arXiv subjects

S. Dietrich

Publications and source records attributed to S. Dietrich.

At least 163 records · Page 9Linked to original sources

arXiv2004

Colloidal hard-rod fluids near geometrically structured substrates

Density functional theory is used to study colloidal hard-rod fluids near an individual right-angled wedge or edge as well as near a hard wall which is periodically patterned with rectangular barriers. The Zwanzig model, in which the orientations of the rods are restricted to three orthogonal orientations but their positions can vary continuously, is analyzed by numerical minimization of the grand potential. Density and orientational order profiles, excess adsorptions, as well as surface and line tensions are determined. The calculations exhibit an enrichment [depletion] of rods lying parallel and close to the corner of the wedge [edge]. For the fluid near the geometrically patterned wall, complete wetting of the wall -- isotropic liquid interface by a nematic film occurs as a two-stage process in which first the nematic phase fills the space between the barriers until an almost planar isotropic -- nematic liquid interface has formed separating the higher-density nematic fluid in the space between the barriers from the lower-density isotropic bulk fluid. In the second stage a nematic film of diverging film thickness develops upon approaching bulk isotropic -- nematic coexistence.

cond-mat.soft↗

arXiv2004

Depletion potential in colloidal mixtures of hard spheres and platelets

The depletion potential between two hard spheres in a solvent of thin hard disclike platelets is investigated by using either the Derjaguin approximation or density functional theory. Particular attention is paid to the density dependence of the depletion potential. A second-order virial approximation is applied, which yields nearly exact results for the bulk properties of the hard-platelet fluid at densities two times smaller than the density of the isotropic fluid at isotropic-nematic phase coexistence. As the platelet density increases, the attractive primary minimum of the depletion potential deepens and an additional small repulsive barrier at larger sphere separations develops. Upon decreasing the ratio of the radius of the spheres and the platelets, the primary minimum diminishes and the position of the small repulsive barrier shifts to smaller values of the sphere separation.

cond-mat.soft↗

arXiv2003

Exactly Solvable Model of Monomer-Monomer Reactions on a Two-Dimensional Random Catalytic Substrate

We present an \textit{exactly solvable} model of a monomer-monomer $A + B \to \emptyset$ reaction on a 2D inhomogeneous, catalytic substrate and study the equilibrium properties of the two-species adsorbate. The substrate contains randomly placed catalytic bonds of mean density $q$ which connect neighboring adsorption sites. The interacting $A$ and $B$ (monomer) species undergo continuous exchanges with corresponding adjacent gaseous reservoirs. A reaction $A + B \to \emptyset$ takes place instantaneously if $A$ and $B$ particles occupy adsorption sites connected by a catalytic bond. We find that for the case of \textit{annealed} disorder in the placement of the catalytic bonds the reaction model under study can be mapped onto the general spin $S = 1$ (GS1) model. Here we concentrate on a particular case in which the model reduces to an exactly solvable Blume-Emery-Griffiths (BEG) model (T. Horiguchi, Phys. Lett. A {\bf 113}, 425 (1986); F.Y. Wu, Phys. Lett. A, {\bf 116}, 245 (1986)) and derive an exact expression for the disorder-averaged equilibrium pressure of the two-species adsorbate. We show that at equal partial vapor pressures of the $A$ and $B$ species this system exhibits a second-order phase transition which reflects a spontaneous symmetry breaking with large fluctuations and progressive coverage of the entire substrate by either one of the species.

cond-mat.mtrl-sci↗

arXiv2003

Model for Spreading of Liquid Monolayers

Manipulating fluids at the nanoscale within networks of channels or chemical lanes is a crucial challenge in developing small scale devices to be used in microreactors or chemical sensors. In this context, ultra-thin (i.e., monolayer) films, experimentally observed in spreading of nano-droplets or upon extraction from reservoirs in capillary rise geometries, represent an extreme limit which is of physical and technological relevance since the dynamics is governed solely by capillary forces. In this work we use kinetic Monte Carlo (KMC) simulations to analyze in detail a simple, but realistic model proposed by Burlatsky \textit{et al.} \cite{Burlatsky_prl96,Oshanin_jml} for the two-dimensional spreading on homogeneous substrates of a fluid monolayer which is extracted from a reservoir. Our simulations confirm the previously predicted time-dependence of the spreading, $X(t \to \infty) = A \sqrt t$, with $X(t)$ as the average position of the advancing edge at time $t$, and they reveal a non-trivial dependence of the prefactor $A$ on the strength $U_0$ of inter-particle attraction and on the fluid density $C_0$ at the reservoir as well as an $U_0$-dependent spatial structure of the density profile of the monolayer. The asymptotic density profile at long time and large spatial scale is carefully analyzed within the continuum limit. We show that including the effect of correlations in an effective manner into the standard mean-field description leads to predictions both for the value of the threshold interaction above which phase segregation occurs and for the density profiles in excellent agreement with KMC simulations results.

cond-mat.mtrl-sci↗

arXiv2003

Bulk and interfacial properties of binary hard-platelet fluids

Interfaces between demixed fluid phases of binary mixtures of hard platelets are investigated using density-functional theory. The corresponding excess free energy functional is calculated within a fundamental measure theory adapted to the Zwanzig model, in which the orientations of the particles of rectangular shape are restricted to three orthogonal orientations. Density and orientational order parameter profiles at interfaces between coexisting phases as well as the interfacial tension are determined. A density inversion, oscillatory density profiles, and a Fisher-Widom line have been found in a mixture of large thin and small thick platelets. The lowest interfacial tension corresponds to the mean bulk orientation of the platelets being parallel to the interface. For a mixture of large and small thin platelets, complete wetting of an isotropic-nematic interface by a second nematic phase is found.

cond-mat.soft↗

arXiv2003

Universality of the thermodynamic Casimir effect

Recently a nonuniversal character of the leading spatial behavior of the thermodynamic Casimir force has been reported [X. S. Chen and V. Dohm, Phys. Rev. E {\bf 66}, 016102 (2002)]. We reconsider the arguments leading to this observation and show that there is no such leading nonuniversal term in systems with short-ranged interactions if one treats properly the effects generated by a sharp momentum cutoff in the Fourier transform of the interaction potential. We also conclude that lattice and continuum models then produce results in mutual agreement independent of the cutoff scheme, contrary to the aforementioned report. All results are consistent with the {\em universal} character of the Casimir force in systems with short-ranged interactions. The effects due to dispersion forces are discussed for systems with periodic or realistic boundary conditions. In contrast to systems with short-ranged interactions, for $L/ξ\gg 1$ one observes leading finite-size contributions governed by power laws in $L$ due to the subleading long-ranged character of the interaction, where $L$ is the finite system size and $ξ$ is the correlation length.

cond-mat.stat-mech↗

arXiv2003

Phase diagram of a model for 3He-4He mixtures in three dimensions

A lattice model of 3He - 4He mixtures which takes into account the continuous rotational symmetry O(2) of the superfluid degrees of freedom of 4He is studied in the molecular-field approximation and by Monte Carlo simulations in three dimensions. In contrast to its two-dimensional version, for reasonable values of the interaction parameters the resulting phase diagram resembles that observed experimentally for 3He - 4He mixtures, for which phase separation occurs as a consequence of the superfluid transition. The corresponding continuum Ginzburg-Landau model with two order parameters describing 3He- 4He mixtures near tricriticality is derived from the considered lattice model. All coupling constants appearing in the continuum model are explicitly expressed in terms of the mean concentration of 4He, the temperature, and the microscopic interaction parameters characterizing the lattice system.

cond-mat.stat-mech↗

arXiv2003

Hard-Sphere Fluids in Contact with Curved Substrates

The properties of a hard-sphere fluid in contact with hard spherical and cylindrical walls are studied. Rosenfeld's density functional theory (DFT) is applied to determine the density profile and surface tension $γ$ for wide ranges of radii of the curved walls and densities of the hard-sphere fluid. Particular attention is paid to investigate the curvature dependence and the possible existence of a contribution to $γ$ that is proportional to the logarithm of the radius of curvature. Moreover, by treating the curved wall as a second component at infinite dilution we provide an analytical expression for the surface tension of a hard-sphere fluid close to arbitrary hard convex walls. The agreement between the analytical expression and DFT is good. Our results show no signs for the existence of a logarithmic term in the curvature dependence of $γ$.

cond-mat.stat-mech↗

arXiv2003

Flow of thin liquid films on chemically structured substrates

Chemically patterned surfaces are of significant interest in the context of microfluidic applications. Miniaturization of such devices will eventually lead to structures on the nano-scale. Whereas on the micron scale purely macroscopic descriptions of liquid flow are valid, on the nanometer scale long-ranged inter-molecular interactions, thermal fluctuations such as capillary waves, and finally the molecular structure of the liquid become important. We discuss the most important conceptual differences between flow on chemically patterned substrates on the micron scale and on the nanometer scale. These concern the structure of the triple line, the type of interactions between neighboring liquid flows, and the influence of the molecular structure of the liquid on the flow. We formulate four design issues for nanofluidics related to channel width, channel separation, and channel bending radius, and conclude with a discussion of the relevance of the conceptual differences between the micron scale and the nanometer scale for these issues.

cond-mat.soft↗

arXiv2003

Depletion potentials near geometrically structured substrates

Using the recently developed so-called White Bear version of Rosenfeld's Fundamental Measure Theory we calculate the depletion potentials between a hard-sphere colloidal particle in a solvent of small hard spheres and simple models of geometrically structured substrates: a right-angled wedge or edge. In the wedge geometry, there is a strong attraction beyond the corresponding one near a planar wall that significantly influences the structure of colloidal suspensions in wedges. In accordance with an experimental study, for the edge geometry we find a free energy barrier of the order of several $k_B T$ which repels a big colloidal particle from the edge.

cond-mat.soft↗

arXiv2003

Equilibrium Properties of A Monomer-Monomer Catalytic Reaction on A One-Dimensional Chain

We study the equilibrium properties of a lattice-gas model of an $A + B \to 0$ catalytic reaction on a one-dimensional chain in contact with a reservoir for the particles. The particles of species $A$ and $B$ are in thermal contact with their vapor phases acting as reservoirs, i.e., they may adsorb onto empty lattice sites and may desorb from the lattice. If adsorbed $A$ and $B$ particles appear at neighboring lattice sites they instantaneously react and both desorb. For this model of a catalytic reaction in the adsorption-controlled limit, we derive analytically the expression of the pressure and present exact results for the mean densities of particles and for the compressibilities of the adsorbate as function of the chemical potentials of the two species.

cond-mat.stat-mech↗

arXiv2002

Wetting and capillary nematization of binary hard-platelet and hard-rod fluids

Density-functional theory is used to investigate the phase behavior of colloidal binary hard-platelet and hard-rod fluids near a single hard wall or confined in a slit pore. The Zwanzig model, in which the orientations of the particles of rectangular shape are restricted to three orthogonal orientations, is analyzed by numerical minimization of the grand potential functional. The density and orientational profiles as well as the surface contributions to the grand potential are determined. The calculations exhibit a wall-induced continuous surface transition from uniaxial to biaxial symmetry for the hard-rod fluid. Complete wetting of the wall -- isotropic liquid interface by a biaxial nematic film for rods and a uniaxial nematic film for platelets is found. For the fluids confined by two parallel hard walls we determine a first-order capillary nematization transition for large slit widths, which terminates in a capillary critical point upon decreasing the slit width.

cond-mat.stat-mech↗

arXiv2002

Critical Casimir Forces in Colloidal Suspensions

Some time ago, Fisher and de Gennes pointed out that long-ranged correlations in a fluid close to its critical point Tc cause distinct forces between immersed colloidal particles which can even lead to flocculation [C. R. Acad. Sc. Paris B 287, 207 (1978)]. Here we calculate such forces between pairs of spherical particles as function of both relevant thermodynamic variables, i.e., the reduced temperature t = (T-Tc)/Tc and the field h conjugate to the order parameter. This provides the basis for specific predictions concerning the phase behavior of a suspension of colloidal particles in a near-critical solvent.

cond-mat.stat-mech↗

arXiv2002

Geometrically-controlled twist transitions in nematic cells

We study geometrically-controlled twist transitions of a nematic confined between a sinusoidal grating and a flat substrate. In these cells the transition to the twisted state is driven by surface effects. We have identified the mechanisms responsible for the transition analytically and used exact numerical calculations to study the range of surface parameters where the twist instability occurs. Close to these values the cell operates under minimal external fields or temperature variations.

cond-mat.soft↗

arXiv2002

Entropic torque

Quantitative predictions are presented of a depletion-induced torque and force acting on a single colloidal hard rod immersed in a solvent of hard spheres close to a planar hard wall. This torque and force, which are entirely of entropic origin, may play an important role for the key-lock principle, where a biological macromolecule (the key) is only functional in a particular orientation with respect to a cavity (the lock).

cond-mat.soft↗

arXiv2001

Polymer depletion interaction between two parallel repulsive walls

The depletion interaction between two parallel repulsive walls confining a dilute solution of long and flexible polymer chains is studied by field-theoretic methods. Special attention is paid to self-avoidance between chain monomers relevant for polymers in a good solvent. Our direct approach avoids the mapping of the actual polymer chains on effective hard or soft spheres. We compare our results with recent Monte Carlo simulations [A. Milchev and K. Binder, Eur. Phys. J. B 3, 477 (1998)] and with experimental results for the depletion interaction between a spherical colloidal particle and a planar wall in a dilute solution of nonionic polymers [D. Rudhardt, C. Bechinger, and P. Leiderer, Phys. Rev. Lett. 81, 1330 (1998)].

cond-mat.soft↗

arXiv2001

Fluids of platelike particles near a hard wall

Fluids consisting of hard platelike particles near a hard wall are investigated using density functional theory. The density and orientational profiles as well as the surface tension and the excess coverage are determined and compared with those of a fluid of rodlike particles. Even for low densities slight orientational packing effects are found for the platelet fluid due to larger intermolecular interactions between platelets as compared with those between rods. A net depletion of platelets near the wall is exhibited by the excess coverage, whereas a change of sign of the excess coverage of hard-rod fluids is found upon increasing the bulk density.

cond-mat.stat-mech↗

arXiv2000

Crystal structures and freezing of dipolar fluids

We investigate the crystal structure of classical systems of spherical particles with an embedded point dipole at T=0. The ferroelectric ground state energy is calculated using generalizations of the Ewald summation technique. Due to the reduced symmetry compared to the nonpolar case the crystals are never strictly cubic. For the Stockmayer (i.e., Lennard-Jones plus dipolar) interaction three phases are found upon increasing the dipole moment: hexagonal, body-centered orthorhombic, and body-centered tetragonal. An even richer phase diagram arises for dipolar soft spheres with a purely repulsive inverse power law potential $\sim r^{-n}$. A crossover between qualitatively different sequences of phases occurs near the exponent $n=12$. The results are applicable to electro- and magnetorheological fluids. In addition to the exact ground state analysis we study freezing of the Stockmayer fluid by density-functional theory.

cond-mat.soft↗