arXiv subjects

Sebastian Fähler

Publications and source records attributed to Sebastian Fähler.

At least 19 recordsLinked to original sources

arXiv2026

Thermoelastic Harvesting Outperforming Thermoelectric Generators Below 100 °C

Low-grade waste heat below 100 degC is one of the largest untapped opportunities in solid-state energy conversion. Three ferroic routes are candidates for recovering this resource: thermomagnetic, pyroelectric, and thermoelastic harvesters. The last has remained the most unexplored, despite decades of progress on the underlying NiTi shape-memory alloy wires. Three system-design changes close this gap: a protagonist-antagonist architecture that recovers the energy for prestraining, a continuously tunable prestrain mechanism that sets the force-strain balance, and transversal water flow that decouples cycle frequency from wire length. The resulting harvester delivers a directly measured power density of 366 mW/cm^3 with respect to the active material, about 1.7 times the next-best thermoelastic device, ahead of every reported thermomagnetic and pyroelectric generator, and outperforming the best thermoelectric generators in this temperature range also with respect to power per material cost. The system maps the parameter space directly through force and displacement measurements, without using material-property estimates, giving a quantitative picture of how the alloy responds while the device is doing work.

cond-mat.mtrl-sci↗

arXiv2026

Anomalous thermal and elastic properties of an epitaxial NiTi film exhibiting R-phase

Shape memory alloys like NiTi are at the core of emerging thermal management applications, including elastocaloric refrigeration, thermoelastic harvesting, and latent heat storage. Most of these applications benefit from a small scale due to the accelerated heat exchange, but obtaining precise functional properties of films is challenging. Here we demonstrate that transient grating spectroscopy (TGS) enables characterization of elastic coefficients and thermal diffusivity of a 3 $μ$m thick epitaxial NiTi film during a thermally induced phase transformation. The in-situ measurement of a complete austenite$\rightarrow$R-phase$\rightarrow$martensite$\rightarrow$austenite temperature cycle reveals that the elastic properties exhibit a crossover of the shear moduli (from $c^\prime < c_{44}$ in austenite to $c^\prime > c_{44}$ in martensite) and that the thermal diffusivity changes by 450 $\%$ between the R-phase and austenite. This dramatic change, together with the absence of hysteresis between the R-phase and austenite, makes NiTi a promising material candidate for thermal switches. The results indicate that the change in thermal diffusivity originates from an anomalous heat capacity of the R-phase. Furthermore, our TGS study provides temperature-dependent thermal and elastic properties required for simulating thermal management microsystems using this material.

cond-mat.mtrl-sci↗

arXiv2026

Understanding Energy Flow and Inefficiency of a Thermomagnetic Generator by Transient Multi-Physics Modelling

Waste heat recovery improves energy efficiency and reduces greenhouse gas emissions; however, much industrial and environmental heat is wasted at low temperature. Thermomagnetic recovery of waste heat has a high potential for sustainable production of electric energy, especially for low-grade waste heat where conventional technology is inefficient or infeasible. Of particular interest are thermomagnetic generators (TMG) as they require almost no mechanically moving parts, which is beneficial for high reliability. However, all existing prototypes have two remaining challenges: low efficiency and low cycle frequency. In this work, we develop a digital twin of a recent TMG with genus 3 by using multi-physics simulations. We identify shortcomings of previous simulation approaches, and describe why simulations in three dimensions are necessary, which consider coupling between magnetic, thermal, fluid flow, and electrical physics domains. We validate our model, which only uses known geometry and material parameters, by experimental data of the TMG with highest power density today, and attain 96% accuracy in open-circuit voltage and 95% accuracy in power output. This high accuracy allows us to identify the origin of both challenges for TMGs, which are not accessible by experiments. First, we uncover inefficiencies by analyzing the energy flow within a Sankey diagram. Second, we trace the transient heat flow through the generator, which identifies the factors limiting frequency. This paves the way for more efficient and faster TMGs, and their development will be accelerated by our validated digital twin.

physics.app-ph↗

arXiv2025

Sub-nanosecond structural dynamics of the martensitic transformation in Ni-Mn-Ga

Martensitic transformations drive a multitude of emerging applications, which range from high stroke actuation and, mechanocaloric refrigeration, to thermoelastic energy harvesting. All these applications benefit from faster transformations, as a high cycle frequency is essential for achieving high power density. However, systematic investigations of the fast dynamics and fundamental speed limits of martensitic transformations are scarce. Especially for ultrashort time transformations, the temperature evolution throughout the transformation is not measured, which is a substantial shortcoming as temperature is the intrinsic force driving the transformation. Here, we present a synchrotron-based time-resolved X-ray diffraction study of a 270 fs laser-induced martensitic transformation in a Ni-Mn-Ga-based epitaxial thin film. We observe the transformation from martensite to austenite within about 100 ps, just limited by the synchrotron probe pulse duration. Furthermore, a full transformation cycle from martensite to austenite and back to martensite can almost be finished within 5 ns, which is the fastest martensitic transformation reported so far. Measurements and calculations of the temperature evolution allow us to analyse the influence of temperature on transformation time. By time-resolved strain measurements we demonstrate that in addition to temperature, thermal film stress must be considered as a competing influence on the martensitic transformation. Our experimental findings are supported by molecular dynamics simulations with machine learned force fields adapted to density functional theory calculations. These reveal that the huge distortion during a martensitic transformation requires the collective movement of many atoms within the microstructure, which delays the transformation.

cond-mat.mtrl-sci↗

arXiv2024

Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling

Shape memory alloys have a wide range of applications, including high stroke actuation, energy-efficient ferroic cooling, and energy harvesting. These applications are based on a reversible martensitic transformation, which results in a complex microstructure in the martensitic state. Understanding the formation of this microstructure after fast heating and cooling is crucial, as a high cycle frequency is essential for achieving high power density in the mentioned applications. This article uses an epitaxial Ni-Mn-Ga film as a model system to study the formation of the martensitic microstructure, since the high surface-to-volume ratio of thin films enables rapid heating and cooling, and since the formation of a multi-level hierarchical microstructure during slow cooling of this material system is already well understood. We apply a millisecond flash lamp pulse of varying energy density on the Ni-Mn-Ga film and analyse the hierarchical martensitic microstructure afterwards. Substantial differences compared to slow cooling occur, which we attribute to the limited time available for the microstructure to form and to the thermal stress between film and substrate during rapid temperature changes.

cond-mat.mtrl-sci↗

arXiv2024

Multiferroic Microstructure Created from Invariant Line Constraint

Ferroic materials enable a multitude of emerging applications, and optimum functional properties are achieved when ferromagnetic and ferroelectric properties are coupled to a first-order ferroelastic transition. In bulk materials, this first-order transition involves an invariant habit plane, connecting coexisting phases: austenite and martensite. Theory predicts that this plane should converge to a line in thin films, but experimental evidence is missing. Here, we analyze the martensitic and magnetic microstructure of a freestanding epitaxial magnetic shape memory film. We show that the martensite microstructure is determined by an invariant line constraint using lattice parameters of both phases as the only input. This line constraint explains most of the observable features, which differ fundamentally from bulk and constrained films. Furthermore, this finite-size effect creates a remarkable checkerboard magnetic domain pattern through multiferroic coupling. Our findings highlight the decisive role of finite-size effects in multiferroics.

cond-mat.mtrl-sci↗

arXiv2022

What is the speed limit of martensitic transformations?

Structural martensitic transformations enable various applications, which range from high stroke actuation and sensing to energy efficient magnetocaloric refrigeration and thermomagnetic energy harvesting. All these emerging applications benefit from a fast transformation, but up to now the speed limit of martensitic transformations has not been explored. Here, we demonstrate that a martensite to austenite transformation can be completed in under ten nanoseconds. We heat an epitaxial Ni-Mn-Ga film with a laser pulse and use synchrotron diffraction to probe the influence of initial sample temperature and overheating on transformation rate and ratio. We demonstrate that an increase of thermal energy drives this transformation faster. Though the observed speed limit of 2.5 x 10^{27} (Js)^{-1} per unit cell leaves plenty of room for a further acceleration of applications, our analysis reveals that the practical limit will be the energy required for switching. Our experiments unveil that martensitic transformations obey similar speed limits as in microelectronics, which are expressed by the Margolus-Levitin theorem.

cond-mat.mtrl-sci↗

arXiv2020

Efficient and affordable thermomagnetic materials for harvesting low grade waste heat

Industrial processes release substantial quantities of waste heat, which can be harvested to generate electricity. At present, the conversion of low grade waste heat to electricity relies solely on thermoelectric materials, but such materials are expensive and have low thermodynamic efficiencies. Although thermomagnetic materials may offer a promising alternative, their performance remains to be evaluated, thereby hindering their real-world application. Here we evaluate the efficiency and cost effectiveness of thermomagnetic materials that can be used in motors, oscillators and generators for converting waste heat to electricity. Our analysis reveals that up to temperature differences of several 10 K the best thermomagnetic materials outperform thermoelectric materials. Importantly, we find that the price per watt for some thermomagnetic materials are much lower compared to present-day thermoelectrics and can become competitive with conventional power plants. The materials library that we present here enables the selection of the best available thermomagnetic materials for harvesting waste heat and gives guidelines for their future development.

physics.app-ph↗

arXiv2020

Building hierarchical martensite

Martensitic materials show a complex, hierarchical microstructure containing structural domains separated by various types of twin boundaries. Several concepts exist to describe this microstructure on each length scale, however, there is no comprehensive approach bridging the whole range from the nano- up to the macroscopic scale. Here, we describe for a Ni-Mn-based Heusler alloy how this hierarchical microstructure is built from scratch with just one key parameter: the tetragonal distortion of the basic building block at the atomic level. Based on this initial block, we introduce five successive levels of nested building blocks. At each level, a larger building block is formed by twinning the preceding one to minimise the relevant energy contributions locally. This naturally explains the occurrence of different types of twin boundaries. We compare this scale-bridging approach of nested building blocks with experiments in real and reciprocal space. Our approach of nested building blocks is versatile as it can be applied to the broad class of functional materials exhibiting diffusionless transformations.

cond-mat.mtrl-sci↗

arXiv2017

Reversible tuning of magnetocaloric Ni-Mn-Ga-Co films on ferroelectric PMN-PT substrates

Tuning functional properties of thin caloric films by mechanical stress is currently of high interest. In particular, a controllable magnetisation or transition temperature is desired for improved usability in magnetocaloric devices. Here, we present results of epitaxial magnetocaloric Ni-Mn-Ga-Co thin films on ferroelectric Pb(Mg$_{1/3}$Nb$_{2/3}$)$_{0.72}$Ti$_{0.28}$O$_3$ (PMN-PT) substrates. Utilizing X-ray diffraction measurements, we demonstrate that the strain induced in the substrate by application of an electric field can be transferred to the thin film, resulting in a change of the lattice parameters. We examined the consequences of this strain on the magnetic properties of the thin film by temperature and electric field dependent measurements. We did not observe a change of martensitic transformation temperature but a reversible change of magnetisation within the austenitic state, which we attribute to the intrinsic magnetic instability of this metamagnetic Heusler alloy.

cond-mat.mtrl-sci↗

arXiv2017

Modulations in martensitic Heusler alloys originate from nanotwin ordering

Heusler alloys exhibiting magnetic and martensitic transitions enable applications like magnetocaloric refrigeration and actuation based on the magnetic shape memory effect. Their outstanding functional properties depend on low hysteresis losses and low actuation fields. These are only achieved if the atomic positions deviate from a tetragonal lattice by periodic displacements. The origin of the so-called modulated structures is the subject of much controversy: They are either explained by phonon softening or adaptive nanotwinning. Here we used large-scale density functional theory calculations on the Ni2MnGa prototype system to demonstrate interaction energy between twin boundaries. Minimizing the interaction energy resulted in the experimentally observed ordered modulations at the atomic scale, it explained that a/b twin boundaries are stacking faults at the mesoscale, and contributed substantially to the macroscopic hysteresis losses. Furthermore, we found that phonon softening paves the transformation path towards the nanotwinned martensite state. This unified both opposing concepts to explain modulated martensite.

cond-mat.mtrl-sci↗

arXiv2017

Nucleation and growth of hierarchical martensite in epitaxial shape memory films

Shape memory alloys often show a complex hierarchical morphology in the martensitic state. To understand the formation of this twin-within-twins microstructure, we examine epitaxial Ni-Mn-Ga films as a model system. In-situ scanning electron microscopy experiments show beautiful complex twinning patterns with a number of different mesoscopic twin boundaries and macroscopic twin boundaries between already twinned regions. We explain the appearance and geometry of these patterns by constructing an internally twinned martensitic nucleus, which can take the shape of a diamond or a parallelogram, within the basic phenomenological theory of martensite. These nucleus contains already the seeds of different possible mesoscopic twin boundaries. Nucleation and growth of these nuclei determines the creation of the hierarchical space-filling martensitic microstructure. This is in contrast to previous approaches to explain a hierarchical martensitic microstructure. This new picture of creation and anisotropic, well-oriented growth of twinned martensitic nuclei explains the morphology and exact geometrical features of our experimentally observed twins-within-twins microstructure on the meso- and macroscopic scale.

cond-mat.mtrl-sci↗

arXiv2017

Geometry of Adaptive Martensite in Ni-Mn-based Heusler alloys

Modulated martensites play an important role in magnetic shape memory alloys, because all functional properties are closely connected to the twin microstructure and the phase boundary. The nature of the modulated martensites is still unclear. One approach is the concept of adaptive martensite, which regards all modulated phases as nanotwinned microstructures. In this article, we use the Ni-Mn-based shape memory alloys as an example to show the geometric rationale behind this concept using analytic equations based on the phenomenological theory of martensite. This could enhance discussions about the implications of the adaptive martensite by showing the exact relations between the various unit cells used to describe the structure. We use the concept to discuss the compatibility at the habit plane, the nature of high-order twin boundaries and the dependence of the lattice constants on the different types of modulation.

cond-mat.mtrl-sci↗

arXiv2016

Growth, microstructure and thermal transformation behaviour of epitaxial Ni-Ti films

Epitaxial films have the potential to be used as model systems for fundamental investigations on the martensitic transformation in binary NiTi. In this paper, we discuss growth of binary NiTi thin films on single crystalline MgO substrates. Sputter deposition is used to grow NiTi films. Films prepared by complementary preparation routes (with different deposition temperatures and subsequent heat treatments) are investigated by X-ray diffraction, electron microscopy, atomic force microscopy, and electrical resistivity measurements, with the aim of optimizing film properties, particularly to obtain a well defined orientation of the austenitic unit cell and smooth surfaces. Our results show that deposition at elevated temperatures and carefully controlled subsequent heat treatments allow to produce epitaxially grown and smooth NiTi films that exhibit reversible one- or two-step martensitic transformations.

cond-mat.mtrl-sci↗

arXiv2016

On the origin of perpendicular magnetic anisotropy in strained Fe-Co(-X) films

Very high magnetic anisotropies have been theoretically predicted for strained Fe-Co(-X) and indeed several experiments on epitaxial thin films seemed to confirm strain induced anisotropy enhancement. This study presents a critical analysis of the different contributions to perpendicular anisotropy: volume, interface and surface anisotropies. Tracing these contributions, thickness series of single layer films as well as multilayers with Au-Cu buffers/interlayers of different lattice parameters have been prepared. The analysis of their magnetic anisotropy reveals a negligible influence of the lattice parameter of the buffer. Electronic effects, originating from both, the Au-Cu interface and the film surface, outrange the elastic effects. Surface anisotropy, however, exceeds the interface anisotropy by more than a factor of three. A comparison with results from Density Functional Theory suggests, that the experimentally observed strong perpendicular surface anisotropy originates from a deviation from an ideal oxide-free surface. Accordingly, tailored Fe-Co-X/oxide interfaces may open a route towards high anisotropy in rare-earth free materials.

cond-mat.mtrl-sci↗

arXiv2015

Enhanced and Tunable Spin-Orbit Coupling in Tetragonally Strained Fe-Co-B Films

We have synthesized 20 nm thick films of tetragonally strained interstitial Fe-Co-B alloys epitaxially grown on Au55Cu45 buffer layer. The strained axis is perpendicular to the film plane and the corresponding lattice constant c is enlarged with respect to the in-plane lattice parameter a. By adding the interstitial boron with different concentrations 0, 4, and 10 at.% we were able to stabilize the tetragonal strain in 20 nm Fe-Co films with different c/a ratios of 1.013, 1.034 and 1.02, respectively. Using ferromagnetic resonance (FMR) and x-ray magnetic circular dichroism (XMCD) we found that the orbital magnetic moment increases with increasing the c/a ratio, pointing towards the enhancement of spin-orbit coupling (SOC) at larger strain. Our results show that careful doping of ferromagnetic films allows to control the SOC by stabilizing anisotropic strain states. These findings are applicable in material design for spintronics applications. We also discuss the influence of B doping on the Fe-Co film microstructure, its magnetic properties and magnetic relaxation.

cond-mat.mtrl-sci↗

arXiv2015

From soft to hard magnetic Fe-Co-B by spontaneous strain: A combined first principle and thin film study

In order to convert the well-known Fe-Co-B alloy from a soft to a hard magnet, we propose tetragonal strain by interstitial boron. Density functional theory reveals that when B atoms occupy octahedral interstitial sites, the bcc Fe-Co lattice is strained spontaneously. Such highly distorted Fe-Co is predicted to reach a strong magnetocrystalline anisotropy which may compete with shape anisotropy. Probing this theoretical suggestion experimentally, epitaxial films are examined. A spontaneous strain up to 5 % lattice distortion is obtained for B contents up to 4 at%, which leads to uniaxial anisotropy constants exceeding 0.5 MJ/m^3. However, a further addition of B results in a partial amorphization, which degrades both anisotropy and magnetization.

cond-mat.mtrl-sci↗

arXiv2014

Increased magnetocrystalline anisotropy in epitaxial Fe-Co-C thin films with spontaneous strain

Rare earth free alloys are in focus of permanent magnet research since the accessibility of the elements needed for nowadays conventional magnets is limited. Tetragonally strained iron-cobalt (Fe-Co) has attracted large interest as promising candidate due to theoretical calculations. In experiments, however, the applied strain quickly relaxes with increasing film thickness and hampers stabilization of a strong magnetocrystalline anisotropy. In our study we show that already 2 at% of carbon substantially reduce the lattice relaxation leading to the formation of a spontaneously strained phase with 3 % tetragonal distortion. In these strained (Fe$_{0.4}$Co$_{0.6}$)$_{0.98}$C$_{0.02}$ films, a magnetocrystalline anisotropy above 0.4 MJ/m$^3$ is observed while the large polarization of 2.1 T is maintained. Compared to binary Fe-Co this is a remarkable improvement of the intrinsic magnetic properties. In this paper, we relate our experimental work to theoretical studies of strained Fe-Co-C and find a very good agreement.

cond-mat.mtrl-sci↗