arXiv subjects

Pengyu Ren

Publications and source records attributed to Pengyu Ren.

14 recordsLinked to original sources

arXiv2026

Hosting Capacity Assessment of Data Centers with Voltage Ride-Through Capability in Power Systems

Large data centers are emerging as concentrated, power-electronic grid loads whose abrupt disconnection or transfer to on-site backup supply during voltage disturbances can remove large demand from the power system, and may create a system-level stability problem. Their interconnection feasibility therefore depends not only on steady-state thermal and voltage limits, but also on whether internal power-conditioning systems can maintain IT service while limiting customer-initiated load reduction. This paper presents a voltage ride-through (VRT)-aware data center and grid co-planning framework that couples transmission-level fault simulation with an internal data center ride-through model. Python-based dynamic simulations generate point-of-interconnection (POI) voltage trajectories under selected network faults, and the resulting waveforms drive an internal model incorporating IT and cooling-load dynamics, DC-link, Uninterruptible Power Supply (UPS) response, and converter apparent power limits. The IEEE 118-bus case study shows that internal VRT capability can become a binding interconnection constraint: steady-state planning alone can overestimate feasible data center capacity, whereas increased UPS converter headroom progressively restores hosting capacity. Under the reduced-order response models studied, the grid-forming mode provides greater ride-through margin than the current-limited grid-following mode under the same network fault conditions. The results further show that VRT constraints can materially change both the total hosting capacity of data centers and its spatial allocation across candidate interconnection buses.

eess.SY↗

arXiv2026

PolySim: Deterministic Polynomial Surrogates for Cross-Modal Retrieval on CiM

Cross-modal retrieval on edge devices benefits from probabilistic embeddings that capture semantic uncertainty, but deploying them on compute-in-memory (CiM) hardware remains an open problem. The core difficulty is a sampling gap: probabilistic methods such as PCME rely on Monte Carlo sampling and nonlinear distance evaluation at inference, which are fundamentally incompatible with CiM crossbar arrays that support only deterministic, single-step matrix-vector multiplication. Few existing probabilistic retrieval methods can be executed on a conventional crossbar. To bridge this gap, we propose PolySim, a framework that reformulates probabilistic retrieval into a fully deterministic pipeline. PolySim approximates each Gaussian embedding dimension using low-order polynomial bases and computes similarity via a learnable order-bilinear kernel, eliminating stochastic sampling while preserving distributional information. In experiments on six benchmarks spanning video, image, and audio retrieval, PolySim improves R@1 over deterministic baselines by up to 10.3\% and matches or exceeds PCME, while reducing inference to a single crossbar-compatible matrix-vector multiplication. CrossSim evaluation under realistic device non-idealities confirms robust deployment on conventional crossbar arrays. To the best of our knowledge, PolySim is the first method to enable probabilistic cross-modal retrieval on CiM hardware.

cs.ET↗

arXiv2026

A 65 nm Trustworthy Hypoglycemia Forecasting Engine Achieving 11.3 nJ per Inference

Diabetes affects millions of people and requires reliable continuous glucose monitoring for early hypoglycemia warning. However, medical AI systems must be not only accurate and energy efficient, but also explainable, noise robust, and uncertainty aware. This work presents a 65 nm hypoglycemia forecasting engine based on probabilistic decision trees for trustworthy medical inference. The proposed hybrid architecture combines exact arithmetic evaluation for shallow tree layers with sampling based inference for deeper layers, reducing soft decision tree complexity from exponential to sample efficient traversal. A reconfigurable 4 by 24 by 24 probabilistic node array supports arbitrary tree structures with a maximum depth of 12, coordinated by an on chip low power RISC V core. Fabricated in 65 nm CMOS, the chip achieves 11.3 nJ per inference and a state of the art 30 min forecasting F1 score of 0.825 on continuous glucose monitoring data. Compared with conventional decision tree and random forest models, the proposed engine improves robustness to sensor noise and data point drop off by 4.1x to 16.1x. These results demonstrate an energy efficient, explainable, and uncertainty aware edge AI engine for trustworthy hypoglycemia forecasting.

cs.AR↗

arXiv2026

Uncertainty-Guided Dual-Domain Learning for Reliable Skin Lesion Segmentation

Accurate skin lesion segmentation is vital for dermoscopic Computer-Aided Diagnosis. However, visual ambiguity and morphological irregularity often defeat spatial modeling, necessitating multi-domain architectures. Existing paradigms frequently overlook the active use of prediction uncertainty, leading to deterministic frameworks that suffer from blind cross-domain fusion and overfit to label noise. To address these issues, we propose the Uncertainty-Guided Dual-Domain Network (UGDD-Net). UGDD-Net introduces a novel "Glance-and-Gaze" mechanism to transform uncertainty into an active guiding signal. Specifically, the Uncertainty-Guided Bi-directional Feature Fusion (UGBFF) module uses pixel-level uncertainty to modulate spatial-spectral interactions. The Uncertainty-Guided Graph Refinement (UGGR) module constructs a topology-aware graph to propagate reliable semantic consensus and refine uncertain nodes. Finally, the Uncertainty-Guided Margin-Adaptive Loss (UGML) enforces strict constraints on confident pixels while relaxing penalties on uncertain ones to improve statistical calibration. Extensive experiments on ISIC2017, ISIC2018, PH2, and HAM10000 datasets demonstrate that UGDD-Net achieves state-of-the-art performance, especially on "Hard Samples". Our uncertainty maps align with expert inter-observer variability, providing robust interpretability for human-machine collaborative diagnosis.

eess.IV↗

arXiv2026

Probabilistic Tree Inference Enabled by FDSOI Ferroelectric FETs

Artificial intelligence applications in autonomous driving, medical diagnostics, and financial systems increasingly demand machine learning models that can provide robust uncertainty quantification, interpretability, and noise resilience. Bayesian decision trees (BDTs) are attractive for these tasks because they combine probabilistic reasoning, interpretable decision-making, and robustness to noise. However, existing hardware implementations of BDTs based on CPUs and GPUs are limited by memory bottlenecks and irregular processing patterns, while multi-platform solutions exploiting analog content-addressable memory (ACAM) and Gaussian random number generators (GRNGs) introduce integration complexity and energy overheads. Here we report a monolithic FDSOI-FeFET hardware platform that natively supports both ACAM and GRNG functionalities. The ferroelectric polarization of FeFETs enables compact, energy-efficient multi-bit storage for ACAM, and band-to-band tunneling in the gate-to-drain overlap region and subsequent hole storage in the floating body provides a high-quality entropy source for GRNG. System-level evaluations demonstrate that the proposed architecture provides robust uncertainty estimation, interpretability, and noise tolerance with high energy efficiency. Under both dataset noise and device variations, it achieves over 40% higher classification accuracy on MNIST compared to conventional decision trees. Moreover, it delivers more than two orders of magnitude speedup over CPU and GPU baselines and over four orders of magnitude improvement in energy efficiency, making it a scalable solution for deploying BDTs in resource-constrained and safety-critical environments.

cs.ET↗

arXiv2025

Grid Frequency Stability Support Potential of Data Center: A Quantitative Assessment of Flexibility

The rapid expansion of data center infrastructure is reshaping power system dynamics by significantly increasing electricity demand while also offering potential for fast and controllable flexibility. To ensure reliable operation under such conditions, the frequency secured unit commitment problem must be solved with enhanced modeling of demand side frequency response. In this work, we propose a data-driven linearization framework based on decision tree based constraint learning to embed nonlinear nadir frequency constraints into mixed-integer linear programming. This approach enables tractable optimization of generation schedules and fast frequency response from data centers. Through case studies on both a benchmark system and a 2030 future scenario with higher DC penetration, we demonstrate that increasing the proportion of flexible DC load consistently improves system cost efficiency and supports renewable integration. However, this benefit exhibits diminishing marginal returns, motivating the introduction of the Marginal Flexibility Value metric to quantify the economic value of additional flexibility. The results highlight that as DCs become a larger share of system load, their active participation in frequency response will be increasingly indispensable for maintaining both economic and secure system operations.

eess.SY↗

arXiv2025

XMUspeech Systems for the ASVspoof 5 Challenge

In this paper, we present our submitted XMUspeech systems to the speech deepfake detection track of the ASVspoof 5 Challenge. Compared to previous challenges, the audio duration in ASVspoof 5 database has significantly increased. And we observed that merely adjusting the input audio length can substantially improve system performance. To capture artifacts at multiple levels, we explored the performance of AASIST, HM-Conformer, Hubert, and Wav2vec2 with various input features and loss functions. Specifically, in order to obtain artifact-related information, we trained self-supervised models on the dataset containing spoofing utterances as the feature extractors. And we applied an adaptive multi-scale feature fusion (AMFF) method to integrate features from multiple Transformer layers with the hand-crafted feature to enhance the detection capability. In addition, we conducted extensive experiments on one-class loss functions and provided optimized configurations to better align with the anti-spoofing task. Our fusion system achieved a minDCF of 0.4783 and an EER of 20.45% in the closed condition, and a minDCF of 0.2245 and an EER of 9.36% in the open condition.

cs.SD↗

arXiv2025

ReFlow-VC: Zero-shot Voice Conversion Based on Rectified Flow and Speaker Feature Optimization

In recent years, diffusion-based generative models have demonstrated remarkable performance in speech conversion, including Denoising Diffusion Probabilistic Models (DDPM) and others. However, the advantages of these models come at the cost of requiring a large number of sampling steps. This limitation hinders their practical application in real-world scenarios. In this paper, we introduce ReFlow-VC, a novel high-fidelity speech conversion method based on rectified flow. Specifically, ReFlow-VC is an Ordinary Differential Equation (ODE) model that transforms a Gaussian distribution to the true Mel-spectrogram distribution along the most direct path. Furthermore, we propose a modeling approach that optimizes speaker features by utilizing both content and pitch information, allowing speaker features to reflect the properties of the current speech more accurately. Experimental results show that ReFlow-VC performs exceptionally well in small datasets and zero-shot scenarios.

cs.SD↗

arXiv2025

The need to implement FAIR principles in biomolecular simulations

This letter illustrates the opinion of the molecular dynamics (MD) community on the need to adopt a new FAIR paradigm for the use of molecular simulations. It highlights the necessity of a collaborative effort to create, establish, and sustain a database that allows findability, accessibility, interoperability, and reusability of molecular dynamics simulation data. Such a development would democratize the field and significantly improve the impact of MD simulations on life science research. This will transform our working paradigm, pushing the field to a new frontier. We invite you to support our initiative at the MDDB community (https://mddbr.eu/community/) Now published as: Amaro, R.E., et al. The need to implement FAIR principles in biomolecular simulations. Nat Methods (2025) https://doi.org/10.1038/s41592-025-02635-0

q-bio.BM↗

arXiv2024

NVCiM-PT: An NVCiM-assisted Prompt Tuning Framework for Edge LLMs

Large Language Models (LLMs) deployed on edge devices, known as edge LLMs, need to continuously fine-tune their model parameters from user-generated data under limited resource constraints. However, most existing learning methods are not applicable for edge LLMs because of their reliance on high resources and low learning capacity. Prompt tuning (PT) has recently emerged as an effective fine-tuning method for edge LLMs by only modifying a small portion of LLM parameters, but it suffers from user domain shifts, resulting in repetitive training and losing resource efficiency. Conventional techniques to address domain shift issues often involve complex neural networks and sophisticated training, which are incompatible for PT for edge LLMs. Therefore, an open research question is how to address domain shift issues for edge LLMs with limited resources. In this paper, we propose a prompt tuning framework for edge LLMs, exploiting the benefits offered by non-volatile computing-in-memory (NVCiM) architectures. We introduce a novel NVCiM-assisted PT framework, where we narrow down the core operations to matrix-matrix multiplication, which can then be accelerated by performing in-situ computation on NVCiM. To the best of our knowledge, this is the first work employing NVCiM to improve the edge LLM PT performance.

cs.LG↗

arXiv2022

Scalable Hybrid Deep Neural Networks/Polarizable Potentials Biomolecular Simulations including long-range effects

Deep-HP is a scalable extension of the \TinkerHP\ multi-GPUs molecular dynamics (MD) package enabling the use of Pytorch/TensorFlow Deep Neural Networks (DNNs) models. Deep-HP increases DNNs MD capabilities by orders of magnitude offering access to ns simulations for 100k-atom biosystems while offering the possibility of coupling DNNs to any classical (FFs) and many-body polarizable (PFFs) force fields. It allows therefore to introduce the ANI-2X/AMOEBA hybrid polarizable potential designed for ligand binding studies where solvent-solvent and solvent-solute interactions are computed with the AMOEBA PFF while solute-solute ones are computed by the ANI-2x DNN. ANI-2X/AMOEBA explicitly includes AMOEBA's physical long-range interactions via an efficient Particle Mesh Ewald implementation while preserving ANI-2X's solute short-range quantum mechanical accuracy. The DNNs/PFFs partition can be user-defined allowing for hybrid simulations to include biosimulation key ingredients such as polarizable solvents, polarizable counter ions, etc... ANI-2X/AMOEBA is accelerated using a multiple-timestep strategy focusing on the models contributions to low-frequency modes of nuclear forces. It primarily evaluates AMOEBA forces while including ANI-2x ones only via correction-steps resulting in an order of magnitude acceleration over standard Velocity Verlet integration. Simulating more than 10 $μ$, we compute charged/uncharged ligands solvation free energies in 4 solvents, and absolute binding free energies of host-guest complexes from SAMPL challenges. ANI-2X/AMOEBA average errors are within chemical accuracy opening the path towards large-scale hybrid DNNs simulations, at force-field cost, in biophysics and drug discovery.

physics.chem-ph↗

arXiv2022

Development of the Quantum Inspired SIBFA Many-Body Polarizable Force Field: Enabling Condensed Phase Molecular Dynamics Simulations

We present the extension of the SIBFA (Sum of Interactions Between Fragments Ab initio Computed many-body polarizable force field to condensed phase Molecular Dynamics (MD) simulations. The Quantum-Inspired SIBFA procedure is grounded on simplified integrals obtained from localized molecular orbital theory and achieves full separability of its intermolecular potential. It embodies long-range multipolar electrostatics (up to quadrupole) coupled to a short-range penetration correction (up to charge-quadrupole), exchange-repulsion, many-body polarization, many-body charge transfer/delocalization, exchange-dispersion and dispersion (up to C10). This enables the reproduction of all energy contributions of ab initio Symmetry-Adapted Perturbation Theory (SAPT(DFT)) gas phase reference computations. The SIBFA approach has been integrated within the Tinker-HP massively parallel MD package. To do so all SIBFA energy gradients have been derived and the approach has been extended to enable periodic boundary conditions simulations using Smooth Particle Mesh Ewald. This novel implementation also notably includes a computationally tractable simplification of the many-body charge transfer/delocalization contribution. As a proof of concept, we perform a first computational experiment defining a water model fitted on a limited set of (SAPT(DFT)) data. SIBFA is shown to enable a satisfactory reproduction of both gas phase energetic contributions and condensed phase properties highlighting the importance of its physically-motivated functional form.

physics.chem-ph↗

arXiv2021

Raising the Performance of the Tinker-HP Molecular Modeling Package [Article v1.0]

This living paper reviews the present High Performance Computing (HPC) capabilities of the Tinker-HP molecular modeling package. We focus here on the reference, double precision, massively parallel molecular dynamics engine present in Tinker-HP and dedicated to perform large scale simulations. We show how it can be adapted to recent Intel Central Processing Unit (CPU) petascale architectures. First, we discuss the new set of Intel Advanced Vector Extensions 512 (Intel AVX-512) instructions present in recent Intel processors (e.g., the Intel Xeon Scalable and Intel Xeon Phi 2nd generation processors) allowing for larger vectorization enhancements. These instructions constitute the central source of potential computational gains when using the latest processors, justifying important vectorization efforts for developers. We then briefly review the organization of the Tinker-HP code and identify the computational hotspots which require Intel AVX-512 optimization and we propose a general and optimal strategy to vectorize those particular parts of the code. We intended to present our optimization strategy in a pedagogical way so it could benefit to other researchers and students interested in gaining performances in their own software. Finally we present the performance enhancements obtained compared to the unoptimized code both sequentially and at the scaling limit in parallel for classical non-polarizable (CHARMM) and polarizable force fields (AMOEBA). This paper never ceases to be updated as we accumulate new data on the associated Github repository between new versions of this living paper.

cs.MS↗

arXiv2021

Tinker-HP : Accelerating Molecular Dynamics Simulations of Large Complex Systems with Advanced Point Dipole Polarizable Force Fields using GPUs and Multi-GPUs systems

We present the extension of the Tinker-HP package (Lagardère et al., Chem. Sci., 2018,9, 956-972) to the use of Graphics Processing Unit (GPU) cards to accelerate molecular dynamics simulations using polarizable many-body force fields. The new high-performance module allows for an efficient use of single- and multi-GPU architectures ranging from research laboratories to modern supercomputer centers. After detailing an analysis of our general scalable strategy that relies on OpenACC and CUDA, we discuss the various capabilities of the package. Among them, the multi-precision possibilities of the code are discussed. If an efficient double precision implementation is provided to preserve the possibility of fast reference computations, we show that a lower precision arithmetic is preferred providing a similar accuracy for molecular dynamics while exhibiting superior performances. As Tinker-HP is mainly dedicated to accelerate simulations using new generation point dipole polarizable force field, we focus our study on the implementation of the AMOEBA model. Testing various NVIDIA platforms including 2080Ti, 3090, V100 and A100 cards, we provide illustrative benchmarks of the code for single- and multi-cards simulations on large biosystems encompassing up to millions of atoms. The new code strongly reduces time to solution and offers the best performances to date obtained using the AMOEBA polarizable force field. Perspectives toward the strong-scaling performance of our multi-node massive parallelization strategy, unsupervised adaptive sampling and large scale applicability of the Tinker-HP code in biophysics are discussed. The present software has been released in phase advance on GitHub in link with the High Performance Computing community COVID-19 research efforts and is free for Academics (see https://github.com/TinkerTools/tinker-hp).

physics.comp-ph↗