arXiv subjects

Sergei A. Tretyakov

Publications and source records attributed to Sergei A. Tretyakov.

At least 55 records · Page 3Linked to original sources

arXiv2018

Toward Ultimate Control of Terahertz Wave Absorption in Graphene

It is commonly believed that weak light-matter interactions in low-mobility graphene dramatically limits tunability of graphene-based optoelectronic devices, such as tunable absorbers or switches. In this paper, we develop and use a simple circuit model to understand absorption in graphene sheets. In particular, we show that light interacts weakly also with very high-mobility graphene sheets and propose systematic design means to overcome these problems. The results have allowed us to demonstrate in the terahertz band that perfect absorption with excellent electrical tunability can be achieved within a wide span of mobility values which almost covers the whole range of ever reported room-temperature mobilities. Remarkably, concentrating on the most practical low-mobility graphene devices, we exemplify our theory with two cases: frequency-tunable and switchable absorbers with near 100% modulation efficiencies. Our work provides systematic and instructive insights into the design of highly tunable absorbers, without restrictions on graphene mobility. The design strategy and the developed analytical model can, in principle, be generalized to other wavelength regions from microwave to mid-infrared range, and other two-dimensional materials such as transition metal dichalcogenides (TMDs) and black phosphorus.

physics.optics↗

arXiv2018

Extreme Asymmetry in Metasurfaces via Evanescent Fields Engineering: Angular-Asymmetric Absorption

On the quest towards full control over wave propagation, the development of compact devices that allow asymmetric response is a challenge. In this Letter, we introduce a new paradigm for the engineering of asymmetry in planar structures, revealing and exploiting unilateral excitation of evanescent waves. We test the idea with the design and experimental characterization of a metasurface for angular-asymmetric absorption. The results show that the contrast ratio of absorption (the asymmetry level) can be arbitrarily engineered from zero to infinity for waves coming from two oppositely tilted angles. We demonstrate that the revealed asymmetry effects cannot be realized using conventional diffraction gratings, reflectarrays, and phase-gradient metasurfaces. This Letter opens up promising possibilities for wave manipulation via evanescent waves engineering with applications in one-side detection and sensing, angle-encoded steganography, flat nonlinear devices and shaping the scattering patterns of various objects.

physics.app-ph↗

arXiv2018

Near-Perfect Conversion of a Propagating Plane Wave into a Surface Wave Using Metasurfaces

In this paper, theoretical and numerical studies of perfect/nearly-perfect conversion of a plane wave into a surface wave are presented. The problem of determining the electromagnetic properties of an inhomogeneous lossless boundary which would fully transform an incident plane wave into a surface wave propagating along the boundary is considered. An approximate field solution which produces a slowly growing surface wave and satisfies the energy conservation law is discussed and numerically demonstrated. The results of the study are of great importance for the future development of such devices as perfect leaky-wave antennas and can potentially lead to many novel applications.

physics.optics↗

arXiv2018

Graphene-Based Tunable Metasurface for All-angle Perfect Absorption

Motivated by the idea of smart metasurfaces, we will demonstrate a graphene-based tunable absorber in which perfect absorption can be achieved for all angles of incidence, only by tuning the Fermi level of graphene. We place an unpatterned graphene sheet on a mushroom-type high impedance surface whose resonant frequency is stable for all incident angles. For TM-polarization, perfect absorption can be realized from normal to grazing incidence at the same frequency when modulating the Fermi level of graphene from 0.18 eV to 1 eV.

physics.app-ph↗

arXiv2018

Transmission magnitude and phase control for polarization-preserving reflectionless metasurfaces

For transmissive applications of electromagnetic metasurfaces, an array of subwavelength Huygens' metaatoms are typically used to eliminate reflection and achieve a high transmission power efficiency together with a wide transmission phase coverage. We show that the underlying principle of low reflection and full control over transmission is asymmetric scattering into the specular reflection and transmission directions that results from a superposition of symmetric and anti-symmetric scattering components, with Huygens' meta-atoms being one example configuration. Available for oblique illumination in TM polarization, a meta-atom configuration comprising normal and tangential electric polarizations is presented, which is capable of reflectionless, fullpower transmission and a $2π$ transmission phase coverage as well as full absorption. For lossy metasurfaces, we show that a complete phase coverage is still available for reflectionless designs for any value of absorptance. Numerical examples in the microwave and optical regimes are provided.

physics.optics↗

arXiv2018

Arbitrary beam control using passive lossless metasurfaces enabled by orthogonally-polarized custom surface waves

For passive, lossless impenetrable metasurfaces, a design technique for arbitrary beam control of receiving, guiding, and launching is presented. Arbitrary control is enabled by a custom surface wave in an orthogonal polarization such that its addition to the incident (input) and the desired scattered (output) fields is supported by a reactive surface impedance everywhere on the reflecting surface. Such a custom surface wave (SW) takes the form of an evanescent wave propagating along the surface with a spatially varying envelope. A growing SW appears when an illuminating beam is received. The SW amplitude stays constant when power is guided along the surface. The amplitude diminishes as a propagating wave (PW) is launched from the surface as a leaky wave. The resulting reactive tensor impedance profile may be realized as an array of anisotropic metallic resonators printed on a grounded dielectric substrate. Illustrative design examples of a Gaussian beam translator-reflector, a probe-fed beam launcher, and a near-field focusing lens are provided.

physics.optics↗

arXiv2018

Functional metasurfaces: Do we need normal polarizations?

We consider reciprocal metasurfaces with engineered reflection and transmission coefficients and study the role of normal (with respect to the metasurface plane) electric and magnetic polarizations on the possibilities to shape the reflection and transmission responses. We demonstrate in general and on a representative example that the presence of normal components of the polarization vectors does not add extra degrees of freedom in engineering the reflection and transmission characteristics of metasurfaces. Furthermore, we discuss advantages and disadvantages of equivalent volumetric and fully planar realizations of the same properties of functional metasurfaces.

physics.app-ph↗

arXiv2017

Acoustic metasurfaces for scattering-free anomalous reflection and refraction

Manipulation of acoustic wavefronts by thin and planar devices, known as metasurfaces, has been extensively studied, in view of many important applications. Reflective and refractive metasurfaces are designed using the generalized reflection and Snell's laws, which tell that local phase shifts at the metasurface supply extra momentum to the wave, presumably allowing arbitrary control of reflected or transmitted waves. However, as it has been recently shown for the electromagnetic counterpart, conventional metasurfaces based on the generalized laws of reflection and refraction have important drawbacks in terms of power efficiency. This work presents a new synthesis method of acoustic metasurfaces for anomalous reflection and transmission that overcomes the fundamental limitations of conventional designs, allowing full control of acoustic energy flow. The results show that different mechanisms are necessary in the reflection and transmission scenarios for ensuring perfect performance. Metasurfaces for anomalous reflection require non-local response, which allows energy channeling along the metasurface. On other hand, for perfect manipulation of anomalously transmitted waves, local and non-symmetric response is required. These conclusions are interpreted through appropriate surface impedance models which are used to find possible physical implementations of perfect metasurfaces in each scenario. We hope that this advance in the design of acoustic metasurfaces opens new avenues not only for perfect anomalous reflection and transmission but also for realizing more complex functionalities, such as focusing, self-bending or vortex generation.

cond-mat.mes-hall↗

arXiv2017

Self-Oscillating Wireless Power Transfer Systems

Conventional wireless power transfer systems consist of a microwave power generator and transmitter located at one place and a microwave power receiver located at a distance. Here we show that wireless power transfer can be realized as a single distributed microwave generator with an over-the-air feedback, so that the microwave power is generated directly at the place where the energy needs to be delivered. We demonstrate that the use of this paradigm increases efficiency and dramatically reduces sensitivity to misalignments, variations in load and power, and possible presence of obstacles between the source and receiver.

physics.app-ph↗

arXiv2017

Scanning characteristics of metamirror antennas with sub-wavelength focal distance

We investigate beam scanning by lateral feed displacement in novel metasurface based reflector antennas with extremely short focal distances. Electric field distributions of the waves reflected from the antenna are studied numerically and experimentally for defocusing angles up to 24 degree. The results show that despite their sub-wavelength focal distances, the scanning ability of metamirrors is similar to that of short-focus reflectarrays (focal distance about several wavelengths). In addition to offering a possibility to realize extremely small focal distances, metamirror antennas are practically penetrable and invisible for any radiation outside of the operating frequency range.

physics.optics↗

arXiv2016

Unlimited-Power Reflectors, Absorbers, and Emitters with Conjugately Matched Layers

In order to ensure the fastest wireless energy transfer from a source to the user one needs to maximize the channel capacity for power transport. In communications technologies, the concept of MIMO (multiple input, multiple output) exploits the idea of sending signals via many different rays which may reach the receiver. However, if we are concerned with the task of energy transfer, still only one mode is exploited, even if multiple antennas are used to send power to the receiver. In the near-field scenario, this is the magnetic dipole mode of receiving coil antennas. In the far-field scenario, this is the propagating plane wave TEM mode. Recently, it was shown that using special artificial materials it is possible to ensure that all electromagnetic modes of free space are conjugately matched to the modes of a material body and, thus, all modes deliver power to the body in the most effective way. Such a fascinating feature is acquired because the conjugate matching does not concern only the propagating modes but, most importantly, is applied to all evanescent modes. However, coupling to higher-order (mostly evanescent) modes is weak and disappears in the limit of an infinite planar boundary. We show that properly perturbing the surface of the receiving or emitting body with, for example, randomly distributed small particles we can open up channels for super-radiation into far zone. The currents induced in the small particles act as secondary sources which send the energy to travel far away from the surface and, reciprocally, receive power from far-located sources. We theoretically predict about 20-fold power transfer enhancement between the conjugately matched power-receiving body (as compared with the ideal black body) and far-zone sources. Reciprocally, the proposed structure radiates about 20 times more power into far zone as compared with the same source over a perfect reflector.

physics.class-ph↗

arXiv2016

Multifunctional Cascaded Metamaterials: Integrated Transmitarrays

Control of electromagnetic waves using engineered materials is very important in a wide range of applications, therefore there is always a continuous need for new and more efficient solutions. Known natural and artificial materials and surfaces provide a particular functionality in the frequency range they operate but cast a "shadow" and produce reflections at other frequencies. Here, we introduce a concept of multifunctional engineered materials that possess different predetermined functionalities at different frequencies. Such response can be accomplished by cascading metasurfaces (thin composite layers) that are designed to perform a single operation at the desired frequency and are transparent elsewhere. Previously, out-of-band transparent metasurfaces for control over reflection and absorption were proposed. In this paper, to complete the full set of functionalities for wave control, we synthesize transmitarrays that tailor transmission in a desired way, being "invisible" beyond the operational band. The designed transmitarrays for wavefront shaping and anomalous refraction are tested numerically and experimentally. To demonstrate our concept of multifunctional engineered materials, we have designed a cascade of three metasurfaces that performs three different functions for waves at different frequencies. Remarkably, applied to volumetric metamaterials, our concept can enable a single composite possessing desired multifunctional response.

physics.optics↗

arXiv2016

Homogenization of metasurfaces formed by random resonant particles in periodical lattices

In this paper we suggest a simple analytical method for description of electromagnetic properties of a geometrically regular two-dimensional subwavelength arrays (metasurfaces) formed by particles with randomly fluctuating polarizabilities. Such metasurfaces are of topical importance due to development of mass-scale bottom-up fabrication methods, for which fluctuations of the particles sizes, shapes, and/or composition are inevitable. Understanding and prediction of electromagnetic properties of such random metasurfaces is a challenge. We propose an analytical homogenization method applicable for normal wave incidence on particles arrays with dominating electric dipole responses and validate it with numerical point-dipole modeling using the supercell approach. We demonstrate that fluctuations of particles polarizabilities lead to increased diffuse scattering despite the subwavelength lattice constant of the array. The proposed method can be readily extended to oblique incidence and particles with both electric and magnetic dipole resonances.

physics.optics↗

arXiv2015

Overcoming black body radiation limit in free space: metamaterial superemitter

Here, we demonstrate that the power spectral density of thermal radiation at a specific wavelength produced by a body of finite dimensions set up in free space under a fixed temperature could be made theoretically arbitrary high, if one could realize double negative metamaterials with arbitrary small loss and arbitrary high absolute values of permittivity and permeability (at a given frequency). This result refutes the widespread belief that Planck's law itself sets a hard upper limit on the spectral density of power emitted by a finite macroscopic body whose size is much greater that the wavelength. Here we propose a physical realization of a metamaterial emitter whose spectral emissivity can be greater than that of the ideal black body under the same conditions. Due to the reciprocity between the heat emission and absorption processes such cooled down superemitter also acts as an optimal sink for the thermal radiation --- the "thermal black hole" --- which outperforms Kirchhoff-Planck's black body which can absorb only the rays directly incident on its surface. The results may open a possibility to realize narrowband super-Planckian thermal radiators and absorbers for future thermo-photovoltaic systems and other devices.

physics.optics↗

arXiv2015

Electromagnetic Energy Sink

The ideal black body fully absorbs all incident rays, that is, all propagating waves created by arbitrary sources. The known idealized realization of a black body is the perfectly matched layer (PML), widely used in numerical electromagnetics. However, ideal black bodies and PMLs do not interact with evanescent fields existing near any finite-size source, and the energy stored in these fields cannot be harvested. Here we introduce the concept of the ideal conjugate matched layer (CML), which fully absorbs energy of both propagating and evanescent fields of sources acting as an ideal sink for electromagnetic energy. Conjugate matched absorbers have exciting application potentials, as resonant attractors of electromagnetic energy into the absorber volume. We derive the conditions on the constitutive parameters of media which can serve as CML materials, numerically study the performance of planar and cylindrical CML and discuss possible realizations of such materials as metal-dielectric composites.

physics.optics↗

arXiv2015

Antenna model of the Purcell effect

The Purcell effect - the modification of the spontaneous emission rate in presence of resonant cavities or other resonant objects - is a fundamental effect of quantum electrodynamics. However, a change of the emission rate caused by environment different from free space has a classical counterpart. Not only quantum emitters, but any small antenna tuned to the resonance is an oscillator with radiative losses, and the influence of the environment on its radiation can be understood and measured in terms of the antenna radiation resistance. We present a general approach which is applicable to measurements of the Purcell factor for radio antennas and to calculations of these factors for quantum emitters. Our methodology is suitable for calculation and measurement of both electric and magnetic Purcell factors, it is versatile and applies to various frequency ranges. The approach is illustrated by a general equivalent scheme and allows the Purcell factor to be expressed through the continious radiation of a small antenna in presence of the environment.

physics.optics↗

arXiv2014

Least Upper Bounds of the Powers Extracted and Scattered by Bi-anisotropic Particles

The least upper bounds of the powers extracted and scattered by bi-anisotropic particles are investigated analytically. A rigorous derivation for particles having invertible polarizability tensors is presented, and the particles with singular polarizability tensors that have been reported in the literature are treated explicitly. The analysis concludes that previous upper bounds presented for isotropic particles can be extrapolated to bi-anisotropic particles. In particular, it is shown that neither nonreciprocal nor magnetoelectric coupling phenomena can further increase those upper bounds on the extracted and scattered powers. The outcomes are illustrated further with approximate circuit model examples of two dipole antennas connected via a generic lossless network.

physics.optics↗

arXiv2014

Determining polarizability tensors for an arbitrary small electromagnetic scatterer

In this paper, we present a method to retrieve tensor polarizabilities of general bi-anisotropic particles from their far-field responses to plane-wave illuminations. The necessary number of probing excitations and the directions where the scattered fields need to be calculated or measured have been found. When implemented numerically, the method does not require any spherical harmonic expansion nor direct calculation of dipole moments, but only calculations of co- and cross-polarized scattering cross sections for a number of plane-wave excitations. With this simple approach, the polarizabilities can be found also from experimentally measured cross sections. The method is exemplified considering two bi-anisotropic particles, a reciprocal omega particle and a non-reciprocal particle containing a ferrite inclusion coupled to metal strips.

physics.optics↗