the barrier to measurement-based preparation of nonclassical mechanical states at room temperature.

quant-ph↗