arXiv Science⌕ Search

arXiv subjects

Valla Fatemi

Publications and source records attributed to Valla Fatemi.

At least 19 recordsLinked to original sources

Nitride crystalline barrier epitaxial SIS Josephson junctions by MBE

Superconductor-insulator-superconductor Josephson junctions with crystalline tunnel barriers have remained elusive by epitaxial techniques such as MOCVD or MBE that produce the junction materials and devices powering today's electronic and photonic systems like transistors and lasers. Here, we overcome the key materials hurdle to realize the first functional nitride crystalline barrier Josephson junctions by MBE. Despite an AlN barrier thickness of approximately 4.5 nm, the NbN/AlN/NbN trilayers exhibit coherent Josephson tunneling with critical current densities of approximately 17 A/cm2, an IcRn product of approximately 2.5 mV, and a superconducting gap voltage of approximately 3.7 mV with a BCS-like gap evolution with temperature. Hysteretic current-voltage characteristics and Fraunhofer current modulation with magnetic field establish underdamped SIS Josephson behavior. The realization of crystalline barrier Josephson junctions by MBE opens the doors to a richer materials palette with alloys and superlattice electrodes and tunnel barriers, as well as potential monolithic integration of superconducting quantum circuits with active electronic and photonic devices such as HEMTs and lasers.

cond-mat.supr-con↗

High-frequency dispersive readout of a superconducting qubit

Driving a low-dissipation, non-linear system periodically can destabilize it by exciting indirect resonances, which occur whenever an integer multiple of the drive frequency matches an integer combination of the system's mode frequencies. Avoiding such resonances is a central design constraint across physics and engineering, from radio-frequency ion traps to particle accelerators. Remarkably, the measurement of quantum bits based on superconducting circuits has so far remained limited by non-linear resonances. Measurements of qubit states are customarily performed in a regime where the frequency of the microwave readout tone is comparable to that of the circuit. In that case, the drive excites resonances that eject the qubit from its computational subspace. This limits the readout power and hence the achievable measurement fidelity. We show that a readout tone with frequency much larger than that of the circuit circumvents this problem by exponentially suppressing the resonances. Using a readout tone with frequency 12 times larger than that of our transmon qubit, we achieve a quantum non-demolition measurement fidelity of $99.931\pm0.003\%$, with an error an order of magnitude smaller than the previous record. Under these conditions, the probability of leakage to non-computational states per readout is $0.018\pm0.002\%$.

quant-ph↗

Berry curvature dipole circuit quantum electrodynamics

Quantum three-wave mixing is an important resource in superconducting quantum circuits. The traditional implementation uses Josephson junction arrays and is activated by magnetic flux. Here we introduce the Berry curvature dipole (BCD) quantum circuit element, which achieves quantum three-wave mixing without breaking time-reversal symmetry. This quantum three-wave mixing results from the BCD nonlinear Hall effect in noncentrosymmetric quantum materials taken to a dissipationless, quantum coherent few-photon regime. We show how nonlinear Hall materials can be integrated to superconducting microwave circuits to accomplish multiphoton vacuum Rabi splittings and dynamical stabilization of bosonic Schrödinger cat states. Such BCD circuit quantum electrodynamics are a concrete exemplar of a physical resource for quantum information processing enabled by nonlinear response in quantum materials.

cond-mat.mes-hall↗

Nonlocal Josephson coupling and current redistribution in a large-area graphene multiterminal Josephson junction

Multiterminal Josephson junctions (MTJJs) extend conventional two-terminal Josephson physics to devices defined by multiple superconducting phases, where rich phenomena have been predicted. However, in conventional MTJJs, superconducting transport is often dominated by local coupling between neighboring leads, obscuring physics that goes beyond simple connectivity. Here, we realize a multiterminal Josephson network in a graphene Hall bar geometry with micron-scale dimensions, enabling substantial nonlocal coupling between distant terminals. Our key observation is a pronounced negative differential longitudinal resistance (NDLR) in the four-probe response near switching currents, while no such feature appears in two-terminal measurements. We reproduce the NDLR response with a network containing the interplay between two distinct forms of nonlocality: nonlocal Josephson coupling, which determines the switching sequence of the superconducting network, and nonlocal normal-state conductance, which redistributes current after different regions switch. Our results highlight the potential of the emergent NDLR for characterizing superconductor--semiconductor hybrid systems and for nonlinear circuits. Further, this Josephson Hall bar geometry provides a platform for exploring the interplay between mesoscopic superconductivity and many-body ground states in graphene-based heterostructures.

cond-mat.mes-hall↗

Strongly coupled ultracompressed self-cavity plasmon polaritons at millikelvin temperatures

Van der Waals heterostructures exhibit self-cavity resonances from sub-terahertz to terahertz frequencies and thus offer an attractive route toward realizing cavity-modified phases of matter. Spectroscopy of such systems calls for high frequency resolution at millikelvin temperatures, which is extremely challenging with existing methods. Here we demonstrate a new platform for realizing and probing such systems. Superconducting layers define self-cavity structures with electromagnetic volume compression of order $10^7$. With an integrated graphene layer, we observe underdamped cavity plasmon polaritons at frequencies as low as 0.04 THz and which exhibit avoided crossings with cavity modes. To measure such spectra, we deploy a millikelvin-compatible sub-THz spectrometer based on a superconducting circuit. This work paves the way for simultaneous spectroscopy and transport measurements of cavity-matter hybrid systems at millikelvin temperatures.

cond-mat.mes-hall↗

Experimental quantum-computing-enhanced sensing using Grover's algorithm

The combination of quantum sensing with quantum computing to provide an enhancement over conventional quantum sensing has recently emerged as a promising potential application of quantum computing that could give advantages without needing large-scale or fault-tolerant hardware. In this work, we report an experimental demonstration of a recent theoretical proposal to repurpose Grover's search algorithm to improve the ability to detect signals with unknown frequency within a large detection bandwidth. Our experiments were based on a system comprising a single superconducting qubit coupled to a single superconducting cavity, highlighting the modest hardware requirements for realizing the protocol. We found that Grover-based sensing was able to outperform the natural non-Grover baseline for our experimental platform for detection bandwidths $>$10~MHz, with an advantage that empirically grew superlinearly with the bandwidth beyond that break-even point. The use of the Grover-based protocol reduced the amount of signal that needed to be sensed to make an accurate detection decision by more than 10$\times$ for choices of larger detection bandwidth and higher desired detection accuracy. Our results provide a proof-of-principle validation that Grover-based quantum computational sensing can be realized in near-term hardware and provide a metrological advantage well beyond break-even in spite of the additional protocol complexity.

quant-ph↗

Fabrication-free assessment of microwave losses in germanium-based dielectrics and superconductors

We present a flip-chip-based sensing scheme to measure effective microwave losses associated with target materials for quantum technologies, without requiring any device fabrication on the material under test. Using this approach, we quantify the microwave losses of a strain-engineered Ge/SiGe quantum well heterostructure and investigate losses arising from its Ge substrate and intermediate layers. The quality factors of the fabricated microwave resonators agree with the losses of dielectric materials independently extracted from flip-chip sensing measurements. We further study the superconductor platinum silicon germanide (PtSiGe) prepared by thermal reaction with a deposited Pt film, finding high microwave losses that limit the suitability of the films studied here as the sole superconductor for high-quality resonator applications. By coating Pt with Nb prior to the reaction, we observe a substantial reduction in microwave loss and a nearly three-fold enhancement of the transport critical temperature. The temperature dependence of the microwave loss is consistent with gap inhomogeneity in both superconducting films. These results identify constraints on material choices, provide design guidance for microwave circuits on planar Ge heterostructures, and demonstrate a fast-turnaround testing method for new materials for superconducting quantum circuits.

quant-ph↗

Evidence for a low-gap component in compressively stressed niobium thin films

We investigate the microwave response of sputtered Nb films as a function of biaxial film stress. Although transport measurements show nearly identical superconducting transition temperatures ($9.0\pm 0.2$K) and residual resistance ratios across the stress series, microwave resonators fabricated from highly compressive films exhibit enhanced temperature-dependent loss and larger frequency shifts. A conventional single-phase Mattis--Bardeen description yields an effective critical temperature of $2.4\pm0.2$K, approximately a factor of four below the value obtained from transport measurements. We show that the data are instead consistent with the presence of an additional low-gap component whose contribution increases with compressive stress. These results show that conventional transport measurements can overlook stress-dependent low-energy excitations that strongly influence microwave performance.

quant-ph↗

Quantum computational displacement sensing

Quantum computational sensing (QCS) combines quantum sensing with quantum computing to extract task-relevant information from the physical world. QCS can in principle achieve an accuracy advantage for specific tasks versus the alternative of raw-signal estimation using conventional quantum sensing followed by task-specific classical postprocessing. Here we report the experimental demonstration of quantum computational displacement sensing (QCDS) with a superconducting circuit comprising a qubit coupled to an oscillator. We consider binary classification sensing tasks, where the goal is to predict the class label of a single complex-valued displacement sensed once by the oscillator. Rather than estimating the displacement, our computational-sensing protocol -- using parameterized quantum circuits before and after sensing -- attempts to determine the binary class label using quantum processing and map it onto the ground or excited state of the qubit. A single measurement of the qubit directly outputs the prediction. We implemented circuits with up to 24 entangling gates and 38 free parameters, which were trained in silico. We show that increasing the circuit depth systematically improves expressivity and classification accuracy. We experimentally obtained an accuracy advantage over a suite of protocols that first use conventional quantum sensing to estimate the displacement before using classical postprocessing to perform prediction. For certain tasks, our protocol achieves a 15-percentage-points higher classification accuracy than most conventional approaches considered. Our results establish the feasibility of quantum computational sensing with noisy superconducting hardware and illustrate how integrating quantum computation with quantum sensing can enhance performance when the goal is to estimate a property or function of a signal rather than to estimate the signal.

quant-ph↗

Exponential quantum advantage for learning signals with a single qubit

Quantum technology has the potential to transform scientific discovery, but quantum advantages often require processing capabilities well beyond the reach of experimental platforms. We show that coupling a single controllable qubit to an otherwise conventional sensor can exponentially reduce the number of measurements required to learn classical signals. These rigorous quantum advantages apply to fundamental sensing tasks, including learning Fourier coefficients, extracting temporal correlations from time-varying signals, and estimating transformations of physical observables. Using a superconducting cavity--qubit architecture, we experimentally demonstrate $10^7$-fold reductions in the number of measurements required for Fourier-amplitude and time-varying signal learning. Our $\textit{quantum feature sensing}$ algorithms further enable orders-of-magnitude improvements in simulations of weak-signal dark matter detection and wireless communication applications. These quantum advantages are derived from Quantum Phase-Space Inference (Q$Ψ$), a unifying theory of quantum-enhanced experiments that simultaneously converts a set of experimental objectives and constraints into tight lower bounds and optimal quantum-enhanced learning algorithms while producing a certificate of quantum advantage. Q$Ψ$ extends beyond the regimes captured by quantum Fisher information and provides a framework for systematically identifying rigorous quantum advantages in practical experimental tasks. Together, our results establish that near-term quantum technology can exponentially enhance our ability to learn from classical signals.

quant-ph↗

Mixed spin-boson coupling for qubit readout with suppressed residual shot-noise dephasing

Direct dipole coupling between a two-level system and a bosonic mode describes the interactions present in a wide range of physical platforms. In this work, we study a coupling that is mixed between two pairs of quadratures of a bosonic mode and a spin. In this setting, we can suppress the dispersive shift while retaining a nonzero Kerr shift, which results in a quadratic relationship between shot-noise dephasing and thermal photons in the oscillator. We demonstrate this configuration with a simple toy model, quantify the expected improvements to photon shot-noise dephasing of the spin, and describe an approach to fast qubit readout via the Kerr shift. Further, we show how such a regime is achievable in superconducting circuits because magnetic and electric couplings can be of comparable strength, using two examples: the Cooper pair transistor and the fluxonium molecule.

quant-ph↗

High-Q superconducting microwave resonators using MBE titanium nitride

Using molecular beam epitaxy, we have realized thin films of titanium nitride (TiN) on c-plane sapphire that exhibit the lowest observed full-width at half maximum X-ray rocking curve width of 18 arcsec. Though the (111) oriented TiN exhibits an abrupt and crystalline interface with sapphire, for the first time we observe sub-surface defects in the sapphire substrate, which nucleate structural defects in the epitaxial TiN layer. Using quarter-wavelength coplanar waveguide (CPW) resonators in a 3 \textmu m/6 \textmu m/3 \textmu m gap/strip/gap lines in a hanger geometry, we find the internal quality factor of the TiN resonators to be $>10^{6}$ in the single-photon $\langle n \rangle \sim 1$ limit at 5.8 GHz and 10 mK, rising to $>20 \times 10^{6}$ at $\langle n \rangle \sim 10^{6}$. The results are of high interest for applications of superconducting TiN in several areas, and provide a path towards epitaxial Josephson junctions with crystalline barriers in the future for high coherence qubits.

cond-mat.supr-con↗

Bosonic Cyclic Codes: Trading Stabilizers for Gaussian Non-Clifford Phase Gates

Bosonic codes offer hardware-efficient approaches to quantum error correction, with the best encodings offering effective protection of idle quantum information against loss and dephasing - particularly rotation-symmetric codes, which include the cat and binomial code families. However, rotation-symmetric codes are only naturally endowed with a single logical Pauli gate, while other logical gates require the use of non-linear operations, obstructing the utility of these codes for realizing quantum algorithms. Here, we balance error protection with controllability by introducing bosonic cyclic codes: a generalization of rotation-symmetric codes that enable the measured tradeoff of error protection properties for fault-tolerant logical phase gates. Through our general construction, we find that sacrificing the detectability of a single photon loss relative to a rotation-symmetric code can yield a number of logical phase gates commensurate with the original rotation symmetry order of the code, all achievable via passive Gaussian rotations. Giving the corresponding generalizations of cat and binomial codes - which we dub cyclic cat and Vandermonde codes, respectively - we further find that many of the desirable properties of these codes transfer to the bosonic cyclic code setting. We go on to discuss the larger $SU(2)$ symmetry and rotation gates of the codes, which yield additional stabilizers and logical Pauli gates, as well as new non-Clifford gates for the smallest `kitten' binomial code, and provide a new error detection protocol. Finally, we introduce a general paradigm for converting higher-order stabilizers to logical gates, as in our generalization of rotation-symmetric codes, and apply it to several multimode bosonic codes.

quant-ph↗

Loopless multiterminal quantum circuits at odd parity

We theoretically investigate loopless multiterminal hybrid superconducting devices at odd fermion parity with time-reversal symmetry. We find that the energy-phase relationship has a double minimum corresponding to opposite windings of the superconducting phases. Spin-orbit coupling adds multi-axial spin splittings, which contrasts with two-terminal devices where spin dependence is uniaxial. Capacitive shunting localizes quantum circuit states in the wells and exponentially suppresses their splitting. For weak spin-orbit strength, the system has a four-dimensional spin-chirality low-energy subspace which can be universally controlled with electric fields only.

cond-mat.mes-hall↗

Strain engineering of Andreev spin qubits in Germanium

Planar germanium heterostructures are promising hosts for hybrid quantum devices due to their compatibility with superconductors, low material disorder, and relaxed fabrication constraints. Also, the potentially low density of nuclear spins and strong spin-orbit interaction make germanium attractive for coherent spin physics. However, recent microwave spectroscopy experiments were unable to resolve a spin-splitting of bound states in germanium Josephson junctions, the prerequisite for defining and controlling Andreev spin qubits. Here, we argue that compressive strain is the key mechanism suppressing spin splitting in current devices. Furthermore, we propose unstrained and tensile-strained heterostructures, fully compatible with state-of-the-art growth technology, that significantly enhance the relevant spin-orbit effect. By numerically simulating ballistic Josephson junctions, we predict spin splittings comfortably in the GHz range, more than 2 orders of magnitude larger than compressively strained cases, and all-electric quantum gates in a hundred nanoseconds. Our results establish strain engineering as a key design principle for realizing Andreev spin qubits in germanium-based devices.

cond-mat.mes-hall↗

Resist-free shadow deposition using silicon trenches for Josephson junctions in superconducting qubits

Superconducting qubit fabrication innovations continue to be explored to achieve higher performance. Despite improvements to base layer fabrication and processing, resist-based Josephson junction (JJ) schemes have largely remained unchanged. The polymer mask during deposition causes chemical contamination and limits in situ and ex situ surface preparation, junction materials, and scalability. Here, we demonstrate a resist-free approach to junction fabrication based on etched silicon trenches that is CMOS compatible and easily integrated into existing innovations in qubit base layer fabrication and chemical processing. We fabricate Al-AlOx-Al JJs and qubits using this method, measuring median energy relaxation times up to 184 microseconds. We find minimal contamination at the substrate-metal interface and fluctuations of energy relaxation on a 35 hour timescale that are narrow and normally distributed. The method widens the process window for substrate preparation and new materials platforms.

quant-ph↗

Error semitransparent universal control of a bosonic logical qubit

Bosonic codes offer hardware-efficient approaches to logical qubit construction and hosted the first demonstration of beyond-break even logical quantum memory. However, such accomplishments were done for idling information, and realization of fault-tolerant logical operations remains a critical bottleneck for universal quantum computation in scaled systems. Error-transparent (ET) gates offer an avenue to resolve this issue, but experimental demonstrations have been limited to phase gates. Here, we introduce a framework based on dynamic encoding subspaces that enables simple linear drives to accomplish universal gates that are error semi-transparent (EsT) to oscillator photon loss. With an EsT logical gate set of {X, H, T}, we observe a five-fold reduction in infidelity conditioned on photon loss, demonstrate extended active-manipulation lifetimes with quantum error correction, and construct a composite EsT non-Clifford operation using a sequence of eight gates from the set. Our approach is compatible with methods for detectable ancilla errors, offering an approach to error-mitigated universal control of bosonic logical qubits with the standard quantum control toolkit.

quant-ph↗

Frozonium: Freezing Anharmonicity in Floquet Superconducting Circuits

Floquet engineering is a powerful method that can be used to modify the properties of interacting many-body Hamiltonians via the application of periodic time-dependent drives. Here we consider the physics of an inductively shunted superconducting Josephson junction in the presence of Floquet drives in the fluxonium regime and beyond, which we dub the frozonium artificial atom. We find that in the vicinity of special ratios of the drive amplitude and frequency, the many-body dynamics can be tuned to that of an effectively linear bosonic oscillator, with additional nonlinear corrections that are suppressed in higher powers of the drive frequency. By analyzing the inverse participation ratios between the time-evolved frozonium wavefunctions and the eigenbasis of a linear oscillator, we demonstrate the ability to achieve a novel dynamical control using a combination of numerical exact diagonalization and Floquet-Magnus expansion. We discuss the physics of resonances between quasi-energy states induced by the drive, and ways to mitigate their effects. We also highlight the enhanced protection of frozonium against external sources of noise present in experimental setups. This work lays the foundation for future applications in quantum memory and bosonic quantum control using superconducting circuits.

cond-mat.mes-hall↗