arXiv subjects

Ming Yang

Publications and source records attributed to Ming Yang.

At least 199 records · Page 11Linked to original sources

arXiv2024

MapLocNet: Coarse-to-Fine Feature Registration for Visual Re-Localization in Navigation Maps

Robust localization is the cornerstone of autonomous driving, especially in challenging urban environments where GPS signals suffer from multipath errors. Traditional localization approaches rely on high-definition (HD) maps, which consist of precisely annotated landmarks. However, building HD map is expensive and challenging to scale up. Given these limitations, leveraging navigation maps has emerged as a promising low-cost alternative for localization. Current approaches based on navigation maps can achieve highly accurate localization, but their complex matching strategies lead to unacceptable inference latency that fails to meet the real-time demands. To address these limitations, we propose a novel transformer-based neural re-localization method. Inspired by image registration, our approach performs a coarse-to-fine neural feature registration between navigation map and visual bird's-eye view features. Our method significantly outperforms the current state-of-the-art OrienterNet on both the nuScenes and Argoverse datasets, which is nearly 10%/20% localization accuracy and 30/16 FPS improvement on single-view and surround-view input settings, separately. We highlight that our research presents an HD-map-free localization method for autonomous driving, offering cost-effective, reliable, and scalable performance in challenging driving environments.

cs.CV↗

arXiv2024

Self Adaptive Threshold Pseudo-labeling and Unreliable Sample Contrastive Loss for Semi-supervised Image Classification

Semi-supervised learning is attracting blooming attention, due to its success in combining unlabeled data. However, pseudo-labeling-based semi-supervised approaches suffer from two problems in image classification: (1) Existing methods might fail to adopt suitable thresholds since they either use a pre-defined/fixed threshold or an ad-hoc threshold adjusting scheme, resulting in inferior performance and slow convergence. (2) Discarding unlabeled data with confidence below the thresholds results in the loss of discriminating information. To solve these issues, we develop an effective method to make sufficient use of unlabeled data. Specifically, we design a self adaptive threshold pseudo-labeling strategy, which thresholds for each class can be dynamically adjusted to increase the number of reliable samples. Meanwhile, in order to effectively utilise unlabeled data with confidence below the thresholds, we propose an unreliable sample contrastive loss to mine the discriminative information in low-confidence samples by learning the similarities and differences between sample features. We evaluate our method on several classification benchmarks under partially labeled settings and demonstrate its superiority over the other approaches.

cs.CV↗

arXiv2024

Hybrid Feature Collaborative Reconstruction Network for Few-Shot Fine-Grained Image Classification

Our research focuses on few-shot fine-grained image classification, which faces two major challenges: appearance similarity of fine-grained objects and limited number of samples. To preserve the appearance details of images, traditional feature reconstruction networks usually enhance the representation ability of key features by spatial feature reconstruction and minimizing the reconstruction error. However, we find that relying solely on a single type of feature is insufficient for accurately capturing inter-class differences of fine-grained objects in scenarios with limited samples. In contrast, the introduction of channel features provides additional information dimensions, aiding in better understanding and distinguishing the inter-class differences of fine-grained objects. Therefore, in this paper, we design a new Hybrid Feature Collaborative Reconstruction Network (HFCR-Net) for few-shot fine-grained image classification, which includes a Hybrid Feature Fusion Process (HFFP) and a Hybrid Feature Reconstruction Process (HFRP). In HFRP, we fuse the channel features and the spatial features. Through dynamic weight adjustment, we aggregate the spatial dependencies between arbitrary two positions and the correlations between different channels of each image to increase the inter-class differences. Additionally, we introduce the reconstruction of channel dimension in HFRP. Through the collaborative reconstruction of channel dimension and spatial dimension, the inter-class differences are further increased in the process of support-to-query reconstruction, while the intra-class differences are reduced in the process of query-to-support reconstruction. Ultimately, our extensive experiments on three widely used fine-grained datasets demonstrate the effectiveness and superiority of our approach.

cs.CV↗

arXiv2024

Cross-Modal Attention Alignment Network with Auxiliary Text Description for zero-shot sketch-based image retrieval

In this paper, we study the problem of zero-shot sketch-based image retrieval (ZS-SBIR). The prior methods tackle the problem in a two-modality setting with only category labels or even no textual information involved. However, the growing prevalence of Large-scale pre-trained Language Models (LLMs), which have demonstrated great knowledge learned from web-scale data, can provide us with an opportunity to conclude collective textual information. Our key innovation lies in the usage of text data as auxiliary information for images, thus leveraging the inherent zero-shot generalization ability that language offers. To this end, we propose an approach called Cross-Modal Attention Alignment Network with Auxiliary Text Description for zero-shot sketch-based image retrieval. The network consists of three components: (i) a Description Generation Module that generates textual descriptions for each training category by prompting an LLM with several interrogative sentences, (ii) a Feature Extraction Module that includes two ViTs for sketch and image data, a transformer for extracting tokens of sentences of each training category, finally (iii) a Cross-modal Alignment Module that exchanges the token features of both text-sketch and text-image using cross-attention mechanism, and align the tokens locally and globally. Extensive experiments on three benchmark datasets show our superior performances over the state-of-the-art ZS-SBIR methods.

cs.CV↗

arXiv2024

Crowd-Sourced NeRF: Collecting Data from Production Vehicles for 3D Street View Reconstruction

Recently, Neural Radiance Fields (NeRF) achieved impressive results in novel view synthesis. Block-NeRF showed the capability of leveraging NeRF to build large city-scale models. For large-scale modeling, a mass of image data is necessary. Collecting images from specially designed data-collection vehicles can not support large-scale applications. How to acquire massive high-quality data remains an opening problem. Noting that the automotive industry has a huge amount of image data, crowd-sourcing is a convenient way for large-scale data collection. In this paper, we present a crowd-sourced framework, which utilizes substantial data captured by production vehicles to reconstruct the scene with the NeRF model. This approach solves the key problem of large-scale reconstruction, that is where the data comes from and how to use them. Firstly, the crowd-sourced massive data is filtered to remove redundancy and keep a balanced distribution in terms of time and space. Then a structure-from-motion module is performed to refine camera poses. Finally, images, as well as poses, are used to train the NeRF model in a certain block. We highlight that we present a comprehensive framework that integrates multiple modules, including data selection, sparse 3D reconstruction, sequence appearance embedding, depth supervision of ground surface, and occlusion completion. The complete system is capable of effectively processing and reconstructing high-quality 3D scenes from crowd-sourced data. Extensive quantitative and qualitative experiments were conducted to validate the performance of our system. Moreover, we proposed an application, named first-view navigation, which leveraged the NeRF model to generate 3D street view and guide the driver with a synthesized video.

cs.CV↗

arXiv2024

SS-ADA: A Semi-Supervised Active Domain Adaptation Framework for Semantic Segmentation

Semantic segmentation plays an important role in intelligent vehicles, providing pixel-level semantic information about the environment. However, the labeling budget is expensive and time-consuming when semantic segmentation model is applied to new driving scenarios. To reduce the costs, semi-supervised semantic segmentation methods have been proposed to leverage large quantities of unlabeled images. Despite this, their performance still falls short of the accuracy required for practical applications, which is typically achieved by supervised learning. A significant shortcoming is that they typically select unlabeled images for annotation randomly, neglecting the assessment of sample value for model training. In this paper, we propose a novel semi-supervised active domain adaptation (SS-ADA) framework for semantic segmentation that employs an image-level acquisition strategy. SS-ADA integrates active learning into semi-supervised semantic segmentation to achieve the accuracy of supervised learning with a limited amount of labeled data from the target domain. Additionally, we design an IoU-based class weighting strategy to alleviate the class imbalance problem using annotations from active learning. We conducted extensive experiments on synthetic-to-real and real-to-real domain adaptation settings. The results demonstrate the effectiveness of our method. SS-ADA can achieve or even surpass the accuracy of its supervised learning counterpart with only 25% of the target labeled data when using a real-time segmentation model. The code for SS-ADA is available at https://github.com/ywher/SS-ADA.

cs.CV↗

arXiv2024

Monocular Localization with Semantics Map for Autonomous Vehicles

Accurate and robust localization remains a significant challenge for autonomous vehicles. The cost of sensors and limitations in local computational efficiency make it difficult to scale to large commercial applications. Traditional vision-based approaches focus on texture features that are susceptible to changes in lighting, season, perspective, and appearance. Additionally, the large storage size of maps with descriptors and complex optimization processes hinder system performance. To balance efficiency and accuracy, we propose a novel lightweight visual semantic localization algorithm that employs stable semantic features instead of low-level texture features. First, semantic maps are constructed offline by detecting semantic objects, such as ground markers, lane lines, and poles, using cameras or LiDAR sensors. Then, online visual localization is performed through data association of semantic features and map objects. We evaluated our proposed localization framework in the publicly available KAIST Urban dataset and in scenarios recorded by ourselves. The experimental results demonstrate that our method is a reliable and practical localization solution in various autonomous driving localization tasks.

cs.CV↗

arXiv2024

DeCoOp: Robust Prompt Tuning with Out-of-Distribution Detection

Vision-language models (VLMs), such as CLIP, have demonstrated impressive zero-shot capabilities for various downstream tasks. Their performance can be further enhanced through few-shot prompt tuning methods. However, current studies evaluate the performance of learned prompts separately on base and new classes. This evaluation lacks practicality for real-world applications since downstream tasks cannot determine whether the data belongs to base or new classes in advance. In this paper, we explore a problem setting called Open-world Prompt Tuning (OPT), which involves tuning prompts on base classes and evaluating on a combination of base and new classes. By introducing Decomposed Prompt Tuning framework (DePT), we theoretically demonstrate that OPT can be solved by incorporating out-of-distribution detection into prompt tuning, thereby enhancing the base-to-new discriminability. Based on DePT, we present a novel prompt tuning approach, namely, Decomposed Context Optimization (DeCoOp), which introduces new-class detectors and sub-classifiers to further enhance the base-class and new-class discriminability. Experimental results on 11 benchmark datasets validate the effectiveness of DePT and demonstrate that DeCoOp outperforms current state-of-the-art methods, providing a significant 2% average accuracy improvement.

cs.CV↗

arXiv2024

Tactics2D: A Highly Modular and Extensible Simulator for Driving Decision-making

Simulation is a prospective method for generating diverse and realistic traffic scenarios to aid in the development of driving decision-making systems. However, existing simulators often fall short in diverse scenarios or interactive behavior models for traffic participants. This deficiency underscores the need for a flexible, reliable, user-friendly open-source simulator. Addressing this challenge, Tactics2D adopts a modular approach to traffic scenario construction, encompassing road elements, traffic regulations, behavior models, physics simulations for vehicles, and event detection mechanisms. By integrating numerous commonly utilized algorithms and configurations, Tactics2D empowers users to construct their driving scenarios effortlessly, just like assembling building blocks. Users can effectively evaluate the performance of driving decision-making models across various scenarios by leveraging both public datasets and user-collected real-world data. For access to the source code and community support, please visit the official GitHub page for Tactics2D at https://github.com/WoodOxen/Tactics2D.

cs.LG↗

arXiv2024

Unpaired Multi-view Clustering via Reliable View Guidance

This paper focuses on unpaired multi-view clustering (UMC), a challenging problem where paired observed samples are unavailable across multiple views. The goal is to perform effective joint clustering using the unpaired observed samples in all views. In incomplete multi-view clustering, existing methods typically rely on sample pairing between views to capture their complementary. However, that is not applicable in the case of UMC. Hence, we aim to extract the consistent cluster structure across views. In UMC, two challenging issues arise: uncertain cluster structure due to lack of label and uncertain pairing relationship due to absence of paired samples. We assume that the view with a good cluster structure is the reliable view, which acts as a supervisor to guide the clustering of the other views. With the guidance of reliable views, a more certain cluster structure of these views is obtained while achieving alignment between reliable views and other views. Then we propose Reliable view Guidance with one reliable view (RG-UMC) and multiple reliable views (RGs-UMC) for UMC. Specifically, we design alignment modules with one reliable view and multiple reliable views, respectively, to adaptively guide the optimization process. Also, we utilize the compactness module to enhance the relationship of samples within the same cluster. Meanwhile, an orthogonal constraint is applied to latent representation to obtain discriminate features. Extensive experiments show that both RG-UMC and RGs-UMC outperform the best state-of-the-art method by an average of 24.14\% and 29.42\% in NMI, respectively.

cs.CV↗

arXiv2024

Tianyu: search for the second solar system and explore the dynamic universe

Giant planets like Jupiter and Saturn, play important roles in the formation and habitability of Earth-like planets. The detection of solar system analogs that have multiple cold giant planets is essential for our understanding of planet habitability and planet formation. Although transit surveys such as Kepler and TESS have discovered thousands of exoplanets, these missions are not sensitive to long period planets due to their limited observation baseline. The Tianyu project, comprising two 1-meter telescopes (Tianyu-I and II), is designed to detect transiting cold giant planets in order to find solar system analogs. Featuring a large field of view and equipped with a high-speed CMOS camera, Tianyu-I will perform a high-precision photometric survey of about 100 million stars, measuring light curves at hour-long cadence. The candidates found by Tianyu-I will be confirmed by Tianyu-II and other surveys and follow-up facilities through multi-band photometry, spectroscopy, and high resolution imaging. Tianyu telescopes will be situated at an elevation about 4000 meters in Lenghu, China. With a photometric precision of 1% for stars with V < 18 mag, Tianyu is expected to find more than 300 transiting exoplanets, including about 12 cold giant planets, over five years. A five-year survey of Tianyu would discover 1-2 solar system analogs. Moreover, Tianyu is also designed for non-exoplanetary exploration, incorporating multiple survey modes covering timescales from sub-seconds to months, with a particular emphasis on events occurring within the sub-second to hour range. It excels in observing areas such as infant supernovae, rare variable stars and binaries, tidal disruption events, Be stars, cometary activities, and interstellar objects. These discoveries not only enhance our comprehension of the universe but also offer compelling opportunities for public engagement in scientific exploration.

astro-ph.IM↗

arXiv2024

SkySense: A Multi-Modal Remote Sensing Foundation Model Towards Universal Interpretation for Earth Observation Imagery

Prior studies on Remote Sensing Foundation Model (RSFM) reveal immense potential towards a generic model for Earth Observation. Nevertheless, these works primarily focus on a single modality without temporal and geo-context modeling, hampering their capabilities for diverse tasks. In this study, we present SkySense, a generic billion-scale model, pre-trained on a curated multi-modal Remote Sensing Imagery (RSI) dataset with 21.5 million temporal sequences. SkySense incorporates a factorized multi-modal spatiotemporal encoder taking temporal sequences of optical and Synthetic Aperture Radar (SAR) data as input. This encoder is pre-trained by our proposed Multi-Granularity Contrastive Learning to learn representations across different modal and spatial granularities. To further enhance the RSI representations by the geo-context clue, we introduce Geo-Context Prototype Learning to learn region-aware prototypes upon RSI's multi-modal spatiotemporal features. To our best knowledge, SkySense is the largest Multi-Modal RSFM to date, whose modules can be flexibly combined or used individually to accommodate various tasks. It demonstrates remarkable generalization capabilities on a thorough evaluation encompassing 16 datasets over 7 tasks, from single- to multi-modal, static to temporal, and classification to localization. SkySense surpasses 18 recent RSFMs in all test scenarios. Specifically, it outperforms the latest models such as GFM, SatLas and Scale-MAE by a large margin, i.e., 2.76%, 3.67% and 3.61% on average respectively. We will release the pre-trained weights to facilitate future research and Earth Observation applications.

cs.CV↗

arXiv2024

Zippo: Zipping Color and Transparency Distributions into a Single Diffusion Model

Beyond the superiority of the text-to-image diffusion model in generating high-quality images, recent studies have attempted to uncover its potential for adapting the learned semantic knowledge to visual perception tasks. In this work, instead of translating a generative diffusion model into a visual perception model, we explore to retain the generative ability with the perceptive adaptation. To accomplish this, we present Zippo, a unified framework for zipping the color and transparency distributions into a single diffusion model by expanding the diffusion latent into a joint representation of RGB images and alpha mattes. By alternatively selecting one modality as the condition and then applying the diffusion process to the counterpart modality, Zippo is capable of generating RGB images from alpha mattes and predicting transparency from input images. In addition to single-modality prediction, we propose a modality-aware noise reassignment strategy to further empower Zippo with jointly generating RGB images and its corresponding alpha mattes under the text guidance. Our experiments showcase Zippo's ability of efficient text-conditioned transparent image generation and present plausible results of Matte-to-RGB and RGB-to-Matte translation.

cs.CV↗

arXiv2024

Pink: Unveiling the Power of Referential Comprehension for Multi-modal LLMs

Multi-modal Large Language Models (MLLMs) have shown remarkable capabilities in various multi-modal tasks. Nevertheless, their performance in fine-grained image understanding tasks is still limited. To address this issue, this paper proposes a new framework to enhance the fine-grained image understanding abilities of MLLMs. Specifically, we present a new method for constructing the instruction tuning dataset at a low cost by leveraging annotations in existing datasets. A self-consistent bootstrapping method is also introduced to extend existing dense object annotations into high-quality referring-expression-bounding-box pairs. These methods enable the generation of high-quality instruction data which includes a wide range of fundamental abilities essential for fine-grained image perception. Moreover, we argue that the visual encoder should be tuned during instruction tuning to mitigate the gap between full image perception and fine-grained image perception. Experimental results demonstrate the superior performance of our method. For instance, our model exhibits a 5.2% accuracy improvement over Qwen-VL on GQA and surpasses the accuracy of Kosmos-2 by 24.7% on RefCOCO_val. We have also attained the top rank on the leaderboard of MMBench. This promising performance is achieved by training on only publicly available data, making it easily reproducible. The models, datasets, and codes are publicly available at https://github.com/SY-Xuan/Pink.

cs.CV↗

arXiv2024

Discovery of a Magnetic Topological Semimetal Eu$_3$In$_2$As$_4$ with a Single Pair of Weyl Points

Magnetic Weyl semimetal (MWS) is a unique topological state with open surface Fermi arc states and other exotic transport phenomena. However, most reported MWSs show multiple pairs of Weyl points and complicated Fermi surfaces, which increases the difficulty of the investigation into the intrinsic chiral transport property. In this wor, we successfully synthesized a soft magnetic Weyl semimetal Eu$_3$In$_2$As$_4$ with a single pair of Weyl points under magnetic fields. The Shubnikov de Haas (SdH) oscillation with a single frequency, as well as a linear hall resistance with the same carrier density, is observed up to 50 Tesla, indicating a single pair of Weyl points around the Fermi level with a massless fermion ($m^* = 0.121 m_0$, $π$ Berry phase). Such a single pair of Weyl points is further confirmed by the density functional theory calculations. The magnetic ordering and band topology can be easily tuned by the external magnetic field. The field-induced MWS Eu$_3$In$_2$As$_4$ with a single pair of Weyl points is a good platform to detect chiral transport properties, including possible quantum anomalous Hall effect.

cond-mat.mes-hall↗

arXiv2024

One-Step Multi-View Clustering Based on Transition Probability

The large-scale multi-view clustering algorithms, based on the anchor graph, have shown promising performance and efficiency and have been extensively explored in recent years. Despite their successes, current methods lack interpretability in the clustering process and do not sufficiently consider the complementary information across different views. To address these shortcomings, we introduce the One-Step Multi-View Clustering Based on Transition Probability (OSMVC-TP). This method adopts a probabilistic approach, which leverages the anchor graph, representing the transition probabilities from samples to anchor points. Our method directly learns the transition probabilities from anchor points to categories, and calculates the transition probabilities from samples to categories, thus obtaining soft label matrices for samples and anchor points, enhancing the interpretability of clustering. Furthermore, to maintain consistency in labels across different views, we apply a Schatten p-norm constraint on the tensor composed of the soft labels. This approach effectively harnesses the complementary information among the views. Extensive experiments have confirmed the effectiveness and robustness of OSMVC-TP.

cs.LG↗

arXiv2024

Learning Dynamic Tetrahedra for High-Quality Talking Head Synthesis

Recent works in implicit representations, such as Neural Radiance Fields (NeRF), have advanced the generation of realistic and animatable head avatars from video sequences. These implicit methods are still confronted by visual artifacts and jitters, since the lack of explicit geometric constraints poses a fundamental challenge in accurately modeling complex facial deformations. In this paper, we introduce Dynamic Tetrahedra (DynTet), a novel hybrid representation that encodes explicit dynamic meshes by neural networks to ensure geometric consistency across various motions and viewpoints. DynTet is parameterized by the coordinate-based networks which learn signed distance, deformation, and material texture, anchoring the training data into a predefined tetrahedra grid. Leveraging Marching Tetrahedra, DynTet efficiently decodes textured meshes with a consistent topology, enabling fast rendering through a differentiable rasterizer and supervision via a pixel loss. To enhance training efficiency, we incorporate classical 3D Morphable Models to facilitate geometry learning and define a canonical space for simplifying texture learning. These advantages are readily achievable owing to the effective geometric representation employed in DynTet. Compared with prior works, DynTet demonstrates significant improvements in fidelity, lip synchronization, and real-time performance according to various metrics. Beyond producing stable and visually appealing synthesis videos, our method also outputs the dynamic meshes which is promising to enable many emerging applications.

cs.CV↗

arXiv2024

The Star Formation History in Local Group Galaxies. I. Ten Dwarf Galaxies

The star formation histories (SFHs) of galaxies provide valuable insights into galaxy evolution and stellar physics. Understanding the SFHs enables the study of chemical enrichment of galaxies, star formation triggered by interactions, and the behavior of various stellar populations. This work investigates the SFHs of ten dwarf galaxies in the Local Group (LG), which spans a wide range of types, masses, luminosities, and metallicities. The analysis is based on our new sample of the member stars in the LG after removing the foreground dwarf stars by the near-infrared color-color diagram and the Gaia astrometric information. The samples include the most complete and pure red supergiants and asymptotic giant branch stars to gain valuable insights into the recent SFHs of the galaxies. The CMD fitting method is introduced to measure the SFH. The Padova isochrones are used to generate initial model CMDs, accounting for photometric errors and completeness through star field simulations to match the completeness and error distributions of the observed CMDs. Subsequently, the SFHs, distance modulus, and metallicity of the ten dwarf galaxies are determined by fitting the CMDs. The results indicate that the star formation rates (SFRs) of dwarf irregulars show a gradual increase, while those of dwarf ellipticals exhibit a gradual decrease from the past to the present. Furthermore, this work shows that the star formation activity in dwarf ellipticals persisted up to 30 Myr ago. A significant increasing feature in the SFH of NGC 6822 reveals star formation activity triggered by an interaction event.

astro-ph.GA↗