arXiv subjects

Ming Yang

Publications and source records attributed to Ming Yang.

At least 181 records · Page 10Linked to original sources

arXiv2024

HomoMatcher: Dense Feature Matching Results with Semi-Dense Efficiency by Homography Estimation

Feature matching between image pairs is a fundamental problem in computer vision that drives many applications, such as SLAM. Recently, semi-dense matching approaches have achieved substantial performance enhancements and established a widely-accepted coarse-to-fine paradigm. However, the majority of existing methods focus on improving coarse feature representation rather than the fine-matching module. Prior fine-matching techniques, which rely on point-to-patch matching probability expectation or direct regression, often lack precision and do not guarantee the continuity of feature points across sequential images. To address this limitation, this paper concentrates on enhancing the fine-matching module in the semi-dense matching framework. We employ a lightweight and efficient homography estimation network to generate the perspective mapping between patches obtained from coarse matching. This patch-to-patch approach achieves the overall alignment of two patches, resulting in a higher sub-pixel accuracy by incorporating additional constraints. By leveraging the homography estimation between patches, we can achieve a dense matching result with low computational cost. Extensive experiments demonstrate that our method achieves higher accuracy compared to previous semi-dense matchers. Meanwhile, our dense matching results exhibit similar end-point-error accuracy compared to previous dense matchers while maintaining semi-dense efficiency.

cs.CV↗

arXiv2024

Anchor-free Clustering based on Anchor Graph Factorization

Anchor-based methods are a pivotal approach in handling clustering of large-scale data. However, these methods typically entail two distinct stages: selecting anchor points and constructing an anchor graph. This bifurcation, along with the initialization of anchor points, significantly influences the overall performance of the algorithm. To mitigate these issues, we introduce a novel method termed Anchor-free Clustering based on Anchor Graph Factorization (AFCAGF). AFCAGF innovates in learning the anchor graph, requiring only the computation of pairwise distances between samples. This process, achievable through straightforward optimization, circumvents the necessity for explicit selection of anchor points. More concretely, our approach enhances the Fuzzy k-means clustering algorithm (FKM), introducing a new manifold learning technique that obviates the need for initializing cluster centers. Additionally, we evolve the concept of the membership matrix between cluster centers and samples in FKM into an anchor graph encompassing multiple anchor points and samples. Employing Non-negative Matrix Factorization (NMF) on this anchor graph allows for the direct derivation of cluster labels, thereby eliminating the requirement for further post-processing steps. To solve the method proposed, we implement an alternating optimization algorithm that ensures convergence. Empirical evaluations on various real-world datasets underscore the superior efficacy of our algorithm compared to traditional approaches.

cs.LG↗

arXiv2024

Multi-head Sequence Tagging Model for Grammatical Error Correction

To solve the Grammatical Error Correction (GEC) problem , a mapping between a source sequence and a target one is needed, where the two differ only on few spans. For this reason, the attention has been shifted to the non-autoregressive or sequence tagging models. In which, the GEC has been simplified from Seq2Seq to labeling the input tokens with edit commands chosen from a large edit space. Due to this large number of classes and the limitation of the available datasets, the current sequence tagging approaches still have some issues handling a broad range of grammatical errors just by being laser-focused on one single task. To this end, we simplified the GEC further by dividing it into seven related subtasks: Insertion, Deletion, Merge, Substitution, Transformation, Detection, and Correction, with Correction being our primary focus. A distinct classification head is dedicated to each of these subtasks. the novel multi-head and multi-task learning model is proposed to effectively utilize training data and harness the information from related task training signals. To mitigate the limited number of available training samples, a new denoising autoencoder is used to generate a new synthetic dataset to be used for pretraining. Additionally, a new character-level transformation is proposed to enhance the sequence-to-edit function and improve the model's vocabulary coverage. Our single/ensemble model achieves an F0.5 of 74.4/77.0, and 68.6/69.1 on BEA-19 (test) and CoNLL-14 (test) respectively. Moreover, evaluated on JFLEG test set, the GLEU scores are 61.6 and 61.7 for the single and ensemble models, respectively. It mostly outperforms recently published state-of-the-art results by a considerable margin.

cs.CL↗

arXiv2024

The Star Formation History of Nearby Galaxies: A Machine Learning Approach

Reproducing color-magnitude diagrams (CMDs) of star-resolved galaxies is one of the most precise methods for measuring the star formation history (SFH) of nearby galaxies back to the earliest time. The upcoming big data era poses challenges to the traditional numerical technique in its capacity to deal with vast amounts of data, which motivates us to explore the feasibility of employing machine learning networks in this field. In this study, we refine the synthetic CMD method with a state-of-the-art theoretical stellar evolution model to simulate the properties of stellar populations, incorporate the convolutional neural network (CNN) in the fitting process to enhance the efficiency, and innovate the initial stellar mass estimation to improve the flexibility. The fine-tuned deep learning network, named \texttt{SFHNet}, has been tested with synthetic data and further validated with photometric data collected from the Hubble Space Telescope (\textit{HST}). The derived SFHs are largely in accordance with those reported in the literature. Furthermore, the network provides detailed insights into the distribution of stellar density, initial stellar mass, and star formation rate (SFR) over the age-metallicity map. The application of the deep learning network not only measures the SFH accurately but also enhances the synthetic CMD method's efficiency and flexibility, thereby facilitating a more comprehensive and in-depth understanding of nearby galaxies.

astro-ph.GA↗

arXiv2024

Exciton dissociation in two-dimensional transition metal dichalcogenides: Excited states and substrate effects

Exciton dissociation plays a crucial role in the performance of optoelectronic devices based on two-dimensional (2D) transition metal dichalcogenides (TMDs). In this work, we investigate the effect of an in-plane electric field on the exciton resonance states in MX$_2$ (M = Mo, W; X = S, Se) monolayers and few-layers using the complex coordinate rotation method and the Lagrange-Laguerre polynomial expansion of the wave function. The exciton properties are well described within the Mott-Wannier model incorporating the nonlocal Keldysh potential. Our calculations reveal that an electric field effectively dissociates excitons, with excited states being more easily dissociated than the ground state. The critical field for exciton dissociation is found to be smaller in WX$_2$ monolayers compared to MoX$_2$ monolayers due to the smaller exciton reduced mass. Furthermore, the presence of a dielectric substrate and an increase in the number of MX$_2$ layers enhance the exciton susceptibility to the electric field, lowering the critical field for dissociation. The dependence of exciton properties on the number of MX$_2$ layers can be well described by power functions. These findings provide valuable insights for the design and optimization of high-performance optoelectronic devices based on 2D TMDs.

cond-mat.mtrl-sci↗

arXiv2024

Existence of limit of multivariable function

This article provides several theorems regarding the existence of limit for multivariable function, among which Theorem 1 and Theorem 3 relax the requirement for sequence of Heine's definition of limit. These results address the question of which paths need to be considered to determine the existence of limit for multivariable function.

math.GM↗

arXiv2024

HOTVCOM: Generating Buzzworthy Comments for Videos

In the era of social media video platforms, popular ``hot-comments'' play a crucial role in attracting user impressions of short-form videos, making them vital for marketing and branding purpose. However, existing research predominantly focuses on generating descriptive comments or ``danmaku'' in English, offering immediate reactions to specific video moments. Addressing this gap, our study introduces \textsc{HotVCom}, the largest Chinese video hot-comment dataset, comprising 94k diverse videos and 137 million comments. We also present the \texttt{ComHeat} framework, which synergistically integrates visual, auditory, and textual data to generate influential hot-comments on the Chinese video dataset. Empirical evaluations highlight the effectiveness of our framework, demonstrating its excellence on both the newly constructed and existing datasets.

cs.CV↗

arXiv2024

Mass-loss Rate of Highly Evolved Stars in the Magellanic Clouds

Asymptotic giant branch stars (AGBs) and red supergiant stars (RSGs) exhibit significant mass loss phenomena and are considered important sources of interstellar dust. In this work, we employed an uniform method of spectral energy distribution fitting to analyze a large, and hence statistically significant, sample of approximately 40,000 RSGs and AGBs in the Magellanic Clouds (MCs), providing a new catalog of evolved stars that includes stellar parameters and dust properties. Our results reveal that the total dust-production rate (DPR) of the Large Magellanic Cloud is approximately $9.69\times10^{-6}\,\rm{M_{\odot }\, yr^{-1}}$, while it is around $1.75\times10^{-6}\,\rm{M_{\odot }\,yr^{-1}}$ for the Small Magellanic Cloud, with a few stars significantly contributing to the total DPR. No significant differences were observed in the contributions to DPR from carbon-rich and oxygen-rich (O-rich) evolved stars in the MCs. We explored the relations between stellar parameters (luminosity, infrared color, period, amplitude) and mass-loss rate (MLR) for evolved stars. A prominent turning point at $\log{(L/L_{\odot})} \approx 4.4$ appears in the luminosity-MLR diagram of RSGs, potentially related to the mass-loss mechanism of RSGs. The luminosity-MLR relation of AGBs is highly scattered. The DPR of AGBs shows a clear change with pulsation period and amplitude, with DPR exhibiting a drastic increase at pulsation periods of approximately 300 days and I-band amplitudes greater than 0.5 mag. Metallicity has some impact on the DPR of O-rich stars, with lower metallicity seeming to result in lower mean DPR and a higher proportion of optically thin stars.

astro-ph.SR↗

arXiv2024

Mimicking large spot-scanning radiation fields for proton FLASH preclinical studies with a robotic motion platform

Previously, a synchrotron-based horizontal proton beamline (87.2 MeV) was successfully commissioned to deliver radiation doses in FLASH and conventional dose rate modes to small fields and volumes. In this study, we developed a strategy to increase the effective radiation field size using a custom robotic motion platform to automatically shift the positions of biological samples. The beam was first broadened with a thin tungsten scatterer and shaped by customized brass collimators for irradiating cell/organoid cultures in 96-well plates (a 7-mm-diameter circle) or for irradiating mice (1-cm2 square). Motion patterns of the robotic platform were written in G-code, with 9-mm spot spacing used for the 96-well plates and 10.6-mm spacing for the mice. The accuracy of target positioning was verified with a self-leveling laser system. The dose delivered in the experimental conditions was validated with EBT-XD film attached to the 96-well plate or the back of the mouse. Our film-measured dose profiles matched Monte Carlo calculations well (1D gamma pass rate >95%). The FLASH dose rates were 113.7 Gy/s for cell/organoid irradiation and 191.3 Gy/s for mouse irradiation. These promising results indicate that this robotic platform can be used to effectively increase the field size for preclinical experiments with proton FLASH.

physics.med-ph↗

arXiv2024

Construction Methods Based on Minimum Weight Distribution for Polar Codes with Successive Cancellation List Decoding

Minimum weight distribution (MWD) is an important metric to calculate the first term of union bound called minimum weight union bound (MWUB). In this paper, we first prove the maximum likelihood (ML) performance approaches MWUB as signal-to-noise ratio (SNR) goes to infinity and provide the deviation when MWD and SNR are given. Then, we propose a nested reliability sequence, namely MWD sequence, to construct polar codes independently of channel information. In the sequence, synthetic channels are sorted by partial MWD which is used to evaluate the influence of information bit on MWD and we prove the MWD sequence is the optimum sequence evaluated by MWUB for polar codes obeying partial order. Finally, we introduce an entropy constraint to establish a relationship between list size and MWUB and propose a heuristic construction method named entropy constraint bit-swapping (ECBS) algorithm, where we initialize information set by the MWD sequence and gradually swap information bit and frozen bit to satisfy the entropy constraint. The simulation results show the MWD sequence is more suitable for constructing polar codes with short code length than the polar sequence in 5G and the ECBS algorithm can improve MWD to show better performance as list size increases.

cs.IT↗

arXiv2024

A Survey for Foundation Models in Autonomous Driving

The advent of foundation models has revolutionized the fields of natural language processing and computer vision, paving the way for their application in autonomous driving (AD). This survey presents a comprehensive review of more than 40 research papers, demonstrating the role of foundation models in enhancing AD. Large language models contribute to planning and simulation in AD, particularly through their proficiency in reasoning, code generation and translation. In parallel, vision foundation models are increasingly adapted for critical tasks such as 3D object detection and tracking, as well as creating realistic driving scenarios for simulation and testing. Multi-modal foundation models, integrating diverse inputs, exhibit exceptional visual understanding and spatial reasoning, crucial for end-to-end AD. This survey not only provides a structured taxonomy, categorizing foundation models based on their modalities and functionalities within the AD domain but also delves into the methods employed in current research. It identifies the gaps between existing foundation models and cutting-edge AD approaches, thereby charting future research directions and proposing a roadmap for bridging these gaps.

cs.LG↗

arXiv2024

Physics-Informed Neural Networks and Beyond: Enforcing Physical Constraints in Quantum Dissipative Dynamics

Neural networks (NNs) accelerate simulations of quantum dissipative dynamics. Ensuring that these simulations adhere to fundamental physical laws is crucial, but has been largely ignored in the state-of-the-art NN approaches. We show that this may lead to implausible results measured by violation of the trace conservation. To recover the correct physical behavior, we develop physics-informed NNs (PINNs) that mitigate the violations to a good extend. Beyond that, we propose a novel uncertainty-aware approach that enforces perfect trace conservation by design, surpassing PINNs.

physics.chem-ph↗

arXiv2024

StyleTokenizer: Defining Image Style by a Single Instance for Controlling Diffusion Models

Despite the burst of innovative methods for controlling the diffusion process, effectively controlling image styles in text-to-image generation remains a challenging task. Many adapter-based methods impose image representation conditions on the denoising process to accomplish image control. However these conditions are not aligned with the word embedding space, leading to interference between image and text control conditions and the potential loss of semantic information from the text prompt. Addressing this issue involves two key challenges. Firstly, how to inject the style representation without compromising the effectiveness of text representation in control. Secondly, how to obtain the accurate style representation from a single reference image. To tackle these challenges, we introduce StyleTokenizer, a zero-shot style control image generation method that aligns style representation with text representation using a style tokenizer. This alignment effectively minimizes the impact on the effectiveness of text prompts. Furthermore, we collect a well-labeled style dataset named Style30k to train a style feature extractor capable of accurately representing style while excluding other content information. Experimental results demonstrate that our method fully grasps the style characteristics of the reference image, generating appealing images that are consistent with both the target image style and text prompt. The code and dataset are available at https://github.com/alipay/style-tokenizer.

cs.CV↗

arXiv2024

Egocentric Vision Language Planning

We explore leveraging large multi-modal models (LMMs) and text2image models to build a more general embodied agent. LMMs excel in planning long-horizon tasks over symbolic abstractions but struggle with grounding in the physical world, often failing to accurately identify object positions in images. A bridge is needed to connect LMMs to the physical world. The paper proposes a novel approach, egocentric vision language planning (EgoPlan), to handle long-horizon tasks from an egocentric perspective in varying household scenarios. This model leverages a diffusion model to simulate the fundamental dynamics between states and actions, integrating techniques like style transfer and optical flow to enhance generalization across different environmental dynamics. The LMM serves as a planner, breaking down instructions into sub-goals and selecting actions based on their alignment with these sub-goals, thus enabling more generalized and effective decision-making. Experiments show that EgoPlan improves long-horizon task success rates from the egocentric view compared to baselines across household scenarios.

cs.CV↗

arXiv2024

ParkingE2E: Camera-based End-to-end Parking Network, from Images to Planning

Autonomous parking is a crucial task in the intelligent driving field. Traditional parking algorithms are usually implemented using rule-based schemes. However, these methods are less effective in complex parking scenarios due to the intricate design of the algorithms. In contrast, neural-network-based methods tend to be more intuitive and versatile than the rule-based methods. By collecting a large number of expert parking trajectory data and emulating human strategy via learning-based methods, the parking task can be effectively addressed. In this paper, we employ imitation learning to perform end-to-end planning from RGB images to path planning by imitating human driving trajectories. The proposed end-to-end approach utilizes a target query encoder to fuse images and target features, and a transformer-based decoder to autoregressively predict future waypoints. We conducted extensive experiments in real-world scenarios, and the results demonstrate that the proposed method achieved an average parking success rate of 87.8% across four different real-world garages. Real-vehicle experiments further validate the feasibility and effectiveness of the method proposed in this paper.

cs.CV↗

arXiv2024

POA: Pre-training Once for Models of All Sizes

Large-scale self-supervised pre-training has paved the way for one foundation model to handle many different vision tasks. Most pre-training methodologies train a single model of a certain size at one time. Nevertheless, various computation or storage constraints in real-world scenarios require substantial efforts to develop a series of models with different sizes to deploy. Thus, in this study, we propose a novel tri-branch self-supervised training framework, termed as POA (Pre-training Once for All), to tackle this aforementioned issue. Our approach introduces an innovative elastic student branch into a modern self-distillation paradigm. At each pre-training step, we randomly sample a sub-network from the original student to form the elastic student and train all branches in a self-distilling fashion. Once pre-trained, POA allows the extraction of pre-trained models of diverse sizes for downstream tasks. Remarkably, the elastic student facilitates the simultaneous pre-training of multiple models with different sizes, which also acts as an additional ensemble of models of various sizes to enhance representation learning. Extensive experiments, including k-nearest neighbors, linear probing evaluation and assessments on multiple downstream tasks demonstrate the effectiveness and advantages of our POA. It achieves state-of-the-art performance using ViT, Swin Transformer and ResNet backbones, producing around a hundred models with different sizes through a single pre-training session. The code is available at: https://github.com/Qichuzyy/POA.

cs.CV↗

arXiv2024

Accelerating Pre-training of Multimodal LLMs via Chain-of-Sight

This paper introduces Chain-of-Sight, a vision-language bridge module that accelerates the pre-training of Multimodal Large Language Models (MLLMs). Our approach employs a sequence of visual resamplers that capture visual details at various spacial scales. This architecture not only leverages global and local visual contexts effectively, but also facilitates the flexible extension of visual tokens through a compound token scaling strategy, allowing up to a 16x increase in the token count post pre-training. Consequently, Chain-of-Sight requires significantly fewer visual tokens in the pre-training phase compared to the fine-tuning phase. This intentional reduction of visual tokens during pre-training notably accelerates the pre-training process, cutting down the wall-clock training time by ~73%. Empirical results on a series of vision-language benchmarks reveal that the pre-train acceleration through Chain-of-Sight is achieved without sacrificing performance, matching or surpassing the standard pipeline of utilizing all visual tokens throughout the entire training process. Further scaling up the number of visual tokens for pre-training leads to stronger performances, competitive to existing approaches in a series of benchmarks.

cs.CV↗

arXiv2024

BLOS-BEV: Navigation Map Enhanced Lane Segmentation Network, Beyond Line of Sight

Bird's-eye-view (BEV) representation is crucial for the perception function in autonomous driving tasks. It is difficult to balance the accuracy, efficiency and range of BEV representation. The existing works are restricted to a limited perception range within 50 meters. Extending the BEV representation range can greatly benefit downstream tasks such as topology reasoning, scene understanding, and planning by offering more comprehensive information and reaction time. The Standard-Definition (SD) navigation maps can provide a lightweight representation of road structure topology, characterized by ease of acquisition and low maintenance costs. An intuitive idea is to combine the close-range visual information from onboard cameras with the beyond line-of-sight (BLOS) environmental priors from SD maps to realize expanded perceptual capabilities. In this paper, we propose BLOS-BEV, a novel BEV segmentation model that incorporates SD maps for accurate beyond line-of-sight perception, up to 200m. Our approach is applicable to common BEV architectures and can achieve excellent results by incorporating information derived from SD maps. We explore various feature fusion schemes to effectively integrate the visual BEV representations and semantic features from the SD map, aiming to leverage the complementary information from both sources optimally. Extensive experiments demonstrate that our approach achieves state-of-the-art performance in BEV segmentation on nuScenes and Argoverse benchmark. Through multi-modal inputs, BEV segmentation is significantly enhanced at close ranges below 50m, while also demonstrating superior performance in long-range scenarios, surpassing other methods by over 20% mIoU at distances ranging from 50-200m.

cs.CV↗