arXiv subjects

Wael Jaafar

Publications and source records attributed to Wael Jaafar.

At least 37 records · Page 2Linked to original sources

arXiv2023

FLSTRA: Federated Learning in Stratosphere

We propose a federated learning (FL) in stratosphere (FLSTRA) system, where a high altitude platform station (HAPS) facilitates a large number of terrestrial clients to collaboratively learn a global model without sharing the training data. FLSTRA overcomes the challenges faced by FL in terrestrial networks, such as slow convergence and high communication delay due to limited client participation and multi-hop communications. HAPS leverages its altitude and size to allow the participation of more clients with line-of-sight (LOS) links and the placement of a powerful server. However, handling many clients at once introduces computing and transmission delays. Thus, we aim to obtain a delay-accuracy trade-off for FLSTRA. Specifically, we first develop a joint client selection and resource allocation algorithm for uplink and downlink to minimize the FL delay subject to the energy and quality-of-service (QoS) constraints. Second, we propose a communication and computation resource-aware (CCRA-FL) algorithm to achieve the target FL accuracy while deriving an upper bound for its convergence rate. The formulated problem is non-convex; thus, we propose an iterative algorithm to solve it. Simulation results demonstrate the effectiveness of the proposed FLSTRA system, compared to terrestrial benchmarks, in terms of FL delay and accuracy.

cs.NI↗

arXiv2023

Sustaining Dynamic Traffic in Dense Urban Areas with High Altitude Platform Stations (HAPS)

The impact of information and communication technologies on global energy consumption is increasing every year, and mobile networks account for a significant portion of it. More than 50% of the total energy consumption of mobile networks is issued from radio access networks (RANs), due mainly to the rapid penetration of data-intensive applications and the increasing heterogeneity, dynamicity, and unpredictability of traffic. To tackle these high-demanding problems, RAN densification through the installation of additional base stations in high-demand areas is conventionally used. However, this leads to inefficient energy use and over-provisioning issues. In this context, high altitude platform stations (HAPS) may be used to complement RANs and sustain their services in densely populated areas, where traffic can peak unpredictably. Due to their wide coverage areas, substantial communication payloads, and green energy model, HAPS super macro base stations (SMBSs) are capable of handling the massive and dynamic mobile data traffic of ground users. In this paper, we show how HAPS-SMBSs can complement RANs and serve the dynamic and unpredictable traffic demands of users in an energy-efficient manner. Through the simulation of a case study, we demonstrate the performance of a HAPS-SMBS compared to the conventional RAN densification method and analyze the two approaches in terms of sustainability.

cs.NI↗

arXiv2022

On the Design of Communication-Efficient Federated Learning for Health Monitoring

With the booming deployment of Internet of Things, health monitoring applications have gradually prospered. Within the recent COVID-19 pandemic situation, interest in permanent remote health monitoring solutions has raised, targeting to reduce contact and preserve the limited medical resources. Among the technological methods to realize efficient remote health monitoring, federated learning (FL) has drawn particular attention due to its robustness in preserving data privacy. However, FL can yield to high communication costs, due to frequent transmissions between the FL server and clients. To tackle this problem, we propose in this paper a communication-efficient federated learning (CEFL) framework that involves clients clustering and transfer learning. First, we propose to group clients through the calculation of similarity factors, based on the neural networks characteristics. Then, a representative client in each cluster is selected to be the leader of the cluster. Differently from the conventional FL, our method performs FL training only among the cluster leaders. Subsequently, transfer learning is adopted by the leader to update its cluster members with the trained FL model. Finally, each member fine-tunes the received model with its own data. To further reduce the communication costs, we opt for a partial-layer FL aggregation approach. This method suggests partially updating the neural network model rather than fully. Through experiments, we show that CEFL can save up to to 98.45% in communication costs while conceding less than 3% in accuracy loss, when compared to the conventional FL. Finally, CEFL demonstrates a high accuracy for clients with small or unbalanced datasets.

cs.LG↗

arXiv2022

iTUAVs: Intermittently Tethered UAVs for Future Wireless Networks

We propose the intermittently tethered unmanned aerial vehicle (iTUAV) as a tradeoff between the power availability of a tethered UAV (TUAV) and the flexibility of an untethered UAV. An iTUAV can provide cellular connectivity while being temporarily tethered to the most adequate ground anchor. Also, it can flexibly detach from one anchor, travel, then attach to another one to maintain/improve the coverage quality for mobile users. Hence, we discuss here the existing UAV-based cellular networking technologies, followed by a detailed description of the iTUAV system, its components, and mode of operation. Subsequently, we present a comparative study of the existing and proposed systems highlighting the differences in key features such as mobility and energy. To emphasize the potential of iTUAV systems, we conduct a case study, evaluate the iTUAV performance, and compare it to benchmarks. Obtained results show that with only 10 anchors in the area, the iTUAV system can serve up to 90% of the users covered by the untethered UAV swapping system. Moreover, results from a small case study prove that the iTUAV allows to balance performance/cost and can be implemented realistically. For instance, when user locations are clustered, with only 2 active iTUAVs and 4 anchors, achieved performance is superior to that of the system with 3 TUAVs, while when considering a single UAV on a 100 minutes event, a system with only 6 anchors outperforms the untethered UAV as it combines location flexibility with increased mission time.

cs.NI↗

arXiv2022

HAPS-ITS: Enabling Future ITS Services in Trans-Continental Highways

With the advent of rapid globalization and the inter-border supply chain network, the reliability and efficiency of transportation systems have become even more critical. Indeed, trans-continental highways need particular attention due to their important role in sustaining globalization. In this context, intelligent transportation systems (ITS) can actively enhance the safety, mobility, productivity, and comfort of trans-continental highways. However, ITS efficiency depends greatly on the roads where they are deployed, on the availability of power and connectivity, and on the integration of future connected and autonomous vehicles. To this end, high altitude platform station (HAPS) systems, due to their mobility, sustainability, payload capacity, and communication/caching/computing capabilities, are seen as a key enabler of future ITS services for trans-continental highways; this paradigm is referred to as HAPS-ITS. The latter is envisioned as an active component of ITS systems to support a plethora of transportation applications, such as traffic monitoring, accident reporting, and platooning. This paper discusses how HAPS systems can enable advanced ITS services for trans-continental highways, presenting the main requirements of HAPS-ITS and a detailed case study of the Trans-Sahara highway.

eess.SY↗

arXiv2021

UAV-based Crowd Surveillance in Post COVID-19 Era

To cope with the current pandemic situation and reinstate pseudo-normal daily life, several measures have been deployed and maintained, such as mask wearing, social distancing, hands sanitizing, etc. Since outdoor cultural events, concerts, and picnics, are gradually allowed, a close monitoring of the crowd activity is needed to avoid undesired contact and disease transmission. In this context, intelligent unmanned aerial vehicles (UAVs) can be occasionally deployed to ensure the surveillance of these activities, that health restriction measures are applied, and to trigger alerts when the latter are not respected. Consequently, we propose in this paper a complete UAV framework for intelligent monitoring of post COVID-19 outdoor activities. Specifically, we propose a three steps approach. In the first step, captured images by a UAV are analyzed using machine learning to detect and locate individuals. The second step consists of a novel coordinates mapping approach to evaluate distances among individuals, then cluster them, while the third step provides an energy-efficient and/or reliable UAV trajectory to inspect clusters for restrictions violation such as mask wearing. Obtained results provide the following insights: 1) Efficient detection of individuals depends on the angle from which the image was captured, 2) coordinates mapping is very sensitive to the estimation error in individuals' bounding boxes, and 3) UAV trajectory design algorithm 2-Opt is recommended for practical real-time deployments due to its low-complexity and near-optimal performance.

cs.CV↗

arXiv2021

Optimization of Quantized Phase Shifts for Reconfigurable Smart Surfaces Assisted Communications

Reconfigurable Smart Surface (RSS) is assumed to be a key enabler for future wireless communication systems due to its ability to control the wireless propagation environment and, thus, enhance communications quality. Although optimal and continuous phase-shift configuration can be analytically obtained, practical RSS systems are prone to both channel estimation errors, discrete control, and curse of dimensionality. This leads to relaying on a finite number of phase-shift configurations that is expected to degrade the system's performances. In this paper, we tackle the problem of quantized RSS phase-shift configuration, aiming to maximize the data rate of an orthogonal frequency division multiplexing (OFDM) point-to-point RSS-assisted communication. Due to the complexity of optimally solving the formulated problem, we propose here a sub-optimal greedy algorithm to solve it. Simulation results illustrate the performance superiority of the proposed algorithm compared to baseline approaches. Finally, the impact of several parameters ,e.g., quantization resolution and RSS placement, is investigated.

eess.SP↗

arXiv2021

Link Budget Analysis for Reconfigurable Smart Surfaces in Aerial Platforms

Non-terrestrial networks, including Unmanned Aerial Vehicles (UAVs), High Altitude Platform Station (HAPS) and Low Earth Orbiting (LEO) satellites, are expected to have a pivotal role in the sixth generation wireless networks. With their inherent features such as flexible placement, wide footprint, and preferred channel conditions, they can tackle several challenges in current terrestrial networks However, their successful and widespread adoption relies on energy-efficient on-board communication systems. In this context, the integration of Reconfigurable Smart Surfaces (RSS) into aerial platforms is envisioned as a key enabler of energy-efficient and cost-effective deployments of aerial platforms. Indeed, RSS consist of low-cost reflectors capable of smartly directing signals in a nearly passive way. We investigate in this paper the link budget of RSS-assisted communications under the two discussed RSS reflection paradigms in the literature, namely the specular and the scattering reflection paradigm types. Specifically, we analyze the characteristics of RSS-equipped aerial platforms and compare their communication performance with that of RSS-assisted terrestrial networks, using standardized channel models. In addition, we derive the optimal aerial platforms placements under both reflection paradigms. The obtained results provide important insights for the design of RSS-assisted communications. For instance, given that a HAPS has a large RSS surface, it provides superior link budget performance in most studied scenarios. In contrast, the limited RSS area on UAVs and the large propagation loss in LEO satellite communications make them unfavorable candidates for supporting terrestrial users. Finally, the optimal location of the RSS-equipped platform may depend on the platform's altitude, coverage footprint, and type of environment.

eess.SP↗

arXiv2021

Disconnectivity-Aware Energy-Efficient Cargo-UAV Trajectory Planning with Minimum Handoffs

On-board battery consumption, cellular disconnectivity, and frequent handoff are key challenges for unmanned aerial vehicle (UAV) based delivery missions, a.k.a., cargo-UAV. Indeed, with the introduction of UAV technology into cargo shipping and logistics, designing energy-efficient paths becomes a serious issue for the next retail industry transformation. Typically, the latter has to guarantee uninterrupted or slightly interrupted cellular connectivity for the UAV's command and control through a small number of handoffs. In this paper, we formulate the trajectory planning as a multi-objective problem aiming to minimize both the UAV's energy consumption and the handoff rate, constrained by the UAV battery size and disconnectivity rate. Due to the problem's complexity, we propose a dynamic programming based solution. Through simulations, we demonstrate the efficiency of our approach in providing optimized UAV trajectories. Also, the impact of several parameters, such as the cargo-UAV altitude, disconnectivity rate, and type of environment, are investigated. The obtained results allow to draw recommendations and guidelines for cargo-UAV operations.

eess.SY↗

arXiv2021

3D Aerial Highway: The Key Enabler of the Retail Industry Transformation

The retail industry is already facing an inevitable transformation worldwide, and with the current pandemic situation, it is even accelerating. Indeed, consumer habits are shifting from brick-and-mortar stores to online shopping. The bottleneck in the end-to-end online shopping experience remains the efficient and quick delivery of goods to consumers. In this context, unmanned aerial vehicle (UAV) technology is seen as a potential solution to address cargo delivery issues. Hence, the number of cargo-UAVs is expected to skyrocket in the next few decades and the airspace to become densely crowded. To successfully deploy UAVs for mass cargo delivery, seamless and reliable cellular connectivity for highly mobile UAVs is required. There is an urgent need for organized and connected routes in the sky. Like highways for cargo trucks, 3D routes in the airspace should be designed for cargo-UAVs to fulfill their operations safely and efficiently. We refer to these routes as 3D aerial highway. In this paper, we thoroughly investigate the feasibility of the aerial highways paradigm. First, we discuss the motivations and concerns of the aerial highway paradigm. Then, we present our vision of the 3D aerial highway framework. Finally, we present related connectivity issues and their potential solutions.

eess.SP↗

arXiv2020

Dynamics of Laser-Charged UAVs: A Battery Perspective

In this paper, we aim to sustain unmanned aerial vehicle (UAV) based missions for longer periods of times through different techniques. First, we consider on-the-mission UAV recharging by a low-power laser source (below 1 kilowatt). In order to achieve the maximal energy gain from the low-power laser source, we propose an operational compromise, which consists of the UAV resting over buildings with cleared line-of-sight to the laser source. Second, to provide a precise energy consumption/harvesting estimation at the UAV, we investigate the latter's dynamics in a mission environment. Indeed, we study the UAV's battery dynamics by leveraging the electrical models for motors and battery. Subsequently, using these models, the path planning problem in a particular Internet-of-Things based use-case is revisited from the battery perspective. The objective is to extend the UAV's operation time using both laser-charging and accurate battery level estimation. Through a graph theory approach, the problem is solved optimally, and compared to benchmark trajectory approaches. Numerical results demonstrate the efficiency of this novel battery perspective for all path planning approaches. In contrast, we found that the energy perspective is very conservative and does not exploit optimally the available energy resources. Nevertheless, we propose a simple adjustment method to correct the energy perspective, by carefully evaluating the energy as a function of the UAV motion regimes. Finally, the impact of several parameters, such as turbulence and distance to charging source, is studied.

eess.SP↗

arXiv2020

On the Downlink Performance of RSMA-based UAV Communications

The use of unmanned aerial vehicles (UAVs) as base stations (BSs) is envisaged as a key enabler for the fifth generation (5G) and beyond-5G networks. Specifically, aerial base stations (UAV-BS) are expected to provide ubiquitous connectivity and high spectral efficiency. To this end, we present in this correspondence an in-depth look into the integration of rate-splitting multiple access (RSMA) with UAV-BSs and downlink transmissions. A non-convex problem of joint UAV placement, RSMA precoding, and rate splitting, aiming to maximize the weighted sum data rate of users is formulated. Due to its complexity, two sub-problems are investigated, namely the UAV placement and RSMA parameters optimization. The resulting solutions are then combined to propose a novel alternating optimization method. Simulation results illustrate the latter's efficiency compared to baseline approaches.

cs.IT↗

arXiv2020

Aerial Platforms with Reconfigurable Smart Surfaces for 5G and Beyond

Aerial platforms are expected to deliver enhanced and seamless connectivity in the fifth generation (5G) wireless networks and beyond (B5G). This is generally achievable by supporting advanced onboard communication features embedded in heavy and energy-intensive equipment. Alternatively, reconfigurable smart surfaces (RSS), which smartly exploit/recycle signal reflections in the environment, are increasingly being recognized as a new wireless communication paradigm to improve communication links. In fact, their reduced cost, low power use, light weight, and flexible deployment make them an attractive candidate for integration with 5G/B5G technologies. In this article, we discuss comprehensive approaches to the integration of RSS in aerial platforms. First, we present a review of RSS technology, its operations and types of communication. Next, we describe how RSS can be used in aerial platforms, and we propose a control architecture workflow. Then, several potential use cases are presented and discussed. Finally, associated research challenges are identified.

eess.SP↗

arXiv2020

Multiple Access in Aerial Networks: From Orthogonal and Non-Orthogonal to Rate-Splitting

Recently, interest on the utilization of unmanned aerial vehicles (UAVs) has aroused. Specifically, UAVs can be used in cellular networks as aerial users for delivery, surveillance, rescue search, or as an aerial base station (aBS) for communication with ground users in remote uncovered areas or in dense environments requiring prompt high capacity. Aiming to satisfy the high requirements of wireless aerial networks, several multiple access techniques have been investigated. In particular, space-division multiple access(SDMA) and power-domain non-orthogonal multiple access (NOMA) present promising multiplexing gains for aerial downlink and uplink. Nevertheless, these gains are limited as they depend on the conditions of the environment. Hence, a generalized scheme has been recently proposed, called rate-splitting multiple access (RSMA), which is capable of achieving better spectral efficiency gains compared to SDMA and NOMA. In this paper, we present a comprehensive survey of key multiple access technologies adopted for aerial networks, where aBSs are deployed to serve ground users. Since there have been only sporadic results reported on the use of RSMA in aerial systems, we aim to extend the discussion on this topic by modelling and analyzing the weighted sum-rate performance of a two-user downlink network served by an RSMA-based aBS. Finally, related open issues and future research directions are exposed.

eess.SP↗

arXiv2020

Energy-Efficient Multi-UAV Data Collection for IoT Networks with Time Deadlines

In this paper, we focus on energy-efficient UAV-based IoT data collection in sensor networks in which the sensed data have different time deadlines. In the investigated setting, the sensors are clustered and managed by cluster heads (CHs), and multiple UAVs are used to collect data from the CHs. The formulated problem is solved through a two-step approach. In the first step, an efficient method is proposed to determine the minimal number of CHs and their best locations. Subsequently, the minimal number of UAVs and their trajectories are obtained by solving the associated capacitated vehicle routing problem. Results show the efficiency of our proposed CHs placement method compared to baseline approaches, where bringing the CHs closer to the dockstation allows significant energy savings. Moreover, among different UAV trajectory planning algorithms, Tabu search achieves the best energy consumption. Finally, the impact of the battery capacity and time deadline are investigated in terms of consumed energy, number of visited CHs, and number of deployed UAVs.

eess.SP↗

arXiv2020

On the Optimal 3D Placement of a UAV Base Station for Maximal Coverage of UAV Users

Unmanned aerial vehicles (UAVs) can be users that support new applications, or be communication access points that serve terrestrial and/or aerial users. In this paper, we focus on the connectivity problem of aerial users when they are exclusively served by aerial base stations (BS), i.e., UAVBSs. Specifically, the 3D placement problem of a directional antenna equipped UAV-BS, aiming to maximize the number of covered aerial users under a spectrum sharing policy with terrestrial networks, is investigated. Given a known spectrum sharing policy between the aerial and terrestrial networks, we propose a 3D placement algorithm that achieves optimality. Simulation results show the performance of our approach, in terms of number of covered aerial users, for different configurations and parameters, such as the spectrum sharing policy, antenna beamwidth, transmit power, and aerial users density. These results represent novel guidelines for exclusive aerial networks deployment and applications, distinctively for orthogonal and non-orthogonal spectrum sharing policies with terrestrial networks.

eess.SP↗

arXiv2020

Rate-Splitting Multiple Access: Unifying NOMA and SDMA in MISO VLC Channels

The increased proliferation of connected devices requires a paradigm shift towards the development of innovative technologies for the next generation of wireless systems. One of the key challenges, however, is the spectrum scarcity, owing to the unprecedented broadband penetration rate in recent years. Visible light communications (VLC) has recently emerged as a possible solution to enable high-speed short-range communications. However, VLC systems suffer from several limitations, including the limited modulation bandwidth of light-emitting diodes. Consequently, several multiple access techniques (MA), e.g., space-division multiple access (SDMA) and non-orthogonal multiple access (NOMA), have been considered for VLC networks. Despite their promising multiplexing gains, their performance is somewhat limited. In this article, we first provide an overview of the key MA technologies used in VLC systems. Then, we introduce rate-splitting multiple access (RSMA), which was initially proposed for RF systems and discuss its potentials in VLC systems. Through system modeling and simulations of an RSMA-based two-use scenario, we illustrate the flexibility of RSMA in generalizing NOMA and SDMA, as well as its superiority in terms of weighted sum rate (WSR) in VLC. Finally, we discuss challenges, open issues, and research directions, which will enable the practical realization of RSMA in VLC.

eess.SP↗

arXiv2020

On Byzantine Fault Tolerance in Multi-Master Kubernertes Clusters

Docker container virtualization technology is being widely adopted in cloud computing environments because of its lightweight and effiency. However, it requires adequate control and management via an orchestrator. As a result, cloud providers are adopting the open-access Kubernetes platform as the standard orchestrator of containerized applications. To ensure applications' availability in Kubernetes, the latter uses Raft protocol's replication mechanism. Despite its simplicity, Raft assumes that machines fail only when shutdown. This failure event is rarely the only reason for a machine's malfunction. Indeed, software errors or malicious attacks can cause machines to exhibit Byzantine (i.e. random) behavior and thereby corrupt the accuracy and availability of the replication protocol. In this paper, we propose a Kubernetes multi-Master Robust (KmMR) platform to overcome this limitation. KmMR is based on the adaptation and integration of the BFT-SMaRt fault-tolerant replication protocol into Kubernetes environment. Unlike Raft protocol, BFT-SMaRt is resistant to both Byzantine and non-Byzantine faults. Experimental results show that KmMR is able to guarantee the continuity of services, even when the total number of tolerated faults is exceeded. In addition, KmMR provides on average a consensus time 1000 times shorter than that achieved by the conventional platform (with Raft), in such condition. Finally, we show that KmMR generates a small additional cost in terms of resource consumption compared to the conventional platform.

cs.DC↗