arXiv subjects

Shu Zhang

Publications and source records attributed to Shu Zhang.

At least 289 records · Page 16Linked to original sources

arXiv2018

Mixed H/He bursts in SAX J1748.9-2021 during the spectral change of its 2015 outburst

SAX J1748.9-2021 is a transiently accreting X-ray millisecond pulsar. It is also known as an X-ray burster source discovered by Beppo-SAX. We analysed the persistent emission and type-I X-ray burst properties during its 2015 outburst. The source varied from hard to soft state within half day. We modeled the broad-band spectra of the persistent emission in the 1 - 250 keV energy band for both spectral states using the quasi-simultaneous INTEGRAL and Swift data. The broad-band spectra are well fitted by an absorbed thermal Componization model, compps, in a slab geometry. The best-fits for the two states indicate significantly different plasma temperature of 18 and 5 keV and the Thomson optical depth of 3 and 4, respectively. In total, 56 type-I X-ray bursts were observed during the 2015 outburst, of which 26 detected by INTEGRAL in the hard state, 25 by XMM-Newton in the soft state, and 5 by Swift in both states. As the object transited from the hard to the soft state, the recurrence time for X-ray bursts decreased from $\approx 2$ to $\approx1$ hr. The relation between the recurrence time, $ Δt_{\rm rec}$, and the local mass accretion rate per unit area onto the compact object, $\dot m$, is fitted by a power-law model, and yielded as best fit at $Δt_{\rm rec} \sim \langle \dot{m} \rangle^{-1.02\pm0.03}$ using all X-ray bursts. In both cases, the observed recurrence times are consistent with the mixed hydrogen/helium bursts. We also discuss the effects of type-I X-ray bursts prior to the hard to soft transition.

astro-ph.HE↗

arXiv2018

Spectral and timing analysis of the bursting pulsar GRO J1744-28 with RXTE observations

We analyzed RXTE/PCA observations of the bursting pulsar GRO J1744-28 during its two outbursts in 1995-1997. We have found a significant transition, i.e., a sharp change, of both spectral and timing properties around a flux of $\rm 10^{-8}\ ergs\ cm^{-2}\ s^{-1}$ (3-30 keV), which corresponds to a luminosity of 2--8$\rm \times 10^{37}\ ergs\ s^{-1}$ for a distance of 4--8 kpc. We define the faint (bright) state when the flux is smaller (larger) than this threshold. In the faint state, the spectral hardness increases significantly with the increasing flux, while remaining almost constant in the bright state. In addition, we find that the pulsed fraction is positively related to both the flux and the energy (<30keV) in both states. Thanks to the very stable pulse profile shape in all energy bands, a hard X-ray lag could be measured. This lag is only significant in the faint state (reaching $\sim$ 20\,ms between 3-4 keV and 16-20 keV), and much smaller in the bright state ($\lesssim$2ms). We speculate that the discovered transition might be caused by changes of the accretion structure on the surface of the neutron star, and the hard X-ray lags are due to a geometry effect.

astro-ph.HE↗

arXiv2018

Ferromagnetic domain wall as a nonreciprocal string

We present a simple model of a domain wall in a thin-film ferromagnet. A domain wall is represented as a nonreciprocal string, on which transverse waves propagate with different speeds in opposite directions. The model has three parameters: mass density, tension, and a gyroscopic constant quantifying the nonreciprocity. We discuss the unusual dynamics of a nonreciprocal string in finite geometry. It agrees well with numerically simulated motion of a ferromagnetic domain wall in a strip of constant width.

cond-mat.mes-hall↗

arXiv2018

Swift Observations of the bright uncatalogued X-ray transient MAXI J1535-571

The black hole candidate MAXI J1535-571 is a recently discovered X-ray transient. We report on the monitoring observations of Swift Gamma-Ray Burst Mission during outburst. The source transits from the hard state to the intermediate state, and reaches the soft state; near the end of the outburst, it returns to the hard state passing through the low intermediate state, following a typical Q-shaped loop in the hardness-intensity diagram. During the high intermediate state, detailed spectral analyses using a multi-temperature disk model reveal that the disk luminosity is flatter than the inner disk temperature to the fourth power, and the disk temperature profile varies as the disk radius raised to the power of -0.5, consistent with the behavior of a slim disk, implying that the disk structure has been modified due to the high luminosity of ~ 10^{39} erg/s. Meanwhile, the column density increases with the Eddington ratio, suggesting that the outflow matters are driven by radiation pressure due to the high accretion rate.

astro-ph.HE↗

arXiv2018

The Large Area Detector onboard the eXTP mission

The eXTP (enhanced X-ray Timing and Polarimetry) mission is a major project of the Chinese Academy of Sciences (CAS) and China National Space Administration (CNSA) currently performing an extended phase A study and proposed for a launch by 2025 in a low-earth orbit. The eXTP scientific payload envisages a suite of instruments (Spectroscopy Focusing Array, Polarimetry Focusing Array, Large Area Detector and Wide Field Monitor) offering unprecedented simultaneous wide-band X-ray spectral, timing and polarimetry sensitivity. A large European consortium is contributing to the eXTP study and it is expected to provide key hardware elements, including a Large Area Detector (LAD). The LAD instrument for eXTP is based on the design originally proposed for the LOFT mission within the ESA context. The eXTP/LAD envisages a deployed 3.4 m2 effective area in the 2-30 keV energy range, achieved through the technology of the large-area Silicon Drift Detectors - offering a spectral resolution of up to 200 eV FWHM at 6 keV - and of capillary plate collimators - limiting the field of view to about 1 degree. In this paper we provide an overview of the LAD instrument design, including new elements with respect to the earlier LOFT configuration.

astro-ph.IM↗

arXiv2018

Discrete FRFT-Based Frame and Frequency Synchronization for Coherent Optical Systems

A joint frame and carrier frequency synchronization algorithm for coherent optical systems, based on the digital computation of the fractional Fourier transform (FRFT), is proposed. The algorithm utilizes the characteristics of energy centralization of chirp signals in the FRFT domain, together with the time and phase shift properties of the FRFT. Chirp signals are used to construct a training sequence (TS), and fractional cross-correlation is employed to define a detection metric for the TS, from which a set of equations can be obtained. Estimates of both the timing offset and carrier frequency offset (CFO) are obtained by solving these equations. This TS is later employed in a phase-dependent decision-directed least-mean square algorithm for adaptive equalization. Simulation results of a 32-Gbaud coherent polarization division multiplexed Nyquist system show that the proposed scheme has a wide CFO estimation range and accurate synchronization performance even in poor optical signal-to-noise ratio conditions.

eess.SP↗

arXiv2018

Robust Faster-than-Nyquist PDM-mQAM Systems with Tomlinson-Harashima Precoding

A training-based channel estimation algorithm is proposed for the faster-than-Nyquist PDM-mQAM (m = 4, 16, 64) systems with Tomlinson-Harashima precoding (THP). This is robust to the convergence failure phenomenon suffered by the existing algorithm, yet remaining format-transparent. Simulation results show that the proposed algorithm requires a reduced optical signal-to-noise ratio (OSNR) to achieve a certain bit error rate (BER) in the presence of first-order polarization mode dispersion and phase noise introduced by the laser linewidth.

eess.SP↗

arXiv2018

Modulation Classification Using Received Signal's Amplitude Distribution for Coherent Receivers

In this letter, we propose a modulation classification algorithm which is based on the received signal's amplitude for coherent optical receivers. The proposed algorithm classifies the modulation format from several possible candidates by differentiating the cumulative distribution function (CDF) curves of their normalized amplitudes. The candidate with the most similar CDF to the received signal is selected. The measure of similarity is the minimum average distance between these CDFs. Five commonly used quadrature amplitude modulation formats in digital coherent optical systems are employed. Optical back-to-back experiments and extended simulations are carried out to investigate the performance of the proposed algorithm. Results show that the proposed algorithm achieves accurate classification at optical signal-to-noise ratios of interest. Furthermore, it does not require carrier recovery.

eess.SP↗

arXiv2017

Continuum of quantum fluctuations in a three-dimensional $S\!=\!1$ Heisenberg magnet

Conventional crystalline magnets are characterized by symmetry breaking and normal modes of excitation called magnons with quantized angular momentum $\hbar$. Neutron scattering correspondingly features extra magnetic Bragg diffraction at low temperatures and dispersive inelastic scattering associated with single magnon creation and annihilation. Exceptions are anticipated in so-called quantum spin liquids as exemplified by the one-dimensional spin-1/2 chain which has no magnetic order and where magnons accordingly fractionalize into spinons with angular momentum $\hbar/2$. This is spectacularly revealed by a continuum of inelastic neutron scattering associated with two-spinon processes and the absence of magnetic Bragg diffraction. Here, we report evidence for these same key features of a quantum spin liquid in the three-dimensional Heisenberg antiferromagnet NaCaNi$_2$F$_7$. Through specific heat and neutron scattering measurements, Monte Carlo simulations, and analytic approximations to the equal time correlations, we show that NaCaNi$_2$F$_7$ is an almost ideal realization of the spin-1 antiferromagnetic Heisenberg model on a pyrochlore lattice with weak connectivity and frustrated interactions. Magnetic Bragg diffraction is absent and 90\% of the spectral weight forms a continuum of magnetic scattering not dissimilar to that of the spin-1/2 chain but with low energy pinch points indicating NaCaNi$_2$F$_7$ is in a Coulomb phase. The residual entropy and diffuse elastic scattering points to an exotic state of matter driven by frustration, quantum fluctuations and weak exchange disorder.

cond-mat.str-el↗

arXiv2017

Insight-HXMT observations of the first binary neutron star merger GW170817

Finding the electromagnetic (EM) counterpart of binary compact star merger, especially the binary neutron star (BNS) merger, is critically important for gravitational wave (GW) astronomy, cosmology and fundamental physics. On Aug. 17, 2017, Advanced LIGO and \textit{Fermi}/GBM independently triggered the first BNS merger, GW170817, and its high energy EM counterpart, GRB 170817A, respectively, resulting in a global observation campaign covering gamma-ray, X-ray, UV, optical, IR, radio as well as neutrinos. The High Energy X-ray telescope (HE) onboard \textit{Insight}-HXMT (Hard X-ray Modulation Telescope) is the unique high-energy gamma-ray telescope that monitored the entire GW localization area and especially the optical counterpart (SSS17a/AT2017gfo) with very large collection area ($\sim$1000 cm$^2$) and microsecond time resolution in 0.2-5 MeV. In addition, \textit{Insight}-HXMT quickly implemented a Target of Opportunity (ToO) observation to scan the GW localization area for potential X-ray emission from the GW source. Although it did not detect any significant high energy (0.2-5 MeV) radiation from GW170817, its observation helped to confirm the unexpected weak and soft nature of GRB 170817A. Meanwhile, \textit{Insight}-HXMT/HE provides one of the most stringent constraints (~10$^{-7}$ to 10$^{-6}$ erg/cm$^2$/s) for both GRB170817A and any other possible precursor or extended emissions in 0.2-5 MeV, which help us to better understand the properties of EM radiation from this BNS merger. Therefore the observation of \textit{Insight}-HXMT constitutes an important chapter in the full context of multi-wavelength and multi-messenger observation of this historical GW event.

astro-ph.HE↗

arXiv2017

Theory and practice of simulation of optical tweezers

Computational modelling has made many useful contributions to the field of optical tweezers. One aspect in which it can be applied is the simulation of the dynamics of particles in optical tweezers. This can be useful for systems with many degrees of freedom, and for the simulation of experiments. While modelling of the optical force is a prerequisite for simulation of the motion of particles in optical traps, non-optical forces must also be included; the most important are usually Brownian motion and viscous drag. We discuss some applications and examples of such simulations. We review the theory and practical principles of simulation of optical tweezers, including the choice of method of calculation of optical force, numerical solution of the equations of motion of the particle, and finish with a discussion of a range of open problems.

physics.optics↗

arXiv2017

Active rotational and translational microrheology beyond the linear spring regime

Active particle tracking microrheometers have the potential to perform accurate broad-band measurements of viscoelasticity within microscopic systems. Generally, their largest possible precision is limited by Brownian motion and low frequency changes to the system. The signal to noise ratio is usually improved by increasing the size of the driven motion compared to the Brownian as well as averaging over repeated measurements. New theory is presented here which gives the complex shear modulus when the motion of a spherical particle is driven by non-linear forces. In some scenarios error can be further reduced by applying a variable transformation which linearises the equation of motion. This allows normalisation which eliminates low frequency drift in the particle's equilibrium position. Using this method will easily increase the signal strength enough to significantly reduce the measurement time for the same error. Thus the method is more conducive to measuring viscoelasticity in slowly changing microscopic systems, such as a living cell.

physics.flu-dyn↗

arXiv2017

Beyond Face Rotation: Global and Local Perception GAN for Photorealistic and Identity Preserving Frontal View Synthesis

Photorealistic frontal view synthesis from a single face image has a wide range of applications in the field of face recognition. Although data-driven deep learning methods have been proposed to address this problem by seeking solutions from ample face data, this problem is still challenging because it is intrinsically ill-posed. This paper proposes a Two-Pathway Generative Adversarial Network (TP-GAN) for photorealistic frontal view synthesis by simultaneously perceiving global structures and local details. Four landmark located patch networks are proposed to attend to local textures in addition to the commonly used global encoder-decoder network. Except for the novel architecture, we make this ill-posed problem well constrained by introducing a combination of adversarial loss, symmetry loss and identity preserving loss. The combined loss function leverages both frontal face distribution and pre-trained discriminative deep face models to guide an identity preserving inference of frontal views from profiles. Different from previous deep learning methods that mainly rely on intermediate features for recognition, our method directly leverages the synthesized identity preserving image for downstream tasks like face recognition and attribution estimation. Experimental results demonstrate that our method not only presents compelling perceptual results but also outperforms state-of-the-art results on large pose face recognition.

cs.CV↗

arXiv2017

Dense 3D Facial Reconstruction from a Single Depth Image in Unconstrained Environment

With the increasing demands of applications in virtual reality such as 3D films, virtual Human-Machine Interactions and virtual agents, the analysis of 3D human face analysis is considered to be more and more important as a fundamental step for those virtual reality tasks. Due to information provided by an additional dimension, 3D facial reconstruction enables aforementioned tasks to be achieved with higher accuracy than those based on 2D facial analysis. The denser the 3D facial model is, the more information it could provide. However, most existing dense 3D facial reconstruction methods require complicated processing and high system cost. To this end, this paper presents a novel method that simplifies the process of dense 3D facial reconstruction by employing only one frame of depth data obtained with an off-the-shelf RGB-D sensor. The experiments showed competitive results with real world data.

cs.CV↗

arXiv2017

A global study of Type B quasi-periodic oscillation in black hole X-ray binaries

We performed a global study on the timing and spectral properties of type-B quasi-periodic oscillations (QPOs) in the outbursts of black hole X-ray binaries. The sample is built based on the observations of {\it Rossi X-ray Timing Explorer}, via searching in the literature in RXTE era for all the identified type-B QPOs. To enlarge the sample, we also investigated some type-B QPOs that are reported but not yet fully identified. Regarding to the time lag and hard/soft flux ratio, we found that the sources with type-B QPOs behave in two subgroups. In one subgroup, type-B QPO shows a hard time lag that firstly decreases and then reverse into a soft time lag along with softening of the energy spectrum. In the other subgroup, type-B QPOs distribute only in a small region with hard time lag and relatively soft hardness. These findings may be understood with a diversity of the homogeneity showing up for the hot inner flow of different sources. We confirm the universality of a positive relation between the type-B QPO frequency and the hard component luminosity in different sources. We explain the results by considering that the type-B QPO photons are produced in the inner accretion flow around the central black hole, under a local Eddington limit. Using this relationship, we derived an mass estimation of $9.3-27.1$ $\rm{M_{\odot}}$ for the black hole in H 1743-322.

astro-ph.HE↗

arXiv2016

Search for transitions between states in redbacks and black widows using seven years of Fermi-LAT observations

Considering about seven years of Fermi-Large Area Telescope (LAT) data, we present a systematic search for variability possibly related to transitions between states in redbacks and black widow systems. Transitions are characterized by sudden and significant changes in the gamma-ray flux that persist on a timescale much larger than the orbital period. This phenomenology was already detected in the case of two redback systems, PSR J1023+0038 and PSR J1227-4853, for which we present here a dedicated study. We show the existence of only one transition for each of these systems over the past seven years. We determine their spectra, establishing high-energy cutoffs at a few GeV for the high gamma-ray state of PSR J1023+0038 and for both states of PSR J1227-4853. The surveying capability of the Fermi-LAT allows studying whether similar phenomenology has occurred in other sources. Although we have not found any hint for a state transition for most of the studied pulsars, we note two black-widow systems, PSR J2234+0944 and PSR J1446-4701, whose apparent variability is reminiscent of the transitions in PSR J1023+0038 and PSR J1227-4853. For the other systems we set limits on potential transitions in their measured gamma-ray light curves.

astro-ph.HE↗

arXiv2016

DeMeshNet: Blind Face Inpainting for Deep MeshFace Verification

MeshFace photos have been widely used in many Chinese business organizations to protect ID face photos from being misused. The occlusions incurred by random meshes severely degenerate the performance of face verification systems, which raises the MeshFace verification problem between MeshFace and daily photos. Previous methods cast this problem as a typical low-level vision problem, i.e. blind inpainting. They recover perceptually pleasing clear ID photos from MeshFaces by enforcing pixel level similarity between the recovered ID images and the ground-truth clear ID images and then perform face verification on them. Essentially, face verification is conducted on a compact feature space rather than the image pixel space. Therefore, this paper argues that pixel level similarity and feature level similarity jointly offer the key to improve the verification performance. Based on this insight, we offer a novel feature oriented blind face inpainting framework. Specifically, we implement this by establishing a novel DeMeshNet, which consists of three parts. The first part addresses blind inpainting of the MeshFaces by implicitly exploiting extra supervision from the occlusion position to enforce pixel level similarity. The second part explicitly enforces a feature level similarity in the compact feature space, which can explore informative supervision from the feature space to produce better inpainting results for verification. The last part copes with face alignment within the net via a customized spatial transformer module when extracting deep facial features. All the three parts are implemented within an end-to-end network that facilitates efficient optimization. Extensive experiments on two MeshFace datasets demonstrate the effectiveness of the proposed DeMeshNet as well as the insight of this paper.

cs.CV↗

arXiv2016

Adaptive Algorithm and Platform Selection for Visual Detection and Tracking

Computer vision algorithms are known to be extremely sensitive to the environmental conditions in which the data is captured, e.g., lighting conditions and target density. Tuning of parameters or choosing a completely new algorithm is often needed to achieve a certain performance level, especially when there is a limitation of the computation source. In this paper, we focus on this problem and propose a framework to adaptively select the "best" algorithm-parameter combination and the computation platform under performance and cost constraints at design time, and adapt the algorithms at runtime based on real-time inputs. This necessitates developing a mechanism to switch between different algorithms as the nature of the input video changes. Our proposed algorithm calculates a similarity function between a test video scenario and each training scenario, where the similarity calculation is based on learning a manifold of image features that is shared by both the training and test datasets. Similarity between training and test dataset indicates the same algorithm can be applied to both of them and achieve similar performance. We design a cost function with this similarity measure to find the most similar training scenario to the test data. The "best" algorithm under a given platform is obtained by selecting the algorithm with a specific parameter combination that performs the best on the corresponding training data. The proposed framework can be used first offline to choose the platform based on performance and cost constraints, and then online whereby the "best" algorithm is selected for each new incoming video segment for a given platform. In the experiments, we apply our algorithm to the problems of pedestrian detection and tracking. We show how to adaptively select platforms and algorithm-parameter combinations. Our results provide optimal performance on 3 publicly available datasets.

cs.CV↗