arXiv Science⌕ Search

arXiv subjects

Shenwei Yin

Publications and source records attributed to Shenwei Yin.

5 recordsLinked to original sources

Bandwidth-tunable thermal emitter via dynamic resonator coupling and loss

We demonstrate a dynamically tunable omnidirectional thermal emitter that can be switched from a narrowband emission state to a broadband state. The structure is a metal-backed multilayer with subwavelength thickness across the mid-infrared, which forms an angle-insensitive (up to 60°) optical cavity with one input port. We used an ultrathin VO2 layer to dynamically switch the coupling and loss coefficients of this optical cavity, resulting in narrowband emission from the vibrational mode of a polar dielectric layer that is part of the multilayer stack when the VO2 is in its insulating phase, and broadband emission from a nearly impedance-matched cavity when the VO2 is switched to its lossy metallic phase. We fabricated the structure around a free-standing silicon membrane and integrated it onto a printed circuit board (PCB), which enabled electrical switching of the emitter at the ten-to-hundred millisecond scale, and can be used for free-space identification, tagging, or communication.

physics.optics↗

Preventing overfitting in infrared ellipsometry using temperature dependence: fused silica as a case study

Fitting oscillator models to variable-angle spectroscopic ellipsometry (VASE) data can lead to non-unique, unphysical results. We demonstrate using temperature-dependent trends to prevent overfitting and ensure model physicality. As a case study, we performed mid-infrared VASE measurements on fused silica (SiO2) of various grades, from room temperature to 600 °C. We fitted oscillator models independently at each temperature, and confirmed the model's physical validity by observing the expected monotonic trends in vibrational oscillator parameters. Using this technique, we generated a highly accurate dataset for the temperature-dependent complex refractive index of fused silica for modeling mid-infrared optical components such as thermal emitters.

physics.optics↗

Self-referencing photothermal common-path interferometry to measure absorption of Si3N4 membranes for laser-light sails

Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled by high-intensity lasers. We investigated the near-infrared absorption of free-standing membranes of stoichiometric silicon nitride (Si$_3$N$_4$), a candidate sail material. To resolve the small but non-zero optical loss, we used photothermal common-path interferometry (PCI), for which we developed a self-referencing modality where a PCI measurement is performed twice: once on a bare membrane, and a second time with monolayer graphene deposited on the membrane. The graphene increases the absorption of the sample by orders of magnitude, such that it can be measured by ellipsometry, without significantly affecting the thermal properties. We measured the absorption coefficient of Si$_3$N$_4$ to be (1.5-3) $\times$ 10$^{-2}$ cm$^{-1}$ at 1064 nm, making it a suitable sail material for laser intensities as high as ~10 GW/m$^2$. By comparison, silicon-rich "low stress" SiN$_x$ (x~1), with a measured absorption coefficient of approximately 8 cm$^{-1}$, is unlikely to survive such high laser intensities. Our self-referencing technique enables testing of low-loss membranes of various materials for laser sails and other applications.

physics.optics↗

Tuning the surface energy of fluorinated diamond-like carbon coatings via plasma immersion ion implantation plasma-enhanced chemical vapor deposition with 1,1,1,2-tetrafluoroethane

We demonstrate an environmentally friendly and scalable method to create fluorine-doped diamond-like carbon (F-DLC) coatings using plasma immersion ion implantation plasma-enhanced chemical vapor deposition (PIII-PECVD) with 1,1,1,2-tetrafluoroethane. F-DLC films tend to have low wettability and good mechanical flexibility, which make them suitable for applications in biomedical devices and antibiofouling surfaces. We report on the effects of fluorine incorporation on the surface chemistry, surface energy, and morphology of these coatings, showing that our method is effective in increasing the fluorine content in the F-DLC up to 40%. We show that the addition of fluorine leads to a decrease in surface energy, which is consistent with a reduction in surface wettability.

cond-mat.mtrl-sci↗

Broadband light extraction from near-surface NV centers using crystalline-silicon antennas

We use crystalline silicon (Si) antennas to efficiently extract broadband single-photon fluorescence from shallow nitrogen-vacancy (NV) centers in diamond into free space. Our design features relatively easy-to-pattern high-index Si resonators on the diamond surface to boost photon extraction by overcoming total internal reflection and Fresnel reflection at the diamond-air interface, and providing modest Purcell enhancement, without etching or otherwise damaging the diamond surface. In simulations, ~17 times more single photons are collected from a single NV center compared to the case without the antenna; in experiments, we observe an enhancement of ~9 times, limited by spatial alignment between the NV and the antenna. Our approach can be readily applied to other color centers in diamond, and more generally to the extraction of light from quantum emitters in wide-bandgap materials.

physics.optics↗