arXiv subjects

Peter Modregger

Publications and source records attributed to Peter Modregger.

16 recordsLinked to original sources

arXiv2025

X-ray Strain and Stress Tensor Tomography

The microscopic distribution of strain and stress plays a crucial role for the performance, safety, and lifetime of components in aeronautics, automotive and critical infrastructure [1]. While non-destructive methods for measuring the stress close to the surface have long been long established, only a limited number of approaches for depth-resolved measurements based on x-rays or neutrons are available [2]. These feature significant limitations, including long scan times, intricate experimental set-ups, limited spatial resolution or anisotropic gauge volumes with aspect ratios of 1:10 or worse. Here, we present a method that overcomes these limitations and obtains tomographic reconstructions of the full six-dimensional strain and stress tensor components. Using a simple and wide spread experimental set-up that combines x-ray powder diffraction with single axis tomography, we achieve non-destructive determination of depth-resolved strain and stress distributions with isotropic resolution. The presented method could be of interest for additive manufacturing of metals [3,4], battery research [5], in-situ metallurgy [6] and the experimental validation of finite element simulations [7].

cond-mat.mtrl-sci↗

arXiv2025

Multi-modal strain mapping of steel crack tips with micrometer spatial resolution

Due to their superior fatigue strength, martensitic steels are the material of choice for high cyclic loading applications such as coil springs. However, crack propagation is influenced by residual stresses and their interaction is poorly understood. In fact, Linear Elastic Fracture Mechanics predicts un-physical singularities in the strain around the crack tip. In this study, we have combined synchrotron-based x-ray diffraction, x-ray fluorescence, and optical microscopy to map the factual strain fields around crack tips with micrometer spatial resolution. X-ray fluorescence and optical images were co-registered to locate the crack in the x-ray diffraction maps. Observed crystal recovery close to cracks confirmed that the diffraction signal originates at least in parts from the cracks. The retrieved local strain field around the crack was further improved by averaging information over carefully selected diffraction peaks. This procedure provided strain maps around crack tips with a spatial resolution of about 1 micro meter and enabled a prediction of further crack growth.

cond-mat.mtrl-sci↗

arXiv2025

3D evolution of protein networks and lipid globules in heat-treated egg yolk

Upon heating, egg yolk transforms from a liquid to a gel due to protein denaturation. This process can serve as a useful model to better understand protein denaturation in general. Using x-ray holographic tomography, we investigated the structural changes in egg yolk during boiling without the need for complex sample fixation or drying. Our results reveal a developing separation between proteins and lipids, with fatty components rapidly aggregating into large globules that subsequently evolve into bubbles.

cond-mat.soft↗

arXiv2025

Ultimate Sensitivity in X-ray Diffraction: Angular Moments vs. Shot Noise

The sensitivity of x-ray diffraction experiments towards Bragg peak parameters constitutes a crucial performance attribute of experimental setups. Frequently, diffraction peaks are characterized by model-free angular moment analysis, which offers a greater versatility compared to traditional model-based peak fitting. Here, we have determined the ultimate sensitivity of angular moments for diffraction data that is limited by photon shot noise. We report experimentally achieved sensitivities of the first moment below $1/1000$th of a detector pixel and below $1\mu$rad. We have demonstrated the validity of our theoretical predictions by an excellent agreement with experimental results from three different setups. The provided formulas for the uncertainties of angular moments allow for the rapid determination of experimentally achieved sensitivities from single diffraction frames.

physics.optics↗

arXiv2024

Parallax in angular sensitive powder diffraction tomography

While a few methods for the determination of depth-resolved strain distributions each with inherent limitations are available, tomographic reconstruction has been applied to this problem in only a limited sense. One of the challenges was the potential impact of geometric parallax, which constitutes a non-negligible lateral offset of diffraction information arising from different sample depths at the detector. Here, the effect of parallax was investigated and two main results have emerged. First, the impact of parallax was found to be additive to other offset contributions, which implies a straightforward correction. Second, for tomographic scans utilizing a full 360{\deg} rotation parallax has been found to have no impact on reconstructions of angular information.

eess.IV↗

arXiv2024

Annular x-ray optics offer superior resolution for radiation sensitive samples

High-resolution x-ray microscopy requires a high photon flux to measure the signal from weakly scattering samples. This exposes samples to high radiation doses, potentially damaging or destroying them through radiation damage. In this work, we propose the use of annular optics in scanning microscopy as an alternative to full-aperture optics. Annular optics act as high-pass filters. Compared to regular optics with the same numerical aperture, annular optics expose the sample to less dose while producing the same signal from small sample features. Annular optics benefit significantly from the high photon fluxes of the latest x-ray sources to compensate for their overall smaller cross section. Using numerical simulations, we show that annular optics offer superior optical performance for sample features close to the resolution limit of the optic.

physics.med-ph↗

arXiv2024

Measurements of dislocations in 4H-SiC with rocking curve imaging

4H Silicon Carbide (4H-SiC) combines many attractive properties such as a high carrier mobility, a wide bandgap, and a high thermal conductivity, making it an ideal candidate for high-power electronic devices. However, a primary challenge in utilizing 4H-SiC is the presence of defects in epitaxial layers, which can significantly degrade device performance. In this study, we have used X-ray transmission topography with a rocking curve imaging technique to characterize the types and distribution of defects in 4H-SiC. The derived maps from the fitted Gaussian parameters were used to investigate dislocations in 4H-SiC. Understanding the distribution of the dislocations provides valuable insights into the overall crystal quality, which can guide improvements for the fabrication processes.

cond-mat.mtrl-sci↗

arXiv2024

Texture tomography with high angular resolution utilizing sparsity

We demonstrate a novel approach to the reconstruction of scanning probe x-ray diffraction tomography data with anisotropic poly crystalline samples. The method involves reconstructing a voxel map containing an orientation distribution function in each voxel of an extended 3D sample. This method differs from existing approaches by not relying on a peak-finding and is therefore applicable to sample systems consisting of small and highly mosaic crystalline domains that are not handled well by existing methods. Samples of interest include bio-minerals and a range of small-graines microstructures common in engineering metals. By choosing a particular kind of basis functions, we can effectively utilize non-negativity in orientation-space for samples with sparse texture. This enables us to achieve stable solutions at high angular resolutions where the problem would otherwise be under determined. We demonstrate the new approach using data from a shot peened martensite sample where we are able to map the twinning micro structure in the interior of a bulk sample without resolving the individual lattice domains. We also demonstrate the approach on a piece of gastropods shell with a mosaic micro structure.

cond-mat.mtrl-sci↗

arXiv2023

Multi-contrast x-ray identification of inhomogeneous materials and their discrimination through deep learning approaches

Recent innovations in x-ray technology (namely phase-based and energy-resolved imaging) offer unprecedented opportunities for material discrimination, however they are often used in isolation or in limited combinations. Here we show that the optimized combination of contrast channels (attenuation at three x-ray energies, ultra-small angle scattering at two, standard deviation of refraction) significantly enhances material identification abilities compared to dual-energy x-ray imaging alone, and that a combination of off-the-shelf machine learning approaches can effectively discriminate e.g., threat materials in complex datasets. The methodology is validated on a range of materials and image dataset that are both an order of magnitude larger than those used in previous studies. Our results can provide an effective methodology to discriminate, and in some cases identify, different materials in complex imaging scenarios, with prospective applications across the life and physical sciences. While the detection of threat materials is used as a demonstrator here, the methodology could be equally applied to e.g., the distinction between diseased and healthy tissues or degraded vs. pristine materials.

physics.app-ph↗

arXiv2022

Object Initialization For Ptychographic Scans With Reduced Overlap

X-ray ptychography utilizes overlapping illuminations to reconstruct the object's phase and absorption signal with spatial resolutions much smaller than the focus size. Usually, the illumination overlap is chosen to be between 50% and 60% in order to ensure high quality reconstructions at reasonable scan times and/or doses. Here, we experimentally demonstrate that ptychographic iteration with object instead of flat initialization allows for a significant reduction of the overlap with only a modest loss in reconstruction quality. This approach could prove beneficial for dose sensitive experiments and for rapid feedback overview scans.

cond-mat.mtrl-sci↗

arXiv2022

Defect detection in glass fabric reinforced thermoplastics by laboratory-based X-ray scattering

Glass fabric reinforced thermoplastic (GFRT) constitutes a class of composite materials that are especially suited for automobile construction due to their combination of low weight, ease of production and mechanical properties. However, in the manufacturing process, during forming of prefabricated laminates, defects in the glass fabric as well as in the polymer matrix can occur, which may compromise the safety or the lifetime of components. Thus, the detection of defects in GFRTs for production monitoring and a deep understanding of defect formation/evolution is essential for mass production. Here, we experimentally demonstrate that a certain type of defects (i.e., local fiber shifts), can be detected reliably by X-ray scattering based on the edge-illumination principle.

cond-mat.mtrl-sci↗

arXiv2022

Ptychographic reconstruction with wavefront initialization

X-ray ptychography is a cutting edge imaging technique providing ultra-high spatial resolutions. In ptychography, phase retrieval, i.e., the recovery of a complex valued signal from intensity-only measurements, is enabled by exploiting a redundancy of information contained in diffraction patterns measured with overlapping illuminations. For samples that are considerably larger than the probe we show that during the iteration the bulk information has to propagate from the sample edges to the center. This constitutes an inherent limitation of reconstruction speed for algorithms that use a flat initialization. Here, we experimentally demonstrate that a considerable improvement of computational speed can be achieved by utilizing a low resolution sample wavefront retrieved from measured diffraction patterns as initialization. In addition, we show that this approach avoids phase singularity artifacts due to strong phase gradients. Wavefront initialization is computationally fast and compatible with non-bulky samples. Therefore, the presented approach is readily adaptable with established ptychographic reconstruction algorithms implying a wide spread use.

eess.IV↗

arXiv2022

The diffraction volume for square-shaped samples in X-ray diffraction with high spatial resolution

X-ray diffraction with high spatial resolution is a prerequisite for the characterization of (poly)-crystalline materials on micro- or nanoscopic scales. This can be achieved by utilizing a focused X-ray beam and scanning of the sample. However, due to the penetration of the X-rays into the material, the exact location of diffraction within the sample is ambiguous. Here, we utilize numerical simulations to compute the spatially resolved diffraction volume in order to investigate these ambiguities. We demonstrate that partial depth sensitivity can be achieved by rotating the sample.

cond-mat.mtrl-sci↗

arXiv2022

Calibration of scanning acoustic microscopy for the differentiation between unstable and stable atherosclerotic plaques by X-ray fluorescence imaging

Although cardiovascular diseases are the leading cause of death globally, non-invasive and inexpensive diagnostic tools for the identification of associated unstable atherosclerotic plaques are not yet available. Scanning acoustic microscopy offers a high potential to fill this critical gap in patient care. However, convincing validation and calibration of this technique requires high resolution maps of Ca concentrations of atherosclerotic plaques. Here, we demonstrate that synchrotron radiation-based X-ray fluorescence imaging with micrometer spatial resolution can provide such a gold standard.

cond-mat.soft↗

arXiv2022

Accelerated iterative tomographic reconstruction with x-ray edge illumination

Compared to standard tomographic reconstruction, iterative approaches offer the possibility to account for extraneous experimental influences, which allows for a suppression of related artifacts. However, the inclusion of corresponding parameters in the iterative forward model typically leads to longer computation times. Here, we demonstrate experimentally for phase sensitive X-ray imaging based on the edge illumination principle that inadequately sampled illumination curves result in ring artifacts in tomographic reconstructions. We take advantage of appropriately sampled illumination curves instead, which enables us to eliminate the corresponding parameter from the forward model and substantially increase computational speed. In addition, we demonstrate a 30\% improvement in spatial resolution of the iterative approach compared with the standard non-iterative single shot approach. Further, we report on several significant improvements in our numerical implementation of the iterative approach, which we make available online with this publication. Finally, we show that the combination of both experimental and algorithmic advancement lead to a total speed increase by one order of magnitude and an improved contrast to noise ratio in the reconstructions.

eess.IV↗

arXiv2014

Simultaneous submicrometric 3D imaging of the micro-vascular network and the neuronal system in a mouse spinal cord

Defaults in vascular (VN) and neuronal networks of spinal cord are responsible for serious neurodegenerative pathologies. Because of inadequate investigation tools, the lacking knowledge of the complete fine structure of VN and neuronal systems is a crucial problem. Conventional 2D imaging yields incomplete spatial coverage leading to possible data misinterpretation, whereas standard 3D computed tomography imaging achieves insufficient resolution and contrast. We show that X-ray high-resolution phase-contrast tomography allows the simultaneous visualization of three-dimensional VN and neuronal systems of mouse spinal cord at scales spanning from millimeters to hundreds of nanometers, with neither contrast agent nor a destructive sample-preparation. We image both the 3D distribution of micro-capillary network and the micrometric nerve fibers, axon-bundles and neuron soma. Our approach is a crucial tool for pre-clinical investigation of neurodegenerative pathologies and spinal-cord-injuries. In particular, it should be an optimal tool to resolve the entangled relationship between VN and neuronal system.

physics.med-ph↗