arXiv Science⌕ Search

arXiv subjects

Pavan Nukala

Publications and source records attributed to Pavan Nukala.

At least 19 recordsLinked to original sources

Landau-like formalism for the thermal-runaway and filamentation instabilities in switching Mott devices

Correlated oxides can switch to a low-resistance state when exposed to a voltage, making these insulator-to-metal transition materials promising candidates for memristor technology. Switching in materials such as VO2 occurs because of a thermal-runaway instability that leads to the abrupt formation of a hot current-carrying metallic filament within the insulator. We study, theoretically and experimentally, this bias-induced switching as a non-linear dynamics stability problem. We construct Landau free energy-like Lyapunov functions to show that both the on-state ("set") and the off-state ("reset") transitions can be described as separate saddle-node bifurcations. Starting from the reaction-diffusion equation for the heat transport, the abrupt snap-back (reset) to the insulating state is systematically formulated as a mean field Landau-like dynamics with the filament width playing the role of the order parameter. The formulation predicts an abrupt first-order phase transition with a break-off of a finite width filament across the current-controlled reset transition. The formulation is quantitatively compared against our electrical and optical microscopy experiments on VO2 thin film devices. Multi-cycle switching dynamics experiments further reveal the emergence of a stable stochastic regime following an initial electro-spatial forming phase. Beyond establishing a cross-disciplinary dynamical framework that may be readily compared to instabilities in various reaction-diffusion scenarios, the work also provides a predictive foundation for the rational design and optimization of Mott-transition-based technologies.

cond-mat.mtrl-sci↗

Nature of the 175-180 cm$^{-1}$ Raman Feature in Altermagnetic $α$-MnTe

The 175 cm$^{-1}$ Raman mode in $α$-MnTe has long been assigned to the material's only symmetry-allowed phonon ($E_{2g}$), yet first-principles calculations consistently place this mode below 100 cm$^{-1}$. Recent works have offered three competing explanations for the discrepancy: a weak symmetry-lowering ($D_{6h}\rightarrow D_{3h}$) phonon, an electronic plasmon arising from intrinsic hole self-doping, or an extrinsic MnTe$_2$ impurity signature. Here we resolve this controversy using stoichiometry-controlled molecular beam epitaxy (MBE). We deliberately vary the fraction of pyrite-type MnTe$_2$ secondary phase relative to the $α$-MnTe matrix. Across this series, the 175 cm$^{-1}$ mode tracks the presence of MnTe$_2$ essentially one-to-one -- present wherever MnTe$_2$ is detectable, absent in stoichiometric, single-phase $α$-MnTe at nominal LASER powers. When LASER power is ramped up, an additional mode emerges in MnTe as well positioned close to $\approx$ 175 cm$^{-1}$; our detailed temperatures dependendent Raman analysis identifies the LASER power scorched region close to a distorted MnTe phase, confirmed via transmission electron microscopy. This direct, growth-controlled correlation identifies the mode as an extrinsic MnTe$_2$ impurity signature or as a distorted MnTe feature, rather than an intrinsic phonon or plasmon feature, providing a practical diagnostic for phase purity in MBE-grown $α$-MnTe and clarifying which Raman features can be reliably attributed to the intrinsic altermagnetic phase.

cond-mat.mtrl-sci↗

Operando Surface Probe Microscopy Reveals Electrochemical Origins of Reliability Variability in Hafnia Ferroelectrics

Device-to-device and sample-to-sample variability remains a major obstacle to the reliable implementation of hafnia-based ferroelectrics, even in nominally identical structures fabricated under similar processing conditions. This highlights the need for operando diagnostic probes that provide process-relevant feedback beyond conventional structural phase analysis. Here, we demonstrate that operando nanoscale surface measurements serve as sensitive probe of the local electrochemical processes governing reliability in hafnia ferroelectric devices. Using epitaxial rhombohedral Y:HfO2 films grown on La0.67Sr0.33MnO3 (LSMO)-buffered SrTiO3 as a model system, we combine operando atomic force microscopy, conductive AFM, piezoresponse force microscopy, and correlative STEM-EELS to directly link surface evolution with interfacial electrochemistry. Devices exhibiting wake-up show a spatially uniform increase in surface height, arising from homogeneous oxidation of the LSMO electrode followed by oxygen migration into the ferroelectric layer during polarization switching. In contrast, leaky devices display pronounced surface roughening and blister formation, originating from spatially inhomogeneous oxidation states in the pristine LSMO electrode that promote competing oxygen evolution reactions at the LSMO/Y:HfO2 interface. The accompanying electron generation produces leakage which is transient. Guided by these mechanistic insights, we introduce simple modifications to the processing conditions, without altering the optimized ferroelectric phase, that suppress the competing electrochemical pathways and reproducibly yield 100% ferroelectric devices. More broadly, this work establishes operando surface evolution as a powerful nanoscale diagnostic of hidden electrochemical processes and provides a practical route for improving the reliability and reproducibility of hafnia-based ferroelectric devices.

cond-mat.mtrl-sci↗

Interplay of spin-lattice and electronic coupling far above Neel ordering in 2D antiferromagnetic CrPS4 and its interface manifestation

A short-range spin correlation driven, strongly intercoupled spin-phonon-electronic state far above TN (~38K) is identified in the low dimensional van der Waals antiferromagnet CrPS4. Temperature-dependent Raman spectroscopy reveals spin-phonon coupling persisting up to T*~120K, concomitant with local lattice distortion. The setting of vibronic progression in photoluminescence spectra suggests the strengthening of electron-phonon coupling around T*. Furthermore, both the electrical transport and optoelectronic response also change significantly at T*. The results indicate that spin-phonon coupling above TN in CrPS4 originates from local lattice distortion induced by short range magnetic correlations which in turn enhances the electron-phonon interaction. Furthermore, using a CrPS4/In2Se3 heterostructure, we demonstrate that the anomaly associated with the coupled degrees of freedom in CrPS4 also influences the adjacent In2Se3 layer. The lattice dynamics of In2Se3 is significantly modified across the magnetic anomaly of CrPS4, and the coupled dynamics is observed at T*. These interfacial manifestation opens up new possibilities for achieving correlated multifunctionalities in artificially designed heterostructure.

cond-mat.mtrl-sci↗

Berry Curvature Driven Transport in Silicon-Compatible Altermagnetic $α$-MnTe Thin Films

Integrating spin-dependent functionality with mainstream semiconductor technology is a central goal of modern spintronics, yet most candidate materials remain incompatible with silicon-based platforms. Here, we report the direct epitaxial integration of $α$-MnTe thin films on Si(111) via molecular beam epitaxy and demonstrate a robust anomalous Hall effect (AHE) in this silicon-compatible altermagnetic system. Despite the absence of net bulk magnetization, the films exhibit a pronounced hysteretic Hall response, providing transport evidence consistent with finite Berry curvature generated by symmetry breaking in the thin-film geometry. High-resolution structural and spectroscopic characterization confirms phase-pure, epitaxial growth with hexagonal NiAs-type symmetry, while magnetotransport measurements reveal correlated hysteresis in both transverse and longitudinal channels with systematic temperature evolution. First-principles calculations reveal substantial uncompensated Berry curvature arising from the spin-split band structure, consistent with altermagnetic symmetry and the origin of the observed Hall response. These results establish MnTe/Si(111) as a silicon-compatible altermagnetic platform and chart a concrete pathway for embedding Berry-phase-driven functionalities into scalable semiconductor device architectures.

cond-mat.mtrl-sci↗

Large Pyroelectric Enhancement in Freestanding Epitaxial BaTiO3 Membranes on Si

Ferroelectric membranes transferred onto arbitrary substrates provide reduced mechanical clamping at the interfaces that can diminish the effective polarization-rotation barrier offering a pathway to engineer larger electromechanical and thermally driven responses in oxide electronics. Here, we report integration of single crystalline thin film BaTiO3 (BTO) ferroelectric membrane on Si and demonstrate a 4x at 30C and 34x at 60C enhancement of pyroelectric coefficient compared to clamped films. The BTO membrane is grown epitaxially on a water-soluble Sr3Al2O6 sacrificial layer, released by selective dissolution, and transferred onto Si, yielding a strain-relaxed membrane with robust intrinsic polarization. Temperature dependent piezoresponse force microscopy (PFM) reveals pronounced thermally driven evolution of domain orientation, consistent with reduced barriers for dipolar modulation in the freestanding state. Variable-temperature Kelvin probe force microscopy (KPFM) quantifies an effective pyroelectric coefficient of ~75 uC/m^2K at 30C and 450 uC/m^2K at 60C with a detectivity of 40 m^2K^-1at room temperature. These results establish lead-free freestanding BTO membranes as a promising silicon-integrable platform for cryogen-free infrared detection and waste-heat energy management.

cond-mat.mtrl-sci↗

Anion Doping Driven Non-Ferroelectric-to-Ferroelectric Phase Transition in Epitaxial Y:HfO2

Oxygen vacancies are often essential for stabilizing the orthorhombic ferroelectric phase in HfO2, with cationic doping widely employed to introduce such defects. In contrast, systematic studies on anionic doping to induce ferroelectricity remains largely in nascent stages. Here, using epitaxial Y:HfO2 films grown on ITO-buffered YSZ substrates that initially crystallize predominantly in the monoclinic non-polar phase, we demonstrate that post-deposition rapid thermal annealing in N2 atmosphere at 900 °C enables nitrogen incorporation without disrupting epitaxy. As the annealing duration increases from 10 s to 2 min, the monoclinic phase diminishes, accompanied by the emergence of robust ferroelectric hysteresis and a corresponding increase in the orthorhombic phase fraction. Combining independent spectroscopic and compositional analyses, we experimentally establish that nitrogen preferentially incorporates into pre-existing neutral oxygen-vacancy sites, converting them into charged oxygen vacancies that drive the transformation from the non-polar monoclinic phase to the ferroelectric orthorhombic phase. Our epitaxial model platform therefore reveals an anion-mediated defect-engineering pathway for controlling ferroelectricity in Y:HfO2, establishing nitrogen incorporation not merely as a chemical dopant, but as a route to fundamentally reconfigure the defect thermodynamics governing phase stability in fluorite ferroelectrics.

cond-mat.mtrl-sci↗

Room-Temperature Electric-Field Control of Anomalous Hall Effect in Py/BTO/LSMO Heterostructures

We demonstrate room temperature electric field control of the anomalous Hall effect in epitaxial Ni80Fe20 (Py) BaTiO3 (BTO) La0.7Sr0.3MnO3 (LSMO) thin film heterostructures grown on MgO and LaAlO3 substrates. Substrate induced strain states generate distinct magnetic anisotropies, enabling voltage driven tuning between anomalous and topological Hall contributions. Robust ferroelectric polarization in BTO, confirmed by piezoresponse force microscopy, couples strongly to interfacial orbital reconstruction and carrier redistribution. As a result, Hall resistivity exhibits giant low voltage tunability, with up to nearly 93 percent modulation at operating voltages of only 0.5 tand 2 V. Density functional theory calculations further reveal polarization controlled Rashba spin splitting, establishing a direct link between ferroelectric order and emergent quantum transport. These findings establish Py/BTO/LSMO heterostructures as promising candidates for low-power multifunctional spintronic devices, where substrate engineering enables control over emergent quantum transport phenomena.

cond-mat.mtrl-sci↗

Interfacial and bulk switching MoS2 memristors for an all-2D reservoir computing framework

In this study, we design a reservoir computing (RC) network by exploiting short- and long-term memory dynamics in Au/Ti/MoS$_2$/Au memristive devices. The temporal dynamics is engineered by controlling the thickness of the Chemical Vapor Deposited (CVD) MoS$_2$ films. Devices with a monolayer (1L)-MoS$_2$ film exhibit volatile (short-term memory) switching dynamics. We also report non-volatile resistance switching with excellent uniformity and analog behavior in conductance tuning for the multilayer (ML) MoS$_2$ memristive devices. We correlate this performance with trap-assisted space-charge limited conduction (SCLC) mechanism, leading to a bulk-limited resistance switching behavior. Four-bit reservoir states are generated using volatile memristors. The readout layer is implemented with an array of nonvolatile synapses. This small RC network achieves 89.56\% precision in a spoken-digit recognition task and is also used to analyze a nonlinear time series equation.

cs.ET↗

Field-induced reversible phase transition and negative differential resistance in In2Se3 ferroelectric semiconducting FETs

Indium selenide (In2Se3), a ferroelectric semiconductor, offers a unique platform for multifunctional nanoelectronics owing to the interplay between polarization dynamics, interlayer sliding, and structural polymorphism. Ferroelectric semiconductor field-effect transistors (FeS-FETs) provide an ideal architecture to harness this coupling. Here, we demonstrate gate-tunable negative differential resistance (NDR) with high peak-to-valley ratios and hysteretic output conductance in In2Se3 FeS-FETs. Combining high-resolution electron microscopy with electrical transport measurements, we attribute the NDR to a field-induced, volatile phase transition from a low-resistance alpha-2H phase to a high-resistance state. Atomic scale ex-situ imaging reveals that in-plane electric fields (Vd) drive interlayer sliding, rotational misalignments that generate Moire patterns, and intralayer shear-together producing stress induced phase transitions. Out-of-plane field however results in robust non-volatile polarization switching. These mechanistic insights highlight both the promise of two dimensional ferroelectric devices for multifunctional nanoelectronics and alternative computing paradigms, and the intrinsic limitations of In2Se3 field-effect transistors for conventional ferroelectric memory applications.

cond-mat.mtrl-sci↗

A facile vector substrate platform via BaTiO3 membrane transfer enables high quality solution processed epitaxial PZT on silicon

The direct integration of high-performance ferroelectric oxides with silicon remains challenging due to lattice mismatch, thermal incompatibility, and the need for high-temperature epitaxial growth. Here, a hybrid integration approach is demonstrated in which crystalline BaTiO3 (BTO) membranes are first transferred onto Pt coated Si substrates and subsequently used as vector substrates (VS) for the growth of epitaxial (001) Pb(Zr0.52Ti0.48)O3 (PZT) thin films via chemical solution deposition (CSD). A KI and HCl based etchant enables rapid and complete dissolution of the SrVO3 sacrificial layer in about 30 minutes, reducing the release time from days to minutes compared with conventional water based approaches to dissolve AVO3 and AMoO3 (A is Ca, Sr, Ba). The BTO VS imposes dominant (00l) out of plane orientation and in plane cube on cube epitaxy in the overlying PZT. Devices exhibit remnant polarization 10 to 12 micro coulomb/cm2 and coercive field of 100 kV/cm, with stable switching to 10^8 cycles on the VS. From piezoelectric butterfly loops, we extract effective d33 of 70 pm/V for PZT on VS, and 54 pm/V for PZT grown on conventional Pt Si substrates. This approach demonstrates a scalable and cost effective route for integrating functional ferroelectric materials onto silicon and offers a promising platform for future CMOS compatible oxide electronics.

cond-mat.mtrl-sci↗

Synchronous polarization switching at sub-coercive fields through stochastic resonance in ferroelectric thin-film capacitors

Stochastic resonance (SR) is a phenomenon by which the presence of noise in a non-linear system allows for detection of a weak sub-threshold signal, or in a bi-stable system allows for sub-coercive switching between the two states. Simple theory suggests that SR occurs when the Kramers rate (rk) of the bistable system, which is a function of noise and applied voltage, is twice the drive frequency (fsignal). Here, we demonstrate the synchronous switching of polarization with a sub-coercive voltage waveform, in a thin film ferroelectric lead zirconium titanate (PZT) capacitor through SR. We employ independent figures of merit (FOM) such as cross-covariance, output power and signal-to-noise ratio to experimentally identify the optimal noise for synchronous switching. We further experimentally measure the Kramers time in the ferroelectric, and show that FOMs indeed peak near the noise predicted by the SR condition. We also model the device characteristics using the stochastic Time Dependent Landau Ginzburg (TDGL) formulation, and capture the experimentally observed polarization switching under application of sub-coercive voltage, assisted by noise. Finally, we show a proof-of-concept implementation of detecting sub-threshold frequency-shift-key signals (FSK) in noisy communication channels using our ferroelectric PZT devices.

physics.app-ph↗

Hafnia-based Phase-Change Ferroelectric Steep-Switching FETs on a 2-D MoS$_2$ platform

Ferroelectric field-effect transistors integrated on 2D semiconducting platforms are extremely relevant for low power electronics. Here, we propose and demonstrate a novel phase-change ferroelectric field effect transistor (PCFE-FET) for steep switching applications. Our gate stack is engineered as a ferroelectric Lanthanum doped hafnium oxide (LHO) proximity coupled with Mott insulator Ti$_x$O$_{2x-1}$(N$_y$) and is integrated onto a 2D MoS$_2$ channel. The interplay of partial polarization switching in the ferroelectric LHO layer and reversible field-tunable metal-insulator transition (MIT) in Ti$_x$O$_{2x-1}$(N$_y$) layer concomitantly triggers polar to non-polar phase transition in the LHO layer between 200 and 220 K. This results in distinctive step-like features in the channel current during DC measurements, and random current fluctuations in high-speed measurements with slim anticlockwise hysteresis. Our devices show subthreshold slopes as steep as 25 mV/dec at 210 K, breaking the Boltzmann limit. Our gate stack is also potentially tunable for operation at temperatures of interest, presenting innovative gate stack engineering approaches for low-power computing solutions.

physics.app-ph↗

Epitaxial growth and stabilization of perovskite phase EuNiO3 thin films through RF sputtering

Phase change materials (PCMs) that exhibit volatile resistive switching are promising for emulating neuronal oscillators. Charge transfer insulators, such as ReNiO3 (where Re represents rare earth metals like Pr, Nd, Sm, Eu...), form a family of PCMs with tunable metal-insulator transition (MIT) temperatures across a broad range. Notably, MIT can be adjusted via chemical doping or strain engineering. EuNiO3, in particular, is an attractive choice for oscillator devices given its bulk transition temperature (TMI) of approximately 190°C, which is well above room temperature, reducing crosstalk issues while remaining low enough to support energy-efficient applications. We demonstrate a method to stabilize high-quality epitaxial EuNiO3 thin films through scalable reactive RF sputtering and post-annealing, optimizing oxygen partial pressures and annealing temperatures across two substrates. Growth at low or zero oxygen partial pressures resulted in amorphous samples, while higher pressures improved crystallinity but led to the stabilization of Ruddlesden-Popper (RP) phases [An+1BnO3n+1] and associated faults. Post-annealing enhanced crystallinity in all samples, transforming RP phases and faults toward the perovskite phase. We conducted operando XRD and transport measurements on our films, finding the transition temperatures of perovskite phase samples grown on LAO and LSAT to be approximately 300°C and 250°C, respectively. We attribute the increase in TMI for LAO samples to in-plane compressive strain (-0.76%), which reduces the Ni-O-Ni bond angles in-plane. Similarly, LSAT samples experience in-plane tensile strain (2.1%), which decreases out-of-plane Ni-O-Ni bond angles, increasing TMI compared to bulk. However, this is counteracted by oxygen vacancies due to lowered formation energies. Films that stabilized in RP phases did not exhibit any transition.

cond-mat.mtrl-sci↗

Wavelength-dependent anisotropic light-matter interaction in 2D ferroelectric In2Se3

The anisotropic light-matter interactions in 2D materials have garnered significant attention for their potential to develop futuristic polarization-based optoelectronic devices, such as photodetectors and photo-actuators. In this study, we investigate the polarization-dependent interactions in ferroelectric 3R alpha-In2Se3 using Angle-Resolved Polarized Raman Spectroscopy (ARPRS) with different excitation lasers. Our experimental findings supported by complementary Density Functional Theory calculations demonstrate that the light-matter interactions depend not only on the crystallographic orientation but also on the excitation energy. Scanning transmission electron microscopy (STEM) confirms the highly anisotropic 3R crystal structure of alpha-In2Se3. This anisotropy in crystal structure facilitates significant optical anisotropy, driven by a complex interplay of electron-photon and electron-phonon interactions, which is reflected in the complex nature of the Raman tensor elements. These anisotropy interactions extend to the materials electrical response under light illumination. Remarkably, the anisotropic photo-response can be tuned by both polarization and wavelength of the incident light, making In2Se3 a promising material for advanced polarization-sensitive photodetection applications.

cond-mat.mtrl-sci↗

Free Standing Epitaxial Oxides Through Remote Epitaxy: The Role of the Evolving Graphene Microstructure

Remote epitaxy has garnered considerable attention as a promising method that facilitates the growth of thin films that replicate the crystallographic characteristics of a substrate by utilizing two-dimensional (2D) material interlayers like graphene. The resulting film can be exfoliated to form a freestanding membrane, and the substrate, if expensive, can be reused. However, atomically thin 2-D materials are susceptible to damage before and during film growth in the chamber, leading to a poor epitaxy. Oxide remote epitaxy using graphene, the most commonly available 2D material, is particularly challenging because the conventional conditions employed for the growth of epitaxial oxides also degrade graphene. In this study, we show for the first time that a direct correlation exists between the microstructure of graphene, its getting defective on exposure to the pulsed laser deposition plume, and the crystalline quality of the barium titanate film deposited on top. A controlled aperture method was used to reduce graphene damage. Even so, the degree of damage is more at the graphene grain boundaries than within the grains. Large grain-sized greater than 300 microns, graphene suffered less damage and yielded a film comparable to that grown directly on a strontium titanate substrate with a rocking curve half width of 0.6 degrees. Using large grain-sized bi-layer graphene, 4 mm x 5 mm oxide layers were successfully exfoliated and transferred onto SiOx-Si. These insights pave the way for the heterogeneous integration of functional oxides on foreign substrates, holding significant implications for commercializing perovskite oxides by integrating them with Si-CMOS and flexible electronics.

cond-mat.mtrl-sci↗

Room temperature Mott transistor based on resistive switching in disordered V2O3 films grown on Si

Electric field-induced giant resistive switching triggered by insulator-to-metal transition (IMT) is one of the promising approaches for developing a new class of electronics often referred to as Mottronics. Achieving this resistive switching by minimal external field at room temperature is of paramount research and technological interest. Mott-IMT is often associated with structural modification, which is very important for optoelectronic and actuator applications. Here, we report a giant resistive switching of about 900 % at room temperature in disordered polycrystalline V2O3-Si thin film stabilized at the IMT phase boundary and associated structural transformation under a small electric field. The increase of electron population in the a1g band under the field is responsible for the Mott gap collapse that drives the structural transition. Furthermore, we also fabricated a room temperature Mott-FET with a channel ON/OFF resistive ratio of about 15. This study provides a fundamental mechanism of the Mott-IMT in V2O3 as well as its device applications.

cond-mat.mtrl-sci↗

Heterogeneous integration of high endurance ferroelectric and piezoelectric epitaxial BaTiO$_3$ devices on Si

Integrating epitaxial BaTiO$_3$ (BTO) with Si is essential for leveraging its ferroelectric, piezoelectric, and nonlinear optical properties in microelectronics. Recently, heterogeneous integration approaches that involve growth of BTO on ideal substrates followed by transfer to a desired substrate show promise of achieving excellent device-quality films. However, beyond simple demonstrations of the existence of ferroelectricity, robust devices with high endurance were not yet demonstrated on Si using the latter approach. Here, using a novel two-step approach to synthesize epitaxial BTO using pulsed laser deposition (PLD) on water soluble Sr3Al2O7 (SAO) (on SrTiO$_3$ (STO) substrates), we demonstrate successful integration of high-quality BTO capacitors on Si, with Pr of 7 uC/cm2, Ec 150 kV/cm, ferroelectric and electromechanical endurance of greater than $10^6$ cycles. We further address the challenge of cracking and disintegration of thicker films by first transferring a large area (5 mm x 5 mm) of the templated layer of BTO (~30 nm thick) on the desired substrate, followed by the growth of high-quality BTO on this substrate, as revealed by HRXRD and HRSTEM measurements. These templated Si substrates offer a versatile platform for integrating any epitaxial complex oxides with diverse functionalities onto any inorganic substrate.

physics.app-ph↗