arXiv subjects

Sergei A. Tretyakov

Publications and source records attributed to Sergei A. Tretyakov.

71 records · Page 4Linked to original sources

arXiv2013

Balanced and optimal bianisotropic particles: Maximizing power extracted from electromagnetic fields

Here we introduce the concept of "optimal particles" for strong interactions with electromagnetic fields. We assume that a particle occupies a given electrically small volume in space and study the required optimal relations between the particle polarizabilities. In these optimal particles, the inclusion shape and material are chosen so that the particles extract the maximum possible power from given incident fields. It appears that for different excitation scenarios the optimal particles are bianisotropic chiral, omega, moving, and Tellegen particles. The optimal dimensions of the resonance canonical chiral and omega particles are found analytically. Such optimal particles have extreme properties in scattering (for example, zero backscattering or invisibility). Planar arrays of optimal particles possess extreme properties in reflection and transmission (e.g., total absorption or magnetic-wall resonance), and volumetric composites of optimal particles realize, for example, such extreme materials as the chiral nihility medium.

physics.class-ph↗

arXiv2013

Total absorption of electromagnetic waves in ultimately thin layers

We consider single-layer arrays of electrically small lossy bi-anisotropic particles that completely absorb electromagnetic waves at normal incidence. Required conditions for electromagnetic properties of bi-anisotropic particles have been identified in the most general case of uniaxial reciprocal and nonreciprocal particles. We consider the design possibilities offered by the particles of all four fundamental classes of bianisotropic inclusions: reciprocal chiral and omega particles and nonreciprocal Tellegen and moving particles. We also study the reflection/transmission properties of asymmetric structures with different properties when illuminated from the opposite sides of the sheet. It has been found that it is possible to realize single-layer grids which exhibit the total absorption property when illuminated from one side but are totally transparent when illuminated from the other side (an ultimately thin isolator). Other possible properties are co-polarized or twist polarized reflection from the side opposite to the absorbing one. Finally, we discuss possible approaches to practical realization of particles with the properties required for single-layer perfect absorbers and other proposed devices.

physics.class-ph↗

arXiv2012

On the Minimal Scattering Response of PEC Cylinders in a Dielectric Cloak

Recently, it was shown that an infinite perfectly conducting (PEC) cylinder can be nearly perfectly cloaked from normally incident electromagnetic waves using a single-layer homogeneous dielectric cladding. Here we study the electromagnetic response of such structures with the goal to understand the main mechanisms underpinning this cloaking phenomenon. We introduce a simple model of the cloaked PEC cylinder, replacing it by an omnidirectional electric-line scatterer and a bipolar magnetic one; accordingly, the far field is determined in a compact closed form. The analysis of the results shows that the optimal cloaking regime corresponds to the frequency point where the total electric moment is drastically mitigated and thus the radiation pattern of the device resembles that of a magnetic-dipole line. In the vicinity of the optimal cloaking frequency we observe the response close to that of Huygens' pairs of electric and magnetic line scatterers.

math-ph↗

arXiv2012

Equivalent circuit model of radiative heat transfer

Here, we develop a theory of radiative heat transfer based on an equivalent electrical network representation for the hot material slabs in an arbitrary multilayered environment with arbitrary distribution of temperatures and electromagnetic properties among the layers. Our approach is fully equivalent to the known theories operating with the fluctuating current density, while being significantly simpler in analysis and applications. A practical example of the near-infrared heat transfer through the micron gap filled with an indefinite metamaterial is considered using the suggested method. The giant enhancement of the transferred heat compared to the case of the empty gap is shown.

physics.optics↗

arXiv2012

Equivalent circuit theory of radiative heat transfer on micro- and nanoscale

Here, we outline a theory of radiative heat transfer based on an equivalent electrical network representation for the hot material slabs in an arbitrary multilayered environment with arbitrary distribution of temperatures and electromagnetic properties among the layers. Our approach is fully equivalent to the known theories operating with the fluctuating current density, while being significantly simpler in analysis and applications.

physics.optics↗

arXiv2012

Circularly Polarized Receiving Antenna Incorporating Two Helices to Achieve Low Backscattering

We propose to use an antenna composed of two orthogonal helices as a low-scattering sensor. The vector effective length is derived for the antenna using the small dipole approximation for the helices. The antenna can transmit and receive circular polarization in all directions with the Huygens' pattern. We observe that the antenna geometry does not backscatter, regardless of the polarization, when the incidence direction is normal to the plane of the helices. Scattered fields, scattered axial ratio, and the scattering cross section are presented. We show that the zero-backscattering property holds also for the antenna when it is capable to receive all the available power with conjugate loading. The approximate analytical model is validated with full-wave simulations.

physics.class-ph↗

arXiv2012

Isotropic Chiral Objects With Zero Backscattering

In this paper we study electrically small chiral objects with isotropic response and zero backscattering. A bi-isotropic sphere is used as a simple example and its zero-backscattering conditions are studied. A theoretical model of an object composed of three orthogonal chiral particles made of conducting wire is presented as an analog of the zero-backscattering bi-isotropic sphere. A potential application of the object as a receiving antenna or a sensor with the ability to receive power from an arbitrary direction without backscattering is discussed.

physics.class-ph↗

arXiv2012

Bistatic scattering characterization of a three-dimensional broadband cloaking structure

Here we present the results of full experimental characterization of broadband cloaking of a finite-sized metallic cylinder at X-band. The cloaking effect is characterized by measuring the bistatic scattering patterns of uncloaked and cloaked objects in free space and then comparing these with each other. The results of the measurements demonstrate a broadband cloaking effect and are in good agreement with numerical predictions.

physics.class-ph↗

arXiv2011

Experimental characterization of a broadband transmission-line cloak in free space

The cloaking efficiency of a finite-size cylindrical transmission-line cloak operating in the X-band is verified with bistatic free space measurements. The cloak is designed and optimized with numerical full-wave simulations. The reduction of the total scattering width of a metal object, enabled by the cloak, is clearly observed from the bistatic free space measurements. The numerical and experimental results are compared resulting in good agreement with each other.

physics.class-ph↗

arXiv2009

Experimental Studies of Antenna Miniaturization Using Magneto-Dielectric and Dielectric Materials

Measurement results for a meandered planar inverted-F antenna (PIFA) loaded with magneto-dielectric and dielectric materials are presented. Figures of merit and ways to compare antennas with different fillings materials are discussed. The used magneto-dielectric material is described, the radiation mechanism of the meandered PIFA is studied, and the proper position for dielectric and magneto-dielectric filling is discussed and identified. Identical-size antennas with dielectric and magneto-dielectric fillings are compared at the same resonance frequency using the radiation quality factor as the figure of merit. It is seen, that the benefit from the magneto-dielectric filling material is moderate and strongly dependent on the positioning of the filling.

physics.class-ph↗

arXiv2009

Grounded Uniaxial Material Slabs as Magnetic Conductors

The objective of this paper is all-angle artificial magnetic conductor, i.e. artificial magnetic conductor that has stable magnetic-wall effect with respect to the incidence angle. Furthermore, we seek for a design that would be easy for manufacturing. In order to achieve this we use grounded uniaxial material slabs and we do not constrict ourselves to naturally available materials. Instead, we assume that the desired parameters can be synthesized using the emerging artificial electromagnetic materials. It is found that it is possible to have an all-angle magnetic-wall effect for both TE and TM polarization. Especially for the TM fields the structure would be easily manufacturable. The proposed structure has similar appearance as more well-known artificial impedance surfaces, but the design parameters and the physical properties behind the magnetic wall effect are novel. The performance of the proposed artificial magnetic conductor is verified with numerical simulations. This paper introduces a new approach how to obtain a magnetic-wall effect. It is possible to use this this approach also together with other ways of obtaining the magnetic-wall effect for dual-band operation.

physics.class-ph↗

arXiv2009

Choosing Dielectric or Magnetic Material to Optimize the Bandwidth of Miniaturized Resonant Antennas

We address the question of the optimal choice of loading material for antenna miniaturization. A new approach to identify the optimal loading material, dielectric or magnetic, is presented for resonant antennas. Instead of equivalent resonance circuits or transmission-line models, we use the analysis of radiation to identify the fields contributing mostly to the stored energy. This helps to determine the beneficial material type. The formulated principle is qualitatively illustrated using three antenna types. Guidelines for different antenna types are presented.

physics.class-ph↗

arXiv2008

Effects of Spatial Dispersion on Reflection from Mushroom-type Artificial Impedance Surfaces

Several recent works have emphasized the role of spatial dispersion in wire media, and demonstrated that arrays of parallel metallic wires may behave very differently from a uniaxial local material with negative permittivity. Here, we investigate using local and non-local homogenization methods the effect of spatial dispersion on reflection from the mushroom structure introduced by Sievenpiper. The objective of the paper is to clarify the role of spatial dispersion in the mushroom structure and demonstrate that under some conditions it is suppressed. The metamaterial substrate, or metasurface, is modeled as a wire medium covered with an impedance surface. Surprisingly, it is found that in such configuration the effects of spatial dispersion may be nearly suppressed when the slab is electrically thin, and that the wire medium can be modeled very accurately using a local model. This result paves the way for the design of artificial surfaces that exploit the plasmonic-type response of the wire medium slab.

physics.class-ph↗

arXiv2008

A Thin Electromagnetic Absorber for Wide Incidence Angles and Both Polarizations

In this paper a planar electromagnetic absorber is introduced whose performance is maintained over a wide change of the incidence angle for both TE and TM polarization. The absorber comprises an array of patches over a grounded dielectric slab, with clear advantage in terms of manufacturability. It is shown that a high value of the relative permittivity of the substrate is essential for the operation of the absorber. The main contribution of the paper is to demonstrate and practically use the presence of an additional resonance of high-impedance surfaces when the plasma frequency of the wire medium comprising metallic vias in the dielectric substrate is close to the original resonance of the high-impedance surface. The presence of the vias between FSS and the ground plane is discussed both for the case of a high-permittivity absorber and for a low permittivity one. The radius of the vias influences the oblique incidence TM absorption, and when properly designed, the insertion of the vias result in bandwidth enlargement and higher absorption.

physics.class-ph↗

arXiv2008

An Efficient and Simple Analytical Model for Analysis of Propagation Properties in Impedance Waveguides

In this paper propagation properties of a parallel-plate waveguide with tunable artificial impedance surfaces as sidewalls are studied both analytically and numerically. The impedance surfaces comprise an array of patches over a dielectric slab with embedded metallic vias. The tunability of surfaces is achieved with varactors. Simple design equations for tunable artificial impedance surfaces as well as dispersion equations for the TE and TM modes are presented. The propagation properties are studied in three different regimes: a multi-mode waveguide, a single-mode waveguide, and below-cutoff waveguide. The analytical results are verified with numerical simulations.

physics.class-ph↗

arXiv2007

Bianisotropic route to the realization and matching of backward-wave metamaterial slabs

A concept of backward-wave bianisotropic composite medium matched to free space is suggested. It is based on the use of a uniaxial bianisotropic structure embedded into a matrix with negative effective permittivity. Since bianisotropy is easier to achieve in the optical range than artificial magnetism, this concept is prospective for optical backward-wave metamaterials. As an example of possible realizations, a microwave Omega-composite combined with a wire lattice is analytically studied.

cond-mat.other↗

arXiv2005

Electromagnetic wave refraction at an interface of a double wire medium

Plane-wave reflection and refraction at an interface with a double wire medium is considered. The problem of additional boundary conditions (ABC) in application to wire media is discussed and an ABC-free approach, known in the solid state physics, is used. Expressions for the fields and Poynting vectors of the refracted waves are derived. Directions and values of the power density flow of the refracted waves are found and the conservation of the power flow through the interface is checked. The difference between the results, given by the conventional model of wire media and the model, properly taking into account spatial dispersion, is discussed.

cond-mat.mtrl-sci↗